RESUMO

Resumen Introducción : La nefropatía membranosa (NM) es la causa más frecuente de síndrome nefrótico primario en adultos (20-30%). En la microscopia óptica se obser va engrosamiento de membrana basal glomerular con aparición de espigas. Estos hallazgos histológicos no son evidentes en formas tempranas, en cuyo caso el patrón de depósito granular de IgG y/o C3 en la membrana basal por inmunofluorescencia (IF) permite diferenciarla de enfermedad por cambios mínimos (ECM). El sistema del complemento juega un papel central en la fisiopatología de la NM. C4d es producto de degradación y un marcador de la activación del complemento. La marcación con C4d en muestras de biopsias re nales, por técnica de inmunohistoquímica (IH) puede colaborar en el diagnóstico diferencial entre ambas glomerulopatías. Nuestro objetivo fue explorar el poder de discriminación del C4d para diferenciar NM de ECM en material de biopsias renales. Métodos : Se recuperaron muestras en parafina de biopsias renales con diagnóstico de NM y ECM realizados entre 1/1/2008 y 1/4/2019. Se realizaron tinciones de IH por técnica de inmunoperoxidasa con C4d usando un anticuerpo policlonal antihumano de conejo. Resultados : En todos los casos con NM (n = 27, 15 hombres) con mediana de edad de 63 (rango: 18-86) años se detectaron depósitos de C4d. En los 21 casos con ECM (12 hombres) con mediana de edad de 51 (rango: 18-87) años la marcación de C4d fue negativa. Conclusión : Los resultados indican que la marcación de la biopsia renal con C4d es una herramienta útil para el diagnóstico diferencial entre NM y ECM.

Abstract Introduction : Membranous nephropathy (MN) is the most common cause of primary nephrotic syndrome in adults (20-30%). Light microscopy shows thickening of glomerular basement membrane with appearance of spikes. These histological findings are not evident in early forms, in which case the granular deposition pattern of IgG and/or C3 in the basement membrane by immunofluorescence (IF) constitutes the diagnostic tool that allows to differentiate it from minimal change disease (MCD). Complement system plays a key role in the pathophysiology of MN. C4d is a degradation prod uct and a marker of the complement system activation. C4d labelling by immunohistochemical (HI) technique can help in the differential diagnosis between both glomerulopathies NM and MCD when the material for IF is insufficient and light microscopy is normal. Our objective was to explore the discrimination power of C4d to differentiate between MN and MCD in renal biopsy material. Methods : Paraffin-embedded samples were recovered from renal biopsies with a diagnosis of MN and MCD performed between 1/1/2008 and 4/1/2019. IH staining was performed by immunoperoxidase technique using a rabbit anti-human C4d polyclonal antibody. Results : In all cases with MN (n = 27, 15 males) with a median age of 63 (range: 18-87) years, C4d deposits were detected. In 21 cases with MCD (12 males) with a median age of 51 (range: 18-87) years, the C4d marking was negative in every samples. Conclusion : The results indicate that the marking of the renal biopsy with C4d is a useful tool for the dif ferential diagnosis between NM and MCD.

RESUMO

Following consumer trends and market needs, the food industry has expanded the use of unconventional sources to obtain proteins. In parallel, 3D and 4D food printing have emerged with the potential to enhance food processing. While 3D and 4D printing technologies show promising prospects for improving the performance and applicability of unconventional sourced proteins (USP) in food, this combination remains relatively unexplored. This review aims to provide an overview of the application of USP in 3D and 4D printing, focusing on their primary sources, composition, rheological, and technical-functional properties. The drawbacks, challenges, potentialities, and prospects of these technologies in food processing are also examined. This review underscores the current necessity for greater regulation of food products processed by 3D and 4D printing. The data presented here indicate that 3D and 4D printing represent viable, sustainable, and innovative alternatives for the food industry, emphasizing the potential for further exploration of 4D printing in food processing. Additional studies are warranted to explore their application with unconventional proteins.

