RESUMO
The influence of processing intumescent bio-based poly(lactic acid) (PLA) composites by injection and fused filament fabrication (FFF) was evaluated. A raw (ANa) and two acidic-activated (AH2 and AH5) montmorillonites were added to the intumescent formulation, composed by lignin and ammonium polyphosphate, in order to evaluate the influence of the strength and the nature (Brønsted or Lewis) of their acidic sites on the fire behavior of the composites. The thermal stability and the volatile thermal degradation products of the composites were assessed. The injected and 3D-printed composites were submitted to cone calorimeter (CC), limit oxygen index (LOI), and UL-94 flammability tests. A similar tendency was observed for the injected and 3D-printed samples. The high density of strong Lewis sites in AH2 showed to be detrimental to the fire-retarding properties. For the CC test, the addition of the intumescent composite reduced the peak of heat released (pHRR) in approximately 49% when compared to neat PLA, while the composites containing ANa and AH5 presented a reduction of at least 54%. However, the addition of AH2 caused a pHRR reduction of around 47%, close to the one of the composite without clay (49%). In the LOI tests, the composites containing ANa and AH5 achieved the best results: 39% and 35%, respectively, for the injected samples, and 35 and 38% for the 3D-printed samples. For the composite containing AH2 the LOI values were 34% and 32% for injected and 3D-printed samples, respectively. Overall, the best performance in the flammability tests was achieved by the composites containing clays with only weak and moderate strength acidic sites (ANa and AH5).
RESUMO
A raw montmorillonite (Mt) was submitted to different acidic activation times in order to investigate the influence of the strength and the nature (Brønsted and Lewis) of acidic sites on the synergistic action with an intumescent formulation (IF) composed of ammonium polyphosphate (APP) and pentaerythritol (PER) when incorporated into a polypropylene (PP) matrix. The acidity of the Mt samples was quantified by ammonia temperature-programmed desorption (TPD-NH3) and Fourier transform infrared spectroscopy (FTIR) with pyridine adsorption. The mineral clays were also characterized by X-ray fluorescence (XRF), X-ray diffraction (XRD), nitrogen adsorption analysis and particle size distribution. Thermogravimetric analysis (TGA), limit oxygen index (LOI) and UL-94 were performed to evaluate the flame-retardant properties and the thermal stability. The TGA results show that the final residue increased 2 to 3 fold in comparison to the values predicted theoretically. The flammability properties achieved a maximum for the system containing an excess of moderate-strength Brønsted sites relative to the Lewis ones, reaching 38% in the LOI test. This result suggests that the presence of these Brønsted acidic sites is important, as they take part in the esterification reaction between APP and PER which gives rise to the char formation. The FTIR-Pyr adsorption and flammability results indicate that both the nature and strength of the acidic sites influence the flame-retardant properties.
RESUMO
RATIONALE: The study of natural products by electrospray ionization tandem mass spectrometry (ESI-MS/MS) is an important strategy for the characterization of the major fragmentation reactions which can then help to determine the composition of complex mixtures. Application of ESI-MS/MS to a series of isopimarane diterpenes from Velloziaceae allowed the rationalization of their fragmentation mechanisms. METHODS: Velloziaceae diterpenes were isolated by silica gel column chromatography and investigated by ESI-MS/MS analysis. The fragmentation studies were performed on a quadrupole-time-of-flight instrument using N2 as the collision gas. To help rationalize the fragmentation pathways observed, the geometry and sites of reactivity of the diterpenes were obtained by theoretical calculations using the B3LYP/6-31 + G(d,p) model. Fragmentation mechanisms were proposed on the basis of the calculated protonation sites and product ions energies using density functional theory (DFT) methods. RESULTS: The presence of hydroxyl and carbonyl groups on the terpene core influences the protonation site observed. One compound showed a radical cation as the base peak. MS/MS spectra exhibit water elimination as the major fragmentation pathway (via two ways), either when protonation takes place on the oxygen atom, or through elimination after activation from hydrogen migration. After the elimination of water, the formation of an endocyclic double bond induces a sequential retro-Diels-Alder (RDA) reaction as the major fragmentation step. CONCLUSIONS: A thorough rational analysis of the fragmentation mechanisms of protonated Velloziaceae diterpenes was used to propose the dissociation mechanisms in ESI-MS/MS. The presence of esters in the side chain also influenced the intensity or occurrence of the observed protonated or cationized molecules in ESI-MS. These results will aid the identification of analogues in sample extracts in future metabolomics studies.