RESUMO

O objetivo do presente estudo foi identificar microrganismos das espécies Enterococcus spp e Enterobacteriaceae em dentes com canais radiculares infectados portadores de infecção primária e/ou secundária/persistente. Métodos: A amostra do presente estudo foi de 23 pacientes que apresentaram necessidade de tratamento ou retratamento endodôntico. Foram coletadas amostras de 28 dentes infectados usando pontas de papel absorventes estéreis, transportadas em solução salina, diluídas, plaqueadas e incubadas em estufa de cultura bacteriológica. Para o crescimento de microrganismos foram utilizados jarros com gerador de atmosfera de anaerobiose. Colônias microbianas foram isoladas, caracterizadas e identificadas. Os dados coletados foram estatisticamente analisados com a utilização do software SPSS for Windows 10.0 (SPSS Inc., USA). Resultados: Foi isolada somente uma cepa do gênero Enterococcus spp, e nenhuma espécie do gênero Enterobacteriaceae. Das coletas microbiológicas realizadas em 28 canais radiculares, todas apresentaram crescimento microbiano em anaerobiose. Dezoito dentes apresentavam necrose pulpar e lesão periapical. Os outros 10 dentes já haviam recebido tratamento endodôntico prévio e em 6 destes houve constatação de lesão periapical, sendo que nos outros 4, não. Conclusão: Nas condições experimentais do presente estudo, pode-se concluir que não houve correlação da presença de espécies microbianas das famílias Enterococcus spp e/ou Enterobacteriaceae com infecção primária ou secundária do canal radicular.

The objective of the present study was to identify microorganisms of the Enterococcus spp and Enterobacteriaceae species in teeth with infected root canals with primary and/or secondary/persistent infection. Methods: The sample of the present study consisted of 23 patients who required endodontic treatment or retreatment. Samples of 28 infected teeth were collected using sterile absorbent paper points, transported in saline solution, diluted, plated and incubated in a bacteriological culture oven. For the growth of microorganisms, jars with an anaerobic atmosphere generator were used. Microbial colonies were isolated, characterized and identified. The collected data were statistically analyzed using the SPSS for Windows 10.0 software (SPSS Inc., USA). Results: Only one strain of the genus Enterococcus spp was isolated, and no species of the genus Enterobacteriaceae. From the microbiological collections carried out in 28 root canals, all showed microbial growth in anaerobic conditions. Eighteen teeth had pulp necrosis and periapical lesion. The other 10 teeth had already received previous endodontic treatment and in 6 of them there was a periapical lesion, and in the other 4, no. Conclusion: Under the experimental conditions of the present study, it can be concluded that there was no correlation between the presence of microbial species of the Enterococcus spp and/or Enterobacteriaceae families with primary or secondary root canal infection.

Assuntos

RESUMO

Abstract Both root canal sealer-based and supplementary protocols may influence removal of filling material during endodontic retreatment. Mesial root canals of extracted mandibular molars were prepared using HyFlex EDM 25/.08, and filled with a calcium silicate sealer (Bio-C Sealer), or an epoxy resin (AH Plus), using the single cone technique (n = 12). Retreatment was performed using ProDesign Logic (PDL) RT and PDL 35/.05. The specimens were randomly divided into two experimental groups (n = 12), and the sealers were distributed similarly. A supplementary protocol was performed with PDL 50/.01 or XP-endo Finisher. Root canal transportation and volume, in addition to the remaining filling material percentage were evaluated using high-resolution (5 µm voxel size) micro-CT. Statistical analysis was performed using t-tests (α = 0.05). Root canals filled with AH Plus presented high residual filling material (p < 0.05). Both protocols decreased residual volume of filling material in the apical third (p < 0.05). PDL 50/.01 increased the apical root canal volume (p < 0.05). No difference was observed between the systems regarding canal transportation (p > 0.05). In conclusion, AH Plus is more difficult to remove from the apical third than Bio-C Sealer. PDL 50/.01 and XP-endo Finisher enabled greater removal of filling materials in the apical third, in the retreatment of curved root canals, without promoting apical transport.

RESUMO

Objective: This study evaluated different methods of calcium hydroxide (CH) removal from root canals with simulated internal resorptions using microcomputed tomography (micro-CT). Material and Methods: Sixty acrylic resin blocks with simulated root canals and internal resorptions were prepared using a Reciproc R25 file and then filled with CH. The blocks were divided into five test groups (n=12) according to the method used for CH removal: hand files (HF), Easy Clean (EC), passive ultrasonic irrigation (PUI), XP-Endo Finisher (XP), XP-Endo Finisher + PUI (XP+PUI). The blocks were scanned using a SkyScan 1172 scanner before and after CH removal to measure the volume and percentage of CH removal. The OriginPro 2017 software was used for statistical analyses. The level of significance was set at p<0.05 for all tests. Results: No method under study removed all CH. All methods had similar results in the cervical third (P>0.05). The percentage of CH removal was significantly greater in the area of internal resorption and along the total length of the canal in the XP+PUI group (P<0.05). The best results of CH removal were found in the apical third of roots in the XP+PUI and PUI groups (P>0.05). Conclusion: No method removed all CH from the root canals, but the combined XP+PUI method removed more CH than the other methods, especially from the area of the internal resorption(AU)

