RESUMO

Catalytic reduction of nitrate over bimetallic catalysts has emerged as a technology for sustainable treatment of nitrate-containing groundwater. However, the structure of bimetallic has been much less investigated for catalyst optimization. Herein, two main types of Pd-Cu bimetallic nanocrystal structures, heterostructure and intermetallic, were prepared and characterized using high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The results show that two individual Pd and Cu nanocrystals with a mixed interface exist in the heterostructure nanocrystals, while Pd and Cu atoms are uniformly distributed across the intermetallic Pd-Cu nanocrystals. The catalytic nitrate reduction experiments were carried out in a semibatch reactor under constant hydrogen flow. The nitrate conversion rate of the heterostructure Pd-Cu nanocrystals supported on α-Al2O3, γ-Al2O3, SBA-15, and XC-72R exhibited 3.82-, 6.76-, 4.28-, 2.44-fold enhancements relative to the intermetallic nanocrystals, and the nitrogen and nitrite were the main products for the heterostructure and intermetallic Pd-Cu nanocrystals, respectively. This indicates that the catalytic nitrate reduction over Pd-Cu catalyst is sensitive to the bimetallic structures of the catalysts, and heterostructure bimetallic nanocrystals exhibit better catalytic performances on both the activity and selectivity, which may provide new insights into the design and optimization of catalysts to improve catalytic activity and selectivity for nitrate reduction in water.

Assuntos

RESUMO

Herein, three supported catalysts, CuO/Al2O3, CeO2/Al2O3, and CuO-CeO2/Al2O3, were synthesized by the convenient impregnation method to reveal the effect of CeO2 addition on catalytic performance and reaction mechanism for toluene oxidation. Compared with CuO/Al2O3, the T50 and T90 (the temperatures at 50% and 90% toluene conversion, respectively) of CuO-CeO2/Al2O3 were reduced by 33 and 39 °C, respectively. N2 adsorption-desorption experiment, XRD, SEM, EDS mapping, Raman, EPR, H2-TPR, O2-TPD, XPS, NH3-TPD, Toluene-TPD, and in-situ DRIFTS were conducted to characterize these catalysts. The excellent catalytic performance of CuO-CeO2/Al2O3 could be attributed to its strong copper-cerium interaction and high oxygen vacancies concentration. Moreover, in-situ DRIFTS proved that CuO-CeO2/Al2O3 promoted the conversion of toluene to benzoate and accelerated the deep degradation path of toluene. This work provided valuable insights into the development of efficient and economical catalysts for volatile organic compounds.

Assuntos

RESUMO

Oxygen activation leading to the generation of reactive oxygen species (ROS) is essential for photocatalytic environmental remediation. The limited efficiency of O2 adsorption and reductive activation significantly limits the production of ROS when employing C3N4 for the degradation of emerging pollutants. Doping with metal single atoms may lead to unsatisfactory efficiency, due to the recombination of photogenerated electron-hole pairs. Here, Mn and S single atoms were introduced into C3N4, resulting in the excellent photocatalytic performances. Mn/S-C3N4 achieved 100% removal of bisphenol A, with a rate constant 11 times that of pristine C3N4. According to the experimental results and theoretical simulations, S-atoms restrict holes, facilitating the photo-generated carriers' separation. Single-atom Mn acts as the O2 adsorption site, enhancing the adsorption and activation of O2, resulting the generation of ROS. This study presents a novel approach for developing highly effective photocatalysts that follows a new mechanism to eliminate organic pollutants from water.

