RESUMO
We report a method for remote excitation of the RF signal for preclinical-equivalent ultra high field Magnetic Resonance Imaging (MRI). A parallel-plate waveguide together with a bio-inspired surface coil were used to perform remote excitation experiments to acquire images with a small-bore MR imager at 15.2 T. The imager bore size limits the RF coil transmitter dimensions, so the Gielis super-formula was used to design an RF coil with small dimensions. Electromagnetic simulations of the principal mode were run to study the waveguide filled with air and loaded with a saline solution-filled tube. Radiation patterns were also computed in a semi-anechoic chamber for the same scenarios as above. A saline solution-filled spherical phantom and a formaldehyde-fixed mouse phantom were used to acquire images. Radiation patterns showed an omnidirectional distribution with no side lobes, and a very smooth behaviour with almost no loss of information in the saline solution-filled tube and without. The theoretical wave impedance was calculated and compared with simulated results showing an excellent correspondence. Spherical phantom image data and simulation results of B1 were contrasted and showed an important correlation. Ex vivo mouse images were of high quality and exhibited clear delineation of anatomical structures. These imaging results are in very good agreement with the simulations. Numerical, theoretical and experimental results validate this approach, using a bio-inspired surface coil with a simple waveguide for preclinical small-bore MRI at ultra high field.