RESUMO

Objective: The aim of this study was to evaluate the roughness, hardness, and color change of pit and fissure sealants of two commercial brands (Fluroshield ™ and Ultraseal XT ™) incorporated with nanostructured silver vanadate nanomaterial decorated with silver nanoparticles (ß-AgVO3) in concentrations (0% - control, 2.5% and 5%). Material and methods: Two commercial brands Fluroshield TM and Ultraseal XT ™ were used to make the samples with dimensions of 6 × 6 × 4 mm. The control group was made according to the manufacturer's instructions and in the groups with the addition of ß-AgVO3, the nanomaterial was added proportionally by mass at percentages of 2.5% and 5%. Roughness properties were evaluated using a 3D Laser Confocal Microscope (n = 10), Knoop microhardness by Microdurometer (n = 10), and color change by Portable Color Spectrophotometer on the CIEDE2000 system (n = 10). Data were evaluated by one-way ANOVA with Bonferroni adjustment and Tukey's mean comparison test at a 5% significance level. Results: Ultraseal XT ™ sealant roughness showed a significant difference between concentrations with the highest mean for the 5% group (P = 0.010). Regarding the hardness, both sealants showed no significant difference between the groups. Fluroshield ™ sealant showed a significant difference in ΔE00 between the control-2.5% 24.93 (3.49) and control-5% 28.41 (2.58). Conclusion: It may be concluded that the incorporation of ß-AgVO3 influenced the increase in roughness for Ultraseal XT ™ pit and fissure sealant, did not interfere with the microhardness of both sealants, and promoted a change in the color of Fluroshield ™ sealant within clinically acceptable limits.

RESUMO

BACKGROUND: Few studies have investigated the effect of violet LED irradiation associated or not with bleaching agents on blood-stained teeth. This in vitro study aimed to evaluate the whitening efficacy and color stability of non-vital dental bleaching using 35% hydrogen peroxide (HP) photoactivated with violet LED (VL) compared to 35% HP alone and 35% HP photoactivated with blue LED (BL). METHODS: Fifty bovine dental crowns were used to obtain specimens of 5 × 5 × 2 mm. After selection based on a previous colorimetric analysis, the specimens were blood-stained and randomly assigned into five groups (n = 10): control (no treatment); 35% HP, 35% HP/BL; 35% HP/VL; and VL. Three bleaching sessions were performed and the colorimetric analysis (∆Eab, ∆L, and ∆WID) was recorded after 7 days, 30 days, and 9 months of the last bleaching session. Two-way repeated measures ANOVA followed by Bonferroni post-hoc test was used at a significance level of 5%. RESULTS: 35% HP, 35% HP/BL, and 35% HP/VL showed higher values of ∆Eab, ∆L, e ∆WID (P < 0.05), without intra- and intergroup differences (P > 0.05). C and VL were similar in all the evaluation times (P > 0.05), showing lower values of ∆Eab, ∆L, and ∆WID (P < 0.05). CONCLUSIONS: 35% HP/VL can be a viable alternative for dental bleaching in endodontically-treated teeth, showing bleaching efficacy similar to 35% HP solely used, even after a 9-month follow-up. VL used alone was not effective to bleach blood-stained teeth.

Assuntos

RESUMO

OBJECTIVE: To evaluate the impact of desensitizing toothpastes (D), their whitening versions (DW) and whitening toothpastes (W) on tooth color change. METHODS: Tooth specimens were allocated into 11 groups (n = 10): 1. Artificial saliva (control); 2. Sensodyne Repair & Protect (SRP-D); 3. Sensodyne Repair & Protect Whitening (SRP-DW); 4. Colgate Sensitive Pro-Relief (CSPR-D); 5. Colgate Sensitive Pro-Relief Real White (CSPR-DW); 6. Colgate Total 12 (CT12); 7. Colgate Total 12 Whitening (CT12-W); 8. Sensodyne True White (ST-W); 9. Curaprox Black Is White (CB-W); 10.Oral-B 3D White Perfection (OB3D-W) and 11. Erosion-only. They were submitted to two models: A. abrasion; B. erosion/abrasion. Color change (ΔE00 ), ΔL, Δa, and Δb were determined with a spectrophotometer. Data were statistically evaluated (α = 0.05). RESULTS: For both models, ∆E00 of D did not differ significantly from DW. An overall decrease in luminosity (-∆L) and increase (+∆b) in yellowness of the tooth occurred. In abrasion, all groups reduced redness (-∆a) and only SRP-DW differed from control (p = 0.016), but for ∆E00 , ∆L and ∆b, all toothpastes did not differ from the control. In erosion/abrasion, CB-W showed significantly lower ∆E00 and ∆b than the control (∆E00 : p = 0.026; ∆b: p = 0.005) and SRP-D (∆E00 : p = 0.028; ∆b: p = 0.025). Only SRP-DW, CSPR-DW, ST-W, CB-W, and erosion-only had increased redness (+∆a), but none differed from control. CONCLUSIONS: The toothpastes did neither promote whitening nor avoid the yellowish aspect of the tooth after abrasion and erosion-abrasion, regardless of their claim. CLINICAL SIGNIFICANCE: Desensitizing and/or whitening toothpastes induced similar changes on tooth color, without promoting whitening effect or reduction in its yellowish aspect.