Assuntos

RESUMO

INTRODUCTION: Membranous nephropathy (MN) is the most common cause of primary nephrotic syndrome in adults (20-30%). Light microscopy shows thickening of glomerular basement membrane with appearance of spikes. These histological findings are not evident in early forms, in which case the granular deposition pattern of IgG and/or C3 in the basement membrane by immunofluorescence (IF) constitutes the diagnostic tool that allows to differentiate it from minimal change disease (MCD). Complement system plays a key role in the pathophysiology of MN. C4d is a degradation product and a marker of the complement system activation. C4d labelling by immunohistochemical (HI) technique can help in the differential diagnosis between both glomerulopathies NM and MCD when the material for IF is insufficient and light microscopy is normal. Our objective was to explore the discrimination power of C4d to differentiate between MN and MCD in renal biopsy material. METHODS: Paraffin-embedded samples were recovered from renal biopsies with a diagnosis of MN and MCD performed between 1/1/2008 and 4/1/2019. IH staining was performed by immunoperoxidase technique using a rabbit anti-human C4d polyclonal antibody. RESULTS: In all cases with MN (n = 27, 15 males) with a median age of 63 (range: 18-87) years, C4d deposits were detected. In 21 cases with MCD (12 males) with a median age of 51 (range: 18-87) years, the C4d marking was negative in every samples. CONCLUSION: The results indicate that the marking of the renal biopsy with C4d is a useful tool for the differential diagnosis between NM and MCD.

Introducción: La nefropatía membranosa (NM) es la causa más frecuente de síndrome nefrótico primario en adultos (20-30%). En la microscopia óptica se observa engrosamiento de membrana basal glomerular con aparición de espigas. Estos hallazgos histológicos no son evidentes en formas tempranas, en cuyo caso el patrón de depósito granular de IgG y/o C3 en la membrana basal por inmunofluorescencia (IF) permite diferenciarla de enfermedad por cambios mínimos (ECM). El sistema del complemento juega un papel central en la fisiopatología de la NM. C4d es producto de degradación y un marcador de la activación del complemento. La marcación con C4d en muestras de biopsias renales, por técnica de inmunohistoquímica (IH) puede colaborar en el diagnóstico diferencial entre ambas glomerulopatías. Nuestro objetivo fue explorar el poder de discriminación del C4d para diferenciar NM de ECM en material de biopsias renales. Métodos: Se recuperaron muestras en parafina de biopsias renales con diagnóstico de NM y ECM realizados entre 1/1/2008 y 1/4/2019. Se realizaron tinciones de IH por técnica de inmunoperoxidasa con C4d usando un anticuerpo policlonal antihumano de conejo. Resultados: En todos los casos con NM (n = 27, 15 hombres) con mediana de edad de 63 (rango: 18-86) años se detectaron depósitos de C4d. En los 21 casos con ECM (12 hombres) con mediana de edad de 51 (rango: 18-87) años la marcación de C4d fue negativa. Conclusión: Los resultados indican que la marcación de la biopsia renal con C4d es una herramienta útil para el diagnóstico diferencial entre NM y ECM.

Assuntos

RESUMO

BACKGROUND: There is a little information about of expression of C4d (complement fragment) in Focal segmental glomerulosclerosis (FSGS) subtypes. Our aim was to determine the expression of C4d in FSGS subtypes in percutaneous native renal biopsies in a second-level hospital and its correlation with clinical, biochemical and histological variables. MATERIAL AND METHODS: A retrospective study in paraffin blocks of patients with biopsy with FSGS aged 16-65 years, indistinct sex, not diabetic or obese. Immunohistochemistry was performed for C4d and their expression was analyzing in non-sclerosed glomerular capillaries (GC) and sclerosis areas (SA). Clinical and biochemical variables were recorded. The cases were divided into C4d positive and C4d negative groups and compared. The correlation between C4d staining scores in CG and SA with clinical and biochemical variables were analyzed. RESULTS: Twenty samples were analyzed, 4 for each subtype. At the time of biopsy average age 38.8 ±â€¯18.6 years, 65% male, 8.7% were hypertension. The percentage of positivity for C4d was 40% in GC, 30% SA and 35% in mesangium. The highest expression was for cellular and collapsing subtypes. C4d positivity cases had increased proteinuria (p = 0.035). A significant correlation was found between percentage of C4d expression in CG with SA (p = 0.012) and SA with tubular atrophy and interstitial fibrosis (p < 0.05). CONCLUSIONS: C4d expression in FSGS predominated in the cellular and collapsing subtypes, which translates complement activation. C4d is a possible surrogate marker in GSFS.

