RESUMO
We investigated the effect of sodium ascorbate (SA) on the microtensile bond strengths (MTBSs) of different composites to bovine enamel after vital bleaching with hydrogen peroxide (HP) or carbamide peroxide (CP). Thirty bovine incisors were randomly divided into five groups and treated with no bleaching application (control), 35% HP alone, 35% HP+10% SA for 10 minutes (HP+SA), 16% CP alone, or 16% CP+10% SA for 10 minutes (CP+SA). Specimens were restored with Silorane adhesive and Filtek Silorane composite (designated as S/group) or with Clearfil SE bond and Filtek Supreme XT (designated as F/group). Composite build-up was created on the enamel. Sectioned specimens (n=10 per group; 1 mm2; cross-sectional area) were created and stressed in a universal testing machine at 1 mm/min crosshead speed. The application of 10% SA immediately after bleaching with 16% CP or 35% HP increased the enamel MTBS, regardless of the adhesive/composite resin used. The resulting MTBS values were similar to those of the control groups. Use of 16% CP and 35% HP alone decreased the enamel MTBS, regardless of the adhesive/composite resin used, with F/CP+SA=F/HP+SA=F/CP=S/CP+SA=S/HP+SA=S/C>S/CP=S/HP=F/CP=F/HP (p<0.05). We concluded that the application of SA for 10 minutes immediately after vital bleaching increases the enamel BS for dimethacrylate- and silorane-based composites.
Assuntos
Antioxidantes/farmacologia , Ácido Ascórbico/farmacologia , Resinas Compostas/química , Colagem Dentária/métodos , Metacrilatos/química , Resinas de Silorano/química , Clareamento Dental/métodos , Animais , Peróxido de Carbamida , Bovinos , Esmalte Dentário/química , Esmalte Dentário/efeitos dos fármacos , Adesivos Dentinários/química , Peróxido de Hidrogênio/química , Teste de Materiais , Peróxidos/química , Cimentos de Resina/química , Propriedades de Superfície/efeitos dos fármacos , Resistência à Tração/efeitos dos fármacos , Ureia/análogos & derivados , Ureia/químicaRESUMO
We investigated the effect of sodium ascorbate (SA) on the microtensile bond strengths (MTBSs) of different composites to bovine enamel after vital bleaching with hydrogen peroxide (HP) or carbamide peroxide (CP). Thirty bovine incisors were randomly divided into five groups and treated with no bleaching application (control), 35% HP alone, 35% HP + 10% SA for 10 minutes (HP + SA), 16% CP alone, or 16% CP + 10% SA for 10 minutes (CP + SA). Specimens were restored with Silorane adhesive and Filtek Silorane composite (designated as S / group) or with Clearfil SE bond and Filtek Supreme XT (designated as F / group). Composite build-up was created on the enamel. Sectioned specimens (n = 10 per group; 1 mm2; cross-sectional area) were created and stressed in a universal testing machine at 1 mm/min crosshead speed. The application of 10% SA immediately after bleaching with 16% CP or 35% HP increased the enamel MTBS, regardless of the adhesive / composite resin used. The resulting MTBS values were similar to those of the control groups. Use of 16% CP and 35% HP alone decreased the enamel MTBS, regardless of the adhesive / composite resin used, with F / CP + SA = F / HP + SA = F / CP = S / CP + SA = S / HP + SA = S / C > S / CP = S / HP = F / CP = F / HP (p < 0.05). We concluded that the application of SA for 10 minutes immediately after vital bleaching increases the enamel BS for dimethacrylate- and silorane-based composites.
