RESUMO
Polymeric-inorganic hybrid nanomaterials have emerged as novel multifunctional platforms because they combine the intrinsic characteristics of both materials with unexpected properties that arise from synergistic effects. In this work, hybrid nanogels based on mesoporous silica nanoparticles, oligo (ethylene glycol) methacrylates, and acidic moieties were developed employing ultrasound-assisted free radical precipitation/dispersion polymerization. Chemical structure was characterized by infrared spectroscopy and nuclear magnetic resonance. Hydrodynamic diameters at different temperatures were determined by dynamic light scattering, and cloud point temperatures were determined by turbidimetry. Cell viability in fibroblast (NIH 3T3) and human prostate cancer (LNCaP) cell lines were studied by a standard colorimetric assay. The synthetic approach allows covalent bonding between the organic and inorganic components. The composition of the polymeric structure of hybrid nanogels was optimized to incorporate high percentages of acidic co-monomer, maintaining homogeneous nanosized distribution, achieving appropriate volume phase transition temperature values for biomedical applications, and remarkable pH response. The cytotoxicity assays show that cell viability was above 80% even at the highest nanogel concentration. Finally, we demonstrated the successful cell inhibition when they were treated with camptothecin-loaded hybrid nanogels.
RESUMO
Advances in radiotherapy technology during the last 25 years have significantly improved both dose conformation to tumors and the preservation of healthy tissues, achieving almost real-time feedback by means of high-precision treatments and theranostics. Owing to this, developing high-performance systems capable of coping with the challenging requirements of modern ionizing radiation is a key issue to overcome the limitations of traditional dosimeters. In this regard, a deep understanding of the physicochemical basis of gel dosimetry, as one of the most promising tools for the evaluation of 3D high-spatial-resolution dose distributions, represents the starting point for developing new and innovative systems. This review aims to contribute thorough descriptions of the chemical processes and interactions that condition gel dosimetry outputs, often phenomenologically addressed, and particularly formulations reported since 2017.
RESUMO
Sexually-transmitted infections (STIs) are a global health concern worldwide as they cause acute diseases, infertility, and significant mortality. Among the bacterial, viral, and parasitic pathogens that can be sexually transmitted, human immunodeficiency virus (HIV) has caused one of the most important pandemic diseases, which is acquired immune deficiency syndrome (AIDS). 32.7 million people have died from AIDS-related illnesses since the start of the epidemic. Moreover, in 2019, 38 million people were living with HIV worldwide. The need to deal with this viral infection becomes more obvious, because it represents not only a problem for public health, but also a substantial economic problem. In this context, it is necessary to focus efforts on developing methods for prevention, detection and treatment of HIV infections that significantly reduce the number of newly infected people and provide a better quality of life for patients. For several decades, biomedical research has been developed allowing quick solutions through the contribution of effective tools. One of them is the use of polymers as vehicles, drug carrier agents, or as macromolecular prodrugs. Moreover, nanosystems (NSs) play an especially important role in the diagnosis, prevention, and therapy against HIV infection. The purpose of this work is to review recent research into diverse NSs as potential candidates for prevention and treatment of HIV infection. Firstly, this review highlights the advantages of using nanosized structures for these medical applications. Furthermore, we provide an overview of different types of NSs used for preventing or combating HIV infection. Then, we briefly evaluate the most recent developments associated with prevention and treatment alternatives. Additionally, the implications of using different NSs are also addressed.