Objetivo: Este estudo avaliou diferentes métodos de remoção de hidróxido de cálcio (CH) de canais radiculares com reabsorções internas simuladas por meio de microtomografia computadorizada (micro-CT). Material e Métodos: Sessenta blocos de resina acrílica com canais radiculares simulados e reabsorções internas foram preparados com lima Reciproc R25 e posteriormente preenchidos com CH. Os blocos foram divididos em cinco grupos de teste (n=12) de acordo com o método utilizado para remoção de CH: limas manuais (HF), Easy Clean (EC), irrigação ultrassônica passiva (PUI), XP-Endo Finisher (XP), XP -Endo Finalizador + PUI (XP + PUI). Os blocos foram escaneados usando um scanner SkyScan 1172 antes e depois da remoção do CH para medir o volume e a porcentagem de remoção do CH. O software OriginPro 2017 foi utilizado para análises estatísticas. O nível de significância foi estabelecido em p<0,05 para todos os testes. Resultados: Nenhum método em estudo removeu todos o CH. Todos os métodos tiveram resultados semelhantes no terço cervical (P>0,05). A porcentagem de remoção de CH foi significativamente maior na área de reabsorção interna e ao longo do comprimento total do canal no grupo XP+PUI (P<0,05). Os melhores resultados de remoção de CH foram encontrados no terço apical das raízes nos grupos XP+PUI e PUI (P>0,05). Conclusão: Nenhum método removeu todo o CH dos canais radiculares, mas o método combinado XP+PUI removeu significativamente mais CH do que os outros métodos, especialmente da área de reabsorção interna (AU)

Assuntos

RESUMO

Abstract This study aimed to identify and characterize the antimicrobial susceptibility profile of bacteria found in primary endodontic infections in the teeth of patients treated at the Dental Clinic of the University of Ribeirão Preto, São Paulo, Brazil. From September to December 2019, samples were obtained from 21 patients with primary endodontic infections. The collections were carried out in triplicate using paper cones placed close to the total length of the root canal. Bacterial isolation was performed in Brain Heart Infusion agar, Blood agar, and other selective culture media cultured at 37°C for up to 48 h under aerobiosis and microaerophilic conditions. The bacterial species were identified using the Vitek 2 automated system. The disk diffusion method on agar Müeller-Hinton was used to assess antimicrobial susceptibility with the recommended antimicrobials for each identified bacterial species. A total of 49 antibiotics were evaluated. Fifteen of the 21 samples collected showed bacterial growth, and 17 bacterial isolates were found. There were 10 different bacterial species identified: Enterococcus faecalis (four isolates), Streptococcus mitis/oralis (three isolates), Streptococcus anginosus (three isolates) being the most common, followed by Staphylococcus epidermidis, Enterococcus faecium, Streptococcus constellatus, Streptococcus alactolyticus, Enterobacter cloacae, Klebsiella variicola, and Providencia rettgeri (one isolate of each species). The analysis demonstrated significant susceptibility to most of the tested antibiotics. However, some Enterococcus isolates resisted the antibiotic's erythromycin, ciprofloxacin, and tetracycline. A Staphylococcus epidermidis isolate was characterized as multidrug-resistant. Five Streptococcus isolates were non-susceptible to all antibiotics tested.

RESUMO

Abstract The aim of this study was to compare the filling capacity in curved root canal using a new continuous wave of condensation technique (Termo Pack II, Easy Dental Equipments, Brazil) or lateral compaction. The percentage of voids in the filling of mesial root canals of mandibular molars was assessed by micro-computed tomography (micro-CT). Mesial root canals (n=24) of mandibular molars with a degree of curvature between 20° and 40° were prepared using rotary system (ProDesign Logic, Easy, Brazil) up to #35, .05 taper. The root canals were filled by using the continuous wave of condensation system or lateral compaction and AH Plus sealer (n=12). Scanning at 9 µm was performed after preparation and after filling by using micro-CT SkyScan 1176. The volumetric percentage of filling material and voids (total length and in each root canal third) were calculated. Data were analyzed using ANOVA/ Tukey and Student's t tests (α=0.05). Before the filling techniques, the root canals volume after preparation was similar (p>0.05). The root canals filled by the continuous wave of condensation technique presented the lowest percentage of voids, and the greatest percentage of filling material in total length and thirds (cervical, middle and apical) (p<0.05). Both techniques were not able of completely filling the root canals. The continuous wave of condensation technique Termo Pack II promoted better root canal filling in curved root canals, when compared with lateral compaction.