Assuntos
Animais , Bovinos , Antioxidantes/farmacologia , Ácido Ascórbico/farmacologia , Resinas Compostas/química , Colagem Dentária/métodos , Metacrilatos/química , Resinas de Silorano/química , Clareamento Dental/métodos , Esmalte Dentário/química , Esmalte Dentário/efeitos dos fármacos , Adesivos Dentinários/química , Peróxido de Hidrogênio/química , Teste de Materiais , Peróxidos/química , Cimentos de Resina/química , Propriedades de Superfície/efeitos dos fármacos , Resistência à Tração/efeitos dos fármacos , Ureia/análogos & derivados , Ureia/químicaRESUMO
OBJECTIVES: The purpose of this study was to investigate the effect of different air-polishing powders on the color stability of different types of composite resin restorative materials. MATERIAL AND METHODS: Thirty cylindrical specimens (15×2 mm) were prepared for each of 7 composite resin restorative materials. All specimens were polished with a series of aluminum oxide polishing discs (Sof-Lex). The prepared specimens of each composite resin were randomly divided into 3 groups of 10 specimens each, for control (Group-C) and two air-powder applications (Group-CP: Cavitron Prophy-Jet; Group-PS: Sirona ProSmile prophylaxis powder). A standard air-polishing unit (ProSmile Handly) was used. All specimens were air-powdered for 10 s at 4-bar pressure. The distance of the spray nosel from the specimens was approximately 10 mm and angulation of the nosel was 90°. Specimens were stored in 100 mL of coffee (Nescafe Classic) for 24 h at 37°C. Color measurement of all specimens was recorded before and after exposure to staining agent with a colorimeter (Minolta CR-300). Color differences (∆E*) between the 2 color measurements (baseline and after 24 h storage) were calculated. The data were analyzed with a 2-way ANOVA test, and mean values were compared by the Tukey HSD test (p<0.05). RESULTS: According to the 2-way ANOVA results, composite resin restorative materials, air-polishing powders, and their interaction were statistically significant (p<0.05) For Aelite Aesthetic Enemal, Filtek Z250, Grandio, CeramX Mono, and Quixfil composite resin restorative materials, no significant difference was observed between Group-PS and Group-CP (p>.05) and these groups demonstrated the highest ∆E* values. For Filtek Silorane and IntenS, the highest ∆E* values were observed in Group-PS. The lowest ∆E* values for all composite resin groups were observed in Group-C. When comparing the 7 composite resin restorative materials, Aelite Aesthetic Enemal demonstrated significantly less ∆E* values than the other composite resins tested. The highest ∆E* values were observed in Quixfil. CONCLUSION: Except for Quixfil, all control groups of composite resins that were polished Sof-Lex exhibited clinically acceptable ∆E values (<3.7). Air-polishing applications increased the color change for all composite resin restorative materials tested. Composite restorations may require re-polishing after air-polishing.
Assuntos
Cor , Resinas Compostas/química , Polimento Dentário/métodos , Pressão do Ar , Óxido de Alumínio/química , Análise de Variância , Colorimetria , Teste de Materiais , Pós , Pigmentação em Prótese , Distribuição Aleatória , Propriedades de Superfície , Fatores de TempoRESUMO
The purpose of this study was to investigate the effect of different polishing methods on color stability of posterior, universal and nanohybrid composite resin restorative materials upon exposure to a staining agent. Twenty-five specimens were prepared for each of 5 different composite resins (Filtek Z250, Filtek P60, Quadrant LC, Grandio and Filtek Supreme). Specimens were divided into 5 groups and different polishing procedures, including polishing discs (Pd), polishing discs then diamond polishing paste (PdP), polishing discs then a liquid polishing system (Biscover) (PdB), and combinations of these (PdPB) were used. Unpolished specimens served as the control (C). The specimens were stored for 48 h in a coffee solution. The color of all specimens was measured before and after exposure with a colorimeter, and total color change (DeltaE*) were calculated. The data were analyzed with a two-way ANOVA and the means were compared by Tukey HSD test (alpha=0.05). The lowest color difference was observed in the groups PdP and C, while the highest color difference was observed in PdPB, and PdB. When comparing the five different restorative materials, no significant difference was observed between FiltekP60 and FiltekZ250, and these materials demonstrated significantly less color change than Quadrant LC and the nanohybrid materials (Grandio, Filtek Supreme). The posterior (Filtek P60) and universal (Filtek Z250) composite resin restorative materials, which do not contain tetraethyleneglycol dimethacrylate (TEGDMA), were found to be less stainable than the nanohybrid (Grandio, Filtek Supreme) and universal (Quadrant LC) composite resins, which contain TEGDMA. The use of diamond polishing paste after polishing with polishing discs significantly decreased staining when compared to the groups that used polishing discs alone, for all restorative materials tested. The highest color change values were obtained for the specimens that were polished with the Biscover liquid polish system (PdB and PdPB groups).