Assuntos

RESUMO

OBJECTIVES: To evaluate if the topical application of Otosporin® before in-office bleaching with a 35% hydrogen peroxide (HP) gel reduces the risk and intensity of tooth sensitivity (TS), as well as the bleaching effectiveness. MATERIALS AND METHODS: Twenty participants were selected for this split mouth, triple-blind, multicenter randomized clinical trial. Before each bleaching session, the placebo was applied in the patient's hemi-arch and the other half received the Otosporin®, according to the randomization procedure. Both products were applied topically for 10 min. The 35% HP was applied in two sessions with a 1-week interval. The risk and intensity of TS were assessed using the Numerical Scale (NRS) and the Visual Analog Scale (VAS). The bleaching effectiveness were evaluated with the visual scales and with a digital spectrophotometer. The absolute risk of TS was compared by McNemar's test. To compare the intensity of TS, the Wilcoxon signed-rank test was used to evaluate the NRS, while the paired t test was used to evaluate VAS. Bleaching effectiveness (ΔSGUs and ΔEab, ΔE00, and ΔWID) was compared between groups using the paired t-test (α = 0.05). RESULTS: No significant difference at risk (p = 1.0) and intensity of TS (p > 0.59; VAS and p = 1.00 for NRS) was detected between groups. For both groups, a significant bleaching was observed after 30 days of evaluation (p < 0.39). CONCLUSIONS: The previous application of Otosporin® in the in-office bleaching did not reduce the risk and intensity of TS and did not affect the effectiveness of the bleaching. CLINICAL RELEVANCE: The application of Otosporin® before in-office bleaching with 35% HP was not able to reduce the risk and intensity of TS.

Assuntos

RESUMO

There is a constant search for bleaching treatments that can offer greater safety with fewer adverse effects, especially in the techniques performed in the office, which usually employ hydrogen peroxide in high concentrations (35% to 40%) that are not recommended by some international control agencies. This in vitro study evaluated the color change after tooth bleaching with the use of ozone and a 10% ozonized carbamide peroxide bleaching treatment for in-office use. Thirty molars were allocated (n = 10): three applications of ozone (1 hour every 3 days); three applications of 10% ozonized carbamide peroxide (1 hour every 3 days); 10% carbamide peroxide agent (8 hours a day for 7 days). The teeth were mounted on a plaster model to simulate the dental arch, and trays made of silicone were used for the application of the bleaching agents and to allow ozone to enter through. The ozone concentration used was 60 µg/mL, with an oxygen flow of 0.25 L/min. The values of color change showed no significant differences among treatments. The variations in the parameters over time, as well as the values of ΔEab, ΔE00, and WID, showed that there was no significant difference among the three treatments. The use of ozone and 10% ozonized carbamide peroxide for in-office use was effective for tooth bleaching with clinically perceptible and acceptable color alterations. The study was approved on September 10, 2019 by the São Leopoldo Mandic Ethics Research Committee (CAAE No. 17711719.4.0000.5374).

Assuntos

RESUMO

In most cases, conventional drying produces inferior quality products and requires higher drying times. A continuous pilot Refractance Window® equipment was used to dry Aloe vera gel slabs of 5 and 10 mm thick at 60, 70, 80, and 90 °C, seeking a dry product with high-quality retention. Based on five empirical models, drying kinetics, diffusion coefficient, and activation energy were analyzed. Midilli-Kuck was the best predicting model. Short drying times (55-270 min) were needed to reach 0.10 g water/g solid. In addition, the technique yielded samples with high rehydration capacity (24-29 g water/g solid); high retention of color (∆E, 3.74-4.39); relatively low losses of vitamin C (37-59%) and vitamin E (28-37%). Regardless of the condition of temperature and sample thickness, a high-quality dried Aloe vera gel could be obtained. Compared with other methods, Refractance Window® drying of Aloe vera achieved shorter drying times with higher quality retention in terms of color, vitamins C and E, and rehydration. Finally, the dried Aloe vera gel could be reconstituted to a gel close to its fresh state by rehydration.