Resumen El objetivo de este estudio fue comparar la capacidad de obturación en conductos radiculares curvos utilizando una nueva técnica de condensación de onda continua (Termo Pack II, Easy Dental Equipments, Brasil) vs compactación lateral. El porcentaje de brechas en la obturación de los conductos radiculares mesiales de los molares mandibulares se evaluó mediante microtomografía computarizada (micro-CT). Se prepararon conductos radiculares mesiales (n=24) de molares mandibulares con un grado de curvatura entre 20° y 40° utilizando un sistema rotatorio (ProDesign Logic, Easy, Brasil) al #35, conicidad 0,05. Los conductos radiculares se obturaron utilizando un sistema de condensación de onda contínua o compactación lateral y cemento AH Plus (n=12). Se realizó un escaneo de 9 µm después de la preparación y después de la obturación usando el micro-CT SkyScan 1176. Se calculó el porcentaje volumétrico de material de obturación y vacíos (longitud total y en cada tercio del conducto radicular). Los datos se analizaron utilizando las pruebas ANOVA/Tukey y t de Student (α=0,05). Antes de las técnicas de obturación, el volumen de los conductos radiculares después de la preparación fue similar (p>0,05). Los conductos radiculares obturados con la técnica de condensación por onda contínua presentaron el menor porcentaje de vacíos y el mayor porcentaje de material de obturación en longitud total y en tercios (cervical, medio y apical) (p<0,05). Ambas técnicas no fueron capaces de llenar completamente los conductos radiculares. La técnica de condensación de onda contínua Termo Pack II promovió un mejor relleno del conducto radicular en conductos radiculares curvos en comparación con la compactación lateral.

Assuntos

RESUMO

The aim of this study was to assess the influence of micro-computed tomography (micro-CT) voxel size on evaluation of root canal preparation using rotary heat-treated nickel-titanium files. Curved mesial root canals of mandibular molars were prepared using ProDesign Logic 30/.05 (PDL) or HyFlex EDM 25/.08 (HEDM) (n=12). The specimens were scanned using micro-CT with 5μm of voxel size before and after root canal preparation. Images with sub-resolution of 10 and 20μm voxel sizes were obtained. The percentage of volume increase, debris and uninstrumented root canal surface were analyzed in the different voxel sizes. Data were compared using unpaired Student's t-test and ANOVA statistical tests (α=0.05). No differences were observed for percentage of volume increase, debris and instrumented surface between the root canals prepared by PDL and HEDM (p>0.05). Both systems promoted higher percentage of debris in the apical third compared to the middle third (p0.05). PDL and HEDM had similar root canal preparation capacity. Micro-CT images using different voxel sizes did not influence the results of volume increase and debris evaluation. However, images at 5µm showed greater accuracy to evaluate the percentage of uninstrumented surfaces.

El objetivo de este estudio fue evaluar la influencia del tamaño de vóxel de la microtomografía computarizada (micro-CT) en la evaluación de la preparación del conducto radicular utilizando limas rotatorias de níquel-titanio tratadas térmicamente. Se prepararon conductos radiculares mesiales curvos de molares mandibulares usando ProDesign Logic 30/.05 (PDL) o HyFlex EDM 25/.08 (HEDM) (n=12). Las muestras se escanearon usando micro-CT con un tamaño de vóxel de 5μm antes y después de la preparación del conducto radicular. Se obtuvieron imágenes con subresolución de vóxeles de 10 y 20μm. Se analizó el porcentaje de aumento de volumen, residuos y superficie del conducto radicular no instrumentado en diferentes tamaños de vóxel. Los datos se compararon usando la prueba t de Student no pareada y las pruebas estadísticas ANOVA (α=0,05). No se observaron diferencias en el porcentaje de aumento de volumen, detritus y superficie instrumentada entre los conductos radiculares preparados por PDL y HEDM (p>0,05). Ambos sistemas promovieron un mayor porcentaje de detritos en el tercio apical en comparación con el tercio medio (p0,05). PDL y HEDM tenían una capacidad de preparación del conducto radicular similar. Las imágenes de micro-CT que utilizan diferentes tamaños de vóxel no influyeron en los resultados de la evaluación del volumen y los desechos. Sin embargo, las imágenes de 5µm mostraron una mayor precisión al evaluar el porcentaje de superficies no instrumentadas.

RESUMO

Purpose: This study evaluated anatomical variations in the root canals of the lower premolars and molars in a Brazilian sub-population using cone-beam computed tomography (CBCT). Materials and Methods: In total, 121 CBCT images of patients were selected from a database. All images contained lower first and second premolars and molars on both sides of the arch, fully developed roots, and no treatment, resorption, or calcifications. In each image, the root canals of the lower premolars and molars were evaluated according to the Vertucci classification in On-Demand 3D software in the multiplanar reconstruction with dynamic navigation. Twenty-five percent of the images were re-assessed to analyze intraobserver confidence with the kappa test. Data were statistically evaluated with linear regression to evaluate the correlations of anatomic variations with age and sex, and the Wilcoxon test to analyze the laterality of variations, with a significance level of 5%. Results: The intraobserver agreement (0.94) was excellent. In general, the root canals of lower premolars and molars showed a higher prevalence of type I than other Vertucci classification types, followed by type V in premolars and type II in molars. When the molar roots were evaluated separately, type II was more frequent in mesial roots and type I in distal roots. Although age showed no correlations with the results, sex and laterality showed correlations with tooth 45 and the lower second premolars, respectively. Conclusion: The lower premolars and molars of a Brazilian sub-population showed a wide range of root canal anatomic variations.