Assuntos

RESUMO

Dissolved copper and iron ions are regarded as friendly and economic catalysts for peroxymonosulfate (PMS) activation, however, neither Cu(II) nor Fe(III) shows efficient catalytic performance because of the slow rates of Cu(II)/Cu(I) and Fe(III)/Fe(II) cycles. Innovatively, we observed a significant enhancement on the degradation of organic contaminants when Cu(II) and Fe(III) were coupled to activate PMS in borate (BA) buffer. The degradation efficiency of Rhodamine B (RhB, 20 µmol/L) reached up to 96.3% within 10 min, which was higher than the sum of individual Cu(II)- and Fe(III)- activated PMS process. Sulfate radical, hydroxyl radical and high-valent metal ions (i.e., Cu(III) and Fe(IV)) were identified as the working reactive species for RhB removal in Cu(II)/Fe(III)/PMS/BA system, while the last played a predominated role. The presence of BA dramatically facilitated the reduction of Cu(II) to Cu(I) via chelating with Cu(II) followed by Fe(III) reduction by Cu(I), resulting in enhanced PMS activation by Cu(I) and Fe(II) as well as accelerated generation of reactive species. Additionally, the strong buffering capacity of BA to stabilize the solution pH was satisfying for the pollutants degradation since a slightly alkaline environment favored the PMS activation by coupling Cu(II) and Fe(III). In a word, this work provides a brand-new insight into the outstanding PMS activation by homogeneous bimetals and an expanded application of iron-based advanced oxidation processes in alkaline conditions.

Assuntos

RESUMO

Monolithic catalysts with excellent O3 catalytic decomposition performance were prepared by in situ loading of Co-doped KMn8O16 on the surface of nickel foam. The triple-layer structure with Co-doped KMn8O16/Ni6MnO8/Ni foam was grown spontaneously on the surface of nickel foam by tuning the molar ratio of KMnO4 to Co(NO3)2·6H2O precursors. Importantly, the formed Ni6MnO8 structure between KMn8O16 and nickel foam during in situ synthesis process effectively protected nickel foam from further etching, which significantly enhanced the reaction stability of catalyst. The optimum amount of Co doping in KMn8O16 was available when the molar ratio of Mn to Co species in the precursor solution was 2:1. And the Mn2Co1 catalyst had abundant oxygen vacancies and excellent hydrophobicity, thus creating outstanding O3 decomposition activity. The O3 conversion under dry conditions and relative humidity of 65%, 90% over a period of 5 hr was 100%, 94% and 80% with the space velocity of 28,000 hr-1, respectively. The in situ constructed Co-doped KMn8O16/Ni foam catalyst showed the advantages of low price and gradual applicability of the preparation process, which provided an opportunity for the design of monolithic catalyst for O3 catalytic decomposition.

Assuntos

RESUMO

Developing cost-effective and high-performance catalyst systems for dry reforming of methane (DRM) is crucial for producing hydrogen (H2) sustainably. Herein, we investigate using iron (Fe) as a promoter and major alumina support in Ni-based catalysts to improve their DRM performance. The addition of iron as a promotor was found to add reducible iron species along with reducible NiO species, enhance the basicity and induce the deposition of oxidizable carbon. By incorporating 1 wt.% Fe into a 5Ni/10ZrAl catalyst, a higher CO2 interaction and formation of reducible "NiO-species having strong interaction with support" was observed, which led to an ∼80% H2 yield in 420 min of Time on Stream (TOS). Further increasing the Fe content to 2wt% led to the formation of additional reducible iron oxide species and a noticeable rise in H2 yield up to 84%. Despite the severe weight loss on Fe-promoted catalysts, high H2 yield was maintained due to the proper balance between the rate of CH4 decomposition and the rate of carbon deposit diffusion. Finally, incorporating 3 wt.% Fe into the 5Ni/10ZrAl catalyst resulted in the highest CO2 interaction, wide presence of reducible NiO-species, minimum graphitic deposit and an 87% H2 yield. Our findings suggest that iron-promoted zirconia-alumina-supported Ni catalysts can be a cheap and excellent catalytic system for H2 production via DRM.