RESUMO

Objective: This in vivo study compared two bleaching techniques with regard to the degree of tooth sensitivity (TS), color change, and treatment stability for a 6-month follow-up period. Materials and methods: Sixty volunteers were selected according to inclusion and exclusion criteria and submitted to in-office bleaching. For group 1, we performed one bleaching session with a 35% hydrogen peroxide gel and a second bleaching session after 7 days; for group 2, we performed two bleaching sessions with two applications per session, each session with a 7-day interval, using a light-emitting diodes (LEDs) device emitting violet light (405-410 nm) without employing peroxide-containing bleaching gel. TS was recorded immediately before and immediately after each bleaching session using the Variance Analogic Scale. The color of upper central incisors and upper canines at baseline was recorded immediately after each bleaching session, after 15, 30, and 180 days, with a value-oriented shade guide used by two well-trained observers. Results: The two whitening protocols results were similar regarding the immediate effectiveness and 6-month stability of tooth whitening. Dental bleaching with violet LED did not promote postoperative pain sensitivity at any of the evaluated times. However, dental bleaching performed with 35% hydrogen peroxide promoted higher postoperative pain sensitivity. Conclusions: The violet light alone provided dental bleaching and had the clinical advantage of promoting less immediate postoperative sensitivity; however, an unwanted repigmentation occurred after dental bleaching with light alone.

Assuntos

RESUMO

Abstract This study investigated the effects of oxygen inhibition and finishing/polishing procedures on the composite resin properties. One bulk-fill and two conventional composite resins (nanoparticle and microhybrid) were evaluated. Specimens were prepared using 4 surface treatments: control, no treatment; Gly, oxygen inhibition with glycerin; FP, finishing and polishing; Gly + FP, glycerin followed by finishing and polishing. The degree of conversion (DC) was measured using Fourier Transformed Infrared Spectroscopy (FTIR) immediately and after 15 days (n=5). Color stability (ΔEab, and ΔE00) and opacity were evaluated using a spectrophotometer after 15 days of immersion in coffee, using the CIELAB system (n=5). Data were analyzed by two-way ANOVA and Tukey tests (α=0.05) and opacity by two-way repeated-measures ANOVA. Glycerin usage increased significantly the DC however had no influence on the ΔEab, ΔE00 and, opacity values. Finishing and polishing reduced ΔEab and ΔE00 values, regardless of composite resins. Microhybrid showed higher opacity, followed by the nanoparticle and bulk fill, regardless of surface treatment. Post-polymerization polishing procedures resulted in lower conversion than using an oxygen inhibitor agent (Gly condition), but similar staining caused by coffee.

Resumo Este estudo investigou os efeitos da inibição de oxigênio e dos procedimentos de acabamento/polimento nas propriedades das resinas compostas. Foram avaliadas uma resina composta bulk fill e duas resinas convencionais (nanoparticulada e microhíbrida). Os espécimes foram confeccionados, variando o tratamento de superfície: controle, sem tratamento; glicerina (inibidor de oxigênio); acabamento e polimento; glicerina + acabamento e polimento. O grau de conversão (GC) foi medido pela Espectroscopia de Infravermelho Transformada de Fourier (FTIR) imediatamente e após 15 dias da confecção dos espécimes (n=5). Os índices de alteração de cor ΔEab, ΔE00 e opacidade foram avaliados por meio de espectrofotômetro, após 15 dias de imersão no café, utilizando o sistema CIELAB (n=5). Os dados da alteração da cor foram analisados pelos testes ANOVA de dois fatores e Tukey (α=0,05) e a opacidade por ANOVA de medidas repetidas. O uso de glicerina aumentou significativamente o GC, no entanto, não teve influência sobre os valores ΔEab e ΔE00. O acabamento e o polimento reduziram os valores de ΔEab e ΔE00, independentemente da resina composta. A resina microhíbrida apresentou maior opacidade, seguida pela nanoparticula e bulk-fill, independentemente do tratamento de superfície. O acabamento e polimento resultou em menor grau de conversão das resinas compostas se comparado ao uso de um agente inibidor de oxigênio (glicerina), porém apresenta resultados similares para a pigmentação pelo café.