Assuntos
Síndrome da Imunodeficiência Adquirida/prevenção & controle , Nanomedicina , Nanoestruturas/uso terapêutico , Síndrome da Imunodeficiência Adquirida/epidemiologia , Síndrome da Imunodeficiência Adquirida/transmissão , HumanosRESUMO
Ethylene glycol-based nanogels (NGs) have demonstrated their potential for the development of next-generation formulations for biomedical applications due to their interesting properties. In this work, monodispersed NGs based on oligo(ethylene glycol) methacrylates (OEG) were synthesized through free radical precipitation/dispersion polymerization assisted by ultrasonication. Di(ethylene glycol)methyl ether methacrylate (DEGMA) and oligo(ethylene glycol) methacrylate (OEGMA; Mn 475 g mol-1) were used as the main monomers, acrylic acid (AA) or itaconic acid (IA) as co-monomers (OEG-co-AA and OEG-co-IA, respectively) and tetraethylene glycol dimethacrylate (TEGDMA) as crosslinker. The physicochemical properties of OEG-co-AA and OEG-co-IA NGs were studied including hydrodynamic diameter, poly-dispersity index, zeta potential and pH/temperature responsiveness. Samples with 4 mol% of both AA and IA showed nanometric sizes. Regarding their thermo-responsiveness, unexpected differences between NGs with AA or with IA were observed. Besides, NGs did not impair the cell viability of a breast tumour cell line even when high concentrations were added to the culture medium. The properties of the synthetized NGs showed that either NGs with 4% AA or with 4% IA are outstanding candidates for biomedical applications.
RESUMO
Stimuli-responsive nanogels offer promising perspectives for the development of next generation formulations for biomedical applications. In this work, poly(N-vinylcaprolactam) nanogels were synthesized varying the concentration of monomer and crosslinking agent. Thus, the inhibitory effect of poly(N-vinylcaprolactam) nanogels against HIV-1 infection is presented for the first time. In particular, we have demonstrated that one of the synthesized poly(N-vinylcaprolactam) nanogels with initial concentration of 80 mg of vinylcaprolactam and 4% of crosslinking agent shows antiviral behavior against HIV-1 infection since this nanogel inhibits the viral replication in TZM.bl target cells.
Assuntos
Antivirais/farmacologia , Caprolactama/análogos & derivados , Sobrevivência Celular/efeitos dos fármacos , HIV-1/efeitos dos fármacos , Nanogéis/administração & dosagem , Polímeros/farmacologia , Replicação Viral/efeitos dos fármacos , Caprolactama/farmacologiaRESUMO
Magnetic nanogels (MNGs) are designed to have all the required features for their use as highly efficient trapping materials in the challenging task of selectively capturing circulating tumor cells (CTCs) from the bloodstream. Advantageously, the discrimination of CTCs from hematological cells, which is a key factor in the capturing process, can be optimized by finely tuning the polymers used to link the targeting moiety to the MNG. We describe herein the relationship between the capturing efficiency of CTCs with overexpressed transferrin receptors and the different strategies on the polymer used as linker to decorate these MNGs with transferrin (Tf). Heterobifunctional polyethylene glycol (PEG) linkers with different molecular weights were coupled to Tf in different ratios. Optimal values over 80% CTC capture efficiency were obtained when 3 PEG linkers with a length of 8 ethylene glycol (EG) units were used, which reveals the important role of the linker in the design of a CTC-sorting system.
RESUMO
Hybrid nanomaterials based on inorganic nanoparticles and polymers are highly interesting structures since they combine synergistically the advantageous physical-chemical properties of both inorganic and polymeric components, providing superior functionality to the final material. These unique properties motivate the intensive study of these materials from a multidisciplinary view with the aim of finding novel applications in technological and biomedical fields. Choosing a specific synthetic methodology that allows for control over the surface composition and its architecture, enables not only the examination of the structure/property relationships, but, more importantly, the design of more efficient nanodevices for therapy and diagnosis in nanomedicine. The current review categorizes hybrid nanomaterials into three types of architectures: core-brush, hybrid nanogels, and core-shell. We focus on the analysis of the synthetic approaches that lead to the formation of each type of architecture. Furthermore, most recent advances in therapy and diagnosis applications and some inherent challenges of these materials are herein reviewed.
