RESUMO
In this work, we consider the design of power-constrained networked control systems (NCSs) and a differential entropy-based fault-detection mechanism. For the NCS design of the control loop, we consider faults in the plant gain and unstable plant pole locations, either due to natural causes or malicious intent. Since the power-constrained approach utilized in the NCS design is a stationary approach, we then discuss the finite-time approximation of the power constraints for the relevant control loop signals. The network under study is formed by two additive white Gaussian noise (AWGN) channels located on the direct and feedback paths of the closed control loop. The finite-time approximation of the controller output signal allows us to estimate its differential entropy, which is used in our proposed fault-detection mechanism. After fault detection, we propose a fault-identification mechanism that is capable of correctly discriminating faults. Finally, we discuss the extension of the contributions developed here to future research directions, such as fault recovery and control resilience.
RESUMO
With the growing need to obtain information about power consumption in buildings, it is necessary to investigate how to collect, store, and visualize such information using low-cost solutions. Currently, the available building management solutions are expensive and challenging to support small and medium-sized buildings. Unfortunately, not all buildings are intelligent, making it difficult to obtain such data from energy measurement devices and appliances or access such information. The internet of things (IoT) opens new opportunities to support real-time monitoring and control to achieve future smart buildings. This work proposes an IoT platform for remote monitoring and control of smart buildings, which consists of four-layer architecture: power layer, data acquisition layer, communication network layer, and application layer. The proposed platform allows data collection for energy consumption, data storage, and visualization. Various sensor nodes and measurement devices are considered to collect information on energy use from different building spaces. The proposed solution has been designed, implemented, and tested on a university campus considering three scenarios: an office, a classroom, and a laboratory. This work provides a guideline for future implementation of intelligent buildings using low-cost open-source solutions to enable building automation, minimize power consumption costs, and guarantee end-user comfort.