RESUMO

Aim: Benznidazole (BNZ), a class-II drug, is the primary treatment for Chagas disease, but its low aqueous solubility presents challenges in formulation and efficacy. Nanosuspensions (NS) could potentially address these issues.Methods: BNZ-NS were prepared using a simple, organic solvents-free nano-milling approach. Physicochemical characterizations were conducted on both NS and lyophilized solid-state BNZ-nanocrystals (NC).Results: BNZ-NS exhibited particle size <500 nm, an acceptable polydispersity index (0.23), high Z-potential, and physical stability for at least 90 days. BNZ-NC showed tenfold higher solubility than pure BNZ. Dissolution assays revealed rapid BNZ-NS dissolution. BNZ-NC demonstrated biocompatibility on an eukaryotic cell and enhanced BNZ efficacy against trypomastigotes of Trypanosoma cruzi.Conclusion: BNZ-NS offers a promising alternative, overcoming limitations associated with BNZ for optimized pharmacotherapy.

[Box: see text].

Assuntos

RESUMO

3D printing technology is revolutionizing pharmaceuticals, offering tailored solutions for solid dosage forms. This innovation is particularly significant for conditions like Chagas disease, which require weight-dependent treatments. In this work, a formulation of benznidazole (BNZ), the primary treatment for this infection, was developed to be utilized with the Melting Solidification Printing Process (MESO-PP) 3D printing technique. Considering the limited aqueous solubility of BNZ, an interpolyelectrolyte complex (IPEC), composed of chitosan and pectin, was integrated to improve its dissolution profile. The formulations, also called inks in this context, with and without IPEC were integrally characterized and compared. The printing process was studied, the release of BNZ from 3D-prints (3DP) was exhaustively analyzed and a physiologically based pharmacokinetic model (PKPB) was developed to forecast their pharmacokinetic performance. 3DP were successfully achieved loading 25, 50 and 100 mg of BNZ. The presence of the IPEC in the ink caused a decrease in the crystalline domain of BNZ and facilitated the printing process, reaching a print success rate of 83.3 %. Interestingly, 3DP-IPEC showed accelerated release dissolution profiles, releasing over 85 % of BNZ in 90 min, while 3DP took up to 48 h for doses above 25 mg. The PBPK model demonstrated that 3DP-IPEC tablets would present high bioavailability (0.92), higher than 3DP (0.36) and similar to the commercial product. This breakthrough holds immense potential for improving treatment outcomes for neglected diseases.

Assuntos

RESUMO

Increasing the solubility of drugs is a recurrent objective of pharmaceutical research, and one of the most widespread strategies today is the formulation of nanocrystals (NCs). Beyond the many advantages of formulating NCs, their incorporation into solid dosage forms remains a challenge that limits their use. In this work, we set out to load Atorvastatin NCs (ATV-NCs) in a delivery device by combining 3D scaffolds with an "in situ" loading method such as freeze-drying. When comparing two infill patterns for the scaffolds at two different percentages, the one with the highest NCs load was chosen (Gyroid 20 % infill pattern, 13.8 ± 0.5 mg). Colloidal stability studies of NCs suggest instability in acidic media, and therefore, the system is postulated for use as a sublingual device, potentially bypassing stomach and hepatic first-pass effects. An ad hoc dissolution device was developed to mimic the release of actives. The nanometric size and properties acquired in the process were maintained, mainly in the dissolution rate and speed, achieving 100 % dissolution of the content in 180 s. Based on these results, the proof of concept represents an innovative approach to converting NCs suspensions into solid dosage forms.

Assuntos

RESUMO

The challenge of low water solubility in pharmaceutical science profoundly impacts drug absorption and therapeutic effectiveness. Nanocrystals (NC), consisting of drug molecules and stabilizing agents, offer a promising solution to enhance solubility and control release rates. In the pharmaceutical industry, top-down techniques are favored for their flexibility and cost-effectiveness. However, increased solubility can lead to premature drug dissolution in the stomach, which is problematic due to the acidic pH or enzymes. Researchers are exploring encapsulating agents that facilitate drug release at customized pH levels as a valuable strategy to address this. This study employed wet milling and spray drying techniques to create encapsulated NC for delivering the drug to the intestinal tract using the model drug ivermectin (IVM). Nanosuspensions (NS) were efficiently produced within 2 h using NanoDisp®, with a particle size of 198.4 ± 0.6 nm and a low polydispersity index (PDI) of 0.184, ensuring uniformity. Stability tests over 100 days at 4 °C and 25 °C demonstrated practical viability, with no precipitation or significant changes observed. Cytotoxicity evaluations indicated less harm to Caco-2 cells compared to the pure drug. Furthermore, the solubility of the NC increased by 47-fold in water and 4.8-fold in simulated intestinal fluid compared to the pure active compound. Finally, dissolution tests showed less than 10% release in acidic conditions and significant improvement in simulated intestinal conditions, promising enhanced drug solubility and bioavailability. This addresses a long-standing pharmaceutical challenge in a cost-effective and scalable manner.

