Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 49
Filtrar
1.
BMC Oral Health ; 24(1): 709, 2024 Jun 19.
Artigo em Inglês | MEDLINE | ID: mdl-38898433

RESUMO

BACKGROUND: Edentulism remains a major disability worldwide, especially among the elderly population, although the prevalence of complete edentulism has declined over the last decades. In Uganda, the prevalence of edentulism in people aged 20 years and above is 1.8%. The therapy for edentulous patients can be realized through the use of conventional removable complete dentures, implant-supported prostheses, and computer-aided design and computer-aided manufacturing (CADCAM), however, the provision of removable complete dentures continues to be the predominant rehabilitation for edentulous patients. However, no published study has explored the lived experiences with removable complete dentures among the Ugandan population. The aim of the present study was to explore patients' lived experiences on the usage of removable complete dentures among Ugandan edentulous patients attending Makerere University Dental Hospital. METHODS: This was a qualitative study approach using purposive sampling. Fifteen (15) respondents were selected across social demographics. Interviews were recorded and transcribed and themes were generated to draw a deeper meaning to the usage of removable complete dentures. A qualitative statistical package, Atlas Ti software was used to generate themes from the interviews followed by an interpretation of the generated data and the results were presented as text and in a table. RESULTS: The reported key positive experiences due to removable complete denture rehabilitation were the improvement in speech, eating ability, regaining good facial appearance, better oral hygiene management, self-esteem and confidence to smile in public, and a feeling of completeness. However, respondents complained of pain and discomfort due to the looseness of dentures, inability to eat certain foods, and regular cleaning of dentures. The respondents did not go through proper informed consent processes before getting removable complete dentures. CONCLUSION: The study found that patients were satisfied with their removable complete dentures rehabilitation due to the positive experiences registered, such as the ability to eat and talk well, and restoration of self-esteem, all of which improved their quality of life. However, they experience pain and discomfort due to the looseness of dentures.


Assuntos
Prótese Total , Boca Edêntula , Humanos , Uganda , Boca Edêntula/psicologia , Boca Edêntula/reabilitação , Feminino , Masculino , Prótese Total/psicologia , Pessoa de Meia-Idade , Idoso , Pesquisa Qualitativa , Adulto , Qualidade de Vida
2.
Community Dent Oral Epidemiol ; 52(4): 572-580, 2024 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-38509032

RESUMO

OBJECTIVE: This study aimed to explore the cross-sectional and prospective associations between self-reported functionality of complete dentures (FCD), satisfaction with complete dentures (SCD) and the ability to chew hard food (ACHF) on the one hand and the frailty index (FI) on the other hand among edentulous community-dwelling older Japanese people. METHODS: The study examined 770 edentulous participants of the Nihon University Japanese Longitudinal Study of Aging. The self-reported FCD, SCD and ability to chew six groups of food (from hardest to softest) with complete dentures were the independent variables at the baseline. The FI was computed including 40 deficits as the dependent variable at the baseline and 4 years later. Cross-sectional and prospective generalized linear regression models were fitted controlling for age, gender, marital status, education, working status and area of residence. RESULTS: The use of non-functional complete dentures and dissatisfaction with complete dentures were both associated with a higher FI cross-sectionally (3.9% [95% CI 2.2-5.6] and 3.2% [95% CI 1.5-4.9], respectively) and prospectively (3.9% [95% CI 2.0-6.0] and 3.3% [95% CI 1.3-5.3], respectively). Regarding the ability to chew, a higher FI at baseline was observed among those able to chew food of Group 2 (1.9%, [95% CI 0.1-3.7]) and Groups 4-6 (1.9%, [95% CI 0.1-3.7]), and a progressive increment in the FI, as the participants reported being able to chew softer groups of food at the follow-up (Group 2: 2.2% [95% CI 0.05-4.3]; Group 3: 3.6% [95% CI 1.2-6.0]; and Groups 4-6: 3.4 [95% CI 0.7-6.1]). CONCLUSION: Self-reported use of non-functional complete dentures, dissatisfaction with dentures and a reduced ACHF with complete dentures were associated with a higher FI both cross-sectionally and prospectively.


Assuntos
Prótese Total , Boca Edêntula , Humanos , Masculino , Feminino , Idoso , Estudos Prospectivos , Japão/epidemiologia , Estudos Transversais , Prótese Total/estatística & dados numéricos , Boca Edêntula/epidemiologia , Fragilidade/epidemiologia , Mastigação/fisiologia , Idoso de 80 Anos ou mais , Satisfação do Paciente , Autorrelato , Estudos Longitudinais , População do Leste Asiático
3.
J. appl. oral sci ; J. appl. oral sci;32: e20230326, 2024. tab, graf
Artigo em Inglês | LILACS-Express | LILACS | ID: biblio-1558246