Assuntos

RESUMO

2,4-Dichlorophenoxyacetic acid (2,4-D) is an herbicide and is among the most widely distributed pollutant in the environment and wastewater. Herein is presented a complete comparison of adsorption performance between two different magnetic carbon nanomaterials: graphene oxide (GO) and its reduced form (rGO). Magnetic functionalization was performed employing a coprecipitation method, using only one source of Fe2+, requiring low energy, and potentially allowing the control of the amount of incorporated magnetite. For the first time in literature, a green reduction approach for GO with and without Fe3O4, maintaining the magnetic behavior after the reaction, and an adsorption performance comparison between both carbon nanomaterials are demonstrated. The nanoadsorbents were characterized by FTIR, XRD, Raman, VSM, XPS, and SEM analyses, which demonstrates the successful synthesis of graphene derivate, with different amounts of incorporate magnetite, resulting in distinct magnetization values. The reduction was confirmed by XPS and FTIR techniques. The type of adsorbent reveals that the amount of magnetite on nanomaterial surfaces has significant influence on adsorption capacity and removal efficiency. The procedure demonstrated that the best performance, for magnetic nanocomposites, was obtained by GO∙Fe3O4 1:1 and rGO∙Fe3O4 1:1, presenting values of removal percentage of 70.49 and 91.19%, respectively. The highest adsorption capacity was reached at pH 2.0 for GO∙Fe3O4 1:1 (69.98 mg g-1) and rGO∙Fe3O4 1:1 (89.27 mg g-1), through different interactions: π-π, cation-π, and hydrogen bonds. The adsorption phenomenon exhibited a high dependence on pH, initial concentration of adsorbate, and coexisting ions. Sips and PSO models demonstrate the best adjustment for experimental data, suggesting a heterogeneous surface and different energy sites, respectively. The thermodynamic parameters showed that the process was spontaneous and exothermic. Finally, the nanoadsorbents demonstrated a high efficiency in 2,4-D adsorption even after five adsorption/desorption cycles.

Assuntos

RESUMO

Additive Manufacturing (AM) has recently demonstrated significant medical progress. Due to advancements in materials and methodologies, various processes have been developed to cater to the medical sector's requirements, including bioprinting and 4D, 5D, and 6D printing. However, only a few studies have captured these emerging trends and their medical applications. Therefore, this overview presents an analysis of the advancements and achievements obtained in AM for the medical industry, focusing on the principal trends identified in the annual report of AM3DP.

RESUMO

Technological advances and the development of new and advanced materials allow the transition from three-dimensional (3D) printing to the innovation of four-dimensional (4D) printing. 3D printing is the process of precisely creating objects with complex shapes by depositing superimposed layers of material. Current 3D printing technology allows two or more filaments of different polymeric materials to be placed, which, together with the development of intelligent materials that change shape over time or under the action of an external stimulus, allow us to innovate and move toward an emerging area of research, innovative 4D printing technology. 4D printing makes it possible to manufacture actuators and sensors for various technological applications. Its most significant development is currently in the manufacture of intelligent textiles. The potential of 4D printing lies in modular manufacturing, where fabric-printed material interaction enables the creation of bio-inspired and biomimetic devices. The central part of this review summarizes the effect of the primary external stimuli on 4D textile materials, followed by the leading applications. Shape memory polymers attract current and potential opportunities in the textile industry to develop smart clothing for protection against extreme environments, auxiliary prostheses, smart splints or orthoses to assist the muscles in their medical recovery, and comfort devices. In the future, intelligent textiles will perform much more demanding roles, thus envisioning the application fields of 4D printing in the next decade.