Assuntos

RESUMO

Designing efficient and durable electrocatalysts for oxygen reduction reaction (ORR) is essential for proton exchange membrane fuel cells (PEMFCs). Platinum-based catalysts are considered efficient ORR catalysts due to their high activity. However, the degradation of Pt species leads to poor durability of catalysts, limiting their applications in PEMFCs. Herein, a Janus heterostructure is designed for high durability ORR in acidic media. The Janus heterostructure composes of crystalline platinum and cassiterite tin oxide nanoparticles with carbon support (J-Pt@SnO2/C). Based on the synchrotron fine structure analysis and electrochemical investigation, the crystalline reconstruction and charge redistribution at the interface of Janus structure are revealed. The tightly coupled interface could optimize the valance states of Pt and the adsorption/desorption of oxygenated intermediates. As a result, the J-Pt@SnO2/C catalyst possesses distinguishing long-term stability during the accelerated durability test without obvious degradation after 40 000 cycles and keeps the majority of activity after 70 000 cycles. Meanwhile, the catalyst exhibits outstanding activity with half-wave potential at 0.905 V and a mass activity of 0.355 A mgPt -1 (2.7 times higher than Pt/C). The approach of the Janus catalyst paves an avenue for designing highly efficient and stable Pt-based ORR catalyst in the future implementation.

RESUMO

In the present study, Rgo/Fe3O4/CdSe as a dark catalyst material was synthesized by a refluxing method. The synthesized magnetic nanocomposites were studied by various analyses such as Fourier transform infrared (FTIR), energy-dispersive X-ray spectroscopy (EDS), field emission scanning electron microscopy (FESEM), X-ray diffractometer (XRD), Raman, Zeta and vibrating sample magnetometer (VSM). Characterization of structural analysis showed that the nanocomposites were successfully synthesized. The absorption spectrum was used to determine the dark catalyst activity of rGO/Fe3O4/CdSe nanocomposite. Analysis of the absorption spectrum showed that the prepared nanocomposites degrade the MB organic dye completely (100%) after 2 min of stirring in the dark, also experimenting with different pH showed that the best performance for the degradation of MB occurs in neutral and alkaline media. The Raman spectrum analysis showed that the Fe3O4/CdSe quantum dots (QDs) were correctly incorporated on the reduced graphene oxide (rGO) nanosheets. Zeta potential analysis showed that rGO/Fe3O4/CdSe has a large amount of negative charge on its surface and the surface charge increased by about 16 mV compared to the Fe3O4/CdSe compound. BET and BJH techniques were used to determine the effective surface area and pore size diameter, BET results to determine the effective surface area showed that by adding graphene to the compound, the specific surface area increased from 42.877 m2g-1 to 54.1896 m2g-1. The radical scavenger experiment showed that electrons play an essential role in the degradation process. VSM analysis showed that the prepared nanocomposites have excellent superparamagnetic behavior, this advantage enables the easy collection of nanocatalysts by magnets from wastewater after dye degradation.

RESUMO

Metal sites at the edge of the carbon matrix possess unique geometric and electronic structures, exhibiting higher intrinsic activity than in-plane sites. However, creating single-atom catalysts with high-density edge sites remains challenging. Herein, the hierarchically ordered pore engineering of metal-organic framework-based materials to construct high-density edge-type single-atomic Ni sites for electrochemical CO2 reduction reaction (CO2RR) is reported. The created ordered macroporous structure can expose enriched edges, further increased by hollowing the pore walls, which overcomes the low edge percentage in the traditional microporous substrates. The prepared single-atomic Ni sites on the ordered macroporous carbon with ultra-thin hollow walls (Ni/H-OMC) exhibit Faraday efficiencies of CO above 90% in an ultra-wide potential window of 600 mV and a turnover frequency of 3.4 × 104 h-1, much superior than that of the microporous material with dominant plane-type sites. Theory calculations reveal that NiN4 sites at the edges have a significantly disrupted charge distribution, forming electron-rich Ni centers with enhanced adsorption ability with *COOH, thereby boosting CO2RR efficiency. Furthermore, a Zn-CO2 battery using the Ni/H-OMC cathode shows an unprecedentedly high power density of 15.9 mW cm-2 and maintains an exceptionally stable charge-discharge performance over 100 h.

