RESUMO

The oxidation of the complementarity-determining region (CDR) in monoclonal antibodies (mAbs) is a critical quality attribute that can affect the clinical efficacy and safety of recombinant mAb therapeutics. In this study, a robust hydrophobic interaction chromatography (HIC) method was developed to quantify and characterize CDR oxidation variants in mAb-A by using a Proteomix Butyl-NP5 column. The HIC analysis revealed oxidation variants that eluted earlier than the main species with weaker hydrophobicity. It was found that Met105 in the CDR was more susceptible to oxidation. Additionally, it was noted that the oxidation of Met105 on a single heavy chain resulted in elution at a distinct position compared to the oxidation on two heavy chains. This observation led to the fractionation and enrichment of the oxidized variants for further evaluation of their biofunction. The study also demonstrated that the oxidation of Met105 did not impact the antigen-binding capacity but significantly reduced the PD-1/PD-L1 blockade activity of mAb-A. The HIC method, which was employed to quantify CDR oxidation, underwent validation and was subsequently utilized for stability studies as well as for assessing the similarity between mAb-A and its reference product.

RESUMO

Nano Ru-based catalysts, including monometallic Ru and Ru-Zn nanoparticles, were synthesized via a precipitation method. The prepared catalysts were evaluated on partial hydrogenation of benzene towards cyclohexene generation, during which the effect of reaction modifiers, i.e., ZnSO4, MnSO4, and FeSO4, was investigated. The fresh and the spent catalysts were thoroughly characterized by XRD, TEM, SEM, XPS, XRF, and DFT studies. It was found that Zn2+ or Fe2+ could be adsorbed on the surface of a monometallic Ru catalyst, where a stabilized complex could be formed between the cations and the cyclohexene. This led to an enhancement of catalytic selectivity towards cyclohexene. Furthermore, electron transfer was observed from Zn2+ or Fe2+ to Ru, hindering the catalytic activity towards benzene hydrogenation. In comparison, very few Mn2+ cations were adsorbed on the Ru surface, for which no cyclohexene could be detected. On the other hand, for Ru-Zn catalyst, Zn existed as rodlike ZnO. The added ZnSO4 and FeSO4 could react with ZnO to generate (Zn(OH)2)5(ZnSO4)(H2O) and basic Fe sulfate, respectively. This further benefited the adsorption of Zn2+ or Fe2+, leading to the decrease of catalytic activity towards benzene conversion and the increase of selectivity towards cyclohexene synthesis. When 0.57 mol·L-1 of ZnSO4 was applied, the highest cyclohexene yield of 62.6% was achieved. When MnSO4 was used as a reaction modifier, H2SO4 could be generated in the slurry via its hydrolysis, which reacted with ZnO to form ZnSO4. The selectivity towards cyclohexene formation was then improved by the adsorbed Zn2+.

Assuntos

RESUMO

Mn3O4 coated Ru nanoparticles (Ru@Mn3O4) were synthesized via a precipitation-reduction-gel method. The prepared catalysts were evaluated for partial hydrogenation of benzene towards cyclohexene generation by applying ZnSO4, MnSO4 and FeSO4 as reaction additives. The fresh and spent catalysts were thoroughly characterized by XRD, X ray fluorescence (XRF), XPS, TEM and N2-physicalsorption in order to understand the promotion effect of Mn3O4 as the modifier as well as ZnSO4, MnSO4 and FeSO4 as reaction additives. It was found that 72.0% of benzene conversion and 79.2% of cyclohexene selectivity was achieved after 25 min of reaction time over Ru@Mn3O4 with a molar ratio of Mn/Ru being 0.46. This can be rationalized in terms of the formed (Zn(OH)2)3(ZnSO4)(H2O)3 on the Ru surface from the reaction between Mn3O4 and the added ZnSO4. Furthermore, Fe2+ and Fe3+ compounds could be generated and adsorbed on the surface of Ru@Mn3O4 when FeSO4 is applied as a reaction additive. The most electrons were transferred from Ru to Fe, resulting in that lowest benzene conversion of 1.5% and the highest cyclohexene selectivity of 92.2% after 25 min of catalytic experiment. On the other hand, by utilizing MnSO4 as an additive, no electrons transfer was observed between Ru and Mn, which lead to the complete hydrogenation of benzene towards cyclohexane within 5 min. In comparison, moderate amount of electrons were transferred from Ru to Zn2+ in (Zn(OH)2)3(ZnSO4)(H2O)3 when ZnSO4 is used as a reaction additive, and the highest cyclohexene yield of 57.0% was obtained within 25 min of reaction time.