RESUMO

The aim of the present study was to assess the selectivity of herbicides applied in the pre and post-planting of pre-sprouted seedlings (PSS). The experiment was conducted in a greenhouse, using a completely randomized design, with nine treatments and four repetitions. The IACSP95-5000 cultivar was used. The treatments consisted of herbicides applied in five doses as follows: in pre-planting: sulfentrazone, diclosulam, imazapic, and imazapyr, in post-planting: ethoxysulfuron, halosulfuron, 2,4-D and MSMA, and a control treatment without herbicide. Injury symptoms were assessed at 7, 15, 30, 45, 60, 75, and 90 days after application (DAA), height, diameter, number of tillers, chlorophyll A, B, and total chlorophyll at 30, 60, and 90 DAA, leaf area, shoot and root dry mass at 90 DAA. The post-emergent herbicides were considered selective. Pre-planting herbicides reduced the variables assessed at 90 DAA, observed by linear regression for diclosulam and imazapic, and exponential regression for imazapyr. Treatments with sulfentrazone caused few injury symptoms, with subsequent recovery. In addition, all the variables analyzed were equal to control, with the sulfentrazone considered selective for the IACSP95-5000 cultivar.

Assuntos

RESUMO

The association of scanning transmission electron microscopy (STEM) and detection of a diffraction pattern at each probe position (so-called 4D-STEM) represents one of the most promising approaches to analyze structural properties of materials with nanometric resolution and low irradiation levels. This is widely used for texture analysis of materials using automated crystal orientation mapping (ACOM). Herein, we perform orientation mapping in InP nanowires exploiting precession electron diffraction (PED) patterns acquired by an axial CMOS camera. Crystal orientation is determined at each probe position by the quantitative analysis of diffracted intensities minimizing a residue comparing experiments and simulations in analogy to x-ray structural refinement. Our simulations are based on the two-beam dynamical diffraction approximation and yield a high angular precision (∼0.03°), much lower than the traditional ACOM based on pattern matching algorithms (∼1°). We anticipate that simultaneous exploration of both spot positions and high precision crystal misorientation will allow the exploration of the whole potentiality provided by PED-based 4D-STEM for the characterization of deformation fields in nanomaterials.

RESUMO

BACKGROUND: Pesticide exposure may affect young children's neurodevelopment, but only few cohort studies have addressed possible effects of non-organophosphate pesticides. OBJECTIVE: We evaluated associations between prenatal current-use pesticide exposure and neurodevelopmental outcomes among 1-year-old children from the Infants' Environmental Health (ISA) birth cohort. METHODS: To determine prenatal pesticide exposure, we measured biomarkers of pyrimethanil, chlorpyrifos, synthetic pyrethroids, and 2,4-D in urine samples among 355 women, 1-3 times during pregnancy. One-year post-partum, we evaluated children's neurodevelopment with the Bayley Scales of Infant and Toddler Development 3rd edition (BSID-III). We assessed associations between exposures and neurodevelopmental outcomes (composite and z-scores) using single-chemical linear regression models adjusted for possible confounders (maternal education, parity, sex, gestational age at birth, child age, HOME-score, location of assessment, biomarkers of mancozeb), and studied effect-modification by sex. We evaluated non-linear associations of multiple pesticide exposures with Bayesian kernel machine regression (BKMR). RESULTS: We found higher prenatal urinary 2,4-D concentrations were associated with lower language (ßper ten-fold increase = -2.0, 95 % confidence interval (CI) = -3.5, -0.5) and motor (ßper ten-fold increase = -2.2, 95 %CI = -4.2, -0.1) composite scores among all children. Also, higher chlorpyrifos exposure [measured as urinary 3,5,6-trichloro-2-pyridinol (TCPy)] was associated with lower cognitive composite scores (ßper ten-fold increase = -1.9, 95 %CI = -4.7, 0.8), and lower motor composite scores among boys (ßper ten-fold increase = -3.8, 95 % CI = -7.7, 0.1) but not girls (ßper ten-fold increase = 2.3, 95 %CI = -1.6, 6.3, pINT = 0.11). Finally, higher pyrimethanil was associated with lower language abilities among girls, but not boys. Pyrethroid metabolite concentrations did not explain variability in BSID-III composite scores. Associations were similar for BSID-III z-scores, and we found no evidence for non-linear associations or mixture effects. DISCUSSION: Prenatal exposure to common-use pesticides may affect children's neurodevelopment at 1-year of age, some effects may be sex-specific.

