RESUMO

The objective of this work was to assess the efficacy of different proteolytic agents on the bond strength of pit and fissure sealants to bovine enamel. Eighty-four bovine enamel specimens were randomly assigned in groups according to the pit and fissure sealant applied (HelioSeal F or Dyad Flow). Then, the specimens were subdivided according to the proteolytic agent used (n = 7): Group 1, distilled water (control); Group 2, 10 wt.% Tergazyme®; Group 3, 10 wt.% ZYME®; Group 4, 10% papain gel; Group 5, 10% bromelain gel; and Group 6, 5.25 wt.% sodium hypochlorite. The cell viability of the proteolytic solutions was assessed through the MTT assay. The proteolytic agents were applied on the enamel surface prior to the acid-etching procedure; then, the pit and fissure sealants were placed. The micro-shear bond strength was evaluated after 24 h or 6 months of water storing at 37 °C. Representative SEM images were taken for each experimental group. The bond strength data were statistically analyzed by a three-way ANOVA test using a significance level of α = 0.05. Bromelain and papain proteolytic solutions did not exert any cytotoxic effect on the human dental pulp cells. After 24 h and 6 months of aging, for both pit and fissure sealants, sodium hypochlorite, papain, bromelain, and Tergazyme® achieved statistically significant higher bond strength values (p < 0.05). Irrespective of the deproteinizing agent used, Dyad Flow resulted in a better bond strength after 6 months of aging. The type 1 etching pattern was identified for sodium hypochlorite, papain, and bromelain. Tergazyme®, papain, and bromelain demonstrated efficacy in deproteinizing enamel surfaces prior to acid etching, leading to the improved bond strength of pit and fissure sealants. Clinically, this suggests that these proteolytic agents can be considered viable alternatives to traditional methods for enhancing sealant retention and longevity. Utilizing these agents in dental practice could potentially reduce sealant failures.

RESUMO

Coastal areas are affected by urban, industrial and agriculture pollutants runoff, wastewater and stormwater discharges, making this environment the final repository of chemical contaminants. These contaminants have the potential to spread out to the entire food chain, impacting marine life and the quality of their habitat. In this aspect, the concept of marine mammals as bioindicators provides an approach to the degree of contamination in the environment and to the identification and management of multiple sources of contaminants. The present study analyzed several elements like As, Ba, Cd, Cr, Cu, Hg, Mn, Mo, Ni, Pb, V and Zn in liver tissue from two dolphin species: Sotalia guianensis, a near-threatened species, and the vulnerable Pontoporia blainvillei. In the study, we also investigated if dolphins (population) recorded using the heaviest urban areas have higher concentrations of contaminants in their tissues. Dolphin samples (n = 40 S. guianensis; n = 97 P. blainvillei) were collected by daily monitoring carried out by Santos Basin Beach Monitoring Project (PMP-BS), from stranded individuals found in São Paulo state. The Spearman's rank correlation showed distinct correlations in the accumulation of trace elements by both species, indicating different sources of exposure to the elements studied or distinct biochemical processes between species. Interspecific and intraspecific variations were observed, possibly related to the individual distribution and feeding habits. Correlations were observed between age and concentrations of trace elements, positive for Cd, Hg and Mo. Finally, our findings indicate high levels of Cu, Zn, and concentrations of As, V and Hg in fetuses, in particular, an analysis was performed on a fetus found inside a stranded individual, indicating placental transfer as the first route of exposure for some elements.