RESUMO

ABSTRACT Objective: To evaluate the reliability and the accuracy of Tooth Coronal Index (TCI) and Pulp/Tooth Ratio (PTR) methods in dental age estimation using digital panoramic radiography. Material and Methods: In this cross-sectional study, 237 dental panoramic images were collected. The two methods (TCI and PTR) were applied to all left mandibular first and second molars based on inclusion and exclusion criteria. In order to analyze the acquired data, statistical methods were used. The estimated ages derived by exclusive formula were compared to the chronological age, and the error ranges for each indicator were measured to determine their accuracy. Results: There were negative correlations between PTR in the first molar (r=-0.89) and in the second molar (r=-0.788), as well as TCI in the first molar (r=-0.587) and in the second molar (r=-.242). In this study, we found that the Pulp/Tooth Ratio (PTR) accuracy rate for mandibular first and second molar teeth was 79.21% and 62.09 %, respectively, although the Tooth Coronal Index (TCI) value for these teeth was 34.45% and 5.85%. Conclusion: Pulp/Tooth Ratio and Tooth Coronal Index are potential age estimation indices. Although PTR was the more accurate one in our study. The results also demonstrated that indices related to the first molar tooth could be used to estimate age with greater accuracy and validity.

Assuntos

RESUMO

ABSTRACT Objective: To verify, through clinical and radiographic evaluations, the in vivo response of the dentin-pulpal complex of human primary teeth after pulpotomy with MTA and Biodentine™ in a follow-up period of 3, 6, and 12 months. Material and Methods: Thirty teeth were divided into MTA pulpotomy (n = 15) and Biodentine™ pulpotomy (n = 15) from children between 5 and 9 years of age, a randomized clinical trial with simple random sampling. The materials were inserted into the cavity after opening and removing the coronary pulp tissue. The cavity base consisted of glass ionomer cement and light-cured composite resin restoration. Clinical and radiographic analyses were performed after 3, 6, and 12 months. Statistical analysis by Fisher's exact test for dichotomous data at a 5% significance level was utilized. Results: Both materials caused color change after 12 months. However, MTA showed a higher percentage than Biodentine™ (p<0.0001). Pain was detected only with Biodentine™ at six months and mobility at 12 months (p=0.0013). Radiographically, after 12 months, periapical lesions, interradicular lesions, and internal resorption were evidenced in 13% of the cases for Biodentine™-treated teeth (p<0.0013). MTA induced pulp calcification in 13% of cases, unlike Biodentine™ (p<0.0013). Conclusion: BiodentineTM and MTA are suitable for clinical use in pulpotomy treatment, yet both materials lead to tooth discoloration.

Assuntos

RESUMO

Aim: The purpose of this study was to evaluate the efficacy to determine the root canal length, in vitro,of both the electronic apex locator (M2) and the autostop (AS - M3) functions of the Endus Duo Gnatus endodontic motor (Gnatus, São Paulo, SP, Brazil). Methods: Thirty extracted human single-rooted premolars had their root canal lengths (TLs) up to the apical foramen determined using the Endus Duo Gnatus in two ways: (1) In the stainless steel (SS) control group, the measurement was obtained using a stainless steel hand instrument with the electronic locator mode (M2 function) connected to a stainless-steel hand instrument (K-file #15). In the NiTi rotary instrument (NiTi RI) intervention group, the measurement was obtained during the instrumentation (M3 function) of the root canals with a nickel-titanium rotary instrument (Hyflex CM: Coltene Whaledent, Cuyahoga Falls, OH, USA), size 25/.06. The NiTi manually used instrument (NiTi MUI) Intervention group performed the measurement in locator mode using a Hyflex instrument, placed to true length manually. Statistical analysis was performed using ANOVA followed by the Tukey post-hoc test with a significance level of p < 0.05. Results: The true mean length and standard deviation (SD) of the standardized root canals were 18.40 ± 2.14mm, while the mean lengths and standard deviations (SD) were 18.29 ± 1.89mm, 18.22 ± 1.85mm, and 17.24 ± 2.09mm for the SS, NiTi RI, and NiTi MUI groups, respectively. However, data from the NiTi MUI Intervention group indicated shorter root canal lengths when compared to the SS control group and the NiTi RI Intervention group values, and were significantly shorter than the true canal length (p < 0.001). Conclusions:The use of the motor in NiTi RI Intervention group showed acceptable results. However, the NiTi MUI Intervention group resulted in unacceptable short measurements.