Assuntos

RESUMO

A clinical case in which skin and hair color change occurred after sacrococcygeal epidural anesthesia in a nine-month-old Siamese cross queen undergoing ovariohysterectomy (OHE) is described. Six weeks after surgery, during a re-check, it was noted that in the sacrococcygeal region the color of the skin and new hair growth was dark with a color comparable to the color present on the body extremities (muzzle, pinnae, legs, and tail). The skin and new hair growth of the shaved abdomen presented a standard color. The key enzyme of the melanogenic pathway in mammals is tyrosinase (TYR), and the Siamese temperature-sensitive phenotype is the result of genetic mutations that makes TYR function thermolabile. The activity of TYR in these cats is limited to the extremities where the temperature is lower while pigment production is impaired in the other body areas. The trichotomy of the sacrococcygeal region performed during wintertime in an outdoor cat was probably the trigger for increased activity of TYR in this area promoting pigment production. The absence of the same alterations in the abdominal area may be justified by less exposure of that region to the external environment, as well as to the feline habits of sedentarism, that avoid significant cooling in these regions. This report highlights the importance of taking this type of occurrence into account when performing an epidural in the Siamese cat breed. Also, to avoid skin color change in this breed, the authors recommend a midline abdominal instead of a flank approach to perform OHE.(AU)

Descreve-se um caso clínico no qual ocorreu mudança na cor da pele e do pelo após anestesia epidural sacrococcígea numa gata cruzada de raça Siamês de nove meses submetida à ovariohisterectomia (OVH). Seis semanas após a cirurgia, durante uma avaliação pós-operatória, notou-se que na região sacrococcígea, a cor da pele e o crescimento do pelo apresentavam uma cor escura, comparável à das extremidades do corpo (face, orelhas, membros e cauda). A pele e o crescimento do pelo do abdómen, que também havia sido tosquiado, apresentavam uma cor padrão. A enzima chave da via melanogênica em mamíferos é a tirosinase (TYR) e o fenótipo siamês sensível à temperatura é o resultado de mutações genéticas que tornam a função TYR termolábil. A atividade da TYR nestes gatos é limitada às extremidades onde a temperatura é mais baixa, enquanto a produção de pigmento é prejudicada em outras áreas do corpo. A tricotomia da região sacrococcígea realizada durante o inverno nesta gata com acesso livre ao ambiente externo, provavelmente determinou um aumento da atividade da TYR nesta área, promovendo a produção de pigmento. A ausência das mesmas alterações na região abdominal pode ser justificada pela menor exposição desta área do corpo ao ambiente externo, também devido aos hábitos felinos de sedentarismo, que evitam resfriamento significativo nestas regiões. Este relato destaca a importância de se levar em consideração a possibilidade deste tipo de ocorrência quando da realização de uma anestesia epidural nesta raça de gatos. Além disso, os autores recomendam uma abordagem abdominal na linha média ao invés de uma abordagem de flanco para realizar a OVH nesta raça, a fim de evitar a alteração da cor da pele.(AU)

Assuntos

RESUMO

A clinical case in which skin and hair color change occurred after sacrococcygeal epidural anesthesia in a nine-month-old Siamese cross queen undergoing ovariohysterectomy (OHE) is described. Six weeks after surgery, during a re-check, it was noted that in the sacrococcygeal region the color of the skin and new hair growth was dark with a color comparable to the color present on the body extremities (muzzle, pinnae, legs, and tail). The skin and new hair growth of the shaved abdomen presented a standard color. The key enzyme of the melanogenic pathway in mammals is tyrosinase (TYR), and the Siamese temperature-sensitive phenotype is the result of genetic mutations that makes TYR function thermolabile. The activity of TYR in these cats is limited to the extremities where the temperature is lower while pigment production is impaired in the other body areas. The trichotomy of the sacrococcygeal region performed during wintertime in an outdoor cat was probably the trigger for increased activity of TYR in this area promoting pigment production. The absence of the same alterations in the abdominal area may be justified by less exposure of that region to the external environment, as well as to the feline habits of sedentarism, that avoid significant cooling in these regions. This report highlights the importance of taking this type of occurrence into account when performing an epidural in the Siamese cat breed. Also, to avoid skin color change in this breed, the authors recommend a midline abdominal instead of a flank approach to perform OHE.(AU)