Assuntos

RESUMO

In this study, we investigate the antibacterial effect of silver atoms implanted into a thin surface layer of titanium at low energies using an alternative ion plating technology called Diversified Ion Plating. Silver atoms were incorporated into titanium samples using reactive low-voltage ion plating at 2 keV and 4 keV. Surface modifications and morphology were evaluated using wettability, profilometry measurements, and energy-dispersive spectroscopy. For a precise determination of the quantity and depth of implanted silver atoms on titanium surfaces, a combination of experimental techniques such as Rutherford Backscattering Spectrometry along with Monte Carlo simulations were utilized. To assess the antibacterial effects of the silver atoms incorporated into pure titanium surfaces, bacterial suspension immersion tests were performed with a standard strain of Staphylococcus aureus (ATCC 12600). The outcomes indicate that titanium surfaces implanted with silver atoms were more effective in inhibiting the growth of Staphylococcus aureus than pure titanium surfaces. Better results were found when the deposition was performed at 4 keV, indicating that a deeper implantation of silver, spanning a few nanometers, can result in a longer and more effective release of silver atoms. These findings suggest the potential for the development of new, cost-effective biomaterials, paving the way for improved implant materials in various health-related applications.

RESUMO

PURPOSE: To evaluate in situ the influence of sweat, oil, sunscreen, and disinfectant solution on the color stability, hardness, and roughness of elastomer for facial prostheses. MATERIALS AND METHODS: Standardized and intrinsically pigmented specimens remained in contact with human skin from the same person for 30 days, considering exposures (n = 36 per group), absent of exposition (Control, C); sweat and oiliness contact (SO); sweat and oiliness associated with sunscreen (SOS); 0.12% chlorhexidine digluconate immersion (CD0.12%); and all agents exposed (SOSCD). The main variables were color change (CIELab and National Standard Bureau system, NBS), Shore A hardness, and surface roughness, measured at baseline and 30 days. Qualitative analyses were performed by atomic force microscopy (AFM) and scanning electron microscopy (SEM). The data were analyzed by Kruskal-Wallis tests (color) and two-way ANOVA (hardness and roughness) with Sidak post-test (α = 0.05). RESULTS: CD0.12% (1.54 ± 0.49) and SOSCD (2.10 ± 1.03) had similar effects and caused the smallest color changes, considered mild and noticeable (NBS), respectively. SOS promoted the greatest color change (6.99 ± 1.43, NBS: large) and hardness (17.97 ± 0.56); SOS promoted intermediate roughness (3.48 ± 1.05) between SOSCD (2.25 ± 0.53), and two similar groups: C (4.46 ± 0.95), and CD0.12% (4.39 ± 1.26). The qualitative analysis showed an irregular, dense, dry, and whitish layer on the surface of the specimens exposed to sunscreen, which was reduced when in contact with 0.12% chlorhexidine digluconate. CONCLUSIONS: Endogenous and exogenous factors are capable of altering elastomer properties. The 0.12% chlorhexidine digluconate minimized the changes caused by sweat, oil, and sunscreen.

RESUMO

This study aimed to evaluate the antimicrobial properties, cell viability, and matrix metalloproteinase (MMP) inhibition capacity of several endodontic materials aimed at vital pulp therapy: Pro Root MTA®, EndoSequence®, Biodentine®, MTA Angelus®, TheraCal LC®, and BioC Repair®. The materials were prepared according to the manufacturer's instructions. Antimicrobial tests were conducted using a microcosm biofilm model, cell viability was assessed using murine fibroblasts (L929), and MMP activity was analyzed through electrophoresis. The results showed that BioC Repair®, Biodentine®, and EndoSequence® exhibited similar antimicrobial properties, while MTA Angelus® and ProRoot MTA® had inferior results but were comparable to each other. In terms of cell viability, no significant differences were observed among the materials. EndoSequence® demonstrated the highest MMP inhibition capacity. In conclusion, BioC Repair®, Biodentine®, EndoSequence®, and TheraCal® showed better antimicrobial properties among the tested materials. The materials did not exhibit significant differences in terms of cytotoxicity. However, EndoSequence® displayed superior MMP inhibition capacity.