Objetivo: O objetivo deste estudo foi avaliar a eficácia na determinação do comprimento do canal radicular, in vitro, das funções localizador eletrônico foraminal (M2) e auto-parada durante a instrumentação (M3) do motor endodôntico Endus Duo Gnatus ( Gnatus, São Paulo, SP, Brasil). Métodos: Trinta pré-molares humanos uniradiculares extraídos tiveram seus comprimentos de canais radiculares (CRTs) até o forame apical determinados usando o Endus Duo Gnatus de duas maneiras: (1) No grupo controle de aço inoxidável (SS), a medida foi obtida usando um instrumento manual de aço inoxidável com modo de localização eletrônica foraminal (função M2) conectado a um instrumento manual de aço inoxidável (lima tipo K #15). No grupo intervenção instrumento rotatório NiTi (NiTi RI), a medida foi obtida durante a instrumentação (função M3) dos canais radiculares com instrumento rotatório de níquel-titânio (Hyflex CM: Coltene Whaledent, Cuyahoga Falls, OH, EUA), tamanho 25/.06. O grupo de intervenção NiTi instrumento usado manualmente (NiTi MUI) realizou a medição no modo localizador foraminal usando um instrumento Hyflex, colocado manualmente no comprimento real do dente. A análise estatística foi realizada por meio de ANOVA seguida do teste post-hoc de Tukey com nível de significância de p < 0,05. Resultados: Os comprimentos reais médios dos dentes e desvios-padrão (DP) dos canais radiculares padronizados foram 18,40 ± 2,14 mm, enquanto os comprimentos médios e desvios- padrão (DP) foram 18,29 ± 1,89 mm, 18,22 ± 1,85 mm e 17,24 ± 2,09 mm para os grupos SS, NiTi RI e NiTi MUI, respectivamente. No entanto, os dados do grupo de intervenção NiTi MUI indicaram comprimentos de canais radiculares mais curtos quando comparados aos valores do grupo controle SS e do grupo de intervenção NiTi RI, e foram significativamente mais curtos que o comprimento real do canal (p < 0,001). Conclusões: A utilização do motor no grupo Intervenção NiTi RI apresentou resultados aceitáveis. No entanto, o grupo de intervenção NiTi MUI resultou em medições curtas inaceitáveis.

Assuntos

RESUMO

Abstract The aim of this study was to evaluate root canal preparation with nickel titanium rotary instruments and complementary preparation with ultrasonic tip in curved canals of mandibular molars with isthmus. Twenty-eight mesial roots of mandibular molars with curvature between 20° and 40° and presence of isthmus throughout the entire extension of the root canals were prepared using ProDesign Logic CM (PDL) up to size 40.05, or HyFlex EDM (HFEDM) up to size 40.04. Complementary preparation was performed in the isthmus region using the ultrasonic insert E18D (Helse, Istmo Diamantada). The root canals were scanned using micro-CT (SkyScan 1176) at 9 µm voxel size before and after each preparation step. Transportation, percentage of increase in volume, debris and uninstrumented surface (UNS) were evaluated. Mann Whitney, Wilcoxon, paired and non-paired t-tests were used for statistical analysis (α = 0.05). The canals prepared with PDL and HFEDM obtained similar results for all the variables assessed before using E18D (p > 0.05). E18D significantly decreased the percentage of debris and UNS values in both Groups (p < 0.05). The complementary preparations with E18D caused a smaller quantity of debris in the isthmus of the canals previously prepared with PDL in comparison with HFEDM (p < 0.05). PDL and HFEDM provided similar root canal preparation. PDL promoted a smaller quantity of Debris in the isthmus than HFEDM after using E18D. E18D significantly improved cleaning, and reduced Debris and UNS.

RESUMO

Background: This study evaluated the effects of using different root canal sealers and protocols for cleaning intraradicular dentin on the bond strength of a composite resin used to reinforce weakened roots. Material and Methods: Sixty-four roots of extracted human maxillary canines were weakened, prepared and filled with two different endodontic sealers (Endofill and AH Plus). In half of the sample, set aside for each respective sealer, excess filling material was cleaned. In the other half, the weakened areas were not cleaned, and the excess of sealer was spread on the intraradicular dentin. Intentionally worn areas inside each root were restored with a microhybrid light-cure composite resin (Z100) to reinforce them, with and without acid etching. Prefabricated metal posts were fixed with a dual resin cement (RelyX ARC), and the specimens were submitted to a pull-out test. Statistical analysis was performed by means of Shapiro-Wilk, analysis of variance (one-way ANOVA) and Tukey-Kramer tests (p<0.05). Results: The groups filled with Endofill (GI, GII, GIII, GIV) had the lowest bond strength values, which were similar among each other (p>0.05).The greatest bond strength values were observed in roots filled with AH Plus (GV, GVI, GVII, GVIII), mainly without cleaning of the weakened areas, and followed by acid etching (GVII), and also with cleaning of the weakened areas, however, with no acid etching (GVI) (p<0.05). Conclusion: The greatest bond strength values were observed in roots filled with AH Plus; (1) without cleaning of the weakened areas and with acid etching, and; (2) with cleaning of the weakened areas, but without acid etching.