RESUMO

Abstract Studies evaluating the roughness, wettability and microbial adhesion of 3D-printed resins for complete denture bases and teeth are scarce. Objective This study evaluated the surface roughness, wettability and adhesion of multispecies biofilms (Candida albicans, Staphylococcus aureus and Streptococcus mutans) on 3D-printed resins for complete denture bases and teeth compared to conventional resins (heat-polymerized acrylic resin; artificial pre-fabricated teeth). Methodology Circular specimens (n=39; 6.0 mm Ø × 2.0 mm) of each group were subjected to roughness (n=30), wettability (n=30) and biofilm adhesion (n=9) tests. Three roughness measurements were taken by laser confocal microscopy and a mean value was calculated. Wettability was evaluated by the contact angle of sessile drop method, considering the mean of the three evaluations per specimen. In parallel, microorganism adhesion to resin surfaces was evaluated using a multispecies biofilm model. Microbial load was evaluated by determining the number of Colony Forming Units (CFU/mL) and by scanning electron microscopy (SEM). Data were subjected to the Wald test in a generalized linear model with multiple comparisons and Bonferroni adjustment, as well as two-way ANOVA (α=5%). Results The roughness of the conventional base resin (0.01±0.04) was lower than that of the conventional tooth (0.14±0.04) (p=0.023) and 3D-printed base (0.18±0.08) (p<0.001). For wettability, conventional resin (84.20±5.57) showed a higher contact angle than the 3D-printed resin (60.58±6.18) (p<0.001). Higher microbial loads of S. mutans (p=0.023) and S. aureus (p=0.010) were observed on the surface of the conventional resin (S. mutans: 5.48±1.55; S. aureus: 7.01±0.57) compared to the 3D-printed resin (S. mutans: 4.11±1.96; S. aureus: 6.42±0.78). The adhesion of C. albicans was not affected by surface characteristics. The conventional base resin showed less roughness than the conventional dental resin and the printed base resin. Conclusion The 3D-printed resins for base and tooth showed less hydrophobicity and less adhesion of S. mutans and S. aureus than conventional resins.

4.
J Prosthodont ; 32(S1): 38-44, 2023 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-35661475

RESUMO

PURPOSE: To investigate surface characteristics (roughness and contact angle), anti-biofilm formation, and mechanical properties (mini-flexural strength) of computer-aided design and computer-aided manufacturing (CAD-CAM) polymethylmethacrylate (PMMA) polymer, and three-dimensional (3D) printed resin for denture base fabrication compared with conventional heat polymerized denture base resins. MATERIALS AND METHODS: A total of 60 discs and 40 rectangular specimens were fabricated from one CAD-CAM (AvaDent), one 3D printed (Cosmos Denture), and two conventional heat polymerized (Lucitone 199 and VipiWave) materials for denture base fabrication. Roughness was determined by Ra value; the contact angle was measured by the sessile drop method. The biofilm formation inhibition behavior was analyzed through Candida albicans adhesion, while mini-flexural strength test was done using a three-point bending test. The data were analyzed using descriptive and analytical statistics (α = 0.05). RESULTS: The CAD-CAM PMMA group showed the lowest C. albicans adhesion (log CFU/mL: 3.74 ± 0.57) and highest mini-flexural strength mean (114.96 ± 16.23 MPa). 3D printed specimens presented the highest surface roughness (Ra: 0.317 ± 0.151 µm) and lowest mini-flexural strength values (57.23 ± 9.07 MPa). However, there was no statistical difference between CAD-CAM PMMA and conventional groups for roughness, contact angle, and mini-flexural strength. CONCLUSIONS: CAD-CAM milled materials present surface and mechanical properties similar to conventional resins and show improved behavior in preventing C. albicans adhesion. Nevertheless, 3D printed resins present decreased mini-flexural strength.


Assuntos
Bases de Dentadura , Polimetil Metacrilato , Teste de Materiais , Propriedades de Superfície , Desenho Assistido por Computador , Impressão Tridimensional
5.
J. appl. oral sci ; J. appl. oral sci;31: e20230192, 2023. tab, graf
Artigo em Inglês | LILACS-Express | LILACS | ID: biblio-1528885

RESUMO

Abstract Objective To assess the association between risk factors for developing denture stomatitis (DS) and oral health-related quality of life (OHRQoL) in complete denture wearers. Methodology Participants of both sexes, wearing complete dentures, were classified using the modified Newton classification for the absence or the severity of DS and allocated to groups Normal or zero, IA, IB, II, and III. Lifestyle, oral and denture history, and medication use were assessed using specific questionnaires; clinical parameters such as anatomical characteristics of support were evaluated with the Kapur classification; salivary flow (SF) was calculated by the volume of unstimulated saliva per minute; and microbial load was determined by counting colony forming units (CFU) of target microorganisms present in the biofilm collected from dentures and palate. OHIP-EDENT assessed the OHRQoL. Kendall's tau_b and Spearman tests were applied with a significance level of 5%. Results 184 patients (143 female and 41 male) aged 65.5 ± 6.8 years were evaluated. Positive correlations were found for sex (women; p=0.013, r=0.16), individuals who started to consume alcoholic beverages as a young adult (18-27 years) (p=0.008, r=0.22), CFU of Candida spp. (p<0.001, r=0.27 denture; p<0.001, r=0.31 palate); Candida albicans (p=0.004, r=0.22 denture; p=0.003, r=0.25 palate), and Candida glabrata (p=0.004, r=0.22 denture; p=0.001, r=0.27 palate). Moreover, negative correlations with DS were found for CFU of Staphylococcus spp. (p=0.004, r=-0.20 palate) and enterobacteria (p=0.002, r=-0.24 palate), as well as a negative correlation between SF (p=0.009, r=-0.193) and DS. The CFU of Staphylococcus spp. and enterobacteria on the palate significantly correlated with OHRQoL. Conclusion Being female, consuming alcoholic beverages as a young adult, CFU of Candida spp., Candida albicans, Candida glabrata, and salivary flow may be the most significant risk factors for DS. The microbial load of Staphylococcus spp. and enterobacteria seems to influence the quality of life for complete denture wearers.