RESUMO

OBJECTIVE: In this study, a comparative evaluation of the physicochemical properties of Cention N and other direct restorative materials was performed. Three restorative materials-a resin-modified glass ionomer (Fuji II LC), an alkasite-based resinous material (Cention N), and a resin composite (Tetric N Ceram)-were characterized in terms of degree of conversion, Knoop hardness number (KHN) ratio, flexural strength, elastic modulus, water sorption, water solubility, microshear bond strength to dentin, immediate microleakage, and radiopacity. METHODOLOGY: The microshear bond strength to dentin and microleakage of Cention N were evaluated with and without the application of an adhesive system (Tetric N Bond Universal). A one-way ANOVA test was used to analyze the data in terms of degree of conversion, KHN ratio, water sorption, water solubility, microshear bond strength to dentin, and radiopacity. A two-way ANOVA test (carried out considering the material type and ethanol aging as factors) was used to analyze the data in terms of flexural strength and elastic modulus. The Kruskal-Wallis test was used to statistically analyze the data on microleakage. A significance level of α=0.05 was used for all tests. RESULTS: Fuji II LC was found to have the highest degree of conversion, water sorption, and microleakage, as well as the lowest flexural strength. Cention N had the highest solubility; when used with an adhesive system, it achieved bond strength and microleakage similar to those of the Tetric N Ceram composite. Tetric N Ceram had the highest degree of conversion, KHN ratio, and radiopacity. Conclusion: The properties of Cention N validate its efficacy as an alternative direct restorative material when used in conjunction with an adhesive system.

Assuntos

RESUMO

Objetivo. Comparar la estabilidad dimensional de un hidrocoloide irreversible de vaciado convencional con hidrocoloides irreversibles de vaciado extendido. Metodología. Fueron evaluados cuatro productos con indicación de vaciado extendido: Jeltrate Plus (Denstply Sirona), Hydrogum 5 (Zhermack SpA), Algimax (Major), Kromopan (Lascod) y un producto de vaciado convencional (Tropicalgin; Zhermack SpA). Con cada producto se realizaron 10 impresiones y se vaciaron en yeso tipo III en cinco tiempos de almacenamiento diferentes (0, 24, 96, 120 y 168 horas). Un escáner para modelos tridimensionales se utilizó para digitalizar los modelos de yeso y realizar las mediciones correspondientes: sumatoria de las longitudes, variabilidad dimensional, porcentaje de variabilidad. Resultados. Las cinco marcas comerciales presentaron una sumatoria de longitudes mayor al grupo control (p<0,033). A las 0, 24 y 96h Tropicalgin e Hydrogum 5 presentaron significativamente menor variación dimensional en comparación con el modelo maestro (p<0,001). Los porcentajes de variabilidad oscilaron entre un 0.24 a 0.91%. Conclusiones. La estabilidad dimensional depende del producto utilizado. Almacenado correctamente, el hidrocoloide irreversible de vaciado convencional parece no sufrir alteraciones significativas hasta 96h, mientras que en el caso de Hydrogum 5 parece mantener su estabilidad dimensional hasta 168h.

Objetivo. Comparar a estabilidade dimensional de um hidrocolóide irreversível de vazamento convencional com hidrocolóides irreversíveis de vazamento prolongado. Metodologia. Foram avaliados quatro produtos com indicação de vazamento estendido: Jeltrate Plus (Denstply Sirona), Hydrogum 5 (Zhermack SpA), Algimax (Major), Kromopan (Lascod) e um produto de vaziamento convencional (Tropicalgin; Zhermack SpA). Para cada produto foram feitas 10 impressões e vazadas em gesso tipo III em cinco tempos de armazenamento diferentes (0, 24, 96, 120 e 168 horas). Um scanner de modelos tridimensionais foi utilizado para digitalizar os modelos de gesso e fazer as medições correspondentes: soma dos comprimentos, variabilidade dimensional, percentagem de variabilidade. Resultados. As cinco marcas comerciais apresentaram somatório de comprimentos maior que o grupo controle (p<0,033). Nos tempos 0, 24 e 96h Tropicalgin e Hydrogum 5 apresentaram variação dimensional significativamente menor em comparação ao modelo Mestre (p<0,001). Os percentuais de variabilidade variaram de 0,24 a 0,91%. Conclusões. A estabilidade dimensional depende do produto utilizado. Armazenado corretamente, o hidrocolóide irreversível de vaziamento convencional convencionalmente parece não sofrer alterações significativas até 96h, enquanto no caso do Hydrogum 5 parece manter sua estabilidade dimensional até 168h.