RESUMO
Organic macromolecules with dendrimeric architectures are polymeric materials potentially useful as nanocarriers for therapeutic drugs. In this work, we evaluate a series of Newkome-type dendrons in Langmuir and Langmuir-Blodgett films as platforms capable of interacting with a potential antitumoral agent. The nanocomposite is proposed as model for the development of surface mediated drug delivery systems. We were successful in the formation and characterization of pure (dendrons) and composite (drug-dendron) stable and reproducible monolayers, and their transfer to solid substrates. A detailed study of topographic characteristics of the generated surfaces by atomic force microscopy was conducted. Furthermore, we probed dendron monolayer films as anchorage surfaces for mammalian cells. Normal cell attachment and proliferation on the surfaces were observed. No evident cytotoxic effects were detected, demonstrating the adequate biocompatibility of the surfaces.
Assuntos
Dendrímeros/química , Portadores de Fármacos/química , Nanoestruturas/química , Albendazol/química , Albendazol/toxicidade , Compostos de Anilina/química , Animais , Antineoplásicos/química , Antineoplásicos/toxicidade , Materiais Biocompatíveis/química , Adesão Celular , Proliferação de Células/efeitos dos fármacos , Humanos , Camundongos , Microscopia de Força Atômica , Células NIH 3T3 , Nitrobenzenos/química , Relação Estrutura-Atividade , Propriedades de SuperfícieRESUMO
The immense scope of variation in dendritic molecules (hyper-branching, nano-sized, hydrophobicity/hydrophilicity, rigidity/flexibility balance, etc.) and their versatile functionalization, with the possibility of multivalent binding, permit the design of highly improved, novel materials. Dendritic-based materials are therefore viable alternatives to conventional polymers. The overall aim of this work is to show the advantages of dendronization processes by presenting the synthesis and characterization of three different dendronized systems: (I) microbeads of functionalized chitosan; (II) nanostructuration of polypropylene surfaces; and (III) smart dendritic nanogels. The particular properties yielded by these systems could only be achieved thanks to the dendronization process.
Assuntos
Dendrímeros/química , Nanoestruturas/química , Polipropilenos/química , Quitosana/química , Interações Hidrofóbicas e Hidrofílicas , Polímeros , Propriedades de Superfície , Titânio/químicaRESUMO
The development and characterization of a novel, gel-type material based on a dendronized polymer (DP) loaded with ciprofloxacin (CIP), and the evaluation of its possible use for controlled drug release, are presented in this work. DP showed biocompatible and non-toxic behaviors in cultured cells, both of which are considered optimal properties for the design of a final material for biomedical applications. These results were encouraging for the use of the polymer loaded with CIP (as a drug model), under gel form, in the development of a new controlled-release system to be evaluated for topical administration. First, DP-CIP ionic complexes were obtained by an acid-base reaction using the high density of carboxylic acid groups of the DP and the amine groups of the CIP. The complexes obtained in the solid state were broadly characterized using FTIR spectroscopy, XRP diffraction, DSC-TG analysis and optical microscopy techniques. Gels based on the DP-CIP complexes were easily prepared and presented excellent mechanical behaviors. In addition, optimal properties for application on mucosal membranes and skin were achieved due to their high biocompatibility and acute skin non-irritation. Slow and sustained release of CIP toward simulated physiological fluids was observed in the assays (in vitro), attributed to ion exchange phenomenon and to the drug reservoir effect. An in vitro bacterial growth inhibition assay showed significant CIP activity, corresponding to 38 and 58% of that exhibited by a CIP hydrochloride solution at similar CIP concentrations, against Staphylococcus aureus and Pseudomonas aeruginosa, respectively. However, CIP delivery was appropriate, both in terms of magnitude and velocity to allow for a bactericidal effect. In conclusion, the final product showed promising behavior, which could be exploited for the treatment of topical and mucosal opportunistic infections in human or veterinary applications.