6.
Rev. Odontol. Araçatuba (Impr.) ; 43(3): 54-60, set.-dez. 2022. ilus
Artigo em Inglês | LILACS, BBO - Odontologia | ID: biblio-1381314

RESUMO

The aim of this study is to report a clinical case of a patient with Cushing's syndrome, low self-esteem and need for oral rehabilitation. A 50-year-old female patient with hypercortisolism sought care at School of Dentistry of the Federal University of Minas Gerais. During anamnesis, the patient reported painful symptoms and mobility of the upper and lower teeth. On clinical examination, absence of many teeth were observed, periodontal disease and caries lesions. After discussion of the case, the planning involved the extraction of all teeth, and the preparation of Maxillary Immediate Complete Dentures (ICD's) and Immediate Mandibular Implant-retained Overdenture (IMIO). The treatment proposed allowed the restored aesthetics, phonetics and chewing(AU)


O objetivo desse estudo é relatar um caso clínico de uma paciente com síndrome de Cushing, baixa autoestima e necessidade de reabilitação oral. Paciente do sexo feminino, 50 anos de idade e com hipercortisolismo, procurou atendimento na Faculdade de Odontologia da Universidade Federal de Minas Gerais. Durante a anamnese, a paciente relatou sintomas dolorosos e mobilidade dos dentes superiores e inferiores. No exame clínico, foi observada a ausência de muitos dentes, doença periodontal e lesões cariosas. Após a discussão do caso, o planejamento envolveu a extração de todos os dentes, e o preparo de Prótese Total Imediata maxilar (PTI), e Overdenture Implantorretida Imediata mandibular. O tratamento proposto permitiu que restaurasse a estética, fonética e mastigação(AU)


Assuntos
Humanos , Feminino , Pessoa de Meia-Idade , Síndrome de Cushing , Prótese Total Imediata , Doenças Periodontais , Extração Dentária , Cárie Dentária , Prótese Total , Revestimento de Dentadura , Estética Dentária
7.
Natal; s.n; 21 out. 2022. 126 p. ilus, tab, graf.
Tese em Português | LILACS, BBO - Odontologia | ID: biblio-1532447

RESUMO

Recursos digitais, como a manufatura subtrativa (fresagem CAD-CAM) e a manufatura aditiva (impressão 3D) podem promover significativos avanços, reduzindo o tempo e o custo de produção de próteses totais (PTs). Assim, este estudo objetiva investigar as características superficiais (rugosidade e ângulo de contato), propriedades mecânicas (resistência mini-flexural) e a adesão de biofilme sobre polímeros de PMMA pré-polimerizado para fresagem CAD-CAM e sobre resinas para impressão 3D utilizados na fabricação de bases de PTs, bem como propor um fluxo de trabalho inovador para abreviar e simplificar as etapas de confecção de PTs. Para a análise in vitro, foram fabricados um total de 60 discos e 40 barras distribuídas igualmente em quatro grupos: fresagem CAD-CAM (GF), impressão 3D (GI) e PMMA convencional termopolimerizado por ciclo longo (GCL) ou por energia de micro-ondas (GCM). A rugosidade foi determinada pelo valor de Ra; o ângulo de contato foi medido pelo método da gota séssil; o teste de resistência à mini-flexão foi obtido por teste de flexão de três pontos, enquanto o comportamento frente à formação de biofilme foi analisado através da adesão de biofilme de C. albicans. Os dados foram analisados por meio de estatística descritiva e analítica (α = 0,05). Os resultados mostraram que o GI apresentou a maior rugosidade superficial (Ra: 0,317 ± 0,151µm) e os menores valores de resistência à miniflexão (57,23 ± 9,07MPa) e o GF apresentou a menor adesão de biofilme de C. albicans (log UFC/mL: 3,74 ± 0,57) e maior média de resistência à mini-flexão (114,96 ± 16,23 MPa). Não houve diferença estatística entre o GF e os grupos convencionais para rugosidade, ângulo de contato e resistência à mini-flexão. A patente de inovação desenvolvida estabeleceu um novo fluxo de trabalho para confecção de próteses totais através de um protocolo de três consultas em que foram feitas as moldagens anatômicas na 1ª sessão, juntamente com o registro do suporte labial, plano oclusal e linhas de referência para subsidiar a montagem dos dentes superiores. Uma prótese-teste foi confeccionada por meio de procedimentos convencionais ou CAD-CAM e avaliada na 2ª consulta, permitindo observar o resultado estético, executar a moldagem funcional e realizar o registro da relação maxilo-mandibular, fornecendo referências precisas para a confecção da prótese inferior. Com base nos resultados da fase in vitro deste estudo, os corpos-de-prova obtidos a partir de disco para fresagem CAD-CAM apresentaram resistência flexural e propriedades superficiais semelhantes às resinas convencionais e mostraram um comportamento inibidor da adesão de C. albicans, enquanto os espécimes produzidos por impressão 3D exibiram a menor resistência à flexão e a maior rugosidade da superfície. O dispositivo inovador apresentado para a execução das etapas clínicas relacionadas à fabricação de PTs mostrou-se efetivo para abreviar e simplificar as técnicas disponíveis, apresentando confiabilidade e previsibilidade para produção de PTs em número de sessões reduzido (AU).