Aim . Compare the dimensional stability of a conventional pouring irreversible hydrocolloid with extended pouring irreversible hydrocolloids. Methodology. Four products with extended emptying indication were evaluated: Jeltrate Plus (Denstply Sirona), Hydrogum 5 (Zhermack SpA), Algimax (Major), Kromopan (Lascod) and a conventional emptying product (Tropicalgin; Zhermack SpA). For each product, 10 impressions were made and cast in type III plaster at five different storage times (0, 24, 96, 120 and 168 hours). A three-dimensional model scanner was used to digitize the plaster models and make the corresponding measurements: sum of lengths, dimensional variability, percentage of variability. Results . The five commercial brands presented a greater sum of lengths than the control group (p<0,033). At 0, 24 and 96h Tropicalgin and Hydrogum 5 presented significantly less dimensional variation compared to the master model (p<0,001). The variability percentages ranged from 0.24 to 0.91%. Conclusions. Dimensional stability depends on the product used. Stored correctly, the conventionally cast irreversible hydrocolloid appears not to undergo significant alterations up to 96h, while in the case of Hydrogum 5 it appears to maintain its dimensional stability up to 168h.

RESUMO

La educación bioética se erige como cuestión ineludible en el campo de las ciencias de la salud ante los avances de la tecnociencia y el desarrollo humano. Se realizó una investigación descriptiva transversal, con el propósito de analizar la divulgación científica sobre educación bioética aportada por las revistas cubanas de salud indexadas en Scielo, en el periodo 2020-2022. Fueron consultados los sitios Scielo y Google académico, se consideraron los términos de búsqueda: bioética, educación bioética, enseñanza bioética. En el análisis se incluyeron las variables título, año, número de artículos, producción por revistas, país de procedencia, tipología, número de autores, distribución por ejes temáticos y número de citaciones. La muestra quedó constituida por 21 trabajos. La contribución de artículos sobre el tema mostró un comportamiento discreto. La mayor producción se situó en el año 2022. Predominaron los trabajos realizados por autores cubanos, en la tipología de artículos de revisión (28,5%) y desarrollados en coautoría. El eje temático orientado a la atención en los principios bioéticos, los derechos de pacientes y el consentimiento informado fue el más abordado (38,1%), seguido de la educación bioética ante los desafíos generados por la COVID-19, que concentró el mayor número de citaciones. Los resultados develan un reto investigativo que requiere ampliar el tratamiento del tema con experiencias enriquecedoras que logren trascender en la comunidad científica.

Bioethical education stands as an unavoidable issue in the field of health sciences in the face of advances in technoscience and human development. A cross-sectional descriptive research was carried out with the purpose of analyzing the scientific dissemination on bioethics education provided by the Cuban health magazines indexed in Scielo in the period 2020-2022. The Scielo and Google academic sites were consulted, the search terms were considered: bioethics, bioethics education, bioethics teaching. The variables title, year, number of articles, production by journals, country of origin, typology, number of authors, distribution by thematic axes and number of citations were included in the analysis. The sample consisted of 21 works. The contribution of articles on the topic showed a discreet behavior. The highest production was in 2022. The works carried out by Cuban authors predominated, in the typology of review articles (28.5%) and developed in co-authorship. The thematic axis focused on attention to bioethical principles, patient rights and informed consent was the most addressed (38.1%) followed by bioethical education in the face of the challenges generated by COVID-19, which concentrated the largest number. of citations. The results reveal a research challenge that requires expanding the treatment of the topic with enriching experiences that can transcend the scientific community.

