RESUMO

BACKGROUND: The aim of this research was to analyse the current literature on displaced dental implants in the mandibular body, including local and systemic variables related to their cause, and to identify the most frequent location. METHODS: The study conducted a search of three databases (Pubmed, Scopus, and Web of Science) using specific index terms such as 'dental implant', 'displacement', 'dislocation', 'displaced', and 'mandible'. The analysis focused on the direction of displacement and the characteristics of the bone tissue (bone quality, density, and quantity) in cases where dental implants were displaced. RESULTS: A total of 371 articles were obtained. Thirteen of these articles were selected and read in full. To define bone quality, the Lekholm and Zarb classification, modified by Rosas et al., was used. The type II-B bone, which is characterized by thick cortical bone surrounding cancellous bone with extremely wide medullary spaces, presented the largest number of complications. Twenty-two cases were found in which the displacement direction was horizontal. Of these, four were displaced vestibularly, fourteen lingually, and four remained in the center. Additionally, 24 cases presented vertical displacement, with 12 displaced towards the inferior border of the mandible, 9 towards the middle or adjacent to the inferior dental nerve canal, and 3 above the inferior dental nerve canal. CONCLUSION: The accidental displacement of implants within the mandibular body is associated with various risk factors, including the characteristics of the bony trabeculum and the size of the medullary spaces. It is reasonable to suggest that only an adequate pre-surgical diagnostic evaluation, with the help of high-resolution tomographic images that allow a previous evaluation of these structures, will help to have better control over the other factors, thus minimizing the risk of displacement.

Assuntos

RESUMO

OBJECTIVES: The objective of this long-term retrospective study was to evaluate the fracture rate and the risk factors associated with the fracture of 3.3 mm narrow diameter implants (NDIs). MATERIALS AND METHODS: A total of 524 records of patients rehabilitated with 3.3 mm NDIs between 1997 and 2015 were assessed. Data on patients, implants, and prostheses were collected, and descriptive analysis of the variables was performed. NDIs were separated into 2 groups: "fractured" and "non-fractured", and a multilevel logistic regression model was applied to identify the risk factors associated with NDI fracture. RESULTS: Eighty-four patients were removed from the analysis for interrupting follow-up or presenting failures other than fractures. Of the 440 patients included (64.66 ± 13.4 years), 272 were females (61.8%), and 168 males (38.2%), and mean follow-up time was 129 ± 47.1 months. Of the 1428 NDIs, 15 (1.05%) in 9 patients (2.04%) fractured during the studied period. Ten fractures (66.66%) happened in 6 patients (66.66%) showing signs of parafunction. NDI with modified sandblasted, large grit, acid-etched surface was the only implant variable to show a protective statistical significance (p = .0439). CONCLUSIONS: NDI fracture was a rare event in the studied sample. NDIs manufactured with modified sandblasted, large grit, acid-etched surface may provide extra protection against NDI fracture. Patient-specific factors and implant characteristics should be carefully considered to limit the risk of fracture of 3.3 mm NDIs.

RESUMO

A maxillary sinus lift was performed without bone grafting in a 23-year-old female patient who required the placement of a dental implant in the edentulous area of tooth 16. The clinical and tomographic evaluation made it possible to plan and perform the maxillary sinus lift using the transcrestal approach and without the need for bone grafting. The residual ridge of 6mm allowed the placement of a simultaneous dental implant. After 6 months of tomographic follow-up, before prosthetic loading, a vertical bone height of 8.83 mm was achieved, resulting in a vertical bone gain of 2.83 mm. Additionally, an adequate integration of the dental implant was observed without postoperative complications. Transcrestal sinus lift without the use of bone graft is shown to be a viable, safe and effective technique for the simultaneous placement of dental implants in patients with bone atrophy in the maxillary area. This technique offers advantages such as reduced surgical time, less morbidity, lower cost and a faster healing process compared to conventional methods.

