RESUMO

Objetivos: avaliar o aumento ósseo com um biomaterial aloplástico no seio maxilar. Materiais e métodos: foram selecionados seis pacientes, totalizando nove seios maxilares, que realizaram cirurgia de reconstrução óssea em região posterior de maxila. Todas as cirurgias de elevação do seio maxilar traumáticas utilizaram o biomaterial sintético Straumann Bone Ceramic. Os pacientes realizaram uma tomografia pré-operatória, e uma após seis meses do ato cirúrgico, em que foram obtidas medidas lineares horizontais e verticais na imagem panorâmica da tomografia e medidas lineares horizontais e verticais no corte sagital da tomografia, ambas no centro das imagens. Resultados: identificou-se 100% de sucesso nas cirurgias de elevação de seio maxilar, em que verticalmente obteve-se diferença estatística significante (p < 0,05) e horizontalmente sem significância estatística (p > 0,05). Em média, obteve-se ganho vertical ósseo de 14,73 mm na imagem panorâmica e 16,05 mm no corte sagital, e espessura 20,82 mm na imagem panorâmica e 11,37 mm no corte sagital. Conclusão: o biomaterial sintético Straumann Bone Ceramic demonstrou-se excelente para a reconstrução de seios maxilares.

Objectives: to evaluate bone augmentation using an alloplastic material. Material and methods: six patients (9 maxillary sinuses) underwent surgical bone reconstruction at the posterior maxillary region. All surgeries were performed after atraumatic sinus membrane lifting and packing of Straumann BoneCeramic. Also, CBCTs were made at baseline and 6 months later to generate horizontal and vertical measurements at the panoramic and sagittal view modes both at the center of the images. Results: operative procedures were considered 100% successful. At the vertical dimension, statistical differences were obtained (p<0.05) but no significant differences were seen in the horizontal dimension (p>0.05). Overall, the vertical mean gain was 14.73mm at the panoramic and 16.05mm at the sagittal sections, being the observed thicknesses of 20.82mm and 11.37mm, respectively. Conclusion: the Straumann BoneCeramic biomaterial provided excellent results for maxillary sinus reconstructions.

Assuntos

RESUMO

PURPOSE: The aim of this paper was to study the healing of 1-1.4 mm wide buccal defects at implants placed immediately into extraction sockets (IPIES) filled with a mixture of synthetic hydroxyapatite (HA) 60% and beta-tricalciumphosphate (TCP) 40% or left with the clot alone and both covered with collagen membranes. MATERIAL AND METHODS: Eight Labrador dogs were used and implants were placed immediately into the extraction sockets of the first molar bilaterally. A mixture of synthetic HA 60% and beta-TCP 40% at the test or the clot alone at the control sites were used to fill the defects. All surgical sites were subsequently covered by a resorbable collagen membrane and a non-submerged healing was allowed. After 4 months, the animals were euthanized, biopsies harvested and processed for histomorphometric analysis. RESULTS: At the time of installation, residual buccal defects occurred that were 1.1 mm and 1.4 mm wide and 3 mm and 4 mm deep at the control and test sites, respectively. After 4 months of healing, the top of the bony crest and the coronal level of osseointegration were located respectively at 0.1 ± 1.8 mm and 1.5 ± 1.8 mm at the test, and 0.6 ± 1.6 mm and 1.2 ± 0.7 mm at the control sites apically to the implant shoulder. Bone-to-implant contact at the buccal aspect was 34.9 ± 25.9% and 36.4 ± 17.3% at the test and control sites, respectively. No statistically significant differences were found between test and control sites for any of the variables analyzed at the buccal aspects. CONCLUSIONS: The use of a mixture of synthetic HA 60% and beta-TCP 40% to fill residual buccal defects 1-1.4 mm wide at IPIES did not improve significantly the results of healing.