Assuntos

RESUMO

Atorvastatin (ATV) is a first-line drug for the treatment of hyperlipidemia. This drug presents biopharmaceutical problems, partly due to its low solubility and dissolution rate. In this work, nanocrystals of ATV stabilized with Tween 80® were designed by wet milling. A full factorial design was applied to optimize the process. Additionally, a cryoprotectant agent (maltodextrin, MTX) was identified, which allowed maintaining the properties of the nanocrystals after lyophilization. The storage stability of the nanocrystals was demonstrated for six months in different conditions. The obtained nanocrystal powder was characterized using SEM, EDXS, TEM, DSC, TGA, FT-IR, and XRD, showing the presence of irregular crystals with semi-amorphous characteristics, likely due to the particle collision process. Based on the reduction in particle size and the decrease in drug crystallinity, a significant increase in water and phosphate buffer (pH 6.8) solubility by 4 and 6 times, respectively, was observed. On the other hand, a noticeable increase in the dissolution rate was observed, with 90 % of the drug dissolved within 60 min of study, compared to 30 % of the drug dissolved within 12 h in the case of the untreated drug or the physical mixture of components. Based on these results, it can be concluded that the nano-milling of Atorvastatin stabilized with Tween 80® is a promising strategy for developing new formulations with improved biopharmaceutical properties of this widely used drug.

Assuntos

RESUMO

OBJECTIVE AND SIGNIFICANCE: This research aims to design and develop a pilot plant-type pharmaceutical reactor with a strong focus on its volumetric capacity and heat transfer capabilities. The primary goal is to replicate design and control strategies at the laboratory or pilot scale to analyze and produce generic semisolid formulations. METHODS: Computational fluid dynamics and heat transfer modeling, utilizing the finite volume method, were employed to determine the reactor's performance and particle trajectory during the mixing and stirring. This allowed for the establishment of optimal operational parameters and variables. Furthermore, prototypes were constructed at 1:2.5 and 1:15 scales to examine the reactor's morphology, ensure volumetric versatility, and conduct mixing, homogenization, and coloration tests using varying volumes. RESULTS AND CONCLUSIONS: The outcomes of this study yielded a versatile reactor suitable for processing pharmaceutical semisolids at both laboratory and pilot-scale volumes. Notably, the reactor demonstrated exceptional volumetric capacity within a single vessel while effectively facilitating heat transfer to its interior.

Assuntos

RESUMO

Niclosamide (NICLO) is a recognized antiparasitic drug being repositioned for Helicobacter pylori. The present work aimed to formulate NICLO nanocrystals (NICLO-NCRs) to produce a higher dissolution rate of the active ingredient and to incorporate these nanosystems into a floating solid dosage form to release them into the stomach slowly. For this purpose, NICLO-NCRs were produced by wet-milling and included in a floating Gelucire l3D printed tablet by semi-solid extrusion, applying the Melting solidification printing process (MESO-PP) methodology. The results obtained in TGA, DSC, XRD and FT-IR analysis showed no physicochemical interactions or modifications in the crystallinity of NICLO-NCR after inclusion in Gelucire 50/13 ink. This method allowed the incorporation of NICLO-NCRs in a concentration of up to 25% w/w. It achieved a controlled release of NCRs in a simulated gastric medium. Moreover, the presence of NICLO-NCRs after redispersion of the printlets was observed by STEM. Additionally, no effects on the cell viability of the NCRs were demonstrated in the GES-1 cell line. Finally, gastroretention was demonstrated for 180 min in dogs. These findings show the potential of the MESO-PP technique in obtaining slow-release gastro-retentive oral solid dosage forms loaded with nanocrystals of a poorly soluble drug, an ideal system for treating gastric pathologies such as H. pylori.