RESUMO

BACKGROUND: Peri-implantitis poses significant challenges in clinical practice, necessitating effective therapeutic strategies. This case report presents a comprehensive treatment approach for managing peri-implantitis, focusing on resective surgery, including implantoplasty and long-term maintenance. METHODS: We describe the case of a 50-year-old female patient with peri-implantitis affecting a maxillary full-arch implant-supported rehabilitation. The treatment strategy involved resective surgery with implantoplasty, a new maxillary overdenture, and a regular maintenance care schedule of three to four visits per year. Clinical and radiographic assessments were performed over a 10-year follow-up period. RESULTS: Post-treatment, all maxillary implants demonstrated no probing depths exceeding 4 mm, absence of bleeding on probing or suppuration, minimal plaque accumulation, and no further bone loss. Resective surgery with implantoplasty seems to have effectively provided submucosal decontamination and created a supra-mucosal implant surface conducive to oral hygiene. Despite regular maintenance, some mandibular implants exhibited bone loss during the follow-up period and were managed using the same approach as for the maxillary implants. CONCLUSIONS: The comprehensive treatment approach yielded favorable long-term clinical and radiographic outcomes, underscoring the effectiveness of the combined strategies in managing peri-implantitis. Nevertheless, the potential for recurrence or the development of peri-implantitis in new implants, even after a decade of successful treatment and strict maintenance, highlights the importance of ongoing, diligent care and regular evaluations to promptly diagnose and address these issues. KEY POINTS: Why is this case new information? The long-term effectiveness of peri-implantitis treatments, particularly involving implantoplasty, remains under-documented. This case provides insights from a 10-year follow-up on the efficacy of a comprehensive approach for managing peri-implantitis. Furthermore, these findings illustrate the potential for new peri-implantitis to develop, regardless of sustained peri-implant health and rigorous maintenance. This finding highlights the critical role of continuous monitoring for the early diagnosis and treatment of new implants exhibiting peri-implantitis. What are the keys to the successful management of this case? The success of this case hinged on a comprehensive treatment approach that combines surgical intervention associated with implantoplasty to remove implant threads, thereby creating smoother surfaces, less retentive for plaque accumulation. A critical aspect of this approach was also the redesign of prosthetic components to improve hygiene accessibility, continuous monitoring, and consistent maintenance care. What are the primary limitations to success in this case? The primary challenge in achieving success in this case was the prevention of new implants with peri-implantitis, despite the patient's consistent adherence to the maintenance program. Moreover, a critical evaluation of implant characteristics, particularly their susceptibility to mechanical failures, is paramount when performing implantoplasty. Furthermore, aligning patient expectations with the realistic esthetic and functional outcomes of the treatment is often challenging. PLAIN LANGUAGE SUMMARY: Peri-implantitis, an inflammatory disease affecting dental implants, is quite challenging to treat. This case report describes how a 50-year-old woman with this condition was successfully treated and maintained over 10 years. The approach included a surgical method called resective surgery, which involved reshaping the bone defect (osteoplasty) and smoothing the implant surface (implantoplasty). Additionally, she was fitted with a new upper denture and had regular follow-up visits three to four times a year. After ten years, her upper implants were stable with no signs of infection or further bone loss, and they were easy to keep clean. Some of her lower implants did experience inflammation with progressive bone loss during this time, but they were managed using the same surgical procedure as for her upper implants. This 10-year case report highlights positive and stable clinical results after resective surgery for treating peri-implantitis and the importance of an interdisciplinary approach and regular check-ups for maintenance, early diagnosis, and management of peri-implantitis over the long term.

RESUMO

(1) Objective: The aim of this study was to assess the biological behavior of bone tissue on a machined surface (MS) and modifications made by a laser beam (LS) and by a laser beam incorporated with hydroxyapatite (HA) using a biomimetic method without thermic treatment (LHS). (2) Methods: Scanning electron microscopy coupled with energy-dispersive X-ray spectrometry (SEM/EDX) was performed before and after installation in the rabbit tibiae. A total of 20 Albinus rabbits randomly received 30 implants of 3.75 × 10 mm in the right and left tibias, with two implants on each surface in each tibia. In the animals belonging to the 4-week euthanasia period group, intramuscular application of the fluorochromes calcein and alizarin was performed. In implants placed mesially in the tibiofemoral joint, biomechanical analysis was performed by means of a removal torque (N/cm). The tibias with the implants located distally to the joint were submitted for analysis by confocal laser microscopy (mineral apposition rate) and for histometric analysis by bone contact implant (%BIC) and newly formed bone area (%NBA). (3) Results: The SEM showed differences between the surfaces. The biomechanical analysis revealed significant differences in removal torque values between the MSs and LHSs over a 2-week period. Over a 4-week period, both the LSs and LHSs demonstrated removal torque values statistically higher than the MSs. BIC of the LHS implants were statistically superior to MS at the 2-week period and LHS and LS surfaces were statistically superior to MS at the 4-week period. Statistical analysis of the NBA of the implants showed difference between the LHS and MS in the period of 2 weeks. (4) Conclusions: The modifications of the LSs and LHSs provided important physicochemical modifications that favored the deposition of bone tissue on the surface of the implants.