Digital features like subtractive and additive manufacturing can promote breakthroughs by reducing the time and cost of making complete dentures (CDs). Thus, this study aims to investigate surface characteristics (roughness and contact angle), mechanical properties (mini-flexural strength), and biofilm adhesion on computer-aided design/computer-aided manufacturing (CAD-CAM) PMMA polymer, and threedimensional (3D) printed resin for denture´s base fabrication as well as to propose an innovative workflow. For in vitro analysis, a total of 60 discs and 40 rectangular specimens were fabricated from one CAD-CAM pre-polymerized PMMA disc (GF), one 3D-printed (GI), and two conventional heat-polymerized (GCL and GCM) materials for denture base fabrication. Roughness was determined by the Ra value; the contact angle was measured by the sessile drop method; the mini-flexural strength test was a three-point bending test while the biofilm formation inhibition behavior was analyzed through C. albicans adhesion. The data were analyzed using descriptive and analytical statistics (α = 0.05). Results showed that GI specimens presented the highest surface roughness (Ra: 0.317 ± 0.151 µm) and lowest mini-flexural strength values (57.23 ± 9.07 MPa) and the GF showed the lowest C. albicans adhesion (log CFU/mL: 3.74 ± 0.57) and highest mini-flexural strength mean (114.96 ± 16.23 MPa). There was no statistical difference between GF and conventional groups for roughness, contact angle, and mini-flexural strength. In turn, the presented novel workflow for complete dentures fabrication reached a three appointments protocol in which preliminary impressions were made in the 1st session, all together to maxillary registration of lip support, occlusal plane, and reference lines for teeth arrangement. A trial denture was manufactured and evaluated by the 2nd appointment through conventional or CAD-CAM procedures, allowing esthetics evaluation, final impression, and maxillomandibular relationship record and providing precise references for final dentures fabrication. Based on the findings of this in vitro study, GF presented surface and mechanical properties similar to conventional resins and show improved behavior preventing C. albicans adhesion, while GI specimens exhibited the lowest flexural strength, and highest surface roughness. The proposed device for CD´s fabrication clinical procedures reached feasibility and by simplifying available techniques, this protocol could achieve reliability and predictability to produce complete dentures with reduced working time (AU).


Assuntos
Resinas Sintéticas , Desenho Assistido por Computador/instrumentação , Prótese Total/tendências , Tecnologia Digital , Técnicas In Vitro/métodos , Placa Dentária/prevenção & controle , Fluxo de Trabalho , Testes Mecânicos/métodos
8.
Gerodontology ; 39(4): 401-407, 2022 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-34908185

RESUMO

OBJECTIVES: The purposes of the present study were as follows: (1) to conduct a randomised crossover clinical trial to evaluate masticatory performance in wearers of conventional complete dentures in both arcs with conventional balanced occlusion (CBO) and lingualised balanced occlusion (LBO), using almonds as natural test food chewed for (a) 30 chewing cycles, (b) 40 chewing cycles and (c) until the subject felt ready to swallow and (2) to perform a randomised crossover clinical trial of oral health self-perception through the Geriatric Oral Health Assessment Index (GOHAI) questionnaire. BACKGROUND: During rehabilitation with full dentures, achieving stability and retention is essential for masticatory performance. A factor that can act is the appropriate occlusal scheme to be used, although the literature is full of discussions as to the most suitable occlusal scheme to be used, being CBO and LBO the most used in complete dentures. MATERIALS AND METHODS: The clinical trial was conducted with 30 participants (14 males and 16 females; average age 65.8 years). A base of interchangeable posterior teeth in the lower dentures was used, thereby changing the occlusal schemes without needing to make another complete denture. The masticatory tests and GOHAI application were conducted in two sessions: first with each occlusal scheme, and second only after participants did not report discomfort with dentures. The analysis of variance for the mixed repeated-measures test (ANOVA) was used to verify the results (α = 0.05). RESULTS: The results showed no difference in masticatory performance according to the occlusal scheme (P = .519). The masticatory performance increased with the number of cycles (P < .001) tested, regardless of the type of occlusion scheme, and oral health self-perception was higher after the second masticatory evaluation session (P = .027). CONCLUSION: The masticatory performance was similar between the two occlusal schemes, increasing according to the number of chewing cycles. The adaptive period is relevant, regardless of the occlusion scheme, because the time factor was decisive for the improvements noted in the oral health self-perception of the participants (according to the GOHAI results).


Assuntos
Planejamento de Dentadura , Prótese Total , Idoso , Feminino , Humanos , Masculino , Oclusão Dentária , Oclusão Dentária Balanceada , Mastigação , Estudos Cross-Over
9.
Braz. dent. j ; Braz. dent. j;31(4): 399-403, July-Aug. 2020. tab
Artigo em Inglês | LILACS, BBO - Odontologia | ID: biblio-1132316

RESUMO

Abstract: This cross-sectional observational study with 24 patients evaluated differences in bite force (BF) and masticatory performance (MP) between conventional complete denture (CCD) and implant mandibular overdenture (IMO) users and the correlation between these variables. The BF test was performed bilaterally with an occlusal force device. During the MP test, patients were asked to chew Optocal particles for 40 cycles. The Shapiro Wilk test was employed to verify the normality of the data, the student t test to identify differences between groups, and Pearson's correlation to investigate interrelationships between variables. A multiple linear regression was subsequently performed via the stepwise method. P values ≤0.05 were considered statistically significant. Unlike IMO users, CCD users presented a significant difference (25.6%) in BF between the dominant and non-dominant chewing side (p=0.04). IMO users presented significantly higher BF (p=0.01) without presenting a dominant side (p=0.38), and also performed significantly better for the following MP parameters: MPX50 values decreased by 27.25% in IMO users (p=0.01), MPB decreased by 48.38% (p=0.01), and ME 5.6 decreased by 53.25% (p=0.02), while ME2.8 increased by 151.57% (p=0.01). The BF and MPX50 in the IMO wearers group were negatively correlated (-0.57; p=0.05); this correlation coefficient was the only parameter included in the multivariate regression model. IMO users have higher BF and better masticatory performance than CCD users, especially in terms of chewed particles size reduction. MP is correlated with a higher BF in IMO users through better particle trituration.