Descreve-se um caso clínico no qual ocorreu mudança na cor da pele e do pelo após anestesia epidural sacrococcígea numa gata cruzada de raça Siamês de nove meses submetida à ovariohisterectomia (OVH). Seis semanas após a cirurgia, durante uma avaliação pós-operatória, notou-se que na região sacrococcígea, a cor da pele e o crescimento do pelo apresentavam uma cor escura, comparável à das extremidades do corpo (face, orelhas, membros e cauda). A pele e o crescimento do pelo do abdómen, que também havia sido tosquiado, apresentavam uma cor padrão. A enzima chave da via melanogênica em mamíferos é a tirosinase (TYR) e o fenótipo siamês sensível à temperatura é o resultado de mutações genéticas que tornam a função TYR termolábil. A atividade da TYR nestes gatos é limitada às extremidades onde a temperatura é mais baixa, enquanto a produção de pigmento é prejudicada em outras áreas do corpo. A tricotomia da região sacrococcígea realizada durante o inverno nesta gata com acesso livre ao ambiente externo, provavelmente determinou um aumento da atividade da TYR nesta área, promovendo a produção de pigmento. A ausência das mesmas alterações na região abdominal pode ser justificada pela menor exposição desta área do corpo ao ambiente externo, também devido aos hábitos felinos de sedentarismo, que evitam resfriamento significativo nestas regiões. Este relato destaca a importância de se levar em consideração a possibilidade deste tipo de ocorrência quando da realização de uma anestesia epidural nesta raça de gatos. Além disso, os autores recomendam uma abordagem abdominal na linha média ao invés de uma abordagem de flanco para realizar a OVH nesta raça, a fim de evitar a alteração da cor da pele.(AU)

Assuntos

RESUMO

Environmental temperature, particularly in habitats with extreme temperature fluctuations, may shape selection pressures on life history traits. Especially in ectotherms, temperature affects performance, physiology, and in some species, skin color. Skin color can be a sexual ornament signaling the bearer's ability to resist infections, when only high-quality individuals are able to invest both in high immune defense and elaborate ornament expression. However, how the information content of these sexual traits may vary with environmental conditions has been less studied. Dickerson's collared lizard (Crotaphytus dickersonae) males are blue and have a black and white collar. This conspicuous coloration signals performance and immune response, and is related to body temperature. Here, by maintaining males at higher, lower, and mean environmental temperatures we evaluated whether temperature variation influences color and constitutive innate humoral immunity (agglutination and lysis titers, estimated through hemolysis-hemagglutination assays), and whether extreme temperatures impose trade-offs between color and humoral immunity. We found that at low and high temperature treatments males had lower agglutination and lysis titers, and at low temperature, blue chroma from the dorsum declined and males became greener. Interestingly, at low and control temperature treatments, agglutination titer and blue coloration were positively correlated, whereas high temperatures revealed a trade-off between increasing agglutination titers and displaying bluer skin color. Our results suggest that in the Dickerson collared lizard even short-term variation of environmental temperature affects performance of constitutive innate humoral immunity and the brilliant blue skin color. Particularly, high temperatures may compromise some components of male's immunity and sexual signaling.

Assuntos

RESUMO

The aim of this study was to investigate the ability of a novel silica (SiO2 )-based nanocoating approach to extend the superficial integrity of current composites. Cylindrical discs (7 × 2 mm) were produced from nanohybrid and nanofilled composites. Specimens in control groups were not coated, but SiO2 nanocoating was performed on specimens in experimental groups (n = 8). Specimens were stored for 24 h in distilled water at 37°C (baseline) and then artificially aged for 15, 90, or 180 d in a low-pH staining solution. Surface roughness (Ra) was measured using a profilometer, and a goniometer was used to determine surface free energy (SFE). Color change was evaluated by a reflectance spectrophotometer, applying the color distance metric, ΔE00 , according to the Commission Internationale de l'Eclairage (CIE) L*a*b* coordinates. Data were subjected to repeated-measures anova and the Tukey post-hoc test. Composites presented visually perceptible color changes (ΔE00  > 0.81) as early as 15 d of aging, with significantly higher ΔE00 values recorded over time. Nanocoating with SiO2 significantly reduced the SFE of composites at all storage times, and significantly lower Ra values were identified after aging. Nanohybrid and nanofilled composites were susceptible to substantial hydrolytic superficial degradation and staining, which was dramatically attenuated by the proposed SiO2 nanocoating approach. Nanocoating effectively lowered the SFE of composites, thus minimizing water-composite interactions, which contributed to reduced superficial deterioration and lower stain susceptibility over time.