Assuntos

RESUMO

The consumption of Western diet (WD) - enriched in fats and sugars - is associated with overweight, obesity and male reproductive disorders. In addition to WD intake, crops and dairy products display residues of herbicides, including glyphosate and 2,4-D that are widely applied worldwide. The concomitant exposure to WD and herbicides - mimicking contemporary scenarios - is not fully investigated. Thus, we evaluated the effects of glyphosate and 2,4-D, alone or in mixture, on WD-induced alterations in the male genital system. Male C57BL6J mice were submitted to WD (chow containing 20% lard, 0.2% cholesterol, 20% sucrose, and high sugar solution with 23.1 and 18.9 g/L of D-fructose and D-glucose) for 6 months. Concomitantly to WD, the animals received glyphosate (0.05, 5, or 50 mg/kg/day), 2,4-D (0.02, 2 or 20 mg/kg/day) or their mixture (0, 05 + 0.02, 5 + 2, or 50 + 20 mg/kg/day) by intragastrical administration (5×/week). Doses were based on Acceptable Daily Intake (ADIs) or No Observed Adverse Effect Level (NOAEL) values. Herbicide exposure did not alter the WD-induced obesity, hypercholesterolemia and hyperglycemia. WD induced sperm cell abnormalities, reduced the number, volume and area of Leydig cells, enhanced the frequency of epididymal abnormalities, decreased the proliferation in both germinal and epididymal epithelia, and reduced the number of androgen receptor (AR) positive epididymal cells. Remarkably, the herbicide mixtures promoted such WD-induced effects: increased the frequency of sperm cell and epididymal abnormalities (absence of sperm, cytoplasmic vacuoles, and clear cell hypertrophy) (5 + 2 and 50 + 20 doses); decreased Leydig cell nuclei volume and area (5 + 2 and 50 + 20 doses), reduced epididymal cell proliferation (all mixtures), and AR expression (50 + 20 dose). In addition, herbicide mixtures reduced serum testosterone levels (5 + 2 and 50 + 20 doses). Our findings indicate that the mixture of glyphosate and 2,4-D herbicides, mimicking environmentally relevant scenarios, promotes WD-induced changes in the male genital system.

Assuntos

RESUMO

Aim: The assessment of the antileishmanial potential of 22 vanillin-containing 1,2,3-triazole derivatives against Leishmania braziliensis is reported. Materials & methods: Initial screening was performed against the parasite promastigote form. The most active compound, 4b, targeted parasites within amastigotes (IC50 = 4.2 ± 1.0 µmol l-1), presenting low cytotoxicity and a selective index value of 39. 4D quantitative structure-activity relationship and molecular docking studies provided insights into structure-activity and biological effects. Conclusion: A vanillin derivative with significant antileishmanial activity was identified. Enhanced activity was linked to increased electrostatic and Van der Waals interactions near the benzyl ring of the derivatives. Molecular docking indicated the inhibition of the Leishmania amazonensis sterol 14α-demethylase, using Leishmania infantum sterol 14α-demethylase as a model, without affecting the human isoform. Inhibition was active site competition with lanosterol.