Resumo Este estudo observacional transversal com 24 participantes teve como objetivo avaliar as diferenças na força de mordida (FM) e na PM (performance mastigatória) entre usuários de prótese total convencional (PTC) e de overdenture mandibular (OM) e a correlação entre essas variáveis. O teste de FM foi realizado bilateralmente com um dispositivo de força oclusal. Durante o teste de PM, os pacientes foram solicitados a mastigar uma porção padronizada de Optocal por 40 ciclos mastigatórios. O teste de Shapiro Wilk foi empregado para verificar a normalidade dos dados, o teste T de Student para identificar diferenças entre os grupos e os coeficientes de correlação de Pearson para investigar inter-relações entre variáveis. Uma regressão linear múltipla foi realizada pelo método stepwise. Valores de p≤0,05 foram considerados estatisticamente significantes. Diferentemente dos usuários de OM, os usuários de PTC apresentaram uma diferença significativa (34%) na FM entre o lado dominante e o não dominante (p=0,04). Os usuários de OM apresentaram FM significativamente maior (p=0,01) sem apresentar um lado dominante (p=0,38) e obtiveram PM significativamente melhor nos seguintes parâmetros: os valores de PMX50 diminuíram 27,25% (p=0,01), PMB diminuiu em 48,38% (p=0,01), e EM 5.6 diminuiu 53,25% (p=0,02), enquanto EM2.8 aumentou 151,57% (p=0,01). A FM e PMX50 no grupo de usuários da IMO foram negativamente correlacionados (-0,57;p=0,05); esse coeficiente de correlação foi o único parâmetro incluído no modelo de regressão multivariada. Os usuários da OM possuem maior FM e melhor performance mastigatória do que os usuários de PTC, observados principalmente na redução do tamanho das partículas mastigadas. A PM está correlacionada com um maior FM nos usuários da OM através de uma melhor trituração de partículas.


Assuntos
Humanos , Força de Mordida , Revestimento de Dentadura , Estudos Transversais , Prótese Total , Mandíbula
10.
Trials ; 20(1): 661, 2019 Nov 29.
Artigo em Inglês | MEDLINE | ID: mdl-31783777

RESUMO

BACKGROUND: Denture-related stomatitis (DS) is chronic multifactorial inflammation, strongly related to the presence of the biofilm that is the complex structure formed by microorganisms held together by a mucus-like matrix of carbohydrate that adheres to different surfaces, including the denture surface. DS has recently been correlated with deleterious cardiovascular alterations. The potential effect of hygiene protocols in the control of DS and randomized clinical trials that address this oral condition with cardiovascular complications are important in clinical decision-making. MATERIAL/DESIGN: A clinical trial, randomized, double-blind, and with parallel groups, will be conducted in Brazil The sample will consist of 100 patients without teeth in both arches, users of at least maxillary complete dentures, and diagnosed with DS, who will be allocated to groups (n = 25 per group) according to the different hygiene protocols: (1) brushing of the palate and immersion of the prosthesis in 0.25% sodium hypochlorite solution (positive control); (2) brushing of the palate and immersion of the prosthesis in 0.15% triclosan solution; (3) brushing of the palate and immersion of the prosthesis in lactose monohydrate; or (4) brushing the palate with citric acid and immersing the prosthesis in lactose monohydrate. The response variables will be heart rate variability and alteration of blood pressure (systemic level), remission of DS, removal of biofilm, reduction of microbial load (colony-forming units (CFU)), mouth and prosthesis odor level, expression of MUC1, proinflammatory cytokines, C-reactive protein (CRP), viscosity, pH and salivary flow (locally); patient-centred qualitative analysis will also be undertaken. Measurements will be performed at baseline and 10 days after the interventions. The results obtained will be statistically analyzed as pertinent, with a level of significance of 0.05. DISCUSSION: This study will provide a guideline for clinical practice regarding the use of hygiene protocols in the treatment of oral diseases (DS) mediated by biofilm. Also, it may provide evidence of correlation of oral manifestation with cardiac risk. TRIAL REGISTRATION: Brazilian Registry of Clinical Trials, RBR-4hhwjb. Registered on 9 November 2018.


Assuntos
Higiene Bucal , Ensaios Clínicos Controlados Aleatórios como Assunto , Estomatite sob Prótese/terapia , Biofilmes , Método Duplo-Cego , Frequência Cardíaca , Humanos , Estomatite sob Prótese/fisiopatologia
11.
J Prosthodont ; 28(6): 634-642, 2019 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-31119843

RESUMO

PURPOSE: To investigate the influence of impaired masticatory function on the oral health-related quality of life of conventional complete denture wearers before and after the transition to implant-retained mandibular overdentures. MATERIALS AND METHODS: Masticatory function and oral health-related quality of life were evaluated in 40 edentulous patients after 3 months of adaptation to complete dentures and after transition to implant-retained mandibular overdentures. Masticatory function was evaluated through the swallowing threshold test with a standardized portion of an artificial test food (Optocal) to determine median particle size (×50) and homogenization index (B). After the test, the masticatory function outcomes were used to categorize patients in 2 groups according to chewing performance: (i) satisfactory or (ii) unsatisfactory. The cutoff value for ×50 was based on a preestablished value of 3.68 mm, whereas for the B index, median values were adopted for categorization. The oral health-related quality of life was analyzed via the Oral Health Impact Profile for Edentulous Adults (OHIP-EDENT) questionnaire. The Mann-Whitney test was used to compare masticatory function outcomes and OHIP-EDENT scores, and associations were checked using the Spearman correlation test and multiple linear regression. RESULTS: Masticatory function was significantly correlated with functional limitation (p = 0.02) and physical disability (p = 0.04) for complete denture wearers with unsatisfactory masticatory function. After the transition to implant-retained mandibular overdentures, only the psychological discomfort domain (p = 0.02) was influenced by the masticatory function category. Multiple linear regression analysis revealed that only the functional limitation domain (p < 0.001) of the complete denture wearers was associated with masticatory function outcomes. CONCLUSIONS: Implant-retained mandibular overdentures eliminate the problems that lead to functional limitations, consequently improving masticatory function and oral health-related quality of life of these individuals; however, patients with unsatisfactory masticatory function after transition to implant-retained mandibular overdentures still experience more psychological discomfort.


