RESUMO
The effect of different microaeration flow rates and dosing points, and of effluent recirculation, on microaerobic BTEX degradation in an anaerobic bioreactor was assessed. Additionally, a sensitivity and recovery analysis for this system was performed during microaeration failure simulations. Under anaerobic conditions, BTEX removal efficiencies between 55 and 82% were achieved depending on the compound, being benzene the most recalcitrant one. Microaeration (0.5-2.0â¯mL air min-1) ensured high removal efficiencies (>83%) for all compounds, and the best results were obtained for the flow rate of 1.0â¯mL air min-1, particularly for benzene, with a 30% increase in its removal efficiency. Effluent recirculation showed to be an important factor to improve mass transfer and, consequently, BTEX removal. Volatilization was negligible even under microaerobic conditions, suggesting that microbial activity was the main removal mechanism. Finally, after microaeration shutdown periods, the bioreactor could recover its prior performance within up to 2 days.