Assuntos
Antibacterianos/química , Ciprofloxacina/química , Dendrímeros/química , Portadores de Fármacos/química , Géis/química , Polímeros/química , Animais , Antibacterianos/metabolismo , Antibacterianos/farmacologia , Linhagem Celular , Sobrevivência Celular/efeitos dos fármacos , Ciprofloxacina/metabolismo , Ciprofloxacina/farmacologia , Portadores de Fármacos/toxicidade , Liberação Controlada de Fármacos , Humanos , Concentração de Íons de Hidrogênio , Íons/química , Testes de Sensibilidade Microbiana , Pseudomonas aeruginosa/efeitos dos fármacos , Coelhos , Reologia , Pele/efeitos dos fármacos , Espectroscopia de Infravermelho com Transformada de Fourier , Staphylococcus aureus/efeitos dos fármacosRESUMO
Hierarchical porous polymer systems are increasingly applied to catalysis, bioengineering, or separation technology because of the versatility provided by the connection of mesopores with percolating macroporous structures. Nuclear magnetic resonance (NMR) is a suitable technique for the study of such systems as it can detect signals stemming from the confined liquid and translate this information into pore size, molecular mobility, and liquid-surface interactions. We focus on the properties of water confined in macroporous polymers of ethylene glycol dimethacrylate and 2-hydroxyethyl methacrylate [poly(EGDMA-co-HEMA)] with different amounts of cross-linkers, in which a substantial variation of hydroxyl groups is achieved. As soft polymer scaffolds may swell upon saturation with determined liquids, the use of NMR is particularly important as it measures the system in its operational state. This study combines different NMR techniques to obtain information on surface interactions of water with hydrophilic polymer chains. A transition from a surface-induced relaxation in which relaxivity depends on the pore size to a regime where the organic pore surface strongly restricts water diffusion is observed. Surface affinities are defined through the molecular residence times near the network surface.
RESUMO
Evaporation kinetics of water confined in hierarchal polymeric porous media is studied by low field nuclear magnetic resonance (NMR). Systems synthesized with various degrees of cross-linker density render networks with similar pore sizes but different response when soaked with water. Polymeric networks with low percentage of cross-linker can undergo swelling, which affects the porosity as well as the drying kinetics. The drying process is monitored macroscopically by single-sided NMR, with spatial resolution of 100 µm, while microscopic information is obtained by measurements of spin-spin relaxation times (T2). Transition from a funicular to a pendular regime, where hydraulic connectivity is lost and the capillary flow cannot compensate for the surface evaporation, can be observed from inspection of the water content in different sample layers. Relaxation measurements indicate that even when the larger pore structures are depleted of water, capillary flow occurs through smaller voids.
RESUMO
NMR is a fast, nondestructive, and noninvasive technique that can provide information about the pore structure of macroporous polymer beads and the dynamics of liquids confined in them. In this work, we describe the study of the pore structure of the macroporous polymer of ethylene glycol dimethacrylate and 2-hydroxyethyl methacrylate [poly(EGDMA-co-HEMA)] in the dry but also in the swollen state by measuring relaxation times of liquids contained in the polymer network. The results show that the pore architecture differs from the dry to the soaked state. The behavior of polar liquids during evaporation and deswelling dynamics is monitored and described. An internal migration of water from the swollen polymer mesh into expanding pores takes place. With this procedure it is possible to obtain information about the microscopic morphology behavior of the matrix during evaporation and deswelling. This information is of great interest with the aspect of possible and future applications for these types of materials.
RESUMO
Surface topography and work function maps were simultaneously obtained for carbon surfaces modified by a dendritic molecule: 3,5-Bis (3,5-dinitrobenzoylamino) benzoic acid. The dendrons were spontaneously assembled onto highly ordered pyrolytic graphite samples, exhibiting an increase in the surface potential. This fact is consistent with the incorporation of an electron-acceptor functional group that remains electroactive on the surface.