Assuntos
Boca Edêntula , Qualidade de Vida , Adulto , Prótese Dentária Fixada por Implante , Prótese Total , Revestimento de Dentadura , Humanos , Mastigação , Saúde Bucal , Satisfação do Paciente
12.
Value Health Reg Issues ; 20: 73-78, 2019 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-31048261

RESUMO

OBJECTIVE: To develop a budgetary impact analysis regarding the possibility of offering complete upper and lower dentures to an eligible population of elderly people (above 65 years) in the São Paulo state, Brazil. METHODS: The proportion of eligible population was calculated by assessing the prevalence of edentulous (upper and lower arch) and by defining the eligible group (public health system users). The budgetary impact analysis was designed under the following scenario: 5-year time horizon (2018-2022), prospect of municipal expenses with prostheses, and additional progressive incorporation of technology (upper and lower dentures) at an annual rate of 10%, 15%, 20%, 25%, and 30%. Sensibility analysis was performed in 3 different situations (reference, more pessimistic, and more optimistic) based on the calculation of spending through assessed demand and epidemiological demand. RESULTS: The municipal cost for each denture, already discounted the value transferred by the union for this procedure, was R$50.97. The incremental impact on the budget measured by the epidemiological demand relative to assessed demand was approximately R$59 141 510 over 5 years, meaning an impact of 0.08% (0.01% more optimistic; 0.13% more pessimistic) of the "medium and high complexity care" budget and 0.09% (0.03%-0.14%) of the primary care budget. CONCLUSION: The budgetary impact of increasing the oral rehabilitation with complete dentures for elderly population in the São Paulo state is low relative to the expenses with primary or specialized care budgets. In addition, incorporation of denture rehabilitation would be feasible, according to the financial availability and priorities of each municipality.


Assuntos
Prótese Total/economia , Custos de Cuidados de Saúde/estatística & dados numéricos , Reabilitação Bucal/economia , Idoso , Brasil , Prótese Total/estatística & dados numéricos , Feminino , Humanos , Masculino , Reabilitação Bucal/estatística & dados numéricos
13.
J Dent Educ ; 83(3): 303-313, 2019 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-30692186

RESUMO

With populations aging around the world, the need for complete dentures is likely to increase in Brazil and other developing countries, as well among low-income populations globally, making the teaching of cost-efficient techniques to dental students essential. The aim of this study was to evaluate the effectiveness of complete dentures fabricated by the simplified method in comparison to the conventional method regarding patients' oral health-related quality of life (OHRQoL) and satisfaction, dentures' functional quality, and masticatory performance of patients who were rehabilitated by dental students. From February 2016 to April 2017, final-year dental students at the Federal University of Alfenas, Brazil, were instructed to fabricate new complete dentures for 36 edentulous patients, who were randomly divided into two groups according to denture manufacturing method: simplified method or conventional method. Patients' OHRQoL and satisfaction and the prostheses quality were evaluated at one, three, and six months. Masticatory performance was evaluated at three months. The results showed there was no significant difference between the two methods regarding OHRQoL, patient satisfaction, prostheses quality, or masticatory performance (p>0.05). All aspects evaluated also remained constant for the same group (simplified method or conventional method) in all periods of evaluation (p>0.05). The study concluded that the simplified method for complete denture fabrication was able to produce protheses with functional quality and patient satisfaction comparable to those produced with the conventional method, even when made by dental students.


Assuntos
Prótese Total , Educação em Odontologia/métodos , Ensino , Idoso , Brasil , Planejamento de Dentadura/métodos , Planejamento de Dentadura/normas , Prótese Total/normas , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Satisfação do Paciente , Estudantes de Odontologia
14.
J Prosthodont ; 28(1): e21-e26, 2019 Jan.
Artigo em Inglês | MEDLINE | ID: mdl-29120095

RESUMO

PURPOSE: To evaluate the effect of the technical quality of conventional complete dentures (CD) on masticatory efficiency and quality of life (QoL) of denture wearers during a 1-year follow-up. MATERIALS AND METHODS: A prospective clinical trial with 32 edentulous patients (mean age of 60.2 years) wearing mandibular and maxillary dentures was conducted. All patients were evaluated wearing their preexisting dentures and after 3, 6, and 12 months postinsertion of new dentures. A reproducible method for objective evaluation of the technical quality of CDs was employed. Masticatory efficiency was evaluated by the colorimetric method using beads as artificial testing food. The oral health impact on patient QoL was measured using the OHIP-EDENT (Oral Health Impact Profile in Edentulous Adults) questionnaire. The nonparametric Wilcoxon test was applied to reveal any differences in technical quality between the preexisting and new dentures. The Friedman test was used to detect differences in masticatory efficiency and oral health impact on QoL. Spearman's correlation was applied to reveal correlation between the variables. RESULTS: Comparing preexisting and new dentures, significant improvement was found in technical quality between the dentures (p < 0.001). There was no statistically significant difference in masticatory efficiency. A significant decrease was found in the total OHIP-EDENT scores after denture replacement. A positive correlation was found between technical quality and OHIP in the new denture wearers (p = 0.011). CONCLUSIONS: According to the results of this study, denture quality significantly improved patients' oral health-related QoL; however, insertion of new dentures did not influence masticatory efficiency.