RESUMO

Domperidone (DOM) is a drug commonly used to treat nausea and vomiting, as well as gastrointestinal disorders. However, its low solubility and extensive metabolism pose significant administration challenges. In this study, we aimed to improve DOM solubility and avoid its metabolism by developing nanocrystals (NC) of DOM through a 3D printing technology-melting solidification printing process (MESO-PP)-to be delivered via a solid dosage form (SDF) that can be administered sublingually. We obtained DOM-NCs using the wet milling process and designed an ultra-rapid release ink (composed of PEG 1500, propylene glycol, sodium starch glycolate, croscarmellose sodium, and sodium citrate) for the 3D printing process. The results demonstrated an increase in the saturation solubility of DOM in both water and simulated saliva without any physicochemical changes in the ink as observed by DSC, TGA, DRX, and FT-IR. The combination of nanotechnology and 3D printing technology enabled us to produce a rapidly disintegrating SDF with an improved drug-release profile. This study demonstrates the potential of developing sublingual dosage forms for drugs with low aqueous solubility using nanotechnology and 3D printing technology, providing a feasible solution to the challenges associated with the administration of drugs with low solubility and extensive metabolism in pharmacology.

RESUMO

The use of 3D printing for the production of systems intended for oral delivery of diet supplements in the veterinary pharmacy constitutes an attractive technology that has remained unexplored. In this sense, this work studies the design and 3D printing of capsular devices that allow the modified release of urea, which is frequently used as a source of non-protein nitrogen in ruminants, but highly toxic if fast ingested. The devices were printed with combinations of polylactic acid (PLA, water-insoluble) and polyvinyl alcohol (PVA, water-soluble) in order to modulate the urea release through the different parts. The optimization of the designs as well as printing parameters such as extrusion temperature, printing speed, retraction distance and nozzle speed resulted critical to obtain successful capsular devices. In addition, the dissolution studies confirmed that the developed designs showed a controlled release of urea, especially the ones that presented internal partitions. Finally, Logistic and Weibull equations were the kinetic models that best fitted the experimental data corresponding to functions that describe S-shaped dissolution profiles. Overall, this work constitutes a proof of concept and provides the first steps in the development of 3D printed simple devices for the controlled release of supplements and drugs in veterinary pharmacy.

Assuntos

RESUMO

PURPOSE: 3D printing (3DP) makes it possible to obtain systems that are not achievable with current conventional methods, one of them, sustained release floating systems. Floating systems using ricobendazole (RBZ) as a model drug and a combination of polymers were designed and obtained by melt solidification printing technique (MESO-PP). METHODS: Four different MESO-PP inks were formulated based on combinations of the polymers Gelucire 43/01 and Gelucire 50/13 in different ratios. For each of the formulated inks, physicochemical characterization was performed by thermal analysis (thermogravimetric analysis [TGA] and differential scanning calorimetry [DSC]), fourier transform infrared spectrophotometer (FTIR) and X-ray diffraction (XRD). Pharmaceutical characterization was performed by in vitro assays to determine pharmaceutically relevant parameters. These parameters were calculated by applying mathematical models developed to evaluate in vitro drug release profiles. On the other hand, a physiologically based pharmacokinetic (PBPK) model was developed to predict the in vivo performance of RBZ loaded in the different inks by determining the Cmax, and the AUC0-∞. RESULTS: By increasing the proportion of Gelucire 50/13 co-surfactant in the mixtures (the proportion in Ink 1 was 33%, while the proportion in Ink 4 was 80%), the dissolution capacity of RBZ increases substantially, decreasing flotation times. CONCLUSION: MESO-PP produced ink 1 (50% Gelucire 43/01, 25% Gelucire 50/13 and 25% RBZ), which has a zero-order release (RR = 0.180%/min) and the longest flotation time (545 ± 23 min), and in turn would produce a significant increase in oral absorption of the drug, with an AUC0-∞ 2.16-fold higher than that obtained in animals treated with RBZ loaded in conventional tablets.

Assuntos

RESUMO

This is the first report on the inclusion of nanocrystals (NCs) within 3D-printed oral solid dosage forms -3D-printed tablets or printlets- produced by the Melting Solidification Printing Process (MESO-PP) 3D printing technique. This method allowed the incorporation of albendazole (ABZ) nanocrystals in a concentration of up to 50% w/w, something not achieved in conventional tablets. An ink of PEG 1500/propylenegycol was used as a carrier and no physicochemical interactions or crystallinity modifications were observed due to the inclusion of ABZ-NCs into the ink, as demonstrated by TGA, DSC, XRD and FT-IR. In particular, the relative crystallinity of the ink loaded with NCs was 97.8% similar to the physical mixture of the components. Moreover, the presence of NCs was observed in the surface and matrix of the printlets by SEM. In addition, the printlet NCs demonstrated to be more effective than NCs included in hard gelatin capsules in improving drug dissolution in HCl 0.1 N. The particle size, crystallinity and chemical stability of the nanocrystals was maintained before and after 180 days of storage. Thus, these findings exhibit relevant pharmaceutical potential for developing stable, fast-release, oral, solid dosage forms of poorly soluble drugs combining 3D printing and nanocrystals. Additionally, this technique could be applied for printing objects using different types of nanocrystals embedded in low melting temperature polymers.