A educação em bioética coloca-se como uma questão incontornável no campo das ciências da saúde frente aos avanços da tecnociência e do desenvolvimento humano. Realizou-se uma pesquisa descritiva transversal com o objetivo de analisar a divulgação científica sobre educação bioética proporcionada pelas revistas cubanas da área da saúde indexadas na Scielo no período 2020-2022. Foram consultados os sites Scielo e Google Acadêmico, considerados os termos de busca: bioética, educação em bioética, ensino em bioética. As seguintes variáveis foram incluídas na análise: título, ano, número de artigos, produção por periódicos, país de origem, tipologia, número de autores, distribuição por eixos temáticos e número de citações. A amostra constituiu-se de 21 trabalhos. O A contribuição de artigos sobre o tema mostrou um comportamento discreto. A maior produção foi em 2022. Predominaram obras de autores. ubanos, na tipologia de artigos de revisão (28,5%) e desenvolvidos em coautoria. O eixo temático voltado para a atenção aos princípios bioéticos, direitos do paciente e consentimento informado foi o mais abordado (38,1%), seguido pela educação em bioética frente aos desafios gerados pela Covid-19, que concentrou o maior número de citações. Os resultados revelam um desafio de pesquisa que requer ampliar o tratamento do tema com experiências enriquecedoras que conseguem transcender na comunidade científica.

RESUMO

Abstract Objective: In this study, a comparative evaluation of the physicochemical properties of Cention N and other direct restorative materials was performed. Three restorative materials—a resin-modified glass ionomer (Fuji II LC), an alkasite-based resinous material (Cention N), and a resin composite (Tetric N Ceram)—were characterized in terms of degree of conversion, Knoop hardness number (KHN) ratio, flexural strength, elastic modulus, water sorption, water solubility, microshear bond strength to dentin, immediate microleakage, and radiopacity. Methodology: The microshear bond strength to dentin and microleakage of Cention N were evaluated with and without the application of an adhesive system (Tetric N Bond Universal). A one-way ANOVA test was used to analyze the data in terms of degree of conversion, KHN ratio, water sorption, water solubility, microshear bond strength to dentin, and radiopacity. A two-way ANOVA test (carried out considering the material type and ethanol aging as factors) was used to analyze the data in terms of flexural strength and elastic modulus. The Kruskal-Wallis test was used to statistically analyze the data on microleakage. A significance level of α=0.05 was used for all tests. Results: Fuji II LC was found to have the highest degree of conversion, water sorption, and microleakage, as well as the lowest flexural strength. Cention N had the highest solubility; when used with an adhesive system, it achieved bond strength and microleakage similar to those of the Tetric N Ceram composite. Tetric N Ceram had the highest degree of conversion, KHN ratio, and radiopacity. Conclusion: The properties of Cention N validate its efficacy as an alternative direct restorative material when used in conjunction with an adhesive system.

RESUMO

The radiological protection has the purpose of safeguarding the physical well-being of the user, preventing exposure to detrimental levels of ionizing radiation. This study introduces a novel, cost-effective category of lead-free elastomeric material designed for radiation shielding. The filler compounds utilized are notably lighter than conventional lead-based materials, enhancing user ergonomics during application. They comprise of a blend of barium sulfate combined or not with magnesium oxide with addition-cure liquid silicone rubber. To ensure the effectiveness of the radiation shielding, X-ray transmission measurements were performed for the different thicknesses of the materials and the results compared with Monte Carlo simulations. Additionally, the physical properties of the new materials, such as density, homogeneity, tensile strength, viscosity, and wettability, were also evaluated. The findings indicate that both materials fulfill the requirement for application in radiation protection garments.