Assuntos

RESUMO

Objetivo: A proposta deste estudo foi avaliar a regeneração óssea de defeitos criados cirurgicamente e naturais circunferenciais (gap) de implantes pósexodônticos. Materiais e método: Para este estudo foram utilizados 8 cães da raça labrador, nos quais foram instalados implantes imediatos (pós-exodônticos) nos alvéolos dos dentes P2 (2o pré-molar) e M1 (1o molar) inferiores bilaterais. Nos implantes da região dos 2º pré-molares bilaterais foram criados cirurgicamente defeitos peri-implantares vestibulares que foram preenchidos de um lado por osso autógeno – OA e do outro por osso bovino inorgânico Bio-Oss®- OB. Nos alvéolos correspondentes aos primeiros molares (M1) os implantes foram instalados e os gaps (defeitos naturais) existente entre a tábua óssea vestibular e o implante, foram preenchidos por Bone Ceramic® - (grupo BC) ou somente coágulo (grupo COA). Todos os sítios cirúrgicos foram posteriormente recobertos por membrana de colágeno reabsorvível (Biogide ®) e mantidos com cicatrizador. Após 4 meses de pós-operatório, os animais foram eutanasiados e os blocos ósseos processados laboratorialmente para análise histomorfométrica. Resultados: Os resultados obtidos nos implantes instalados na região do P2 mostraram que os valores do IS-C foram ligeiramente maior (2.3±0.8mm) no grupo OA, comparado ao grupo OB (1.7± 0.7 mm), enquanto o IS-B dos grupos OA e OB foram respectivamente de 2.7±0.7mm e 2.2±1.0 mm no lado vestibular e de 1.6±0.8mm e 0.8±0.5mm no lado lingual. As médias dos valores de PM-C, PM-B e PM-IS no grupo OA e OB foram respectivamente de 4.3±0.9mm, 4.7±0.9mm, 2.0±1.6mm e 4.3±0.6mm, 4.8±0.6mm, 2.5±0.8mm. A diferença estatística significativa foi observada somente na espessura da crista óssea vestibular de 2 a 5 mm em direção ao IS (“pescoço do implante”), incluindo o biomaterial (S-OCbt) que se apresentou maior no grupo OB. Nos implantes instalados na região do M1, o gap vestibular horizontal foi de 1.1 (COA) e 1.4 mm (BC) e vertical de 3 e...

Objective: The purpose of these studies were to evaluate bone regeneration at natural or surgically-created buccal defects at implants placed immediately into extraction sockets (IPIES). Material and methods: Eight Labrador dogswere used and implants were placed immediately into the extraction sockets of P2 (second premolar) and M1 (first molar), bilaterally. At P2, the buccal wall of the extraction sockets was removed bilaterally to create a standardized defect, 4 mm wide coronally, 2 mm wide apically, and 6 mm height. At P2 sites, Bio-Oss at the test (OB) or autogenous bone at the control (OA) sites were used to fill the defects. At M1 sites, Bone Ceramic ® at the test (BC) or the clot alone (COA) were used to fill the defects. All surgical sites were subsequently covered by a resorbable collagen membraneand a non-submerged healing was allowed. After 4 months the animals were euthanized, bone blocks harvested and processed for histomorphometric analysis. Results: at P2 sites, IS- C values were slightly higher (2.3±0.8mm) in the OA compared to the OB (1.7±0.7 mm). IS- B were 2.7 ± 0.7mm and 2.2 ± 1.0mm on the buccal side and 1.6 ± 0.8mm and 0.8 ± 0.5mm on the lingual side at OA and OB groups, respectively. The average values of PM- C , B - PM and PM -IS in OA and OB groups were 4.3 ± 0.9mm , 4.7 ± 0.9mm , 2.0 ± 1.6mm and 4.3 ± 0.6mm , 4.8 ± 0.6mm , 2.5 ± 0.8mm, respectively. A statistically significant difference was only observed in the thickness of the buccal bony crest at 2-5 mm apically to IS (the implant neck) when the biomaterial (S -OCbt) was included in the measurement, which appeared to be higher in the OB group. At M1 sites, at the time of installation, the horizontal buccal gap was 1.1 at the COA and 1.4 mm at the BC sites while the vertical remaining defect was 3 mm and 4 mm deep in the control and test sites, respectively. At the buccal aspect, IS-C was higher in the COA (0.6 ± 1.6mm) compared to the BC (0.1 ± 1.8mm) groups and IS- B was...