Assuntos

RESUMO

Introducción: el cáncer es una de las primeras causas de muerte mundial; en 2012 representó 8.2 millones de muertes. En México, a pesar de que la incidencia de cáncer de próstata es tres veces menor que lo observado en Estados Unidos, la mortalidad por esta causa es prácticamente igual (11.3 vs 9.8 muertes por cada 100,000 hombres) y representa la primera causa de cáncer y mortalidad por cáncer en hombres, por lo que es de vital importancia la prevención y para ello se debe promover el conocimiento de esta afección. Objetivo: identificar el nivel de conocimientos sobre la prevención del cáncer de próstata en hombres de 40 a 65 años de la Unidad de Medicina Familiar No. 51. Metodología: estudio descriptivo transversal. Se aplicó un cuestionario validado (alfa de Cronbach de 0.8) sobre las medidas preventivas del cáncer prostático a 204 derechohabientes masculinos de la unidad. Resultados: el grado de conocimientos sobre la prevención del cáncer de próstata es bajo en el 66% de los casos, me- dio en el 31% y alto en el 3%; el 78.9% de los participantes corresponde a casados, el 51.5% tiene grado de estudios de preparatoria o superior y el 47.1% es obrero. Conclusiones: el bajo grado de conocimientos en la prevención del cáncer prostático muestra un área de oportunidad de mejorar si se difunde a edades tempranas.

Introduction: Cancer is one of the leading causes of death worldwide; in 2012, 8.2 million deaths were attributed to it. In Mexico, despite the fact that the incidence of prostate cancer is three times lower than that observed in the United States, mortality from this cause is practically the same (11.3 vs. 9.8 deaths per 100 000 men) and represents the first cause of cancer and cancer mortality in men, which is why prevention is of vital importance, and for this, knowledge about the pathology must be promoted. Objective: To identify the level of knowledge about the pre- vention of prostate cancer in men between 40 and 65 years from the Family Medicine Unit No. 51. Methodology: Descriptive cross-sectional study. A validated questionnaire (Cronbach's alpha of 0.8) on preventive measures of prostate cancer was applied to 204 male beneficiaries from the aforementioned unit. Results: The level of knowledge about the prevention of prostate cancer is low in 66% of the cases, medium in 31% and high in 3%; 78.9% are married, 51.5% have a high school education level or higher and 47.1% are workers. Conclusions: The low level of knowledge of prostate cancer prevention shows an area of opportunity for improvement with a greater emphasis on early ages.

Assuntos

RESUMO

This paper describes a melting solidification printing process (MESO-PP) capable of obtaining printed oral solid dosage forms in a safe, versatile, and robust manner avoiding the use of solvents and high temperatures. MESO-PP and Gelucire® 50/13 (fatty polyethylene glycol esters) as ink can be used to obtain a floating sustained-release system with the aim of improving the dissolution and absorption of drugs, such as ricobendazole (RBZ), which have a low and erratic bioavailability. Gelucire 50/13 can be considered a good material to formulate inks using MESO-PP. As a model, the RBZ allowed us to assess that there were no changes in crystallinity and the API-ink interactions were ruled out using TGA, DSC, XRD and FT-IR assays. A batch of printlets, obtained using MESO-PP, fulfilled USP requirements regarding uniformity of mass (827 ± 9 mg) and drug content (211 ± 5 mg). Hardness and friability were 39.23 ± 9.65 N and 1.07 ± 0.5% respectively, just above the 1% USP tablet-friability limit. It was possible to obtain tablets of different sizes with high precision (r2 = 0.995). In vitro dissolution test showed that the printlet had a sustained-release of RBZ (only 7% after 15 min), that erosion was the predominant mechanism for drug release (n-value of Korsmeyer-Peppas equation = 0.991; r2 = 0.99) and that changes in the internal structures modify the release. Consequently, MESO-PP can be considered an excellent alternative to obtain solid pharmaceutical dosage forms with variable geometries for different pharmaceutical applications.