Assuntos

RESUMO

ABSTRACT: The objective of this study was to evaluate the color alteration of four brands of artificial teeth (Art Plus, Trilux, Bionote and Biolux), after immersion in color solutions of coffee, red wine and urucum. We used 80 artificial teeth, which were standardized with 2 mm thickness. Then, they were subjected to finishing and polishing, and divided into 4 groups (n = 05), which were immersed in one of the 3 types of dye, plus distilled water (control). The samples were immersed daily for 4 hours, then they were removed, washed in tap water, dried with absorbent paper and immersed in distilled water for the subsequent hours in a biological glasshouse at 37 ºC, for 21 days. The evaluation of the color change was made in the periods of 0, 7, 14 and 21 days, by means of the tristimulus colorimeter. The data were subjected to the ANOVA and Tukey test with a 5 % significance. The results showed that the urucum was the substance that caused the greatest staining while the coffee and the wine did not show statistical difference. Regarding trademarks, Trilux presented a statistical difference compared to the other commercial brands, revealing colorimetric alteration only in the 14-day period. It was concluded that the composition of the artificial teeth, the type of pigmenting agent and the immersion time determine the color change.

RESUMEN: El objetivo de este estudio fue evaluar la alteración de color de cuatro marcas de dientes artificiales (Art Plus, Trilux, Bionote y Biolux), después de inmersión en soluciones colorantes de café, vino tinto y urucum. Se utilizaron 80 dientes artificiales, los cuales fueron estandarizados con 2 mm de espesor. En seguida, los mismos fueron sometidos al acabado y pulido, y divididos en 4 grupos (n = 5), los cuales fueron inmersos en uno de los 3 tipos de colorante, más agua destilada (control). Las muestras permanecieron inmersas diariamente durante 4 horas, luego fueron retiradas, lavadas en agua corriente, secas con papel absorbente e inmersas en agua destilada por las horas subsiguientes en invernadero biológico a 37 ºC, por 21 días. La evaluación del cambio de color se realizó en los períodos de 0, 7, 14 y 21 días, por medio del colorímetro tristimulo. Los datos fueron sometidos a la prueba ANOVA y Tukey con un 5 % de significancia. Los resultados demostraron que el urucum fue la sustancia que provocó mayor manchado mientras que el café y el vino no presentaron diferencia estadística. En cuanto a las marcas comerciales, el Trilux presentó una diferencia estadística en comparación con las otras marcas comerciales, revelando alteración colorimétrica sólo en el período de 14 días. Se concluyó que la composición de los dientes artificiales, el tipo de agente pigmentante y el tiempo de inmersión determinan el cambio de color.

Assuntos

RESUMO

OBJECTIVE: We aimed to perform in-vitro evaluation to compare 1) shear bond strength (SBS), adhesive remnant index (ARI), and color change between self-etched and acid-etched primers; 2) the SBS, ARI and color change between direct and indirect bonding; and 3) the enamel roughness (ER) between 12-blade bur and aluminum oxide polisher debonding methods. METHODS: Seventy bovine incisors were distributed in seven groups: control (no bonding), direct (DTBX), and 5 indirect bonding (ITBX, IZ350, ISONDHI, ISEP, and ITBXp). Transbond XT Primer was used in the DTBX, ITBX, and ITBXp groups, flow resin Z350 in the IZ350 group, Sondhi in the ISONDHI group, and SEP primer in the ISEP group. SBS, ARI, and ER were evaluated. The adhesive remnant was removed using a low-speed tungsten bur in all groups except the ITBXp, in which an aluminum oxide polisher was used. After coffee staining, color evaluations were performed using a spectrophotometer immediately after staining and prior to bonding. RESULTS: ISONDHI and ISEP showed significantly lower SBS (p < 0.01). DTBX had a greater number of teeth with all the adhesive on the enamel (70%), compared with the indirect bonding groups (0-30%). The ER in the ITBX and ITBXp groups was found to be greater because of both clean-up techniques used. CONCLUSIONS: Direct and indirect bonding have similar results and all the primers used show satisfactory adhesion strength. Use of burs and polishers increases the ER, but polishers ensure greater integrity of the initial roughness. Resin tags do not change the color of the teeth.