Assuntos

RESUMO

In late October 2021, one of the veterinarians and the occupational physician of a bovine and swine abattoir from Entre Ríos Province, Argentina were alerted about workers with atypical pneumonia symptoms, raising suspicious of a possible Q fever outbreak. An outbreak epidemiological investigation was carried out. Analysis was based on the description of the study population, according to gender, age, symptoms, and position within the abattoir, as well as on outbreak epidemic curve and its probable origin. Cases of Q fever in the workers were confirmed by serology. Measurements of the association between the evaluated variables and the risk of exposure were investigated and calculated as attack rates. The outbreak occurred between October and November 2021, symptomatically affecting 11 workers, out of a total exposed population of 49 individuals. The index case was a 33-year-old male who started with symptoms on 27 October 2021, and the outbreak extended for at least 17 days. Workers in the clean zone of the slaughter floor had a 4.68 times higher risk of contracting Q fever than people located in other areas. Importantly, two pregnant cows were slaughtered a few days before the outbreak began, which could have been the origin of the outbreak. The present study demonstrates the urgent need to consider Q fever when diagnosing abortive diseases of ruminants in Argentina, as well as in zoonotic disease epidemiological surveillance to inform all actors of the health system.

Assuntos

RESUMO

Introduction: Genomic selection (GS) has gained global importance due to its potential to accelerate genetic progress and improve the efficiency of breeding programs. Objectives of the research: In this research we proposed a method to improve the prediction accuracy of tested lines in new (untested) environments. Method-1: The new method trained the model with a modified response variable (a difference of response variables) that decreases the lack of a non-stationary distribution between the training and testing and improved the prediction accuracy. Comparing new and conventional method: We compared the prediction accuracy of the conventional genomic best linear unbiased prediction (GBLUP) model (M1) including (or not) genotype × environment interaction (GE) (M1_GE; M1_NO_GE) versus the proposed method (M2) on several data sets. Results and discussion: The gain in prediction accuracy of M2, versus M1_GE, M1_NO_GE in terms of Pearson´s correlation was of at least 4.3%, while in terms of percentage of top-yielding lines captured when was selected the 10% (Best10) and 20% (Best20) of lines was at least of 19.5%, while in terms of Normalized Root Mean Squared Error (NRMSE) was of at least of 42.29%.

RESUMO

INTRODUCTION: The most common early postoperative complication after total laryngectomy (TL) is pharyngocutaneous fistula (PCF). Rates of PCF are higher in patients who undergo salvage TL compared with primary TL. Published meta-analyses include heterogeneous studies making the conclusions difficult to interpret. The objectives of this scoping review were to explore the reconstructive techniques potentially available for primary TL and to clarify which could be the best technique for each clinical scenario. METHODS: A list of available reconstructive techniques for primary TL was built and the potential comparisons between techniques were identified. A PubMed literature search was performed from inception to August 2022. Only case-control, comparative cohort, or randomized controlled trial (RCT) studies were included. RESULTS: A meta-analysis of seven original studies showed a PCF risk difference (RD) of 14% (95% CI 8-20%) favoring stapler closure over manual suture. In a meta-analysis of 12 studies, we could not find statistically significant differences in PCF risk between primary vertical suture and T-shaped suture. Evidence for other pharyngeal closure alternatives is scarce. CONCLUSION: We could not identify differences in the rate of PCF between continuous and T-shape suture configuration. Stapler closure seems to be followed by a lower rate of PCF than manual suture in those patients that are good candidates for this technique.

