RESUMO

A calibration chamber has been designed and employed for the simple and easy determination of uptake sampling rate (RS) of volatile organic compounds (VOCs) from air using passive samplers. A flow of clean air was continuously spiked, at a constant VOC concentration, by the microinjection of a standard solution by means of a T-type tube. The developed system allowed the complete evaporation at room temperature of the standard solution in acetone and the air concentration of VOCs was easily controlled by the regulation of the clean air flow, the standard solution concentration and its flow. Active sampling was employed for monitoring the true concentration of the evaluated compounds inside the calibration chamber, using Tenax-filled desorption tubes and a low flow personal air sampling pump. Versatile, easy and rapid atmospheric monitor (VERAM) devices were employed for the passive sampling of benzene, toluene, ethylbenzene, xylenes, α-pinene, camphene, myrcene, p-cymene, and limonene from air. The RS values obtained for the passive sampling of VOCs, using the developed calibration chamber, were in the range of 1.3-16.0m3day-1 in accordance to previous calibration studies performed for VERAM samplers. The developed calibration chamber provided a continuous flow with a constant concentration of the evaluated compounds that allowed the simultaneous deployment of several samplers for a rapid establishment of RS for a passive sampler type and the easy comparison between different devices.

RESUMO

There is an increasing demand for herbal medicines in weight loss treatment. Some synthetic chemicals, such as sibutramine (SB), have been detected as adulterants in herbal formulations. In this study, two strategies using near infrared (NIR) spectroscopy have been developed to evaluate potential adulteration of herbal medicines with SB: a qualitative screening approach and a quantitative methodology based on multivariate calibration. Samples were composed by products commercialized as herbal medicines, as well as by laboratory adulterated samples. Spectra were obtained in the range of 14,000-4000 per cm. Using PLS-DA, a correct classification of 100% was achieved for the external validation set. In the quantitative approach, the root mean squares error of prediction (RMSEP), for both PLS and MLR models, was 0.2% w/w. The results prove the potential of NIR spectroscopy and multivariate calibration in quantifying sibutramine in adulterated herbal medicines samples.

Assuntos

RESUMO

A new procedure for spectrofluorimetric determination of free and total glycerol in biodiesel samples is presented. It is based on the oxidation of glycerol by periodate, forming formaldehyde, which reacts with acetylacetone, producing the luminescent 3,5-diacetyl-1,4-dihydrolutidine. A flow system with solenoid micro-pumps is proposed for solution handling. Free glycerol was extracted off-line from biodiesel samples with water, and total glycerol was converted to free glycerol by saponification with sodium ethylate under sonication. For free glycerol, a linear response was observed from 5 to 70 mg L(-1) with a detection limit of 0.5 mg L(-1), which corresponds to 2 mg kg(-1) in biodiesel. The coefficient of variation was 0.9% (20 mg L(-1), n = 10). For total glycerol, samples were diluted on-line, and the linear response range was 25 to 300 mg L(-1). The detection limit was 1.4 mg L(-1) (2.8 mg kg(-1) in biodiesel) with a coefficient of variation of 1.4% (200 mg L(-1), n = 10). The sampling rate was ca. 35 samples h(-1) and the procedure was applied to determination of free and total glycerol in biodiesel samples from soybean, cottonseed, and castor beans.

Assuntos

RESUMO

This paper describes a preconcentration method for Hg(2+) and MeHg(+) in water samples using sodium diethyldithiocarbamate immobilized in polyurethane foam (PU-NaDDC) and an extraction method for several mercury species in sediment samples, including MeHg(+), EtHg(+) and PhHg(+), which is simple, rapid, and uses a single organic solvent. Separation and measurement were done by high-performance liquid chromatography on-line with inductively coupled plasma mass spectrometry (HPLC/ICP-MS). Initially, the test of recovery was applied using procedures compatible with HPLC. Under the optimum extraction conditions, recoveries of 96.7, 96.3 and 97.3% were obtained for MeHg(+), EtHg(+), and PhHg(+), respectively, from n=4 spiked sediment samples. This study also demonstrates that the combination of solid-phase extraction on PU-NaDDC with HPLC separation and ICP-MS detection is an effective preconcentration procedure for simultaneous measurement of Hg(2+) and MeHg(+) at ultra-trace levels in water samples. The application of the proposed procedure to the determination of mercury species in drinking water sample was investigated. The proposed method clearly gave satisfactory average recoveries between 93.7 and 101.5%.