Assuntos

RESUMO

Additive manufacturing, widely known as 3D printing, has revolutionized the production of biomaterials. While conventional 3D-printed structures are perceived as static, 4D printing introduces the ability to fabricate materials capable of self-transforming their configuration or function over time in response to external stimuli such as temperature, light, or electric field. This transformative technology has garnered significant attention in the field of biomedical engineering due to its potential to address limitations associated with traditional therapies. Here, we delve into an in-depth review of 4D-printing systems, exploring their diverse biomedical applications and meticulously evaluating their advantages and disadvantages. We emphasize the novelty of this review paper by highlighting the latest advancements and emerging trends in 4D-printing technology, particularly in the context of biomedical applications.

RESUMO

In this study, we investigate the toxicity of commercial formulations based on glyphosate, 2,4-D, imidacloprid, and iprodione, in isolation and mixed, on Allium cepa. The mixtures consisted of combinations in the lowest (M1), intermediate (M2), and highest concentrations (M3) of each pesticide. We measured physiological (germination rate, germination speed, and radicular length) and cyto-genotoxic (mitotic index and frequency of aberrant cells) parameters. In addition, we analyzed the cell cycle progression and cell death induction by flow cytometry. When applied in isolation, the pesticides changed the parameters evaluated. M1 and M2 inhibited root length and increased the frequency of aberrant cells. Their genotoxic effect was equivalent to that of pesticides applied in isolation. Furthermore, M1 and M2 caused cell death and M2 changed the cell cycle progression. M3 had the greatest deleterious effect on A. cepa. This mixture inhibited root length and promoted an additive or synergistic effect on the mitotic index. In addition, M3 changed all parameters analyzed by flow cytometry. This research clearly demonstrates that the pesticides tested, and their mixtures, may pose a risk to non-target organisms.

Assuntos

RESUMO

Grain cultivation and its impacts on the environment have been the focus of many studies, especially due to generated solid waste and the wide use of agrochemicals aiming for greater productivity. In this context, the present study proposes a new and consistent step in constructing self-sustainability in rice farming. The proposed stage includes reusing green silica waste as an adsorbent to treat effluents contaminated by pesticides directly applied to rice cultivation. After nano silica production through the rice husks burning, followed by basic leaching and acid precipitation, a carbonaceous material remains. This material, naturally impregnated by Na2SiO3, was washed and dried, characterized, and used to remove the pesticide 2,4-dichlorophenoxyacetic acid (2,4-D). The adsorption essays were performed at 2,4-D at low concentrations (between 1 and 10 mg L-1) at different temperatures. The washed and dried porous carbon (WDPC) surface is irregular and presents slit-shaped channels. The FT-IR analysis identified the siloxane, carbonyl, carboxylate, and methylene functional groups available to interact with the pesticide molecules. The washing/drying process eliminated impurities, improving the surface area from 539.67 to 619.67 cm2 g-1 and pore volume from 0.29 to 0.44 cm3 g-1. Concerning the adsorption of 2,4-D on WDPC, the best pH was 6.0, where around 75% of the pesticide was removed from the water. The equilibrium isotherms presented an S-shaped form indicating a multilayer and cooperative adsorption, with maximum adsorption capacities of 7.504 and 7.736 mg g-1. The estimated ∆Gads, ΔHads, and ΔSads values suggested that pesticide adsorption was spontaneous, exothermic, and favorable. Finally, WDPC demonstrated a good potential to uptake 2,4-D from water, contributing to self-sustainability in rice farming.