Assuntos

RESUMO

Los captadores de niebla son usados para interceptar agua contenida en la niebla y abastecer de agua a comunidades que habitan en lugares donde este recurso escasea. Se evaluó el uso de captadores de niebla para la captación de agua en un área ubicada en el páramo Pan de Azúcar, Duitama-Boyacá. Se instalaron 60 captadores de niebla, 24 de ellos, con dispositivos para medir los volúmenes de agua interceptados. Los volúmenes de agua captados, se midieron en periodos de 24 horas, por 26 días, durante un año y se usó el modelo geométrico para diferenciar el agua proveniente de la niebla. La precipitación registrada fue mayor a la reportada en la literatura. La precipitación mensual osciló entre 51 y 1198 mm y la temperatura media mensual entre los 6 y 8 °C. Los volúmenes de agua promedio colectados por los 24 captadores de niebla estuvieron entre los 0,02 Lm-2dia-1 hasta los 4,4Lm-2dia-1. Los aportes de agua provenientes de la niebla oscilaron entre los 0,02 y 1,77 mmdía-1. La dirección del viento no afectó la captación de agua y aún se presenta incertidumbre al separar el aporte real de agua proveniente de la niebla a partir de la lluvia orográfica, lo cual, sigue siendo un desafío en los ecosistemas de páramo, por lo que se debe ampliar la investigación, para mejorar los diseños y las eficiencias de los captadores de niebla.

Fog collectors are used to intercept water contained in fog and supply water to communities that live in places where this resource is scarce. We evaluated the use of mist collectors to collect water in an area located in the Pan de Azúcar paramo, Duitama-Boyacá. We installed 60 mist collectors, 24 of them with devices to measure the volumes of water intercepted. The volumes of water captured were measured in periods of 24 hours for 26 days during one year and we used the geometric model to differentiate the water from the fog. The recorded precipitation was higher than that reported in the literature. Monthly rainfall ranged between 51 and 1198mm and mean monthly temperature ranged between 6 and 8°C. The average volumes of water collected by the fog collectors were below 0.5Lm-2day-1 with a maximum of 4.4Lm-2day-1. The contributions of water from the mist ranged between 0.02 and 1.77 mmday-1. The direction of the wind did not affect the capture of water and there is still uncertainty when separating the real contribution of water from the fog from the orographic rain, which continues to be a challenge in the paramo ecosystems, for which it is necessary to expand research, to improve the designs and efficiencies of fog collectors.

RESUMO

This study aimed to evaluate the antimicrobial activity and physicochemical properties of a novel dual-cure endodontic sealer containing copaiba oil. The copaiba oil was obtained and characterized by gas chromatography (GC), and the minimum inhibitory concentration (MIC) was performed. The experimental sealers were formulated with copaiba oil concentrations of 0, 0.5, 1, and 2%, and the RealSeal™ (Sybron endo, Orange, USA) and AH Plus (Dentsply De Trey Gmbh, Konstanz, Germany) were used as the commercial references. The antimicrobial activity of the sealers was evaluated by the direct contact test for 1h and 24h. To evaluate the physicochemical properties of the sealers, the degree of conversion, setting time, film thickness, dimensional stability, and radiopacity tests were performed. The data were statistically analyzed by one-way ANOVA and Tukey's test (α = 0.05). Concerning the results, the sealers containing copaiba oil showed antimicrobial activity without harming the physicochemical properties.