Assuntos
Prótese Total/normas , Mastigação , Qualidade de Vida , Planejamento de Dentadura/normas , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Estudos Prospectivos , Fatores de Tempo
15.
J Prosthodont Res ; 62(4): 479-484, 2018 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-30006264

RESUMO

PURPOSE: Evaluate how clinical factors related to conventional complete denture (CCD) wearers, can influence masticatory function (MF) of totally edentulous patients before and after one-year transitioning to implant-retained mandibular overdentures (IMO). METHODS: Forty patients using CCD were rehabilitated with IMO and their MF was evaluated by: (i) ST_X50: theoretical aperture through which 50% of the weight of the particles would pass; (ii) STB: distribution homogeneity of the crushed particles. The clinical parameters analyzed were: atrophy, retention, stability, facial type, anteroposterior skeletal discrepancy, and type of loading. The statistical association was tested through crude and adjusted logistic regression. RESULTS: IMO promoted improvements in the MF, irrespective of the clinical parameters. CCD wearers with poor retention had 86% less chance of achieving a good ST_X50. STB was associated with stability, facial type, and anteroposterior discrepancy. Subjects with poor mandibular CCD stability had a 76% lower chance of achieving a good test food homogenization, whereas brachyfacial individuals were 1.3 times more likely to have a good STB. Class II patients had an 89% lower chance of having a good homogenization of the particles as CCD users and after transition to IMO. CONCLUSIONS: CCD users with poor retention achieved an inferior ST_X50. The STB performance can be compromised by poor stability or Class II characteristics, while brachyfacial individuals achieve better homogenezation of the food bolus. Although the transition to IMO improved the masticatory function, the anteroposterior discrepancy still maintained an association with STB, as Class II individuals still presented difficulties homogenizing food.


Assuntos
Prótese Total , Revestimento de Dentadura , Mandíbula , Mastigação/fisiologia , Boca Edêntula/fisiopatologia , Boca Edêntula/reabilitação , Idoso , Retenção de Dentadura , Feminino , Humanos , Modelos Logísticos , Masculino , Fatores de Tempo
16.
ProteseNews ; 4(1): 54-62, jan.-mar. 2017. ilus
Artigo em Português | BBO - Odontologia | ID: biblio-859167

RESUMO

A reabilitação fixa de pacientes desdentados totais com próteses conhecidas como protocolo de Brånemark é uma alternativa indicada com grande previsibilidade e um bom prognóstico nas reabilitações com implantes osseointegrados. Essas próteses proporcionam maior eficiência mastigatória, conforto e estética, quando comparadas a próteses removíveis convencionais. Tradicionalmente, essa modalidade reabilitadora protética é confeccionada com dentes e gengiva em resina acrílica, o que favorece o acúmulo de biofilme. Além disso, apresentam degradação e desgaste, principalmente dos dentes, o que contribui para a perda da dimensão vertical de oclusão e perda da estabilidade oclusal. No intuito do controle das desvantagens apresentadas, uma alternativa utilizada é a individualização dos dentes com coroas cerâmicas. As coroas individuais, além de atribuírem melhor estética para a reabilitação, também são responsáveis por melhor passividade, longevidade, possibilidade de reparos e estabilidade oclusal.


The rehabilitation of completely edentulous patients with fixed restorations known as Brånemark protocol is an alternative with great predictability and good prognosis in the field of dental implants. These restorations provide better masticatory efficiency, comfort, and esthetics, when compared to the conventional removable dentures. In general, this prosthetic modality receives artificial gingiva and acrylic teeth, which favors plaque buildup. besides, degradation and wear can be seen, particularly at teeth, contributing to the loss of vertical occlusal dimension and stability. For this, an alternative is to provide individual ceramic crowns. Besides providing better esthetics, passivity, longevity, stability, and the chance of repair are possible in this scenario.


Assuntos
Humanos , Feminino , Pessoa de Meia-Idade , Coroas , Implantação Dentária , Prótese Dentária Fixada por Implante , Prótese Total , Estética Dentária , Reabilitação Bucal
17.
J Prosthodont ; 26(3): 196-200, 2017 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-26496691

RESUMO

PURPOSE: To examine the extent to which denture satisfaction can be determined by a measure of the denture's functional quality and by patient-reported measures. MATERIALS AND METHODS: This study used data obtained from 117 edentulous individuals with a mean age of 73.7 (SD = 5.6) years in southern Brazil. The edentulous individuals rated their levels of general satisfaction with their actual dentures, using a visual analog scale. Explanatory variables included the individual's information about ability to chew, ability to speak, esthetics, and sociodemographic factors. The dentures were evaluated using the validated 9-item Functional Assessment of Dentures instrument. Bivariate statistical analyses and Poisson regression models (prevalence ratio [PR]; 95% CI; p < 0.05) were used to test the association of explanatory variables with patients' general satisfaction with their complete dentures. RESULTS: There was a statistically significant association between patients' general satisfaction and stability of maxillary (rocking movement) (adjusted PR = 1.28; 95% CI: 1.07-1.52) and mandibular dentures (occlusal displacement) (adjusted PR = 1.68; 95% CI: 1.16-2.43), masticatory ability (adjusted PR = 1.54; 95% CI: 1.08-2.19), and the age of the mandibular denture (adjusted PR = 1.47; 95% CI: 1.10-1.97). CONCLUSIONS: The results of this study indicated that measures of denture stability, masticatory ability, and age of dentures appeared to be determinants of patients' satisfaction with dentures.