Antecedentes: este estudio evaluó los efectos del uso de diferentes selladores de conductos radiculares y protocolos para limpiar la dentina intrarradicular sobre la fuerza de unión de una resina compuesta utilizada para reforzar las raíces debilitadas. Material y Métodos: Sesenta y cuatro raíces de caninos maxilares humanos extraídos fueron debilitadas, preparadas y rellenadas con dos selladores endodónticos diferentes (Endofill y AH Plus). En la mitad de la muestra, reservada para cada sellador respectivo, se limpió el exceso de material de relleno. En la otra mitad, las áreas debilitadas no se limpiaron y el exceso de sellador se esparció sobre la dentina intrarradicular. Las áreas desgastadas intencionalmente dentro de cada raíz se restauraron con una resina compuesta fotopolimerizable microhíbrida (Z100) para reforzarlas, con y sin grabado ácido. Los postes metálicos prefabricados se fijaron con un cemento de resina dual (RelyX ARC) y los especímenes se sometieron a una prueba de extracción. El análisis estadístico se realizó mediante Shapiro-Wilk, análisis de varianza (ANOVA de una vía) y pruebas de Tukey-Kramer (p<0,05). Resultados: Los grupos rellenos con Endofill (GI, GII, GIII, GIV) presentaron los valores más bajos de fuerza de unión, los cuales fueron similares entre sí (p>0,05). Los mayores valores de fuerza de unión se observaron en raíces rellenas con AH Plus (GV, GVI, GVII, GVIII), principalmente sin limpieza de las áreas debilitadas, seguido de grabado ácido (GVII), y también con limpieza de las áreas debilitadas aunque sin grabado ácido (GVI) (p<0.05). Conclusión: Los mayores valores de fuerza de unión se observaron en las raíces rellenas con AH Plus; (1) sin limpieza de las áreas debilitadas y con grabado ácido, y; (2) con limpieza de las áreas debilitadas, pero sin grabado ácido.

Assuntos

RESUMO

OBJECTIVES: The aim of this study was to compare the effect of three different access cavities on the tissue removal, deflection, fracture resistance, and stress distribution of extracted maxillary central incisors. MATERIALS AND METHODS: Forty human maxillary central incisors were randomly assigned in four experimental group (n = 10) including conservative access cavity "CAC," traditional access cavity "TAC," invasive access cavity "IAC," and without access cavity (control group). Cone-beam computed tomography "CBCT" scans were used to evaluate the tissue removal during the different access cavities. All specimens were restored with composite resin (Admira Fusion, Voco, Cuxhaven, Germany) and embedded in acrylic resin blocks after simulating the periodontal ligament using red wax, then the specimens were submitted to the deflection test applying a load of 250 N and to the load-to-fracture test after artificial aging in a mechanical cycling machine (150 N, 5 × 106 cycles, 10 Hz). Lastly, stress distribution was assessed by three-dimensional finite element analysis (3D-FEA), simulating the specimens restoration by two types of composite resins of low and high elastic modulus (8 and 18 GPa respectively) after the access cavities. The data were submitted to Shapiro-Wilk and KS normality tests. Then, they were analyzed by one-way ANOVA and Tukey tests with a significance level (α ≤ 0.05). RESULTS: CBCT scans showed a significant difference of worn tissues in CAC and TAC when compared to the IAC (P < 0.0001). In deflection test, CAC showed lower deformation values than the TAC and IAC. Load-to-fracture test presented no significant difference among the three experimental groups (P = 0.6901). 3D-FEA showed that the more conservative the access cavity, the higher the stress magnitude. CONCLUSIONS: CAC promote less worn tissue; however, this does not improve the stress distribution or fracture resistance of endodontically treated maxillary incisors. CLINICAL RELEVANCE: Clinicians should reconsider the pros and cons of the conservative access cavity.

Assuntos

RESUMO

Este trabalho teve como objetivo apresentar um relato de caso clínico de uma restauração do tipo coroa endocrown cerâmica em um dente molar tratado endodonticamente. Paciente com 45 anos de idade, sexo feminino, procurou a clínica do Centro Universitário da Serra Gaúcha (FSG) relatando a necessidade de reabilitação protética no primeiro molar inferior do lado esquerdo. Com base no exame radiográfico e exame clínico foi constatado um primeiro molar inferior do lado esquerdo com tratamento endodôntico satisfatório, mas uma extensa destruição coronária. Após a aprovação da paciente e indicações para a utilização da técnica, optou-se pela confecção de uma coroa endocrown em cerâmica reforçada por dissilicato de lítio. Foi realizado o preparo do remanescente dentário, envolvendo a câmara pulpar, com ângulos arredondados e expulsivos e, após a moldagem do mesmo com silicone de adição, utilizando a técnica simultânea e duplo fio. O provisório foi realizado com resina quimicamente ativada na cor 62 e, na sessão seguinte a coroa endocrown foi ajustada e polida. Após receber o protocolo de condicionamento adequado da peça, a mesma foi cimentada com cimento autopolimerizável Multilink N. Pode-se concluir que a alternativa restauradora Endocrown é um tratamento conservador e favorável para dentes com extensa destruição coronária, permitindo adequada estética e função(AU)

This study aimed to present a clinical case report of an endocrown ceramic crown restoration in na endodontically treated molar tooth. A 45-year-old female patient sought the clinic at the Centro Universitário da Serra Gaúcha (FSG), reporting the need for prosthetic rehabilitation on the lower left first molar. Based on the radiographic and clinical examination, the first molar presented satisfactory endodontic treatment, but extensive coronary destruction. After the approval of the patient and indications for the use of the technique, it was decided to make an endocrown with reinforced ceramic by lithium disilicate. The remaining tooth was prepared, involving the pulp chamber, with rounded and expulsive angles and, after the impression with silicone using the simultaneous and double wire technique was taken. The provisional was made with chemically activated resin in color 62 and, in the following session, the endocrown crown was adjusted and polished. After receiving the proper conditioning protocol, it was lutted with Multilink N self-curing cement. It can be concluded that the Endocrown restorative alternative is a conservative and favorable treatment for teeth with extensive coronary destruction, allowing adequate aesthetics and function(AU)