RESUMO

This clinical report presents a technique to reconstruct extensively resected mandibles using a combination of autologous bone grafts and additive manufacturing techniques. Mandibular defects, often arising from trauma, tumors, or congenital anomalies, can severely impact both function and aesthetics. Conventional reconstruction methods have their limitations, often resulting in suboptimal outcomes. In these reports, we detail clinical cases where patients with different mandibular defects underwent reconstructive surgery. In each instance, autologous grafts were harvested to ensure the restoration of native bone tissue, while advanced virtual planning techniques were employed for precise graft design and dental implant placement. The patients experienced substantial improvements in masticatory function, speech, and facial aesthetics. Utilizing autologous grafts minimized the risk of rejection and complications associated with foreign materials. The integration of virtual planning precision allowed customized solutions, reducing surgical duration and optimizing implant positioning. These 2 cases underscores the potential of combining autologous grafts with virtual planning precision and dental implants produced by additive manufacturing for mandible reconstruction.

RESUMO

The objective of this study was to evaluate microbial leakage by means of genome counts, through the implant-abutment interface in dental implants with different Morse taper abutments. Fifty-six samples were prepared and divided in four groups: CMC TB (14 Cylindrical Implants-14 TiBase Abutments), CMX TB (14 Conical Implants-14 TiBase Abutments), CMX PU (14 Conical Implants-14 Universal Abutment) and CMX U (14 Tapered Implants-14 UCLA Abutments). Assemblies had their interface submerged in saliva as the contaminant. Samples were subjected either to thermomechanical cycling (2 × 106 mechanical cycles with frequency of 5 Hz and load of 120 N simultaneously with thermal cycles of 5-55 °C) or thermal cycling (5-55 °C). After cycling, the contents from the inner parts of assemblies were collected and analyzed using the Checkerboard DNA-DNA hybridization technique. Significant differences in the total genome counts were found after both thermomechanical or thermal cycling: CMX U > CMX PU > CMX TB > CMC TB. There were also significant differences in individual bacterial counts in each of the groups (p < 0.05). Irrespective of mechanical cycling, the type of abutment seems to influence not only the total microbial leakage through the interface, but also seems to significantly reflect differences considering individual target species.

RESUMO

BACKGROUND: The aim of this case study is to present the rationality and scientific evidence of a new design for a double (DA) and triple (TA) dental abutment-implant with their specific new concept of biodynamic optimized peri-implant tissue (BOPiT). METHODS: The innovative design of these abutments with a paraboloid geometry was based on BOPiT, simultaneously involving the principles of mechanobiology, biotensegrity, and mechanotransduction. Thus, 37 consecutive individuals/43 cases rehabilitated with single dental implant using the innovative DA (n = 28) and TA (n = 15) on 43 implants were included in this case study. The DA and TA support 2 or 3 dental crowns on a single implant, respectively. Clinic and radiographic examinations were presented at T1 (loading after 4 months) and T2 [final examination with an average follow-up time of 7.2 years (>3 to 12 years)]. RESULTS: At T2, mean scores for plaque index, peri-implant bleeding on probing, and peri-implant probing depth were low, depicting healthy peri-implant conditions. All radiographic images showed insignificant annual marginal bone loss (0.022 ± 0.05 mm) when compared to T1, reflecting great bone stability. CONCLUSION: DA and TA, based on the BOPiT concept, represent an advantageous, simple and non-invasive mechanism for the longevity and healthy regulation of the peri-implant tissues.