Assuntos
Benzoatos/química , Dendrímeros/química , Grafite/química , Microscopia de Força Atômica , Nanoestruturas/química , Propriedades de SuperfícieRESUMO
We reported herein the study and characterization of films obtained by casting of chitosan solutions in perfluorinated acids, trifluoroacetic (TFA), perfluoropropionic (PFPA), and perfluorooctanoic (PFOA). The films were characterized by FTIR, solid state (13)C NMR, X-ray, AFM, contact angle, thermogravimetric effluent analysis by mass spectrometry, and rheology. The results showed a marked influence of chain length of the perfluorinated acids on the hydrophobic/hydrophilic ratio of the modified chitosan films which was evidenced by the different characteristics observed. The material that showed greater surface stability was chitosan-PFOA. Chitosan film with the addition of PFOA modifier became more hydrophobic, thus water vapor permeability diminished compared to chitosan films alone, this new material also depicted bacterial adhesion which, together with the features already described, proves its potential in applications for bioreactor coating.
Assuntos
Ácidos/farmacologia , Aderência Bacteriana/efeitos dos fármacos , Quitosana/farmacologia , Fluorocarbonos/farmacologia , Pseudomonas aeruginosa/fisiologia , Caprilatos/farmacologia , Linhagem Celular Tumoral , Contagem de Colônia Microbiana , Módulo de Elasticidade/efeitos dos fármacos , Humanos , Espectroscopia de Ressonância Magnética , Viabilidade Microbiana/efeitos dos fármacos , Microscopia de Força Atômica , Peso Molecular , Pseudomonas aeruginosa/efeitos dos fármacos , Pseudomonas aeruginosa/crescimento & desenvolvimento , Reologia/efeitos dos fármacos , Termodinâmica , Termogravimetria , Ácido Trifluoracético/farmacologia , Difração de Raios XRESUMO
Acid functional hydrogels are a type of materials with many advantages. Over the last years, increasing attention for the synthesis of dendronized polymers has been drawn due to their unique properties of high multivalence in the same surface as compared with conventional polymers. In this study, we report the preparation of novel acid dendronized hydrogels using a dendritic monomer obtained from Behera's amine. The swelling and rheological performance, the non-toxicity over fibroblast cells and the drug encapsulation capacity of the novel hydrogels suggests that the new materials can achieve great potential as carrier for drug delivery and other potential biomedical applications.
Assuntos
Dendrímeros/química , Sistemas de Liberação de Medicamentos/métodos , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Animais , Sobrevivência Celular , Dendrímeros/síntese química , Fibroblastos/citologia , Humanos , Hidrogel de Polietilenoglicol-Dimetacrilato/síntese química , Concentração de Íons de Hidrogênio , Cinética , Espectroscopia de Ressonância Magnética , Polimerização , Polímeros/química , Prótons , ReologiaRESUMO
In this work, a dendronization strategy was used to control interparticle spacing and the optical properties of gold nanoparticle (NP) aggregates in aqueous media. To achieve this goal, two dendritic disulfides bearing different functionalities on their periphery were synthesized and used as ligands to dendronize gold NPs. The dendronized NPs then undergo aggregation; this process was followed by UV-vis spectroscopy, dynamic light scattering (DLS), and transmission electronic microscopy (TEM) measurements and correlated with Generalized Mie Theory electrodynamics calculations. For comparison, NP functionalization was also studied using a nondendritic ligand. It was found that the use of dendritic disulfides allows for the preparation of controlled NP aggregates. This study demonstrates how different dendronization parameters, such as disulfide concentration, temperature, time and nature of the ligand (dendritic vs nondendritic), determine the control exerted over the size and stability of the NP aggregates.
RESUMO
We investigated the nature and stability of the interactions established between polyquaternium (PQ10) and perfluorodecanoic acid (PFDA) in terms of different variables such as composition, ionic strength, pH and temperature. The PQ10-PFDA complex formation is interpreted in view of electrostatic associations between carboxylic and quaternary amino group. The properties of the systems were characterized by rheology analysis. The adhesive properties of complex were also assessed. One of the macroscopic features of the new material formed in solution was the increase in viscosity from 6 Pas for 1% PQ10 (MW 1.7×10(6) g mol(-1)) to about 1000 Pas by the addition of enough PFDA to reach 1:0.5 ammonium:carboxylic group molar ratio. At this proportion, PQ10 and PFDA form a network structure with a maximum viscosity and storage modulus. This maximum coincides with an increased mucoadhesive work.