RESUMO

Objetivos. Explorar el efecto de las características de superficie sobre el volumen total y la viabilidad de la biopelícula formada sobre pilares de cicatrización de PEEK y titanio. Métodos. Los parámetros de rugosidad (S a y S k) y la energía superficial de pilares de cicatrización de PEEK y titanio (n=3) fueron determinados mediante microscopía confocal láser de barrido (CLSM) y ángulo de contacto, respectivamente. Se determinó luego el volumen total y la viabilidad de una biopelícula bacteriana multiespecie cultivada por 30 días, mediante CLSM y el reactivo LIVE/DEAD Kit BacLight. El tamaño del efecto se determinó mediante d de Cohen. Resultados. Los pilares de PEEK mostraron una mayor rugosidad que los de titanio (S a 0,41 µm vs 0,17 µm), pero no se observaron diferencias en la energía superficial. Si bien el volumen total de biopelícula fue mayor en titanio que en PEEK (696 µm3 vs 419 µm3), no hubo diferencias en la proporción de bacterias vivas entre ambos materiales. Conclusiones. La viabilidad de la biopelícula bacteriana formada no guarda relación directa con las características superficiales de pilares de cicatrización de PEEK y titanio.

Objetivo. Explorar o efeito das características da superfície no volume total e viabilidade do biofilme formado em PEEK e pilares de cicatrização de titânio. Métodos. Parâmetros de rugosidade (S a e S k) e energia de superfície de PEEK e pilares de titânio (n = 3) foram determinados por microscopia confocal de varredura a laser (CLSM) e ângulo de contato, respectivamente. O volume total e a viabilidade de um biofilme bacteriano multiespécie cultivado por 30 dias foram então determinados usando CLSM e o reagente LIVE/DEAD Kit BacLight. O tamanho do efeito foi determinado usando o d de Cohen. Resultados. Os pilares de PEEK mostraram maior rugosidade do que os de titânio (S a 0,41 µm vs 0,17 µm), mas não foram observadas diferenças na energia de superfície. Embora o volume total de biofilme tenha sido maior no titânio do que no PEEK (696 µm3 vs 419 µm3), não houve diferenças na proporção de bactérias vivas entre os dois materiais. Conclusões. A viabilidade do biofilme bacteriano formado não está diretamente relacionada às características da superfície dos pilares de cicatrização de PEEK e titânio.

Objectives . To explore the effect of surface characteristics on the total volume and viability of a bacterial biofilm developed on the surface of PEEK and titanium healing abutments. Methods. Surface parameters S a and S k, as well as the surface energy of PEEK and titanium healing abutments (n=3) were determined using confocal laser scanning microscopy (CLSM) and contact angle, respectively. The total volume and viability of a multispecies bacterial biofilm cultivated for 30 days were determined using CLSM and the LIVE/DEAD BacLight reactive kit. Effect size was determined using Cohen's d. Results. PEEK healing abutments displayed a higher surface roughness than titanium (S a 0.41 µm vs 0.17 µm), although no differences in surface energy were observed. Despite the higher total volume of the biofilm measured on titanium abutments compared to PEEK (696 µm3 vs 419 µm3), no differences in the live/dead bacterial ratio were observed. Conclusions. Bacterial viability of the biofilm did not show a direct relation to the surface characteristics of PEEK and titanium healing abutments.

RESUMO

Flowable bulk-fill resin-based composites (BF-RBCs) represent a new and interesting alternative for the bulk-fill restorative techniques in the posterior region. However, they comprise a heterogeneous group of materials, with important differences in composition and design. Therefore, the aim of the present systematic review was to compare the main properties of flowable BF-RBCs, including their composition, degree of monomer conversion (DC), polymerization shrinkage and shrinkage stress, as well as flexural strength. The search was conducted following PRISMA guidelines in the Medline (PubMed), Scopus and Web of Science databases. In vitro articles reporting on the DC, polymerization shrinkage/shrinkage stress, and flexural strength of flowable BF-RBCs strength were included. The QUIN risk-of-bias (RoB) tool was used for assessing the study quality. From initially 684 found articles, 53 were included. Values for DC ranged between 19.41 and 93.71%, whereas polymerization shrinkage varied between 1.26 and 10.45%. Polymerization shrinkage stresses reported by most studies ranged between 2 and 3 MPa. Flexural strength was above 80 MPa for most materials. A moderate RoB was observed in most studies. Flowable BF-RBCs meet the requirements to be indicated for bulk fill restoration technique in the posterior region. However, important variations among composition and properties hinder extrapolation of the results to materials different from those reported here. Clinical studies are urgently required to assess their performance under a real working scenario.

RESUMO

Ceramic partial laminate veneers represent a conservative option for the correction of morphological abnormalities, diastemas, and fractured anterior teeth, with minimal or no tooth preparation. The present clinical report describes the use of a partial laminate veneer to correct the shape of a maxillary right central incisor to match the restoration of the more damaged adjacent tooth. The failure of the partial laminate veneer after only 18 months was analyzed using a systematic fractographic approach, identifying critical considerations that should be addressed when providing this type of restoration.