RESUMO

OBJECTIVES: To evaluate the influence of multiplanar reconstruction thickness on the detection of peri-implant bone defects with a standalone zirconia implant and compare it to when another implant is in the vicinity using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Five dry human mandibles were used to create twenty implant sites in the second premolar and first molar regions. The OP300 Maxio was used to acquire CBCT images (90 kVp, 6.3 mA, 5 × 5 cm FOV, and 0.125 mm3 voxel size) before and after creating 3 mm peri-implant bone defects in the buccal aspect of the premolar region. Half of the scans featured a single zirconia implant in the premolar region, while the others had two implants in the premolar and molar regions. Three reconstruction thicknesses (0.125 mm, 1 mm, and 2 mm) were considered for the multiplanar reconstruction analyses. Five oral and maxillofacial radiologists assessed the detection of peri-implant bone defects using a 5-point scale. Diagnostic parameters were calculated and compared using Two-way ANOVA (α = .05). RESULTS: The studied factors showed no significant influence on the diagnosis of peri-implant bone defects (p > .05). Diagnostic performance was notably higher with a single implant, especially with a 2-mm reconstruction thickness (AUC = 0.88, sensitivity = 0.68, specificity = 0.94). Although the differences were not statistically significant, the results were more modest when two implants were present (AUC = 0.80, sensitivity = 0.58, specificity = 0.82). CONCLUSIONS: The presence of an adjacent zirconia implant and variations in reconstruction thickness did not influence the detection of 3 mm buccal peri-implant bone defects on CBCT images.

RESUMO

Dental implant surface properties such as roughness, wettability, and porosity ensure cell interaction and tissue integration. The clinical performance of dental implants depends on the crystallographic texture and protein and cell bonds to the substrates, where grain size, orientation, and inclination are parameters responsible for favoring osteoblast adhesion and limiting bacterial adhesion. The lack of consensus on the best crystallographic plan for cell adhesion prompted this systematic review, which aims to answer the following question: "What is the influence of the crystallographic plane on titanium surfaces on cell adhesion?" by evaluating the literature on the crystallographic characteristics of titanium and how these dictate topographical parameters and influence the cell adhesion of devices made from this material. It followed the Preferred Reporting Standards for Systematic Reviews and Meta-Analyses (PRISMA 2020) registered with the Open Science Framework (OSF) (osf.io/xq6kv). The search strategy was based on the PICOS method. It chose in vitro articles that analyzed crystallographic structure correlated with cell adhesion and investigated the microstructure and its effects on cell culture, different crystal orientation distributions, and the influence of crystallinity. The search strategies were applied to the different electronic databases: PubMed, Scopus, Science Direct, Embase, and Google Scholar, and the articles found were attached to the Rayyan digital platform and assessed blindly. The Joanna Bringgs Institute (JBI) tool assessed the risk of bias. A total of 248 articles were found. After removing duplicates, 192 were analyzed by title and abstract. Of these, 18 were selected for detailed reading in their entirety, 9 of which met the eligibility criteria. The included studies presented a low risk of bias. The role of the crystallographic orientation of the exposed faces in a multicrystalline material is little discussed in the scientific literature and its impact is recognized as dictating the topographical characteristics of the material that facilitate cell adhesion.

Assuntos

RESUMO

The dental implant surface plays a crucial role in osseointegration. The topography and physicochemical properties will affect the cellular functions. In this research, four distinct titanium surfaces have been studied: machined acting (MACH), acid etched (AE), grit blasting (GBLAST), and a combination of grit blasting and subsequent acid etching (GBLAST + AE). Human amniotic mesenchymal (hAMSCs) and epithelial stem cells (hAECs) isolated from the amniotic membrane have attractive stem-cell properties. They were cultured on titanium surfaces to analyze their impact on biological behavior. The surface roughness, microhardness, wettability, and surface energy were analyzed using interferometric microscopy, Vickers indentation, and drop-sessile techniques. The GBLAST and GBLAST + AE surfaces showed higher roughness, reduced hydrophilicity, and lower surface energy with significant differences. Increased microhardness values for GBLAST and GBLAST + AE implants were attributed to surface compression. Cell viability was higher for hAMSCs, particularly on GBLAST and GBLAST + AE surfaces. Alkaline phosphatase activity enhanced in hAMSCs cultured on GBLAST and GBLAST + AE surfaces, while hAECs showed no mineralization signals. Osteogenic gene expression was upregulated in hAMSCs on GBLAST surfaces. Moreover, α2 and ß1 integrin expression enhanced in hAMSCs, suggesting a surface-integrin interaction. Consequently, hAMSCs would tend toward osteoblastic differentiation on grit-blasted surfaces conducive to osseointegration, a phenomenon not observed in hAECs.