Assuntos

RESUMO

Introduction: Successful endodontic treatment requires an effective coronal sealing to prevent the penetration of saliva and microorganisms into the root canal system. We aimed to investigate the sealing capacity of Maxxion R, Intermediate Restorative Material (IRM), Mineral Trioxide Aggregate-like material (Biodentine), White Cimpat, Flow Resin and Z250 Resin against Enterococcus (E.) faecalis infiltrates, when used as coronal sealants after endodontic treatment. Materials and Methods: Sixty-six roots of adult lower premolars were randomly divided into 6 experimental groups with 10 roots each (n=10), and two control groups (positive and negative) with three roots each. The root canals were instrumented to ProTaper F3 file, irrigated with 2.5% NaOCl and 17% EDTA, and filled using Tagger's Hybrid technique with AH-Plus cement. After removing 2 mm of the coronal third filling with a Gates Glidden #6 drill, the cervical portion of each of the sixty roots was sealed with a 2 mm-thick plug, plus the respective material being tested in this study. All roots were fitted to silicone devices (Eppendorf) with cut extremities and sterilized with ethylene oxide; experimental procedures were performed in a laminar flow chamber for aseptic chain maintenance. All specimens were inoculated with E. faecalis, and the culture medium was renewed every 3 days for 60 days. Medium turbidity was evaluated daily. The obtained data were subsequently submitted to analysis of variance (ANOVA-R) complemented by Student's t-test at a significance level of 5%. Analyzes of variance were calculated using the SAS system GLIMMIX procedure. Results: Biodentine (56.90), Z250 Resin (54.90) and White Cimpat (53.30) resisted contamination for a longer time compared to Maxxion R (51.30), Flow Resin (50.70), and IRM (48.70) over a period of 60 days. Conclusion: Biodentine, Resin Z 250 and White Cimpat presented the lowest infiltration averages when compared to the other tested materials.

RESUMO

Abstract This study evaluate the maxillary anterior teeth anatomy by micro-computed tomography (μCT), about relevant characteristic for endodontic treatment planning. Fifty maxillary central incisors (MCI), lateral incisors (MLI) and maxillary canines (MC) were scanned using a μCT device. Two and three-dimensional parameters at 1 to 5mm distance to the apical foramen, external anatomic characteristics of the teeth and qualitative analysis of the internal anatomy was performed. The roundness and form factor values revealed a circular canal in the apical third in the MCI and MC, whereas MLI showed flattening in the apical third. The linear regression test indicated a progressive increase in the major/minor diameters in the five mm assessed (p < 0.001). The 3D analysis revealed the greatest volume and surface area in MC. The SMI showed a cylindrical geometry of root canals. All teeth presented Vertucci's type I root canal configuration. A mild curvature was prevalent in the MCI (45%) and a moderate one in the MLI (50%) and MC (50%). Palatal shoulder volume was smaller in the MLI (11.46 ± 3.09) than in the MCI (14.15 ± 3.85) and MC (13.95 ± 2.55). The most common exit of main apical foramen was in a central (22%), distolingual (30%) and mesiobuccal position (28%) for MCI, MLI and MC, respectively. Radicular grooves were observed in 2% of MCI and 4% of MLI. Two and three-dimensional data obtained by μCT allowed to observe morphological characteristics of internal/external anatomy of the maxillary anterior teeth. These characteristics may affect the endodontic treatment planning.

RESUMO

Abstract: This study assessed the ability of XP-endo Finisher R (FKG, La Chaux-de-Fonds, Switzerland) to remove filling remnants from curved mesiobuccal canals of maxillary molars, using the passive ultrasonic irrigation (PUI) technique as a comparison. Twenty-four curved main mesiobuccal canals (MB1) of maxillary molars were instrumented with Wave One (#25/07) and filled with gutta-percha points and AH Plus Sealer. Samples were then re-treated with a standardized protocol with Wave One (#35/06) as the master apical file. Micro-CT scans measured baseline volume of remaining filling material (in mm3). Samples were divided into two groups (n = 12) according to the supplementary cleaning approach: (PUI) or XP-endo Finisher R. Statistics compared baseline and final volume of filling material (within-group); and the percentage of filling material reduction (between-group). Mean baseline volumes, final volumes, and percentages of reduction (%) of filling material for XP-endo Finisher R and PUI were respectively: 0.060 mm3, 0.042 mm3, and 31.28%; and 0.064 mm3, 0.054 mm3, and 16.57%. Both tested protocols reduced the amount of filling material (p < 0.05). XP-endo Finisher R had higher percentage of reduction as compared to PUI (p < 0.05). XP-endo Finisher R and PUI used as supplementary cleaning protocols during re-treatment improved the removal of root filling material in curved canals; but XP-endo Finisher R was approximately twice more efficient. The complete filling material removal during re-treatment procedures is still a challenge. Supplementary cleaning protocols may help to remove the remaining material after the complete mechanical preparation of curved canals. XP-endo Finisher R was approximately twice more efficient than PUI.