RESUMO

Anode cell reversal typically leads to severe carbon corrosion and catalyst layer collapse, which significantly compromises the durability of proton exchange membrane fuel cells. Herein, three types of commercial carbon supports with various structures are facilely coated by polyaniline (PANI) and subsequently fabricated into reversal-tolerant anodes (RTAs). Consequently, the optimized PANI-coated catalyst RTAs demonstrate enhanced polarization performance and improved reversal tolerance compared to their uncoated counterparts, thus confirming the universality of this coating strategy. Essentially, the surface engineering introduced by PANI coating incorporates abundant N-groups and enhances coulombic interactions with ionomer side chains, which in turn reduces lower carbon exposure, promotes more uniform Pt deposition, and ensures better ionomer distribution. Accordingly, the membrane-electrode-assembly containing the Pt/PANI/XC-72R-1+IrO2 RTA presents a 100 mV (at 2500 mA cm-2) polarization performance improvement and 26-fold reduction in the degradation rate compared to the uncoated counterpart. This work provides a universal strategy for developing durable anodes and lays the groundwork for the practical fabrication of high-performance, low-degradation RTA.

RESUMO

Organocatalysis has become a powerful tool in synthetic chemistry, providing a cost-effective alternative to traditional catalytic methods. The immobilisation of organocatalysts offers the potential to increase catalyst reusability and efficiency in organic reactions. This article reviews the key parameters that influence the effectiveness of immobilised organocatalysts, including the type of support, immobilisation techniques and the resulting interactions. In addition, the influence of these factors on catalytic activity, selectivity and recyclability is discussed, providing an insight into optimising the performance of immobilised organocatalysts for practical applications in organic chemistry.

RESUMO

Decarboxylative alkylation of carboxylic acids with easily oxidizable functional groups such as phenol and indole functionalities was achieved using a catalytic amount of basic iron(III) acetate, Fe(OAc)2(OH), in the presence of benzimidazole under 427 nm LED irradiation. Kinetic analyses of this catalytic reaction revealed that the reaction rate is first-order in alkenes and is linearly correlated with the light intensity; the faster reaction rate for the benzimidazole-ligated species was consistent with the increased absorbance in the visible light region. Wide functional group tolerance for the easily oxidizable groups is ascribed to the weak oxidation ability of the in situ-generated oxo-bridged iron clusters compared with other iron(III) species.

RESUMO

This study focuses on the sustainable production of bio-jet fuel through the catalytic hydrodeoxygenation (HDO) of isoeugenol (IE). Properties of two spraying synthesis methods (in situ and ex situ metal doping) with different platinum (Pt) loading percentages. The catalyst was characterised using various techniques such as XAS, X-ray photoelectron spectroscopy, X-ray diffraction, high-resolution transmission electron microscopy (HRTEM), field-emission scanning electron microscopy (FESEM) and thermogravimetric analysis. The HRTEM and FESEM results show the successful preparation of a spherical nanoparticle doped over activated carbon, and Pt was dispersed on the outer shell of the particles. The catalytic HDO of IE showed a high yield and conversion as follows: IE conversion of 100%, liquid-phase mass balance of 95.92%, dihydroeugenol conversion of 99.32%, propylcyclohexane yield of 88.94% and HYD yield of 76.19%. Moreover, the catalyst exhibited high reusability with low metal leaching and high coke resistance for 10 cycles. The catalyst was evaluated in a continuous flow reactor for 100 h at different reaction temperatures, and interestingly, the catalyst showed low deactivation with a high half-time.

RESUMO

Photoswitchable (pre)catalysts, N,N'-bis-azobenzene-based (NHC)gold(I) and N,N'-bis-azobenzene-derived (NHC)copper(I) complexes are reported. Trans to cis isomerization of the attached photoswitchable moieties in the Au(I) complex enables four-fold decrement in the rate of oxazoline formation reaction. Whereas the progress of the copper(I) catalyzed, azide-alkyne cycloaddition reaction gets reduced by at least threefold. Alternate exposure to UV and blue light could easily toggle the rate of reactions remotely. The catalytic activity of thermodynamically stable trans-trans isomers is found to be similar to the common N-aryl substituted NHC-Au/Cu(I) complexes. NHC-Au(I) and -Cu(I) compounds bearing (trans)azobenzene moieties were characterized by X-ray diffraction. Photoswitching, recyclability studies, and the metastable isomer's thermal half-life in both complexes were studied via UV-visible spectroscopy. Whereas the extent of photoswitching and concomitant formation of geometrical isomers were investigated by using 1H-NMR spectroscopic study. Calculated percentage buried volumes of the three geometrical isomers show the trend trans-trans < trans-cis < cis-cis.

RESUMO

The gel skeletal reinforcement (GSR) method was applied at the preparation stage of ß-zeolite to prepare a novel hierarchical catalyst. A solution of hexamethyldisiloxane (HMDS) and acetic anhydride, a GSR reagent, was added to the mixture of colloidal silica, sodium aluminate, tetraethylammonium hydroxide, sodium hydroxide and water, and successive aging and hydrothermal treatment gave microporous ß-zeolite surrounded by mesoporous silica like core-shell structure. Its properties were characterized by XRD, nitrogen adsorption and desorption, NH3-TPD, TEM, and TG-DTA measurements, and further characteristics of the catalysts produced were clarified by the catalytic cracking of n-dodecane. The hierarchical structure of microporous zeolite and mesoporous silica was shown from GSR-2.9HS-H-Beta to GSR-3.2HS-H-Beta, where the molar ratio of HMDS and silica source of ß-zeolite was 2.9~3.2:100. It was found that in the catalytic cracking of n-dodecane, the relative activity (the conversion per the amount of zeolite crystals) increased with the increase in mesopore volume and surface area. The result indicated that the introduction of mesopores was effective even in catalytic cracking of small molecule of n-dodecane.

RESUMO

Single-cluster catalysts (SCCs) representing structurally well-defined metal clusters anchored on support tend to exhibit tunable catalytic performance for complex redox reactions in heterogeneous catalysis. Here we report a theoretical study on an SCC of Ru3@Mo2CO2 MXene for N2-to-NH3 thermal conversion. Our results show that Ru3@Mo2CO2 can effectively activate N2 and promotes its conversion to NH3 through an association mechanism, in which the rate-determining step of NH2* + H* → NH3* has a low energy barrier of 1.29 eV. Notably, with the assistance of Mo2CO2 support, the positively charged Ru3 cluster active site can effectively adsorb and activate N2, leading to 0.74 |e| charge transfer from Ru3@Mo2CO2 to the adsorbed N2. The supported Ru3 also acts as an electron reservoir to regulate the charge transfer for various intermediate steps of ammonia synthesis. Microkinetic analysis shows that the turnover frequency of the N2-to-NH3 conversion on Ru3@Mo2CO2 is as high as 1.45 × 10-2 s-1 site-1 at a selected thermodynamic condition of 48 bar and 700 K, the performance of which even surpasses that of the Ru B5 site and Fe3/θ-Al2O3(010) reported before. Our work provides a theoretical understanding of the high stability and catalytic mechanism of Ru3@Mo2CO2 and guidance for further designing and fabricating MXene-based metal SCCs for ammonia synthesis under mild conditions.

RESUMO

N2O and CO coexist in various industrial and mobile sources. The synergistic reaction of N2O and CO to generate N2 and CO2 has garnered significant research interest, but it remains extremely challenging. Herein, we constructed an atomically dispersed Rh-supported CeO2 catalyst with asymmetric Rh-O-Ce sites through gradient Rh 4d-O 2p-Ce 4f orbital coupling. This design effectively regulates the 4f electron states of Ce and promotes the electron filling of the O 3π* antibonding orbital to facilitate N-O bond cleavage. Near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS) reveals that CO reacts with the surface-adsorbed O* generated by N2O decomposition through self-tandem catalysis, accelerating the rate-limiting step in N2O decomposition and activating the synergistic reaction of N2O and CO at temperatures as low as 115 °C. This work can guide the development of high-performance catalysts using the strategy of high-order orbital hybridization combined with the tandem concept to achieve versatile catalytic applications.