RESUMO

OBJECTIVE: This study aimed to evaluate the effect of 35% hydrogen peroxide at different pH values and the degree of tooth staining on whitening efficacy and enamel microhardness. MATERIALS AND METHODS: 90 enamel-dentin specimens were obtained from bovine incisors. They were randomly divided into 2 groups (n = 45), 1 group was immersed in a staining broth for 14 days, and another group was not stained and kept in distilled water at 37°C. Twenty-four hours after the staining procedure, each group was distributed into 3 subgroups that were whitened by 35% hydrogen peroxide with different pH values (5, 7, and 8.4) for 30 minutes. The color was measured at baseline and 7 days after whitening. Microhardness was measured at baseline, immediate, 24 hours, and 1 month after the whitening procedure. Data were submitted to 2-way analysis of variance (ANOVA) and the Tukey test for multiple comparisons for color analysis. Repeated measures ANOVA and the Tukey test were used to analyze microhardness data. RESULTS: The color change of the stained groups (ΔE00 = 4.6) was significantly higher than that of the nonstained groups (ΔE00 = 3.7). Microhardness value decreased significantly immediately after whitening for all subgroups and did not return to initial values. For each measurement time, microhardness was not significantly different among subgroups with different pH values. CONCLUSIONS: Despite the effectiveness of 35% hydrogen peroxide, changes on gel pH did not affect the whitening efficacy, and the enamel was superficially demineralized, regardless of pH values. CLINICAL SIGNIFICANCE: Independently of the pH value of whitening gel, enamel undergoes superficial demineralization and with a reduction in superficial microhardness that does not return to the initial values. However, using hydrogen peroxide with different pH values does not alter the whitening effect.

Assuntos

RESUMO

Tooth bleaching is considered a non-invasive treatment, although the use of highly-concentrated products may provoke increased surface roughness and enamel demineralization, as well as postoperative sensitivity. Thus, the aim of this study was to investigate whether hydrogen peroxide (H2O2) concentration would affect tooth bleaching effectiveness and the enamel surface properties. Enamel/dentin bovine specimens (6 × 4 mm) were immersed in coffee solution for 7 days and evaluated with a spectrophotometer (Easyshade; baseline), using the CIEL*a*b* color parameters. Hardness was measured using a hardness tester. The specimens were randomly assigned into four groups: one negative control, in which the specimens were not bleached, but they were irradiated with a laser-light source (Whitening Lase II, DMC Equipments); and three groups using distinct H2O2 concentration, namely LP15% (15% Lase Peroxide Lite), LP25% (25% Lase Peroxide Sensy), and LP35% (35% Lase Peroxide Sensy), all products from DMC. The bleached specimens were also irradiated with the laser-light source. After bleaching, all specimens were evaluated using scanning electron microscopy (SEM). pH kinetics and rate was monitored during bleaching. The data were analyzed using ANOVA and Tukey's test (p < 0.05). All bleaching gels produced similar color change (p > 0.05). Concerning hardness, only the LP25% and LP35% significantly reduced hardness after bleaching; also, there was a progressive tendency for a greater percentage reduction in hardness with increased H2O2 concentration of the gel (R2 = 0.9973, p < 0.001). SEM showed that LP25% and LP35% produced an etching pattern on enamel with prism rods exposure. In conclusion, H2O2 concentration above the 15% level does not increase bleaching effectiveness, and may increase the possibility for alteration of enamel hardness, surface morphology, and acidity of the medium. When using H2O2-based bleaching agents, dental practitioners should choose for less concentrated gels, e.g., around the 15% level.

Assuntos

RESUMO

BACKGROUND: pH-sensitive indicator membranes, which are useful for pharmaceutical, food, and packaging applications, can be formed by encapsulating halochromic compounds within various solid supports. Accordingly, electrospinning is a versatile technique for the development of these indicators, by entrapping pH dyes within ultrafine polymer fibers. RESULTS: The ultrafine zein fibers, containing 5% (w/v) anthocyanins, had an average diameter of 510 nm. The pH-sensitive membrane exhibited color changes from pink to green when exposed to acidic and alkaline buffers, respectively. The contact angle was negligible after 10 and 2 s for neat and 5% anthocyanin-loaded zein membranes, respectively. CONCLUSION: The pH membranes exhibited color changes in a board pH range, which can potentially be used in various active packaging applications. © 2017 Society of Chemical Industry.

