RESUMO
Natural and renewable resources from plants or animals are an important source of biomaterials due to their biocompatibility and high availability. Lignin is a biopolymer present in the biomass of plants, where it is intertwined and cross-linked with other polymers and macromolecules in the cell walls, generating a lignocellulosic material with potential applications. We have prepared lignocellulosic-based nanoparticles with an average size of 156 nm that exhibit a high photoluminescence signal when excited at 500 nm with emission in the near-infrared (NIR) region at 800 nm. The advantage of these lignocellulosic-based nanoparticles is their natural luminescent properties and their origin from rose biomass waste, which eliminates the need for encapsulation or functionalization of imaging agents. Moreover, the in vitro cell growth inhibition (IC50) of lignocellulosic-based nanoparticles is about 3 mg/mL, and no in vivo toxicity was registered up to 57 mg/kg, which suggests that they are suitable for bioimaging applications. In addition, these nanoparticles can circulate in the blood and are excreted in urine. The combined high luminescence signal in NIR, small size, low in vitro toxicity, low in vivo toxicity, and blood circulation support the potential of lignin-based nanoparticles as a novel bioimaging agent.
Assuntos
Lignina , Nanopartículas , Animais , Nanopartículas/toxicidade , Luminescência , Espectroscopia de Luz Próxima ao InfravermelhoRESUMO
Hydrogels are promising candidates for wound healing bandages because they can mimic the native skin microenvironment. Additionally, there is increasing growth in the use of naturally derived materials and plant-based biomaterials to produce healthcare products with healing purposes because of their biocompatibility and biodegradation properties. In this study, cellulose extracted from biodiverse sources in Ecuador was used as the raw material for the fabrication of hydrogels with enhanced antifouling properties. Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and scanning electron microscopy (SEM) were used to characterize the cellulose and hydrogels. In vitro and ex vivo tests were performed to evaluate the antimicrobial activity of hydrogels against Gram-negative bacteria as a model. Finally, the hydrogel synthesized with cellulose extracted from pitahaya showed improved antibacterial activity when applied over pigskin as a proof of concept for wound dressing. Therefore, the present results suggest that cellulose-based hydrogels are good candidates for application as wound dressings.
Assuntos
Celulose , Hidrogéis , Celulose/farmacologia , Celulose/química , Hidrogéis/farmacologia , Hidrogéis/química , Antibacterianos/química , Bandagens , PeleRESUMO
Ultrasound (US) and X-ray imaging are diagnostic methods that are commonly used to image internal body structures. Several organic and inorganic imaging contrast agents are commercially available. However, their synthesis and purification remain challenging, in addition to posing safety issues. Here, we report on the promise of widespread, safe, and easy-to-produce particulate calcium fluoride (part-CaF2) as a bimodal US and X-ray contrast agent. Pure and highly crystalline part-CaF2 is obtained using a cheap commercial product. Scanning electron microscopy (SEM) depicts the morphology of these particles, while energy-dispersive X-ray spectroscopy (EDS) confirms their chemical composition. Diffuse reflectance ultraviolet-visible spectroscopy highlights their insulating behavior. The X-ray diffraction (XRD) pattern reveals that part-CaF2 crystallizes in the face-centered cubic cell lattice. Further analyses regarding peak broadening are performed using the Scherrer and Williamson-Hall (W-H) methods, which pinpoint the small crystallite size and the presence of lattice strain. X-ray photoelectron spectroscopy (XPS) solely exhibits specific peaks related to CaF2, confirming the absence of any contamination. Additionally, in vitro cytotoxicity and in vivo maximum tolerated dose (MTD) tests prove the biocompatibility of part-CaF2. Finally, the results of the US and X-ray imaging tests strongly signal that part-CaF2 could be exploited in bimodal bioimaging applications. These findings may shed a new light on calcium fluoride and the opportunities it offers in biomedical engineering.