Assuntos

RESUMO

A non-chromatographic, sensitive and simple analytical method has been developed for the determination of toxic arsenic species in vegetable samples by hydride generation-atomic fluorescence spectrometry (HG-AFS). As(III), As(V), dimethylarsinic acid (DMA) and monomethylarsonic acid (MMA) were determined by hydride generation-atomic fluorescence spectrometry using a series of proportional equations. The method is based on a single extraction of the arsenic species considered from vegetables through sonication at room temperature with H(3)PO(4) 1 mol L(-1) in the presence of 0.1% (w/v) Triton XT-114 and washing of the solid phase with 0.1% (w/v) EDTA, followed by direct measurement of the corresponding hydrides in four different experimental conditions. The limit of detection of the method was 3.1 ng g(-1) for As(III), 3.0 ng g(-1) for As(V), 1.5 ng g(-1) for DMA and 1.9 ng g(-1) for MMA, in all cases expressed in terms of sample dry weight. Recovery studies provided percentages greater than 91% for all considered species in spiked samples of chards and aubergines. Total toxic As found in the aforementioned samples was at the level of 90 ng g(-1); As(III) is followed by As(V), DMA and MMA which are the main species of As in chards being As(V) the main As compound in aubergines.

Assuntos

RESUMO

It has been developed an automatic stop-flow procedure for sequential photometric determination of anionic and cationic surfactants in a same sample of water. The flow system was based on multicommutation process that was designed employing two solenoid micro-pumps and six solenoid pinch valves, which under microcomputer control carry out fluid propelling and reagent solutions handling. A homemade photometer using a photodiode as detector and two light emitting diodes (LEDs) with emission at 470 nm (blue) and 650 nm (red) as radiation sources, which was tailored to allow the determination of anionic and cationic surfactants in waters. The procedure for anionic surfactant determination was based on the substitution reaction of methyl orange (MO) by the anionic surfactant sodium dodecylbenzene sulfonate (DBS) to form an ion-pair with the cetyl pyridine chloride (CPC). Features such as a linear response ranging from 0.35 to 10.5 mg L(-1) DBS (R=0.999), a detection limit of 0.06 mg L(-1) DBS and a relative standard deviation of 0.6% (n=11) were achieved. For cationic surfactant determination, the procedure was based on the ternary complex formation between cationic surfactant, Fe(III) and chromazurol S (CAS) using CPC as reference standard solution. A linear response range between 0.34 and 10.2 mg L(-1) CPC (R=0.999), a detection limit of 0.05 mg L(-1) CPC and a relative standard deviation of 0.5% (n=11) were obtained. In both cases, the sampling throughput was 60 determinations per hour. Reagents consumption of 7.8 microg MO, 8.2 microg CPC, 37.2 microg CAS and 21.6 microg Fe(III) per determination were achieved. Analyzing river water samples and applying t-test between the results found and those obtained using reference procedures for both surfactant types provide no significant differences at 95% confidence level.

RESUMO

A method using bi-directional electrostacking (BDES) in a flow system is presented for As preconcentration and speciation analysis. Some parameters such as electrostacking time and applied voltage, support buffers and their concentrations were investigated. Boric acid plus sodium hydroxide at 0.1mol/l concentration was selected as support buffer to improve the pre-concentration factor (PF) for As(V). An analytical range from 2.0 to 50.0mugl(-1), and 0.35mugl(-1) as limit of detection, when applied 750V for 20min, were achieved. Under these conditions, a pre-concentration factor of 4.8 was obtained. The proposed method was applied to determine As(V) in mineral water and natural water samples (river, fountain and gold mine) from Ouro Preto city. Recoveries from 93.5 to 106.4% were achieved at 10mugl(-1) added As level (R.S.D.s between 3 and 7%). Potassium permanganate (10mgl(-1)) was used for oxidising As species in order to determine total As, being established the concentration of As(III) from the difference between total As and As(V).

RESUMO

Near infrared spectroscopy (NIR) has been used to determine important indicators of the quality of beers, for example original and real extract and alcohol content, using a partial least squares (PLS) calibration approach. A population of 43 samples, obtained commercially in Spain and including different types of beer, was used. Cluster hierarchical analysis was used to select calibration and validation data sets. Absorbance sample spectra, in transmission mode, were obtained in triplicate by using a 1-mm pathlength quartz flow cell and glass chromatography vials of 6.5 mm internal diameter. The two methods of sample introduction were compared critically, on the basis of spectral reproducibility for triplicate measurements and after careful selection of the best spectral pre-processing and the spectral range for building the PLS model, to obtain the best predictive capability. For each mode of sample introduction two calibration sets were assayed, one based on the use of 15 samples and a second extended based on use of 30 samples, thus leaving 28 and 13 samples, respectively, for validation. The best results were obtained for 1 mm flow cell measurements. For this method original zero-order spectra data in the ranges 2220-2221 and 2250-2350 nm were chosen. For the real extract, original extract, and alcohol d(x-y) and s(x-y) values of -0.04 and 0.07% w/w, -0.01 and 0.13% w/w, and -0.01 and 0.1% v/v, respectively, were obtained. The maximum errors in the prediction of any of these three indicators for a new sample were 2.2, 1.2, and 1.9%, respectively. This method compares favorably with the automatic reference method in terms of speed, reagent consumed, and waste generated.