RESUMO

PDE4D (Phosphodiesterase 4D) gene encodes a hydrolase of cyclic AMP. PDE4D genetic variants have been associated with asthma susceptibility. Therefore, this study aimed to investigate the association between PDE4D variants (and haplotypes) with asthma and atopy in a Brazilian population. The study comprised 1,246 unrelated participants from the SCAALA (Social Changes Asthma and Allergy in Latin America) program. Genotyping was performed using the Illumina 2.5 Human Omni bead chip. Multivariate logistic regression was used to investigate the association between PDE4D variants and asthma/atopy phenotypes in PLINK 1.09 software. Twenty-four SNVs in PDE4D were associated with atopy or asthma. The rs6898082 (A) variant increased asthma susceptibility (OR 2.76; CI 99% 1.26-6.03) and was also related to a greater PDE4D expression in the GTEx database. Also, the variant rs6870632 was further associated with asthma in meta-analysis with a replication cohort. In addition, the variants rs75699812 (C), rs8007656 (G), and rs958851 (T) were positively associated with atopy. Moreover, these variants formed an atopy risk haplotype (OR 1.82; CI 99% 1.15-2.88). Also, these variants were related to lower levels of IL-10. Functional in silico assessment showed that some PDE4D SNVs may have an impact on gene regulation and expression. Variants in the PDE4D are positively associated with asthma and allergy markers. It is possible that these variants lead to alteration in PDE4D expression and therefore impact immunity and pulmonary function.

Assuntos

RESUMO

OBJECTIVE: Semaphorin 4D (Sema4D) is a coupling factor expressed on osteoclasts that may hinder osteoblast differentiation. Since the leukocyte platelet-rich fibrin (L-PRF) membrane promotes growth factor concentration, this study aims to quantify the amount of Sema4D in L-PRF membranes, and analyze the impact of Sema4D on osteoblast cell function in vitro. DESIGN: Enzyme-linked immunosorbent assay (ELISA) was used to quantify the levels of Sema4D in both L-PRF and whole blood (serum). To analyze the impairment of Sema4D on osteoblasts, MC3T3-E1 cells were induced to osteogenic differentiation and exposed to Sema4D ranging from 10 to 500 ng/ml concentrations. The following parameters were assayed: 1) cell viability by MTT assay after 24, 48, and 72 h; 2) matrix mineralization by Alizarin Red staining after 14 days, 3) Runt-related transcription factor 2 (RUNX-2), osteocalcin (OCN), osteonectin (ONC), bone sialoprotein (BSP) and alkaline phosphatase (ALP) gene expression by qPCR. For all data, the significance level was set at 5%. RESULTS: The amount of Sema4D in the whole blood (serum) was higher than in L-PRF. Osteoblasts exposed to Sema4D at all tested concentrations exhibited a decrease in matrix mineralization formation as well in RUNX-2, OCN, ONC, BSP, and ALP gene expression (p < 0.05). CONCLUSION: The presence of Sema4D, a molecule known for suppressing osteoblast activity, diminishes within L-PRF, enhancing its ability to facilitate bone regeneration.

Assuntos

RESUMO

SUMMARY: This study investigates the relationship between the second and fourth finger ratio (2D:4D), physicians' propensity to choose an internal or surgical branch, and sex differences. On a voluntary basis, 177 physicians working in Elazig, 122 men and 55 women were enrolled in the study. Their hands were measured for 2D and 4D lengths, and the 2D:4D ratio was computed. In female doctors, the left hand's 2D:4D ratio is 1.01, compared to the right hand's 1.00. Male doctors' right 2D:4D ratio is 0.99, while their left 2D:4D ratio is 1.00. Male physicians' 2D:4D ratios were different from those of men in the general population, whereas female physicians' 2D:4D ratios were comparable to those of women in the general population. As a result, this study was the first to examine the relationship between the ratio of the second and fourth fingers (2D:4D), physicians' tendency to choose an internal medicine or surgical branch, and sex differences. While the 2D:4D ratio was higher than 0.98 in all physicians, it was low in women who disliked their profession and branch. Since there aren't many studies on this subject, data from in-depth studies that will be conducted in the future will help physicians who choose internal medicine and surgery make more informed decisions.