RESUMO

Abstract This study aimed to evaluate the root canal real length (RL) changes due to the mechanical instrumentation use with different flaring magnitudes. After access cavity, 60 mesial root canals of mandibular molars were randomly separated in three groups: Hyflex EDM (HF; #25/.12, #10/.05 e #25/~), Reciproc Blue (RB; R25), and MTwo (M2; #10/.04, #15/.05, #20/.06 e #25/.06). The RL was defined as the apical limit, and 2.5% sodium hypochlorite irrigating solution was chosen. After the access cavity (RL 1), cervical flaring (RL 2), and complete chemical-mechanical preparation (RL 3), the RL was evaluated. The RL was evaluated by a blind examiner with the aid of a microscope (16x) placing the endodontic file stop at the coronary reference. When comparing length measurements, the RL was shorter before instrumentation than that after instrumentation. A reduction of 0.65 mm (HF), 0.61 mm (RB), and 0.48 mm (M2) was observed. However, among groups, no statistical differences were found (p > 0.05). Under the conditions tested, it can be inferred that all mechanical systems provoked RL variations, which emphasizes the need for constant verification of the odontometry, mainly before root canal obturation.

RESUMO

Objetivo: O presente trabalho tem como objetivo avaliar o conhecimento dos odontopediatras e suas percepções, conhecendo as dificuldades que estes encontram frente ao desafio da reabilitação de dentes decíduos. Métodos: A pesquisa foi realizada por meio da aplicação de questionários on-line e a análise estatística foi descritiva e comparativa, com tabelas de frequência para as variáveis quantitativas. O teste não paramétrico de Qui-quadrado foi utilizado para estimar a associação entre as diferentes categorias dos dados e em todo o estudo, estipulou-se o nível de significância em 5%. Resultados: Os resultados da pesquisa mostraram que a maioria dos entrevistados conhecem as coroas pré-fabricadas de aço, porém sua aplicação em atendimentos de crianças com extensas destruições coronárias limita-se a 34,1% destes profissionais, sendo que a baixa utilização se deve à dificuldade de aquisição do material e falta de habilidade técnica. Já com relação às coroas pré-fabricadas de zircônia, 82,4% das odontopediatras as conhecem, mas a grande maioria não as utiliza devido à dificuldade de aquisição, falta de habilidade técnica e o seu alto custo. Não foi encontrada associação entre a dificuldade de planejamento dos casos e a consideração estética e o âmbito de trabalho do entrevistado, bem como o fato de conhecer as coroas pré-fabricadas e utilizá-las. Conclusão: Conclui-se que os materiais reabilitadores, como coroas pré-fabricadas de aço e de zircônia, são de certa forma bem conhecidos pelos odontopediatras, mas sua utilização em reabilitação de dentes decíduos ainda é limitada.

Aim: The present study aims to evaluate the knowledge of pediatric dentists and their perceptions, knowing the difficulties they face in the challenge to rehabilitate deciduous teeth. Methods: This study was carried out through the application of online questionnaires. The statistical analysis was descriptive and comparative, with frequency tables for the quantitative variables. The non-parametric chi-square test was used to estimate the association between the different categories of data, and the significance level was set at 5%. Results:The survey results showed that most respondents know about prefabricated steel crowns, but their application in the care of children with extensive coronary destruction is limited to 34.1% of these professionals. The low use is due to the difficulty of acquiring the material and the lack of technical skills. It was found that 82.4% of the pediatric dentists have knowledge about prefabricated zirconia crowns, but the vast majority do not use them due to the difficulty of acquisition, their lack of technical skills, and the product's high cost. No association was found between the difficulty of planning the cases and the esthetic consideration and sphere of work of the interviewee, nor regarding the fact of their having knowledge about the prefabricated crowns and using them. Conclusion: It can therefore be concluded that rehabilitation materials, such as prefabricated steel and zirconia crowns, are well-known by pediatric dentists, but their use in the rehabilitation of deciduous teeth is still limited.

Assuntos

RESUMO

Abstract Objective: To evaluate root canal configuration and morphology of premolar teeth among Saudi subpopulations using cone beam computed tomography (CBCT). Material and Methods: In this retrospective cross-sectional study, CBCT images of 314 patients comprising 346 maxillary and 412 mandibular first premolar (FPM) teeth, 298 maxillary and 387 mandibular second premolar (SPM) teeth were analyzed to evaluate the number of roots, root canal morphology, and configuration based on the Vertucci's classification. The average intra-class correlation coefficient value was 0.931. Results: In the maxillary first premolar, 52.6% were two separate rooted and single rooted teeth, with one canal in 81.2% of the maxillary second premolar. Among the mandibular FPM, 96.6% of the teeth had one root and canal, and 97.9% of mandibular SPM had one root and canal. Type 1 canal configuration was seen as most common in all premolars. The number of roots in mandibular premolars did not reveal the difference among gender. Conclusion: Wide variations in root canal morphology and canal configuration system exists among maxillary and mandibular premolar teeth (AU).

Assuntos