RESUMO

Screw-retained implant-supported ceramic restorations have shown increased rates of technical complications compared with their cemented counterparts, including fracture and chipping of the ceramic structures. The present clinical report identified the causes leading to the catastrophic failure of a screw-retained lithium disilicate veneered crown cemented to a zirconia abutment with a titanium base by using a systematic fractographic approach. A combination of occlusal overloading, a deficient design and inadequate material selection was identified as being responsible for the fracture. These findings highlight the importance of a thorough analysis of the anatomic conditions and loading scenario of screw-retained implant-supported restorations.

Assuntos

RESUMO

RESUMEN: La rehabilitación de rebordes severamente atróficos mediante prótesis híbridas con subestructura cromo-cobalto fabricadas por sinterizado láser asegura el ajuste pasivo, aumentando la estabilidad de los tejidos de soporte a largo plazo. Los controles periódicos y enseñanza de técnicas de higiene son fundamentales para el éxito de rehabilitaciones complejas sobre implantes. El propósito de este reporte de caso es realizar la evaluación clínica y radiográfica a 5 años de prótesis híbridas maxilar y mandibular fabricadas mediante sinterizado láser, encontrándose resultados satisfactorios en la evaluación y seguimiento.

ABSTRACT: Rehabilitation of severely atrophic ridges using hybrid cobalt-chrome substructures manufactured by laser sintering ensures passive fit, increasing support tissue stability. Regular check-ups and the teaching of hygiene techniques are essential for the success of complex implant restorations. The purpose of this case report is to perform a 5-year clinical and radiographic evaluation of hybrid maxillary and mandibular prostheses manufactured using laser sintering, achieving satisfactory results in the evaluation and follow-up.

Assuntos

RESUMO

RESUMEN: Los laminados vitrocerámicos ultradelgados constituyen una alternativa conservadora para la resolución de alteraciones estéticas. Sin embargo, su acondicionamiento con ácido fluorhídrico suele no estar exento de complicaciones, por lo que el uso de un sistema autograbante en base a polifluoruro de amonio (Monobond Etch&Prime, MEP) permite disminuir el riesgo de sobregrabado, simplificando la técnica. El presente reporte presenta el seguimiento a dieciocho meses de un caso clínico resuelto mediante laminados vitrocerámicos acondicionados únicamente con MEP. Caso. Paciente joven con alteraciones estéticas en el sector anterosuperior. Se realizaron preparaciones conservadoras para la confección de laminados ultradelgados en disilicato de litio (e.maxPress). Las vitrocerámicas fueron acondicionadas sólo con MEP y se cementaron con Variolink Esthetic LC. Al año y medio las restauraciones se observaron indemnes, manteniendo un buen ajuste marginal y ausencia de tinciones. Conclusiones. MEP aparece como una alternativa prometedora para reemplazar al ácido fluorhídrico en la cementación de laminados vitrocerámicos.

ABSTRACT: Ultrathin glass-ceramic veneers are a conservative approach for the restorative treatment of aesthetic disorders in the anterior region. However, surface conditioning with hydrofluoric acid of the thin structures can be usually a challenging step. Therefore, the use of a self-etching ceramic primer containing ammonium polyfluoride (Monobond Etch&Prime, MEP) offers a simplified technique with a reduced risk of overetching. Here we present an 18-month follow-up of ultrathin glass-ceramic veneers conditioned with MEP only. Case. Young female patient with an aesthetic disorder in the front region. The four upper incisors were conservatively prepared for ultrathin lithium disilicate (e.maxPress) veneers. Pre-treatment of the glass-ceramics consisted only of MEP application, followed by adhesive cementation with Variolink Esthetic LC. At the 1.5-year recall, the restorations appeared undamaged, with no marginal gap or staining. Conclusions. MEP constitutes a promising alternative to hydrofluoric acid for the adhesive cementation of glass-ceramic veneers.

Assuntos

RESUMO

RESUMEN: La incidencia de complicaciones en los tejidos periimplantarios, como recesiones y dehiscencias, ha ido en aumento en los últimos años, principalmente asociados a un incorrecto posicionamiento espacial de los implantes. El objetivo de este reporte de caso es presentar el manejo quirúrgico de una complicación estética debida a la mal posición de un implante en la zona anterior. Caso. Paciente se presenta con recesión mucosa y dehiscencia por vestibular del implante 1.2, causados por su mal posicionamiento. Se realiza explantación mediante llave de alto torque e inserción de un nuevo implante en combinación con regeneración ósea (sticky bone) e injerto de tejido conectivo, lo que recupera la armonía gingival. Conclusión. La explantación conservadora acompañada de regeneración tisular ofrecen una interesante alternativa para el tratamiento de defectos estéticos severos asociados a la mal posición de implantes. La sistematización de este tipo de protocolos es fundamental para mejorar su predictibilidad.