Este estudio investiga la relación entre la proporción de los dedos segundo y cuarto (2D:4D), la propensión de los médicos a elegir una rama interna o quirúrgica y las diferencias de género. De forma voluntaria, se inscribieron en el estudio 177 médicos que trabajaban en Elazig, 122 hombres y 55 mujeres. Sus manos se midieron en longitudes 2D y 4D, y se calculó la relación 2D:4D. En las médicos mujeres, la relación 2D:4D de la mano izquierda es 1,01, en comparación con 1,00 de la mano derecha. La relación 2D:4D derecha de los médicos hombres fue 0,99, mientras que la relación 2D:4D izquierda fye 1,00. Las proporciones 2D:4D de los médicos hombres fueron diferentes de las de los hombres en la población general, mientras que las proporciones 2D:4D de las mujeres médicas fueron comparables a las de las mujeres en la población general. Como resultado, este estudio fue el primero en examinar la relación entre la proporción del segundo y cuarto dedo (2D:4D), la tendencia de los médicos a elegir una rama de medicina interna o quirúrgica y las diferencias de sexo. Mientras que la relación 2D:4D fue superior a 0,98 en todos los médicos, fue baja en las mujeres que no les gustaba su profesión y rama. Dado que no hay muchos estudios sobre este tema, los datos de estudios en profundidad que se realizarán en el futuro ayudarán a los médicos que eligen medicina interna y cirugía a tomar decisiones más informadas.

Assuntos

RESUMO

Western diet (WD), abundant in saturated fats and simple carbohydrates, has been associated with the development of prostate diseases. In addition, 2,4-dichlorophenoxyacetic acid (2,4-D), an herbicide used in agricultural and non-agricultural settings, may interfere with the endocrine system impacting reproductive health. The association of both factors is something common in everyday life, however, there are no relevant studies associating them as possible modulators of prostatic diseases. This study evaluated the action of the herbicide 2,4-D on the postnatal development of the prostate in mice fed with WD. Male C57Bl/6J mice received simultaneously a WD and 2,4-D at doses of 0.02, 2.0, or 20.0 mg/kg b.w./day for 6 months. The prolongated WD intake induced obesity and glucose intolerance, increasing body weight and fat. WD induced morphological changes and increased PCNA-positive epithelial cells in prostate. Additionally, the WD increased gene expression of AR, antioxidant targets, inflammation-related cytokines, cell repair and turnover, and targets related to methylation and miRNAs biosynthesis compared to the counterpart (basal diet). 2,4-D (0.02 and 2.0) changed prostate morphology and gene expression evoked by WD. In contrast, the WD group exposed to 20 mg/kg of 2,4-D reduced feed intake and body weight, and increased expression of androgen receptor and genes related to cell repair and DNA methylation compared to the negative control. Our results showed that 2,4-D was able to modulate the effects caused by WD, mainly at lower doses. However, further studies are needed to elucidate the mechanisms of 2,4-D on the obesogenic environment caused by the WD.

Assuntos

RESUMO

BACKGROUND: Transgenic event DAS44406-6 (E3) makes soybeans that are herbicide [glyphosate (Gly), 2,4-dichlorophenoxyacetic acid (2,4-D) and glufosinate] and caterpillar resistant. The E3 soybean was commercially released for the 2021/2022 harvest in Brazil. We conducted this study to test whether Gly and 2,4-D applied alone and in a commercial mixture affect Asian soybean rust (ASR). Assays were conducted in detached leaves and in vivo, in a controlled environment using the herbicides Gly, 2,4-D and Gly + 2,4-D, and pathogen inoculation. Disease severity and spore production were evaluated. RESULTS: Only the herbicides Gly and Gly + 2,4-D inhibited ASR in detached leaves and in vivo. When applied preventively and curatively in vivo, these herbicides reduced the disease severity and spore production of the fungus. In vivo, inhibition of disease severity reached 87% for Gly + 2,4-D and 42% for Gly. A synergistic effect was observed with the commercial Gly + 2,4-D mixture. Application of 2,4-D alone in the in vivo assays did not reduce or increase disease severity. Gly and Gly + 2,4-D act residually in inhibiting the disease. Growing E3 soybeans may combine weed and caterpillar management benefits with ASR inhibition. CONCLUSION: Application of Gly and Gly + 2,4-D herbicides in resistant E3 soybean shows inhibitory activity for ASR. © 2023 Society of Chemical Industry.

Assuntos