Assuntos
Prótese Total , Satisfação do Paciente , Idoso , Brasil , Retenção de Dentadura , Estética Dentária , Feminino , Humanos , Arcada Edêntula/reabilitação , Masculino , Mastigação/fisiologia , Inquéritos e Questionários
18.
Clin Oral Implants Res ; 28(10): e169-e174, 2017 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-27616640

RESUMO

OBJECTIVES: The aim of this study was to investigate the outcomes of the installation of two implant-supported overdentures until such treatment is complete. Although this treatment is well established in the literature, there are no studies comparing what happens to muscles and the quality of life (QoL) of patients during the treatment. METHODS: We selected 13 completely edentulous patients, according to inclusion and exclusion criteria, to rehabilitate with mandibular overdentures retained by two dental implants and a complete denture as antagonists. We evaluated the efficacy of the treatment and its evolution in five steps: (i) initially, with the old complete dentures, (ii) after the implants' placement with the mandibular prosthesis relined, (iii) after the placement of the healing abutments, (iv) after the installation and adaptation of new prostheses, and (v) after a 3-month follow-up period. At each stage, we evaluated patients via temporal and masseter electromyography (EMG), molar and incisive bite force, and QoL. RESULTS: The results for EMG found a decrease in muscle activity during rest, the mastication of raisins, and lateral movements when the overdentures were installed. For the bite force and QoL, there was a gradual improvement from the placement of the healing abutments period (P Ë‚ 0.05), which was sustained until the follow-up. CONCLUSIONS: Comfort and stability improved during the treatment, demonstrated by the QoL and bite force results. These results are positive for elderly patients who might refuse an implant-supported overdenture due to treatment length.


Assuntos
Força de Mordida , Prótese Dentária Fixada por Implante , Revestimento de Dentadura , Eletromiografia , Músculo Masseter/fisiologia , Boca Edêntula/reabilitação , Boca Edêntula/cirurgia , Qualidade de Vida , Músculo Temporal/fisiologia , Idoso , Feminino , Humanos , Masculino , Mandíbula
19.
Trials ; 17(1): 533, 2016 11 04.
Artigo em Inglês | MEDLINE | ID: mdl-27814749

RESUMO

BACKGROUND: Preliminary clinical studies on the single-implant mandibular overdenture (SIMO) have reported favorable results as an alternative to the conventional complete dentures for rehabilitation of the edentulous mandible. Clinical and patient-reported outcomes were assessed but no evidence is available with respect to the cost-effectiveness of this treatment, which is particularly important to test whether the incremental cost associated with the implant treatment is justified facing the benefits from the intervention. Thus, the aim of this study is to assess the cost-effectiveness of single-implant mandibular overdentures. METHODS/DESIGN: This randomized clinical trial will include edentulous individuals who meet eligibility criteria. Participants will be randomized into one of the treatment groups: a conventional complete denture group or a single-implant mandibular overdenture group. Direct costs related to therapies in both groups will be identified, measured and valuated for 1 year after treatment. Oral health-related quality of life and satisfaction with the dentures will be the primary outcome variables. Incremental cost-effectiveness ratios will be estimated and graphically presented on cost-effectiveness planes. A Markov decision tree will be constructed to set out the consequences of the competing alternatives. Sensitivity analysis on the most important assumptions will be performed in order to assess the robustness of the model. DISCUSSION: This is the first trial-based cost-effectiveness study on single-implant mandibular overdentures. Specific challenges in designing the protocol are considered. The expected results are of high clinical relevance and may contribute to the decision-making process when choosing between different alternatives for the rehabilitation of the edentulous mandible. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT02710357 , registered on 11 March 2016.


Assuntos
Protocolos Clínicos , Prótese Dentária Fixada por Implante , Prótese Total Inferior , Revestimento de Dentadura , Mandíbula/cirurgia , Análise Custo-Benefício , Implantes Dentários , Humanos , Mastigação
20.
BMC Oral Health ; 17(1): 5, 2016 Jul 04.
Artigo em Inglês | MEDLINE | ID: mdl-27430364

RESUMO

BACKGROUND: Brazil has severe socioeconomic inequalities, resulting in major oral health problems for the Brazilian elderly, such as tooth loss and, consequently, a need for oral rehabilitation. The aim of this study was to evaluate inequalities in complete denture need among older Brazilian adults in relation to social determinants at individual and contextual levels. METHODS: This retrospective study was based on data from the national oral health survey, SB Brasil 2010, in which 7,619 older adults aged 65-74 years participated. The dependent variable was complete denture need. The independent variables at the first level were age, sex, race, and socioeconomic status. The independent variables that were used to identify inequality at the contextual level were geographic region of Brazil, the population of the municipality where the subject lived, whether the subject lived in the state capital or not, and the Human Development Index. In order to describe the socioeconomic characteristics, a socioeconomic cluster variable was created using the multivariable cluster analysis technique. Prevalence ratios (PRs) with 95 % confidence intervals (CIs) were determined to evaluate the effect of each variable. Two-level multivariable modeling was performed to examine the individual and contextual effects. RESULTS: There was a high prevalence of complete denture need among older Brazilian adults. The main factors associated with the prevalence of complete denture need were individual socioeconomic status (PR: 1.81; 95 % CI: 1.65-1.99), and the city-level contextual effect (PR: 1.20; 95 % CI: 1.08-1.34). CONCLUSIONS: Consistently poor rates of oral health rehabilitation were found among older Brazilian adults, and were associated with significant social inequality. Complete denture need was strongly associated with individual socioeconomic position. It was also verified that the Human Development Index, the city-level contextual effect, was associated with complete denture need.


Assuntos
Prótese Total , Disparidades em Assistência à Saúde , Saúde Bucal , Fatores Socioeconômicos , Idoso , Brasil , Estudos Transversais , Feminino , Humanos , Masculino , Estudos Retrospectivos
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA