RESUMO

Background: Hallux valgus deformity consists of a lateral deviation of the great toe, metatarsus varus, and pronation of the first metatarsal. Most osteotomies only correct varus, but not the pronation of the metatarsal. Persistent postoperative pronation has been shown to increase deformity recurrence and have worse functional outcomes. The proximal rotational metatarsal osteotomy (PROMO) technique reliably corrects pronation and varus through a stable osteotomy, avoiding fusing any healthy joints. The objective of this research is to show a prospective series of the PROMO technique. Methods: Twenty-five patients (30 feet) were operated with the PROMO technique. The sample included 22 women and 3 men, average age 46 years (range 22-59), for a mean prospective follow-up of 1 year (range 9-14 months). Inclusion criteria included symptomatic hallux valgus deformities, absence of severe joint arthritis, or inflammatory arthropathies, with a metatarsal malrotation of 10 degrees or more, with no tarsometatarsal subluxation or arthritis on the anteroposterior or lateral foot radiograph views. The mean preoperative and postoperative Lower Extremity Functional Scale (LEFS) score, metatarsophalangeal angle, intermetatarsal angle, metatarsal malrotation, complications, satisfaction, and recurrence were recorded. Results: The mean preoperative and postoperative LEFS scores were 56 and 73. The median pre-/postoperative metatarsophalangeal angle was 32.5/4 degrees and the intermetatarsal angle 15.5/5 degrees. The metatarsal rotation was satisfactorily corrected in 24 of 25 patients. An Akin osteotomy was needed in 27 of 30 feet. All patients were satisfied with the surgery, and no recurrence or complications were found. Conclusions: PROMO is a reliable technique, with good short-term results in terms of angular correction, satisfaction, and recurrence. Long-term studies are needed to determine if a lower hallux recurrence rate occurs with the correction of metatarsal rotation in comparison with conventional osteotomies. Level of evidence: IV, prospective case series.

RESUMO

BACKGROUND: The importance of the deltoid ligament in the congruency and coupling of the tibiotalar joint is well known. The current trend is to repair it in cases of acute injuries in the context of ankle fractures; however, there is limited information on how it should be reconstructed. The objective of this study was to compare different deltoid ligament repair types in an ankle fracture cadaveric model. METHODS: Sixteen cadaveric foot-ankle-distal tibia specimens were used. All samples were prepared as a supination external rotation ankle fracture model. Axial load and cyclic axial rotations were applied on every specimen using a specifically designed frame. This test was performed without deltoid injury, with deltoid injury, and after repair. The reconstruction was performed in 4 different ways (anterior, posterior, middle, and combined). Medial clear space (MCS) was measured for each condition on simulated weightbearing (WB) and gravity stress (GS) radiographs. Reflective markers were used in tibia and talus, registering the kinematics through a motion analysis system to record the tibiotalar uncoupling. RESULTS: After deltoid damage, in all cases the MCS increased significantly on GS radiographs, but there was no increase in the MCS on WB radiographs. After repair, in all cases, the MCS was normalized. Kinematically, after deltoid damage, the tibiotalar uncoupling increased significantly. All isolated repairs achieved a similar tibiotalar uncoupling value as its baseline condition. The combined repair resulted in a significant decrease in tibiotalar uncoupling. CONCLUSION: Our results show that deltoid repair recovers the tibiotalar coupling mechanism in an ankle fracture model. Isolated deltoid repairs recovered baseline MCS and tibiotalar uncoupling values. Combined repairs may lead to overconstraint, which could lead to postoperative stiffness. Clinical studies are needed to prove these results and show clinically improved outcomes. CLINICAL RELEVANCE: This study helps in finding the optimum deltoid repair to use in an acute trauma setting.

Assuntos

RESUMO

BACKGROUND: Medial column instability is a frequent finding in patients with flatfeet and hallux valgus, within others. The etiology of hallux valgus is multifactorial, and medial ray axial rotation has been mentioned as having an individual role. Our objective was to design a novel cadaveric foot model where we could re-create through progressive medial column ligament damage some components of a hallux valgus deformity. METHODS: Ten fresh-frozen lower leg specimens were used, and fluorescent markers were attached in a multisegment foot model. Constant axial load and cyclic tibial rotation (to simulate foot pronation) were applied, including pull on the flexor hallucis longus tendon (FHL). We first damaged the intercuneiform (C1-C2) ligaments, second the naviculocuneiform (NC) ligaments, and third the first tarsometatarsal ligaments, leaving the plantar ligaments unharmed. Bony axial and coronal alignment was measured after each ligament damage. Statistical analysis was performed. RESULTS: A significant increase in pronation of multiple segments was observed after sectioning the NC ligaments. Damaging the tarsometatarsal ligament generated small supination and varus changes mainly in the medial ray. No significant change was observed in axial or frontal plane alignment after damaging the C1-C2 ligaments. The FHL pull exerted a small valgus change in segments of the first ray. DISCUSSION: In this biomechanical cadaveric model, the naviculocuneiform joint was the most important one responsible for pronation of the medial column. Bone pronation occurs along the whole medial column, not isolated to a certain joint. Flexor hallucis longus pull appears to play some role in frontal plane alignment, but not in bone rotation. This model will be of great help to further study medial column instability as one of the factors influencing medial column pronation and its relevance in pathologies like hallux valgus. CLINICAL RELEVANCE: This cadaveric model suggests a possible influence of medial column instability in first metatarsal pronation. With a thorough understanding of a condition's origin, better treatment strategies can be developed.

Assuntos

RESUMO

BACKGROUND: Medial column internal rotation in hallux valgus (HV) can be measured using weight-bearing computed tomography (WBCT). Anteroposterior weight-bearing foot radiographs' (WBXR) ability to estimate medial column internal rotation in HV was evaluated comparing these measurements with those obtained from WBCT. METHODS: Three observers evaluated WBCT and WBXR of 33 HV feet twice. Medial column internal rotation was measured with WBCT and classified into 3 levels according to WBXR findings. Intra- and interobserver reliability were obtained for WBXR and WBCT, in addition to WBXR-WBCT correlation. RESULTS: WBXR and WBCT intraobserver agreement was substantial and near perfect, respectively (κ 0.79 and 0.84). Their interobserver agreement was excellent (intraclass correlation 0.85 and 0.9, respectively). The WBXR-WBCT correlation was substantial (κ 0.68). WBXR diagnostic accuracy to predict the WBCT results was 85%. CONCLUSIONS: The proposed method for medial column internal rotation measurement using WBXR is reliable and has a substantial agreement with WBCT measurements. LEVELS OF EVIDENCE: Level III.

RESUMO

Hallux valgus deformity is a multiplanar deformity, where the rotational component has been recognized over the past 5 to 10 years and given considerable importance. Years ago, a rounded shape of the lateral edge of the first metatarsal head was identified as an important factor to detect after surgery because a less rounded metatarsal head was associated to less recurrence. More recently, pronation of the metatarsal bone was identified as the cause for the rounded appearance of the metatarsal head, and therefore, supination stress was found to be useful to achieve a better correction of the deformity. Using CT scans, up to 87% of hallux valgus cases have been shown to present with a pronated metatarsal bone, which highlights the multiplanar nature of the deformity. This pronation explained the perceived shape of the metatarsal bone and the malposition of the medial sesamoid bone in radiological studies, which has been associated as one of the most important factors for recurrence after treatment. Treatment options are discussed briefly, including metatarsal osteotomies and tarsometatarsal arthrodesis.

Assuntos

RESUMO

BACKGROUND: Lisfranc injuries represent a spectrum of trauma from high-energy lesions, with significant instability of the midfoot, to low-energy lesions, with subtle subluxations or instability without gross displacement. Recently, treatment options that allow for physiologic fixation of this multiplanar joint are being evaluated. The purpose of this study was to analyze the stability of a cadaveric Lisfranc injury model fixed with a novel suture-augmented neoligamentplasty in comparison with a traditional transarticular screw fixation construct. METHODS: Twenty-four fresh-frozen, matched cadaveric leg and foot specimens (12 individuals younger than 65 years of age) were used for this study. Two different types of Lisfranc ligament injuries were tested: partial and complete. Two different methods of fixation were compared: transarticular screws and augmented suture ligamentplasty with FiberTape. Specimens were fixed to a rotation platform in order to stress the joints while applying 400 N of axial load and internal and external rotation. Six distances were measured and compared between the intact, injured, and fixed states with a 3D Digitizer arm, in order to evaluate the stability between them. Analysis of variance was used with P < .05 considered significant. RESULTS: Using distribution graphs and analyzing the grouped data, it was observed that there was no difference between the 2 stabilization methods, but the augmented suture ligamentplasty presented lower variability and observed distance shortenings were more likely to be around the mean. The variability of the stabilization with screws was 2.9 times higher than that with tape (P < .001). CONCLUSION: We suggest that augmented suture ligamentplasty can achieve similar stability to classic transarticular screws, with less variability. CLINICAL RELEVANCE: This cadaveric study adds new information on the debate about Lisfranc lesions treatment. Flexible fixations, such as the synthethic ligamentplasty used, can restore good stability such as conventional transarticular screws.

Assuntos

RESUMO

BACKGROUND: Lisfranc joint injuries can be due to direct or indirect trauma and while the precise mechanisms are unknown, twisting or axial force through the foot is a suspected contributor. Cadaveric models are a useful way to evaluate injury patterns and models of fixation, but a frequent limitation is the amount of joint displacement after injury. The purpose of this study was to test a cadaveric model that includes axial load, foot plantarflexion and pronation-supination motion, which could re-create bone diastasis similar to what is seen in subtle Lisfranc injuries. Our hypothesis was that applying pronation and supination motion to a cadaveric model would produce reliable and measurable bone displacements. METHODS: Twenty-four fresh-frozen lower leg cadaveric specimens were used. The medial (C1) and intermediate (C2) cuneiforms and the first (M1) and second (M2) metatarsal bones were marked. A complete ligament injury was performed between C1-C2 and C1-M2 in 12 specimens (group 1), and between C1-C2, C1-M2, C1-M1, and C2-M2 in 12 matched specimens (group 2). Foot pronation and supination in addition to an axial load of 400 N was applied to the specimens. A 3D digitizer was used to measure bone distances. RESULTS: After ligament injury, distances changed as follows: C1-C2 increased 3 mm (23%) with supination; C1-M2 increased 4 mm (21%) with pronation (no differences between groups). As expected, distances between C1-M1 and C2-M2 only changed in group 2, increasing 3 mm (14%) and 2 mm (16%), respectively (no differences between pronation and supination). M1-M2 and C2-M1 distances did not reach significant difference for any condition. CONCLUSIONS: Pronation or supination in addition to axial load produced measurable bone displacements in a cadaveric model of Lisfranc injury using sectioned ligaments. Distances M1-M2 and C2-M1 were not reliable to detect injury in this model. CLINICAL RELEVANCE: This new cadaveric Lisfranc model included foot pronation-supination in addition to axial load delivering measurable bone diastasis. It was a reliable Lisfranc cadaveric model that could be used to test different Lisfranc reconstructions.

RESUMO

BACKGROUND: Different techniques have been described for percutaneous Achilles tendon rupture repair, but no biomechanical evaluation has been performed separately for proximal and distal suturing techniques. The purpose of this study was to biomechanically analyze proximal versus distal percutaneous Achilles suture configurations during cyclic loading and load to failure. METHODS: A simulated, midsubstance rupture was created 6 cm proximal to the calcaneal insertion in fresh-frozen cadaveric Achilles tendons. Fifteen proximal specimens were divided into 3 groups: (A1) triple locking technique, (A2) Bunnell-type technique, and (A3) double Bunnell-type technique. Twelve distal specimens were divided into 2 groups: (B1) triple nonlocking technique and (B2) oblique technique. Repairs were subjected to cyclic testing and load to failure. Load to failure, cause of failure, and tendon elongation were evaluated. RESULTS: None of the proximal specimens and 7/12 of the distal ones failed in cyclic testing. The proximal fixation groups demonstrated significantly more strength than the distal groups (P = .001), achieving up to 710 N of failure load in Group A3. Groups B1and B2 failed on average at 380 N with no difference between them (P > .05). The majority of all repairs failed in the suture-tendon interface. Distal groups had more elongation during cyclic testing (13.7 mm) than proximal groups (9.4 mm) (P = .02). CONCLUSION: The distal fixation site in this Achilles tendon repair was significantly weaker than the proximal fixation site. A proximal modified suture configuration increased resistance to cyclic loading and load to failure significantly. CLINICAL RELEVANCE: A modification can be suggested to improve strength of the Achilles repair.

Assuntos

RESUMO

BACKGROUND: We present a mini-open Achilles tendon rupture repair technique, which does not open the paratenon and avoids the sural nerve. We perform it to recover the normal working length of the gastrocnemius-soleus complex musculotendinous unit as well as possible, trying to avoid soft-tissue complications. DESCRIPTION: This repair is performed via a 3-cm-long incision that is placed 4 cm proximal to the Achilles tendon gap. Through this incision, the interval between the superficial fascia of the leg and the paratenon is developed. Distally, 2 small incisions are made in order to introduce into the calcaneus 2 bone anchors loaded with nonabsorbable sutures. These sutures are retrieved from the distal attachment site through the interval between the fascia and the paratenon with specifically designed suture passers, and obtained through the proximal incision. The sutures are then woven through the proximal stump of the Achilles tendon, the first ones in a Bunnell and the last ones in a crisscross manner, recovering the physiological equinus of the ankle1. The fascia and skin are closed appropriately. ALTERNATIVES: Percutaneous surgical repair techniques.Open surgical repair techniques.Orthopaedic nonoperative treatment. RATIONALE: This surgical technique differs from other available mini-open techniques in that it respects the rupture hematoma, accessing the tendon far from the rupture site; it does not violate the paratenon; and because of the placement in a safe anatomical interval, it does not injure the sural nerve. Because of the mini-open approach of the technique, soft-tissue complications are rare, and thus indications for this technique can be expanded over those of open surgical techniques. EXPECTED OUTCOMES: Patients can expect a nearly complete recovery of gastrocnemius-soleus function, after an appropriate rehabilitation period. Soft-tissue complications are rare, and therefore early rehabilitation can be performed. The rehabilitation lasts for 5 months to achieve a high level of physical function. A low rerupture rate (2%) can also be expected2. The average return to work is 56 days. IMPORTANT TIPS: Try to operate within 10 days of the rupture to avoid scar formation at the rupture site.Plan the surgical procedure according to the level of the rupture in order to ensure the suture passers are long enough to span the rupture site from the proximal incision up to the calcaneus.Ensure the bone anchors are placed in the middle of the total height of the calcaneus, avoiding the enthesis, and align the anchors to be perpendicular to the axis of the calcaneus.Follow the proximal suturing technique in order to obtain the best resistance of the repair. Taking care not to overtighten consecutive sutures, restore the appropriate level of physiological equinus.

RESUMO

Proximal rotational metatarsal osteotomy (PROMO) is a technique that allows the surgeon to correct the varus and pronation of the first metatarsal that is observed in most patients with hallux valgus deformity. Persistent metatarsal pronation is a recognized recurrence factor for operatively treated hallux valgus. The indication for this technique is a mild-moderate hallux valgus deformity (i.e., intermetatarsal angle <18° and hallux valgus angle <40°) in which pronation is present. (Note that according to the literature, 10% to 20% of patients do not have pronation.) The PROMO is performed via a single proximal oblique metatarsal incision. Following completion of the osteotomy, the distal metatarsal segment is supinated (external rotation), correcting pronation and varus deviation, which is achieved as a result of the oblique nature of the osteotomy (i.e., rotation through an oblique plane). Step 1: Preoperative planning: measure the intermetatarsal angle and the metatarsal rotation. For the latter, use the published classification (mild, moderate, severe). With both values, use the table included in the PROMO tray to know which osteotomy angulation should be used. Step 2: medial foot incision. Step 3: drive the guidewire 1 cm distal to the tarsometatarsal joint. Step 4: Under fluoroscopy, ensure that the wire is parallel to the sole of the foot and perpendicular to the metatarsal. Step 5: use the positioning jig to drive a Kirschner wire with the chosen pronation correction. Step 6: slide the osteotomy jig with the previously chosen osteotomy angulation. Step 7: perform the osteotomy. Step 8: use the rotation jig with the desired pronation correction. Step 9: derotate and correct the metatarsal deformity, leaving both wires parallel to each other. Step 10: perform osteotomy transient fixation with 2 Kirschner wires. Step 11: apply a medial locking plate and an interfragmentary screw at the osteotomy site. The expected outcome is complete correction of the first metatarsal varus and pronation.

RESUMO

BACKGROUND: The most frequent complication after Weil osteotomies is a floating toe deformity, but there are no reports about its effect on the patient. In this study, we analyzed the consequences of floating toe deformities after the performance of a modified Weil osteotomy (MWO) or a modified Weil osteotomy with interphalangeal fixation (MWOIF). METHODS: We performed a retrospective review with a prospective follow-up of 50 patients (98% women, 120 rays) who underwent MWO (65 rays) or MWOIF (55 rays), with a mean age of 54 ± 12 years and a minimum follow-up of 4 years (mean of 6 years). We analyzed the presence of floating toe deformity in MWO and MWOIF and the outcomes measured by the subjective satisfaction, Lower Extremity Functional Scale (LEFS), American Orthopaedic Foot & Ankle Society (AOFAS) ankle-hindfoot score, and quality of prehension force between patients with or without floating toe deformity. RESULTS: The mean floating toe incidence was of 57%, with no significant difference between operative techniques (48% MWO, 67% MWOIF; P = .053). Our analysis did not show differences in satisfaction, LEFS and AOFAS scores, or grip strength between the group of patients with or without floating toes. CONCLUSION: The presence of a floating toe deformity was more frequent than generally believed but did not have a meaningful impact on the patient's satisfaction or functional outcomes measured by the AOFAS and LEFS scales. There was no clear correlation between operative technique, floating toe, and quality of prehension force. LEVEL OF EVIDENCE: Level III, retrospective comparative series.

RESUMO

BACKGROUND: The purpose of this study is to translate, culturally adapt, and validate the VISA-A questionnaire for Chilean Spanish speakers with Achilles tendinopathy (AT), which has been originally developed for English-speaking population. METHODS: According to the guidelines published by Beaton et al., the questionnaire was translated and culturally adapted to Chilean patients in six steps: initial translation, synthesis of the translation, back translation, expert committee review, test of the pre-final version (cohort n = 35), and development of VISA-A-CH. The resulting Chilean version was tested for validity on 60 patients: 20 healthy individuals (group 1), 20 patients with a recently diagnosed AT (group 2), and 20 with a severe AT that already initiated conservative treatment with no clinical improvement (group 3). The questionnaire was completed three times by each participant: at the time of study enrollment, after an hour, and after a week of the initial test. RESULTS: All six steps were successfully completed for the translation and cultural adaptation of the VISA-A-CH. VISA-A-CH final mean scores in the healthy group was significantly higher than those in the other groups. Group 3 had the lowest scores. Validity showed excellent test-retest reliability (rho c = 0.999; Pearson's r = 1.000) within an hour and within a week (rho c = 0.837; Pearson's r = 0.840). CONCLUSIONS: VISA-A was translated and validated to Chilean Spanish speakers successfully, being comparable to the original version. We believe that VISA-A-CH can be recommended as an important tool for clinical and research settings in Chilean and probably Latin-American Spanish speakers.

Assuntos

RESUMO

BACKGROUND: Tibialis posterior tendon transfer is performed when loss of dorsiflexion has to be compensated. We evaluated the circumtibial (CT), above-retinaculum transmembranous (TMAR), and under-retinaculum transmembranous (TMUR) transfer gliding resistance and foot kinematics in a cadaveric foot model during ankle range of motion (ROM). METHODS: Eight cadaveric foot-ankle distal tibia specimens were dissected free of soft tissues on the proximal end, applying an equivalent force to 50% of the stance phase to every tendon, except for the Achilles tendon. Dorsiflexion was tested with all of the tibialis posterior tendon transfer methods (CT, TMAR, and TMUR) using a tension tensile machine. A 10-repetition cycle of dorsiflexion and plantarflexion was performed for each transfer. Foot motion and the force needed to achieve dorsiflexion were recorded. RESULTS: The CT transfer showed the highest gliding resistance ( P < .01). Regarding kinematics, all transfers decreased ankle ROM, with the CT transfer being the condition with less dorsiflexion compared with the control group (6.8 vs 15 degrees, P < .05). TMUR transfer did perform better than TMAR with regard to ankle dorsiflexion, but no difference was shown in gliding resistance. The CT produced a supination moment on the forefoot. CONCLUSION: The CT transfer had the highest tendon gliding resistance, achieved less dorsiflexion and had a supination moment. Clinical Relevance We suggest that the transmembranous tibialis posterior tendon transfer should be the transfer of choice. The potential bowstringing effect when performing a tibialis posterior tendon transfer subcutaneously (TMAR) could be avoided if the transfer is routed under the retinaculum, without significant compromise of the final function and even with a possible better ankle range of motion.

Assuntos

RESUMO

BACKGROUND: No clear guideline or solid evidence exists for peroneal tendon tears to determine when to repair, resect, or perform a tenodesis on the damaged tendon. The objective of this study was to analyze the mechanical behavior of cadaveric peroneal tendons artificially damaged and tested in a cyclic and failure mode. The hypothesis was that no failure would be observed in the cyclic phase. METHODS: Eight cadaveric long leg specimens were tested on a specially designed frame. A longitudinal full thickness tendon defect was created, 3 cm in length, behind the tip of the fibula, compromising 66% of the visible width of the peroneal tendons. Cyclic testing was initially performed between 50 and 200 N, followed by a load-to-failure test. Tendon elongation and load to rupture were measured. RESULTS: No tendon failed or lengthened during cyclic testing. The mean load to failure for peroneus brevis was 416 N (95% confidence interval, 351-481 N) and for the peroneus longus was 723 N (95% confidence interval, 578-868 N). All failures were at the level of the defect created. CONCLUSION: In a cadaveric model of peroneal tendon tears, 33% of remaining peroneal tendon could resist high tensile forces, above the physiologic threshold. CLINICAL RELEVANCE: Some peroneal tendon tears can be treated conservatively without risking spontaneous ruptures. When surgically treating a symptomatic peroneal tendon tear, increased efforts may be undertaken to repair tears previously considered irreparable.

Assuntos

RESUMO

More than 200 different surgical techniques exist for hallux valgus (HV). Some of them are designed for mild, moderate, or severe deformities depending on their correction power. Nevertheless, they all correct only the coronal and/or sagittal plane deformity. Just a handful of them correct the known axial malrotation that exists in most HV cases. This malrotation is one possible factor that could be the source of recurrence of an operated HV as it has been described. We describe a new technique which simultaneously corrects the metatarsal internal rotation and varus deformity by rotating the metatarsal through an oblique plane osteotomy. This is performed with no bone wedge resection. Also, there is a broader bone surface contact than on a transverse proximal osteotomy. This technique is easy to remember and relatively simple to perform in primary and revision cases. The authors results show that it is as safe and effective as other procedures, with some advantages to be discussed. LEVELS OF EVIDENCE: Diagnostic Level 5. See Instructions for Authors for a complete description of levels of evidence.

RESUMO

INTRODUCTION: Femoral/tibial lengthening with a telescopic, magnetically-powered, intramedullary nail is an alternative to lengthening with external fixation. METHODS: Pre-clinical testing was conducted of the PRECICE in a human cadaver. A retrospective review of the first 30 consecutive patients who underwent unilateral lengthening was also conducted. Nail accuracy was obtained by comparing the amount of nail distraction to the final bone length achieved at the end of the distraction process. Relative standard deviation of accuracy was used to calculate nail precision. RESULTS: Devices performed successfully in a human cadaver. Thirty consecutive patients (10 females, 20 males; mean age, 23 years) with limb length discrepancy (LLD) were followed an average of 19 months (range, 12-24 months). Etiology included congenital shortening (14), posttraumatic deformities (7), Ollier disease (3), osteosarcoma resection (1), prior clubfoot (2), hip dysplasia (1), post-septic growth arrest of knee (1), and LLD after hip arthroplasty (1). Twenty-four femoral and eight tibial nails were implanted. Mean preoperative lengthening goal was 4.4 cm (range, 2-6.5 cm); mean postoperative length achieved was 4.3 cm (range, 1.5-6.5 cm). Average consolidation index was 36.4 days/cm (range, 12.8-113 days/cm). Mean nail accuracy was 97.3% with a precision of 92.4%. Average preoperative and 12-month postoperative Enneking scores were 21.5 and 25.3 (p < 0.001), respectively. The preoperative and 12-month postoperative SF-12 physical and mental component scores were not statistically different. Nine complications (nine limb segments) resolved: two partial femoral unions, two suspected deep vein thrombosis (DVT), one delayed tibial union, one fibular nonunion, one peroneal nerve irritation, one knee joint subluxation, and one confirmed DVT. Twenty-nine (91%) of 32 limb segments achieved successful bone healing without revision surgery. DISCUSSION: Limb lengthening with PRECICE is reliable, but larger trials with longer follow-up will reveal limitations. Implantable nails prevent problems associated with external fixation, such as muscle tethering and pin-site infections.

Assuntos

RESUMO

The ankle represents the most commonly injured weightbearing joint in the human body. They are typically the result of low-energy, rotational injury mechanisms. However, ankle fractures represent a spectrum of injury patterns from simple to very complex, with varying incidence of posttraumatic arthritis. Stable injury patterns can be treated nonoperatively; unstable injury patterns are typically treated operatively given that they could lead to severe arthritis if not properly addressed.

Assuntos

RESUMO

BACKGROUND: The most common methods for assessing severity of hallux valgus deformity and the effects of an operative procedure are the angular measurements in weightbearing radiographs, specifically the hallux valgus angle and intermetatarsal angle (IMA). Our objective was to analyze the interobserver variability in hallux valgus patients of a new angle called the "angle to be corrected" (ATC), and to compare its capacity to differentiate between different deformities against IMA. METHODS: We included 28 symptomatic hallux valgus patients with 48 weightbearing foot x-rays. Three trained observers measured the 1 to 2 IMA and the ATC. We then identified retrospectively 45 hallux valgus patients, which were divided into 3 operative technique groups having used the ATC as reference, and analyzed the capacity of the IMA to differentiate between them. RESULTS: The IMA average value was 13.6 degrees, and there was a significant difference between observer 3 and observer 1 (P = .001). The average value for the ATC was 8.9 degrees, and there was no difference between observers. Both angles showed a high intraclass correlation. Regarding the capacity to differentiate between operative technique groups, the ATC was different between the 3 operative technique groups analyzed, but the IMA showed differences only between 2. CONCLUSIONS: The ATC was at least as reliable as the intermetatarsal angle for hallux valgus angular measurements, showing a high intraclass correlation with no interobserver difference. It can be suggested that the ATC was better than the IMA to stratify hallux valgus patients when deciding between different operative treatments. LEVEL OF EVIDENCE: Level III, comparative study.

Assuntos

Assuntos