RESUMO

Plastic pollution poses a pressing environmental challenge in modern society. Chemical catalytic conversion offers a promising solution for upgrading waste plastics into valuable liquid alkanes and other high value products. However, the current methods yield mixed products with a broad carbon distribution. To address this challenge, we introduce a tandem catalytic system that features matched acidic sites and confined metals for the conversion of low-density polyethylene (LDPE) into liquid alkanes. This system achieves a liquid alkane yield of 94.0%, with 84.8% of C5-C7 light alkanes. Combined with in situ FTIR and molecular dynamics simulation, the shape-selective mechanisms is elucidated, which ensures that only olefins of the appropriate size can diffuse to the encapsulated Pt sites within the zeolite for hydrogenation, resulting in an ultra-narrow product distribution. Furthermore, due to the rapid diffusion of olefins within the hierarchical zeolite, the catalyst exhibits higher catalytic efficiency and resistance to coking tendency. Our findings contribute to the design of efficient catalysts for plastic waste valorization.

RESUMO

Single-atom catalysts with maximal atom-utilization have emerged as promising alternatives for chlorine evolution reaction (CER) toward valuable Cl2 production. However, understanding their intrinsic CER activity have so far been plagued due to the lack of well-defined atomic structure controlling. Herein, we prepare and identify a series of atomically dispersed noble metals (e.g., Pt, Ir, Ru) in nitrogen-doped nanocarbons (M1-N-C) with an identical M-N4 moiety, which allows objective activity evaluation. Electrochemical experiments, operando Raman spectroscopy, and quasi-in situ electron paramagnetic resonance spectroscopy analyses collectively reveal that all the three M1-N-C proceed the CER via a direct Cl-mediated Vomer-Heyrovský mechanism with reactivity following the trend of Pt1-N-C > Ir1-N-C > Ru1-N-C. Density functional theory (DFT) calculations reveal that this activity trend is governed by the binding strength of Cl*-Cl intermediate (ΔGCl*-Cl) on M-N4 sites (Pt < Ir < Ru) featuring distinct d-band centers, providing a reliable thermodynamic descriptor for rational design of single metal sites toward Cl2 electrosynthesis.

RESUMO

In this study, novel chitosan/polyethylene oxide/Ti3C2Tx 2D MXene nanosheets (CS/PEO/Ti3C2Tx) nanofibers were successfully prepared by a continuous electrospinning process. During the electrospinning process, induced by the syringe tip capillary effects and electric field force, the Ti3C2Tx nanosheets were aligned along the direction of the nanofiber formation to occur a highly oriented structure. This well-ordered arrangement of the inorganic Ti3C2Tx nanosheets within the organic polymer matrix nanofiber was similar with nacre-like 'brick-and-motar' structure to some extent, resulting in a marked increase in thermal stability and mechanical properties of the resultant CS/PEO/Ti3C2Tx nanofiber. As 4 wt% of Ti3C2Tx nanosheets loaded, the highest tensile strength of the CS/PEO/Ti3C2Tx nanofiber mats was achieved as 31.7 MPa, about two times that of neat CS/PEO nanofibers. Uniformly dispersed Pd nanoparticles in size of about 1.6 nm have been successfully immobilized on the composite nanofiber with a solution impregnation process. With a loading as low as 0.2 mol% of Pd, the resultant Pd@CS/PEO/Ti3C2Tx composite nanofiber catalysts were highly active for both Heck and Sonogashira coupling reactions with broad reactants application scope, and could be recycled 15 runs without significant loss of activities.