Assuntos

RESUMO

A novel procedure has been developed for spectrophotometric determination of anionic surfactants in water using a solenoid micro-pump as fluid-propulsion device. The proposed method is based on substitution of methyl orange (MO) by anionic surfactants in the formation of an ion-pair with the cetyl pyridine ion (CPC+) at pH 5.0. The flow network comprised four solenoid micro-pumps which, under microcomputer control, enabled sample and reagent introduction, and homogenisation in the reaction zone. The system is flexible and simple to operate and control, and sensitive and precise. The analytical plot for the anionic surfactant was linear between 1.43x10(-6) and 1.43x10(-5) mol L(-1) (0.5 to 5.0 mg L(-1); R=0.997, n=5). The relative standard deviation was 0.8% (n=11) for a sample containing 5.74x10(-6) mol L(-1) (2 mg L(-1)) surfactant. The limit of detection was 9.76x10(-8) mol L(-1) (0.034 mg L(-1)) and the sampling throughput was 60 determinations per hour. The results obtained for washing-water samples were comparable with those obtained by use of the reference method, and no significant differences at the 95% confidence level were observed.

RESUMO

Rare earth elements (REE) and phosphorus (P) in apatite were determined using inductively coupled plasma optical emission spectrometry (ICP-OES) after partial dissolution of the granitic rocks and pure apatite. The dissolution was performed with nitric acid in an open system and the matrix elements were separated by a cation exchange procedure. Samples of pure apatite from granitic rocks were dissolved with, 0.14 mol L(-1) nitric acid. The results showed that the release of REE is due to apatite leaching because it could be assessed by comparing the chondrite-normalised pattern corresponding to the rocks and the pure apatite. Similar results were found for absolute REE abundance from the partial dissolution of the rocks and pure apatite. This simple and rapid method can be applied for the determination of REE in apatite as an indicator for mineral exploration, although its use in petrology could be possible.

RESUMO

This paper reports on a new strategy for the slurry sampling determination of dithiocarbamate pesticide zineb [[ethylenebis(dithiocarbamato)]zinc] employing a FIA system with a flame atomic absorption spectrometry detector. In the flow system, an on-line alkaline hydrolysis of the pesticide is performed, allowing the release of Zn(II) ions to the solution, which are easily detected by a flame AAS technique. Several parameters that could affect the performance of the analytical methodology were studied, such as the concentration of NH3(aq) used in the hydrolysis step, the effect of the presence of Triton X-100 on the sensitivity and precision, and the FIA parameters (carrier flow rate and mixing coil volume). Under optimized conditions, aqueous slurries containing 2.5 to 25 microg ml(-1) zineb provided good linear calibration fits. From the obtained data, a detection limit (3sigma) of 1.0 microg ml(-1) zineb was found and a repeatability of 2.7% was obtained from 12 measurements of a slurry containing 2.5 microg m(-1) zineb. On the other hand, a precision (reproducibility) of 7.8% was achieved from three determinations of a sample containing 128 mg g(-1) of the pesticide. Also, the developed system provides a sampling frequency of 72 h(-1).

Assuntos

RESUMO

A flow injection method has been developed for the direct determination of free available Pb(II) and total Pb content in wine samples. The method is based on the chemical sorption of Pb(II), from pH 7 buffered solutions, on a packed polyurethane foam column, modified by addition of 2-(2-benzothiazolylazo)-p-cresol (BTAC). After this step, lead was directly eluted with a stream of 0.1 mol l(-1) HCl into an air C(2)H(2) flame in which lead was determined by atomic absorption spectrometry. Total lead was analyzed after sample digestion with nitric acid and hydrogen peroxide, being free available lead determined by direct sample on-line preconcentration and elution. The method provides a limit of detection (3sigma) of 1 mug l(-1) lead and relative standard deviation, which varies from 6 to 0.7% for lead concentration of 10 and 500 mug l(-1). Total content of lead in wine samples analyzed varied from 8 to 42 mug l(-1) being obtained free available values of Pb(II) under the limit of detection of the method. Recovery studies on natural wine samples, spicked with inorganic lead, evidenced the remaining capability of ligands, present in the wine, to avoid lead retention on the polyurethane foam loaded with BTAC.