RESUMO

Microfluidic cotton thread-based electroanalytical devices (µTEDs) are analytical systems with attractive features such as spontaneous passive flow, low cost, minimal waste production, and good sensitivity. Currently, sample injection in µTEDs is performed by hand using manual micropipettes, which have drawbacks such as inconstant speed and position, dependence of skilled analysts, and need of physical effort of operator during prolonged times, leading to poor reproducibility and risk of strain injury. As an alternative to these inconveniences, we propose, for the first time, the use of electronic micropipettes to carry out automated injections in µTEDs. This new approach avoids all disadvantages of manual injections, while also improving the performance, experience, and versatility of µTEDs. The platform developed here is composed by three 3D-printed electrodes (detector) attached to a 3D-printed platform containing an adjustable holder that keeps the electronic pipette in the same x/y/z position. As a proof-of-concept, both injection modes (manual and electronic) were compared using three model analytes (nitrite, paracetamol, and 5-hydroxytryptophan) on µTED with amperometric detection. As result, improved analytical performance (limits of detection between 2.5- and 5-fold lower) was obtained when using electronic injections, as well as better repeatability/reproducibility and higher analytical frequencies. In addition, the determination of paracetamol in urine samples suggested better precision and accuracy for automated injection. Thus, electronic injection is a great advance and changes the state-of-art of µTEDs, mainly considering the use of more modern and versatile electronic pipettes (wider range of pre-programmed modes), which can lead to the development of even more automated systems.

RESUMO

ß-glucosidase from almonds was immobilized on a polydimethylsiloxane (PDMS) microdevice by covalent chain using 3-aminopropyltrietoxysilane and glutaraldehyde. Enzymatic activity was evaluated using p-nitro-phenyl-ß-D-glucopyranoside dissolved in a 0.01 M pH 5.0 phosphate solution at 45 °C measuring the reaction product (p-nitrophenol) at 410 nm. The microdevice consisted of two parts: the one part where the enzymatic reaction was carried out and a second part where pH was adjusted at 10, with NaOH. The reaction product was measured at the microchip exit using two optical fibers which were aligned facing each other with a gap of 7 mm, between both tips using guides located perpendicular to the flow outlet. A water bath was used to carry out the enzymatic reaction on the microdevice at 45 °C. The enzymatic surface of the PDMS microdevice was 1.15 cm2 and the immobilized ß-glucosidase amount on the microdevice was of 1.17 µg/cm2. The calculated kinetics parameters were: Km 2.5 mM; Vmax 2.2 mM/min; Kcat 908.3/min and Kcat/Km 363.3/mM min. The immobilized enzyme is very stable decreasing only 5% the first 15 days; on the 30th day, the activity was 69%, regarding the initial activity.

Assuntos