Assuntos

RESUMO

Purpose: The aim of this study was to evaluate image artifacts in the vicinity of dental implants in cone-beam computed tomography (CBCT) scans obtained with different spatial orientations, tube current levels, and metal artifact reduction algorithm (MAR) conditions. Materials and Methods: One dental implant and 2 tubes filled with a radiopaque solution were placed in the posterior region of a mandible using a surgical guide to ensure parallel alignment. CBCT scans were acquired with the mandible in 2 spatial orientations in relation to the X-ray projection plane (standard and modified) at 3 tube current levels: 5, 8, and 11 mA. CBCT scans were repeated without the implant and were reconstructed with and without MAR. The mean voxel and noise values of each tube were obtained and compared using multi-way analysis of variance and the Tukey test (α=0.05). Results: Mean voxel values were significantly higher and noise values were significantly lower in the modified orientation than in the standard orientation (P<0.05). MAR activation and tube current levels did not show significant differences in most cases of the modified spatial orientation and in the absence of the dental implant (P>0.05). Conclusion: Modifying the spatial orientation of the head increased brightness and reduced spatial orientation noise in adjacent regions of a dental implant, with no influence from the tube current level and MAR.

RESUMO

Papillon-Lefèvre syndrome (PLS) is a rare benign, autosomal recessive condition caused by a mutation in the cathepsin C gene. This alteration results in palmar-plantar hyperkeratosis, or thickening of the soles of the feet and palms of the hands, as well as aggressive periodontal disease resulting in the premature loss of deciduous and permanent teeth. The etiology is multifactorial, and is influenced by immunological, genetic or microbial factors. This case report presents a successful prosthetics oral rehabilitation with osseointegrated implants in a 48-year-old female patient with PLS. Although few reports of dental implants in patients with PLS have been published, it seems to be a possible approach in selected patients. (AU)

Assuntos

RESUMO

BACKGROUND: The aim of this study was to evaluate the incidence of preloading crestal bone loss (PLCBL) and to identify the patient-related and implant-related factors associated with PLCBL. METHODS: This retrospective cohort examined the dental records of patients who received at least one dental implant. PLCBL was defined as a reduction ⩾0.5 mm and severe PLCBL (primary variable) as a reduction ⩾1.5 mm in mesial and/or distal bone level, measured from the day of implant placement to uncovering or abutment installation/crown delivery. The incidence of PLCBL and patient and implant variables were recorded. Bivariate analysis and binary logistic regression identified factors associated with PLCBL ⩾0.5 mm and ⩾1.5 mm. RESULTS: A total of 746 dental implants placed in 361 patients from January 2011 to July 2021 was included in the analyses. Of the implants assessed, 24.4% (n = 182) exhibited PLCBL ⩾ 0.5 mm and 10.5% (n = 78) presented severe PLCBL (i.e., ⩾1.5 mm). Males (odds ratio [OR] = 1.85, 95% confidence interval [CI] = 1.11-3.07), patients with diabetes (OR = 3.33, 95% CI = 1.73-6.42), and those allergic to penicillin (OR = 3.13, 95% CI = 1.57-6.22) were more likely to experience severe PLCBL (p < 0.05). Implants placed in the anterior area (OR = 2.08, 95% CI = 1.16-3.73), with bone-level platform-abutment connection (OR = 4.73, 95% CI = 1.94-11.49) and inserted supracrestally (OR = 3.77, 95% CI = 1.84-7.72), presented a greater risk of developing severe PLCBL (p < 0.05). Implants placed in a previously grafted area presented a lower likelihood of developing severe PLCBL (OR = 0.489, 95% CI = 0.28-0.84). CONCLUSION: The incidence of PLCBL ⩾ 0.5 mm and ⩾1.5 mm was 24.4% and 10.5%, respectively. Male sex, diabetes, allergy to penicillin, anterior location, bone-level platform-abutment connection, and supracrestal implant placement are potential risk factors for severe PLCBL. A previously grafted area is a potential protective factor.