Assuntos

RESUMO

Objetivo: A proposta deste estudo foi avaliar a regeneração óssea de defeitos criados cirurgicamente e naturais circunferenciais (gap) de implantes pósexodônticos. Materiais e método: Para este estudo foram utilizados 8 cães da raça labrador, nos quais foram instalados implantes imediatos (pós-exodônticos) nos alvéolos dos dentes P2 (2o pré-molar) e M1 (1o molar) inferiores bilaterais. Nos implantes da região dos 2º pré-molares bilaterais foram criados cirurgicamente defeitos peri-implantares vestibulares que foram preenchidos de um lado por osso autógeno – OA e do outro por osso bovino inorgânico Bio-Oss®- OB. Nos alvéolos correspondentes aos primeiros molares (M1) os implantes foram instalados e os gaps (defeitos naturais) existente entre a tábua óssea vestibular e o implante, foram preenchidos por Bone Ceramic® - (grupo BC) ou somente coágulo (grupo COA). Todos os sítios cirúrgicos foram posteriormente recobertos por membrana de colágeno reabsorvível (Biogide ®) e mantidos com cicatrizador. Após 4 meses de pós-operatório, os animais foram eutanasiados e os blocos ósseos processados laboratorialmente para análise histomorfométrica. Resultados: Os resultados obtidos nos implantes instalados na região do P2 mostraram que os valores do IS-C foram ligeiramente maior (2.3±0.8mm) no grupo OA, comparado ao grupo OB (1.7± 0.7 mm), enquanto o IS-B dos grupos OA e OB foram respectivamente de 2.7±0.7mm e 2.2±1.0 mm no lado vestibular e de 1.6±0.8mm e 0.8±0.5mm no lado lingual. As médias dos valores de PM-C, PM-B e PM-IS no grupo OA e OB foram respectivamente de 4.3±0.9mm, 4.7±0.9mm, 2.0±1.6mm e 4.3±0.6mm, 4.8±0.6mm, 2.5±0.8mm. A diferença estatística significativa foi observada somente na espessura da crista óssea vestibular de 2 a 5 mm em direção ao IS (“pescoço do implante”), incluindo o biomaterial (S-OCbt) que se apresentou maior no grupo OB. Nos implantes instalados na região do M1, o gap vestibular horizontal foi de 1.1 (COA) e 1.4 mm (BC) e vertical de 3 e...

Objective: The purpose of these studies were to evaluate bone regeneration at natural or surgically-created buccal defects at implants placed immediately into extraction sockets (IPIES). Material and methods: Eight Labrador dogswere used and implants were placed immediately into the extraction sockets of P2 (second premolar) and M1 (first molar), bilaterally. At P2, the buccal wall of the extraction sockets was removed bilaterally to create a standardized defect, 4 mm wide coronally, 2 mm wide apically, and 6 mm height. At P2 sites, Bio-Oss at the test (OB) or autogenous bone at the control (OA) sites were used to fill the defects. At M1 sites, Bone Ceramic ® at the test (BC) or the clot alone (COA) were used to fill the defects. All surgical sites were subsequently covered by a resorbable collagen membraneand a non-submerged healing was allowed. After 4 months the animals were euthanized, bone blocks harvested and processed for histomorphometric analysis. Results: at P2 sites, IS- C values were slightly higher (2.3±0.8mm) in the OA compared to the OB (1.7±0.7 mm). IS- B were 2.7 ± 0.7mm and 2.2 ± 1.0mm on the buccal side and 1.6 ± 0.8mm and 0.8 ± 0.5mm on the lingual side at OA and OB groups, respectively. The average values of PM- C , B - PM and PM -IS in OA and OB groups were 4.3 ± 0.9mm , 4.7 ± 0.9mm , 2.0 ± 1.6mm and 4.3 ± 0.6mm , 4.8 ± 0.6mm , 2.5 ± 0.8mm, respectively. A statistically significant difference was only observed in the thickness of the buccal bony crest at 2-5 mm apically to IS (the implant neck) when the biomaterial (S -OCbt) was included in the measurement, which appeared to be higher in the OB group. At M1 sites, at the time of installation, the horizontal buccal gap was 1.1 at the COA and 1.4 mm at the BC sites while the vertical remaining defect was 3 mm and 4 mm deep in the control and test sites, respectively. At the buccal aspect, IS-C was higher in the COA (0.6 ± 1.6mm) compared to the BC (0.1 ± 1.8mm) groups and IS- B was...

Assuntos