Assuntos

RESUMO

OBJECTIVES: The objective of the present study is to evaluate the effects of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) on bleached enamel. MATERIALS AND METHODS: A bleaching agent (35% hydrogen peroxide) was applied, 4 × 8 min on premolar teeth (n = 8). A CPP-ACP paste was applied for 7 days. Prior and post-treatment, microtomography images were obtained and 3D regions of interest (ROIs) were selected, from outer enamel, extending to 110.2-µm depth. CT parameters of structure: thickness (St.Th), separation (St.Sp), and fragmentation index (Fr.I.) were calculated for each (ROI). Data was submitted to paired t tests at a 95% confidence level. The samples were evaluated at 3000 to 100,000 magnification. Quantitative analysis of enamel mineral content was also determined by SEM EDX. RESULTS: There was a significant increase in structure thickness and calcium content. The phosphorus content increased after bleaching. There was also a decreased separation and fragmentation index on the outer enamel to a depth of 56.2 µm (p < 0.05). There were no changes at 110.2-µm depth for the bleaching CPP-ACP association. A covering layer and decreased spaces between the hydroxyapatite crystals appeared around the enamel prisms, 7 days after the CPP-ACP application. CONCLUSIONS: The application of a CPP-ACP provides a compact structure on the enamel's outer surface, for 7 days, due to calcium deposition. CT parameters seem to be a useful tool for mineralizing and remineralizing future studies. CLINICAL RELEVANCE: CPP-ACP neutralizes any adverse effects on enamel surface when applied during a week after bleaching and minimizes any side effects of the bleaching treatment due to a more compact structure.

Assuntos

RESUMO

PURPOSE: To evaluate the color change caused by post-irradiation conversion (ΔE24h and ΔE8 days ) and artificial aging (ΔEAGING ) of resin cements light activated through ceramics of different opacities immediately and 6 minutes after manipulating the material. MATERIALS AND METHODS: Resin cement disks (Allcem and LuxaCore) were light activated through ceramics (without ceramic, e.max HT, LT, and MO) immediately and 6 minutes after the manipulation (n = 10). Spectrophotometry was used to evaluate ΔE24h and ΔE8 days after 37˚C-dry-dark-storage for 24 hours and 8 days, and ΔEAGING after 60˚C-water-storage for 24 hours. Data were analyzed with three-way ANOVA and Tukey's HSD (α = 0.05). RESULTS: Regarding the post-irradiation color change, significant differences were found between the cements (p < 0.0001), light activation protocols (p = 0.037), and ceramics (p < 0.001). The immediate activation (16.2 ± 0.1) showed lower ΔE values than the delayed activation (16.5 ± 0.1). Ceramics influenced the ΔE values as follows: MO (14.0 ± 1.2) < LT (14.9 ± 1.2) ≈ HT (15.4 ± 1.2) < control (21.2 ± 1.2). Regarding ΔEAGING , significant differences were found between cements (p < 0.001), light activation (p = 0.006), and ceramics (p < 0.001). The delayed activation (8.4 ± 0.1) showed lower values than the immediate activation (8.9 ± 0.1). Ceramic spacers influenced ΔEAGING as follows: control (5.6 ± 0.2) < MO (6.6 ± 0.2) < HT (11.0 ± 0.2) ≈ LT (11.5 ± 0.2). CONCLUSION: The delayed light activation resulted in increased color stability, while the ceramic interposition resulted in lower color stability.

Assuntos

RESUMO

We investigated the morphology and structure of the floral nectary in 11 Neotropical genera belonging to the subfamilies Dodonaeoideae and Paullinioideae (Sapindaceae) from southern South America representing three tribes (Dodonaeaeae, Paullinieae, and Melicocceae), in relation to other floral traits in species with contrasting morphological flower characteristics. Nectary organization was analyzed under light, stereoscopic, and scanning electron microscopes; Diplokeleba floribunda N.E. Br. was also observed using transmission electron microscopy. Our comparative data may contribute to the understanding of floral nectary evolution and systematic value in this family. The nectaries were studied in both staminate and pistillate flowers. All the floral nectaries are typical of Sapindaceae: extrastaminal, receptacular, structured, and persistent. The anatomical analysis revealed a differentiated secretory parenchyma and an inner non-secretory parenchyma; the nectary is supplied by phloem traces and, less frequently, by phloem and xylem traces. Nectar is secreted through nectarostomata of anomocytic type. The anatomical analysis showed the absence of nectary in the three morphs of Dodonaea viscosa flowers. Nectary ultrastructure is described in D. floribunda. In this species, the change in nectary color is related to progressive accumulation of anthocyanins during the functional phase. We found relatively small variation in the nectary structural characteristics compared with large variation in nectary morphology. The latter aspect agreed with the main infrafamilial groupings revealed by recent phylogenetic studies, so it is of current valuable systematic importance for Sapindaceae. In representatives of Paullinieae, the reduction of the floral nectary to 4-2 posterior lobes should be interpreted as a derived character state.

Assuntos