Assuntos

RESUMO

AIM: This study evaluated the impact of the partial exposition of the nonabsorbable membrane (dPTFE) on microbial colonization during bone healing. MATERIALS AND METHODS: Patients indicated for tooth extraction were randomized to dPTFE group (n = 22) - tooth extraction and alveolar ridge preservation (ARP) using an intentionally exposed dPTFE membrane and USH group (n = 22) - tooth extraction and unassisted socket healing. Biofilm samples were collected at the barrier in the dPTFE and on the natural healing site in the USH after 3 and 28 days. Samples from the inner surface of the dPTFE barrier were also collected (n = 13). The microbiome was evaluated using the Illumina MiSeq system. RESULTS: Beta diversity was different from 3 to 28 days in both groups, and at 28 days, different microbial communities were identified between therapies. The dPTFE was characterized by a higher prevalence and abundance of gram-negative and anaerobic species than USH. Furthermore, the inner surface of the dPTFE membrane was colonized by a different community than the one observed on the outer surface. CONCLUSION: Intentionally exposed dPTFE membrane modulates microbial colonization in the ARP site, creating a more homogeneous and anaerobic community on the inner and outer surfaces of the membrane. CLINICAL RELEVANCE: DPTFE promoted faster biofilm colonization and enrichment of gram-negative and anaerobes close to the regenerated site in the membrane's inner and outer surfaces. dPTFE membrane can be used exposed to the oral site, but approaches for biofilm control should still be considered. The study was retrospectively registered at Clinicaltrials.gov (NCT04329351).

Assuntos

RESUMO

OBJECTIVES: To evaluate the potential of laser-microtextured abutments (LMAs) compared to machined abutments (MAs) in peri-implant clinical and radiographic outcomes. MATERIALS AND METHODS: Eligible studies consisted of randomized clinical trials (RCTs) retrieved from MEDLINE, Web of Science, Scopus, and Embase databases. The study adhered to the PRISMA statement, and the protocol was registered at the PROSPERO (registration number CRD42023443112). The risk of bias was evaluated according to version 2 of the Cochrane risk of bias tool (RoB 2). Meta-analyses were performed using random effect models. Afterward, the GRADE approach was used to determine the certainty of evidence. RESULTS: Four RCTs were included from a total of 2,876 studies. LMAs had lower peri-implant sulcus depth at 6-8 weeks (WMD: -0.69 mm; 95% CI: -0.97, -0.40; p = 0.15, I2 = 53%) and at one year (WMD: -0.75 mm; 95% CI: -1.41, -0.09; p = 0.09, I2 = 65%), but the certainty of evidence was low. In addition, the marginal bone loss favored the LMAs group (WMD: -0.29 mm; 95% CI: -0.36, -0.21; p = 0.69, I2 = 0%) with moderate evidence. There were fewer sites with bleeding on probing in the LMAs group (WMD: -1.10; 95% CI: -1.43, -0.77; p = 0.88, i2 = 0%). There was no statistical difference between groups for the modified gingival index and modified plaque index. Furthermore, all studies were classified as having some concerns risk of bias. CONCLUSIONS: There was low to moderate certainty evidence that LMAs can favor peri-implant clinical and radiographic parameters compared to MAs. CLINICAL RELEVANCE: Laser-microtextured abutments may benefit peri-implant clinical and radiographic outcomes.

Assuntos

RESUMO

Aim: Cone beam computed tomography has become an attractive method for implant planning. However, in most cases, not all the information is taken advantage of and often the radiographic evaluation of bone quality is based on subjective assessment by the individual clinician. Therefore, the aim of this study was to examine classifications of bone tissue characteristics and methods for assessing them in dental implant planning and placement studies. Materials and Methods: Three databases (Pubmed, Scopus, Web of Science) were searched using specific index terms: "Bone quality, bone quantity, bone density, cone-beam CT and cone-beam computed tomography". Three reviewers selected titles and analyzed abstracts according to inclusion and exclusion criteria. Some descriptions of bone tissue characteristics (bone quality, density, and quantity) used before or during dental implant placement were selected and categorized. Results: The search yielded 442 titles. A total of 32 articles were selected and read in full text. Seventeen articles were considered relevant. Different classification systems were found to evaluate bone tissue characteristics as well as different examination protocols. Thirteen publications included in this review reported on bone quality and quantity using the Lekholm and Zarb classification. However, only four studies implemented and/or proposed modifications of the Lekholm and Zarb system. Four other publications described bone quality according to different classification systems such as Misch, University of California Los Angeles (UCLA), or Trisi and Rao. The assessment methods were often briefly described (or not described at all in one publication). Of the articles analyzed, five presented observer performance, whereas three presented diagnostic accuracy of the assessment method. Conclusion: Currently, there are different classification systems applied to dental implant planning and placement, particularly regarding whether bone quality or quantity affects treatment outcomes. However, most authors have not validated the diagnostic accuracy and reproducibility of the classification used. Therefore, it is necessary to develop a classification system consistent with characteristics of bone tissue, taking into consideration an adequate description of bone tissue assessment methods, their diagnostic accuracy, and observer performance.