ABSTRACT: An increase in the incidence of peri-implant soft tissue complications, such as facial recession and dehiscence, has been observed in the last years, mainly associated with an incorrect spatial placement of the implants. This case report focuses on the surgical management of an esthetic complication due to an incorrect implant position in the anterior region. Case report. Patient presented with recession and dehiscence in the facial area of implant 1.2, due to its incorrect placement. Explantation was performed with a high torque wrench, followed by the immediate placement of a new implant in combination with bone regeneration (sticky bone) and soft tissue augmentation. Conclusion. The use of atraumatic explantation techniques followed by guided tissue regeneration offers an interesting alternative for the treatment of severe defects in the esthetic region due to incorrectly placed implants. An adequate systematization of these protocols is key to improve their predictability.

Assuntos

RESUMO

Bulk-fill resin composites represent an excellent alternative to the conventional incremental layering technique for the reduction of polymerization stress on the adhesive interface. Marginal seal can be further improved by the incorporation of bioactive fillers, such as those encountered in Giomers. However, the high translucency required for the adequate polymerization of bulk-fill materials can seriously jeopardize the final aesthetic outcome of the restorations, especially in the presence of inhomogeneous or stained dentin substrates. The aim of this case report was to present the combined use of two bulk-fill Giomer materials (Beautifil Bulk Flowable and Beautifil II LS, Shofu) for the restoration of three posterior maxillary teeth displaying a black stained dentin substrate due to amalgam corrosion products. This technique allowed completion of the restorations with a satisfactory aesthetic and biomimetic outcome. The adequate preservation of the anatomy and function of the three restorations after 24-months follow-up, provides evidence of the enhanced marginal sealing capacity of these bioactive materials and the success of bulk-fill techniques over time.

Las resinas compuestas de tipo bulk-fill representan una excelente alternativa a la técnica incremental para la reducción de la tensión de polimerización sobre la interfaz adhesiva. La incorporación de rellenos bioactivos, como los que se encuentran en los materiales con tecnología giomer, refuerzan aún más el sellado marginal de estas restauraciones. Sin embargo, la alta translucidez, necesaria para la adecuada polimerización de los materiales tipo bulk-fill, puede comprometer seriamente el resultado estético final de las restauraciones, especialmente en presencia de sustratos dentarios no homogéneos u oscurecidos. El objetivo de este reporte de caso fue presentar el uso combinado de dos materiales giomer tipo bulk-fill (Beautifil Bulk Flowable y Beautifil II LS, Shofu) para la restauración de tres dientes maxilares posteriores con un sustrato dentinario ennegrecido debido a productos de corrosión de amalgama. Esta técnica permitió completar las restauraciones con un resultado estético y biomimético satisfactorio. La adecuada conservación de la anatomía y la función de las tres restauraciones tras un período de 24 meses, aporta evidencia sobre la adecuada capacidad de sellado marginal de estos materiales bioactivos y el éxito de las técnicas de restauración tipo bulk-fill en el tiempo.

Assuntos

Assuntos

RESUMO

OBJECTIVE: Strength is one of the preferred parameters used in dentistry for determining clinical indication of dental restoratives. However, small dimensions of CAD/CAM blocks limit reliable measurements with standardized uniaxial bending tests. The objective of this study was to introduce the ball-on-three-ball (B3B) biaxial strength test for dental for small CAD/CAM block in the context of the size effect on strength predicted by the Weibull theory. METHODS: Eight representative chairside CAD/CAM materials ranging from polycrystalline zirconia (e.max ZirCAD, Ivoclar-Vivadent), reinforced glasses (Vitablocs Mark II, VITA; Empress CAD, Ivoclar-Vivadent) and glass-ceramics (e.max CAD, Ivoclar-Vivadent; Suprinity, VITA; Celtra Duo, Dentsply) to hybrid materials (Enamic, VITA; Lava Ultimate, 3M ESPE) have been selected. Specimens were prepared with highly polished surfaces in rectangular plate (12×12×1.2mm3) or round disc (Ø=12mm, thickness=1.2mm) geometries. Specimens were tested using the B3B assembly and the biaxial strength was determined using calculations derived from finite element analyses of the respective stress fields. Size effects on strength were determined based on results from 4-point-bending specimens. RESULTS: A good agreement was found between the biaxial strength results for the different geometries (plates vs. discs) using the B3B test. Strength values ranged from 110.9MPa (Vitablocs Mark II) to 1303.21MPa (e.max ZirCAD). The strength dependency on specimen size was demonstrated through the calculated effective volume/surface. SIGNIFICANCE: The B3B test has shown to be a reliable and simple method for determining the biaxial strength restorative materials supplied as small CAD/CAM blocks. A flexible solution was made available for the B3B test in the rectangular plate geometry.

Assuntos