Assuntos

RESUMO

Activities related to the offshore exploration and production of oil and natural gas provide economic development and an essential energy source. However, besides the risk of petroleum hydrocarbon contamination, these activities can also be sources of metals and metalloids for marine organism contamination. In this research, we evaluated the potential use of two pelagic (black-browed albatross Thalassarche melanophris and yellow-nosed albatross T. chlororhynchos) and one estuarine bird species (neotropical cormorant Nannopterum brasilianus) as sentinels of contamination of As, Cd, Cr, Cu, Pb, Mn, Mo, Zn, Ni, Ba, V, and Hg in an area under influence of oil and gas activities. The analyses were carried out in samples collected from 2015 to 2022 from 97 individuals. A factor alert; an adaptation from the contamination factor is proposed to identify individuals with high concentrations that possibly suffered contamination by anthropogenic origin. Grouping all species, the metal(loid)s with the highest concentrations were in decreasing order: Zn > Cu > Mn > Hg > As > Cd > Mo > V > Cr > Ba > Ni > Pb. Similar concentrations were observed for V, Mn, Cr and Pb among the three species. Pelagic birds showed higher levels of concentrations for Hg, As and Cd. Based on the correlations and multivariate analysis performed, the results indicate that the ecological niche factor has greater relevance in the bioaccumulation of these elements compared to the habitat. Although some individuals showed high concentrations in part of the trace elements, suggesting exposure to anthropic sources, the direct influence of oil production and exploration activities was not observed, suggesting that activities on the continent are the primary contamination source. The results of this work highlight the role of seabirds as sentinels for metal(loid)s, contributing to the knowledge of the occurrence of contaminants in the South Atlantic Ocean.

Assuntos

RESUMO

Introducción: La fijación de las restauraciones indirectas es uno de los pasos más importantes, para conseguir una adecuada retención y sellado de la interfase entre el material restaurador y el diente. Objetivo: Evaluar la resistencia de unión al cizallamiento de diferentes agentes de fijación a dos aleaciones metálicas utilizadas en odontología. Métodos: Estudio experimental in vitro. Cien especímenes de aleaciones de metales base, 50 de níquel-cromo y 50 de níquel-cromo-titanio fueron preparados y divididos de manera aleatoria en 5 grupos. Esta división se realizó acorde con el agente de fijación utilizado: sistema autograbante de dos pasos (Clearfil SE Bond; CSB), sistema adhesivo universal (Single Bond Universal; SBU), cemento resinoso autoadhesivo (Maxcem Elite; ME), ionómero de vidrio (IV) y fosfato de zinc (ZnPO). Posteriormente a la aplicación de cada agente de fijación, los especímenes tratados fueron almacenados en agua destilada por 24 h a 37 ºC y sometidos a un ensayo de resistencia de unión al cizallamiento. Resultados: La resistencia de unión al cizallamiento fue influenciada significativamente por el tipo de agente de fijación (p = 0,002) y el tipo de aleación utilizada (p < 0,001). La resistencia de unión al cizallamiento fue mayor, al utilizar el sistema Clearfil SE Bond, seguida de Single Bond Universal; las diferencias entre Maxcem Elite y el Fosfato de zinc no fueron significativas. Finalmente, el IV no mostró adhesión a ninguna de las aleaciones metálicas utilizadas. Conclusiones: El uso de Clearfil SE Bond aumentó la resistencia de unión de los cementos resinosos a las aleaciones metálicas(AU)

Introduction: The bonding of indirect restorations is one of the most important steps, in order to achieve adequate retention and sealing of the interface between the restorative material and the tooth. Objective: To evaluate the shear bond strength of different bonding agents to two metal alloys used in dentistry. Methods: In vitro experimental study. One hundred specimens of base metal alloys, 50 nickel-chromium and 50 nickel-chromium-titanium were prepared and randomly divided into 5 groups. This division was made according to the bonding agent used: two-step self-etching system (Clearfil SE Bond; CSB), universal adhesive system (Single Bond Universal; SBU), self-adhesive resin cement (Maxcem Elite; ME), glass ionomer (IV) and zinc phosphate (ZnPO). After the application of each bonding agent, the treated specimens were stored in distilled water for 24 hr at 37 ºC and subjected to a shear bond strength test. Results: Shear bond strength was significantly influenced by the type of bonding agent (p = 0.002) and the type of alloy used (p < 0.001). Shear bond strength was highest when using the Clearfil SE Bond system, followed by Single Bond Universal; the differences between Maxcem Elite and Zinc Phosphate were not significant. Finally, IV did not show adhesion to any of the metal alloys used. Conclusions: The use of Clearfil SE Bond increased the bond strength of resinous cements to metallic alloys(AU)

Assuntos