RESUMO

OBJECTIVE: The aim of this report is to present the complete workflow of 3D virtual patient for planning and performing implant surgery with magnetically retained 3D-printed stackable guides. CLINICAL CONSIDERATIONS: A 3D-printed stackable system was proposed based on bone, dental, and facial references. Initially, a 66-year-old male patient was digitalized through photographs, cone beam computed tomography, and intraoral scans (Virtuo Vivo, Straumann). All files were merged to create a 3D virtual patient in the planning software (coDiagnostiX, Straumann). Sequential stackable guides were designed, printed, and cured. Magnets were inserted into connectors, and the interim protheses received color characterization. Four mounted guides were produced for the specific purposes of pin fixation, bone reduction, implant placement, and immediate provisionalization. After surgery and healing period, patient digital data were updated. Final implant positions were compared to planned values and inconsistencies were clinically acceptable. The mean angular deviation was 5.4° (3.2-7.3) and mean 3D discrepancies were of 0.90 mm (0.46-1.12) at the entry point and 1.68 mm (1.00-2.20) at implant apex. Case follow-up revealed stability, patient's comfort, and no intercurrences. CONCLUSION: Magnetically retained stackable guides provide treatment accuracy and reduce surgical and prosthetic complications. The projected virtual patient enhances decision-making and communication between the multidisciplinary team and the patient, while decreases time and costs. CLINICAL SIGNIFICANCE: Bidimensional diagnosis and freehand implant placement have limitations and outcomes often rely on professionals' expertise. Performing facially driven virtual planning improves treatment predictability. This approach promotes function, esthetic harmony, and patient satisfaction. Implant guided surgery and 3D printed prostheses constitute a reproducible digital workflow that can be implemented into clinical practice to optimize dental care.

RESUMO

The present short-term retrospective study evaluated the implant survival rate and peri-implant bone loss around additive-manufactured titanium implants placed in sinuses grafted with Plenum Osshp (Plenum Bioengenharia, Jundia, SP, Brazil) (70HA:30ß-TCP) material. A total of 39 implants were inserted after 23 sinus floor elevation procedures in 16 consecutive patients. Prosthetic rehabilitation included fixed partial prostheses (three units), single crowns (eleven units), and fixed full arches (three units). Clinical and radiographic parameters of implant-supported restorations were evaluated after at least one year of occlusal loading. The implant-crown success criteria included the absence of pain, suppuration, and clinical mobility, an average distance between the implant shoulder and the first visible bone contact (DIB) < 1.0 mm from the initial surgery, and the absence of prosthetic complications at the implant-abutment interface. The overall cumulative implant survival rate was 97.43%. No prosthetic complications at the implant-abutment interface were reported. After one year, the mean DIB was 0.23 mm ± 0.14. Within the limits of this retrospective study, it can be concluded that 70 HA:30 ß-TCP allowed stable and reliable bone support to maintain healthy conditions around titanium dental implants produced by additive manufacturing.

RESUMO

PURPOSE: The aim of this study is to delineate the safety zone concerning the anteriorization of the AL and correlate it with the behavior of the AL, analyzing its feasibility. METHODS: Adhering to the Joanna Briggs Institute (JBI) manual guidelines, both the protocol and this review were conducted based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses Extension for Scoping Reviews (PRISMA-ScR) checklist. MeSH terms, combined with free terms, were utilized to search for articles in the following databases: Embase, LILACS, LIVIVO, PubMed/MEDLINE, Scopus, Web of Science, and grey literature. RESULTS: Fifteen articles were select following the eligibility criteria. An average safe zone of 4.75 mm in humans was observed, with a prevalence 60.8% and average anterior length of the AL of 2.09 mm in humans. CONCLUSION: The AL has varied patterns across different populations, then, it could not be asserted a 100% safe zone. Preoperative analysis of the AL with CBCT is always necessary. While it could be stated that a safe zone should be employed as an inviolable region, stipulated measures of a safe zone should be regarded as an area of greater attention in preoperative planning.

Assuntos