Assuntos
Materiais Biocompatíveis , Fluoreto de Cálcio , CristalizaçãoRESUMO
Various noninvasive imaging techniques are used to produce deep-tissue and high-resolution images for biomedical research and clinical purposes. Organic and inorganic bioimaging agents have been developed to enhance the resolution and contrast intensity. This paper describes the synthesis of polytetrafluoroethylene-like nanoparticles (PTFE≈ NPs), their characterization, biological activity, and bioimaging properties. Transmission electron microscopy (TEM) images showed the shape and the size of the as-obtained small and ultrasmall PTFE≈ NPs. Fourier transform infrared spectroscopy (FTIR) confirmed the PTFE-like character of the samples. X-ray diffraction (XRD) enabled the determination of the crystallization system, cell lattice, and index of crystallinity of the material in addition to the presence of titania (TiO2) as the contamination. These findings were corroborated by X-ray photoelectron spectroscopy (XPS) that identifies the chemical states of the elements present in the samples along with their atomic percentages allowing the determination of both the purity index of the sample and the nature of the impurities. Additionally, diffuse reflectance ultraviolet-visible spectroscopy (UV-vis) was used to further assess the optical properties of the materials. Importantly, PTFE≈ NPs showed significant in vitro and in vivo biocompatibility. Lastly, PTFE≈ NPs were tested for their ultrasound and X-ray contrast properties. Our encouraging preliminary results open new avenues for PTFE-like nanomaterials as a suitable multifunctional contrast agent for biomedical imaging applications. Combined with suitable surface chemistry and morphology design, these findings shed light to new opportunities offered by PTFE nanoparticles in the ever-booming biomedical field.
Assuntos
Meios de Contraste , Nanopartículas , Politetrafluoretileno , Difração de Raios X , Raios XRESUMO
Suture biomaterials are critical in wound repair by providing support to the healing of different tissues including vascular surgery, hemostasis, and plastic surgery. Important properties of a suture material include physical properties, handling characteristics, and biological response for successful performance. However, bacteria can bind to sutures and become a source of infection. For this reason, there is a need for new biomaterials for suture with antifouling properties. Here we report two types of cellulose fibers from coconut (Cocos nucifera) and sisal (Agave sisalana), which were purified with a chemical method, characterized, and tested in vitro and in vivo. According to SEM images, the cellulose fiber from coconut has a porous surface, and sisal has a uniform structure without internal spaces. It was found that the cellulose fiber from sisal has mechanical properties closer to silk fiber biomaterial using Ultimate Tensile Strength. When evaluating the cellulose fibers biodegradability, the cellulose from coconut showed a rapid weight loss compared to sisal. The antifouling test was negative, which demonstrated that neither possesses intrinsic microbicidal activity. Yet, a weak biofilm was formed on sisal cellulose fibers suggesting it possesses antifouling properties compared to cellulose from coconut. In vivo experiments using healthy mice demonstrated that the scarring and mechanical connection was like silk for both cellulose fibers. Overall, our results showed the potential use of cellulose fibers from vegetal for surgical sutures due to excellent mechanical properties, rapid degradation, and no bacterial adhesion.
RESUMO
Excipients represent the complement of the active principle in any pharmaceutical form. Their function is to provide stability, protection, and to ensure absorption of the drug and acceptability in patients. Cellulose is a conventional excipient in many pharmaceutical solid dosage products. Most of the sources used to extract microcrystalline cellulose come from cotton or wood, which are expensive and in high demand from other industries. As plants are considered the main source of excipient production, we have taken advantage of the biodiversity of Ecuador to evaluate microcrystalline cellulose extracted from borojó (Alibertia patinoi), a native plant, as an excipient for solid dosage formulations. The method of choice for tablet manufacturing was direct compression since it is a conventional fabrication method in the pharmaceutical industry. First, we performed scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD) in order to compare the structure and characteristics of the extracted cellulose with two reference commercial cellulose materials. Second, we performed quality tests to evaluate the use of the isolate as an excipient including fluidity, hardness, friability, and disintegration. Compared with commercial and microcrystalline cellulose, the extracted cellulose from the native plant showed comparable characteristics and is consequently a potential excipient that could be used in the pharmaceutical industry. Last, we performed a dissolution test in which we concluded that all tablets have a short release time of active principle.