Assuntos

RESUMO

Introduction: Pseudoexfoliation Syndrome (PEX) is a genetic-inherited disorder, consisting of the deposition of elastin microfibers in intra and extraocular tissue. PEX is one of the most common identifiable secondary causes of glaucoma. Several studies have associated PEX with systemic conditions and the finding of fibrillar material in the structures of the inner ear, similar to that of pseudoexfoliation detected in the eye, has been described. Objective: to compare audiometric levels in patients with and without ocular PEX. Materials and Methods: Retrospective case-control study. 48 medical records of patients who attended the ophthalmology service of the Private Hospital of Córdoba were selected between January 2015 and December 2017, between 59 and 75 years. They were divided into groups: controls (n = 22): without PEX and cases (n = 26): with PEX. The medical records of patients who underwent ophthalmological and audiometric studies were analyzed. For the statistical analysis, the Student's T test was used for independent and paired samples; in all cases a level of significance ≤ 0.05 was considered. Results: The percentage of hearing loss was 56.8% in the control group and 82.7% in the PEX group. The percentage disability in the group with PEX was greater in monaural (p = 0.0008) and biaural (p = 0.0307) hearing compared to patients without PEX. Conclusion: Patients with ocular PEX showed a higher percentage of hearing loss, compared to those patients without ophthalmic evidence of PEX.

Introducción: El Síndrome de Pseudoexfoliación (PEX) es un trastorno genético-hereditario, consiste en el depósito de microfibras de elastina en tejido intra y extraocular. El PEX es una de las causas secundarias identificables más comunes del glaucoma. Varios estudios han asociado el PEX con afecciones sistémicas y se ha descripto el hallazgo de material fibrilar en las estructuras del oído interno, similares al de pseudoexfoliación detectado en el ojo. Objetivo: comparar los niveles de audiométricos en pacientes con y sin PEX ocular. Materiales y Métodos: Estudio retrospectivo de casos y controles. Se seleccionaron 48 historias clínicas de pacientes que asistieron al servicio de oftalmología del Hospital Privado de Córdoba, entre enero del 2015 y diciembre de 2017, de entre 59 y 75 años. Se los dividió en grupos: controles (n=22): sin PEX y casos (n=26): con PEX. Se analizaron las historias clínicas de pacientes a los que se les realizaron estudios oftalmológicos y audiométricos. Para el análisis estadístico se utilizó el test T de Student para muestras independientes y apareadas; en todos los casos se consideró un nivel de significación ≤ 0.05. Resultados: El porcentaje de pérdida auditiva fue del 56,8% en el grupo control y un 82,7% en el grupo PEX. La incapacidad porcentual en el grupo con PEX fue mayor en la audición monoaural (p=0,0008) y biaural (p=0,0307) con respecto a los pacientes sin PEX. Conclusión: Los pacientes con PEX ocular mostraron un porcentaje mayor de hipoacusia, en comparación con aquellos pacientes sin evidencia oftalmológica de PEX.

Assuntos

RESUMO

Allogeneic stem cell transplant (alloSCT) is a current treatment option for patients with refractory/relapsed classic Hodgkin lymphoma (CHL), including those who have failed an autologous transplantation. We performed a retrospective multicenter analysis of 113 patients (median age 28 years; range 14-56; 54% males) with refractory/relapsed (R/R) CHL who had undergone alloSCT in Argentina. Kaplan-Meier was used to estimate overall (OS) and progression-free survival (PFS). Relapse rate (RR) and non-relapse mortality (NRM) were estimated with cumulative incidence analysis. Disease status at transplant was complete remission (CR) in 39%, partial remission (PR) in 44%, and stable/progressed disease (S/PD) in 17% of the patients. Donor type was matched related (MRD) in 60%, unrelated (URD) in 19%, and haploidentical (HID) in 21% of the patients. OS and PFS at 2 years were 43% and 27%, respectively, for all the cohort. In the univariate analysis, patients in CR showed better OS (p ≤ 0.001) and PFS (p ≤ 0.001), and lower NRM (p = 0.04). HID had better PFS (p = 0.04) and lower RR (p = 0.02). In the multivariate analysis, CR showed a significant impact on OS and PFS, and HID on PFS. AlloSCT is a feasible procedure in patients with CHL. Those in CR at the time of the transplant had better outcomes. Haploidentical transplantation is associated with better PFS in these patients with poor prognosis.

Assuntos

RESUMO

There are few case reports of cases of carotid and aortic dissection related to the ergotamine abuse, but the cases that affect the coronary arteries is a very rare coronary. We present a patient of a 48-year-old female with an ST-segment elevation myocardial infarction attributable to chronic ergotamine use. The coronary angiography showed dissection of right coronary artery proximal.

Assuntos

Assuntos

RESUMO

One of the most significant health problems in the American continent in terms of human health, and socioeconomic impact is Chagas disease, caused by the protozoan parasite Trypanosoma cruzi. Infection was originally transmitted by reduviid insects, congenitally from mother to fetus, and by oral ingestion in sylvatic/rural environments, but blood transfusions, organ transplants, laboratory accidents, and sharing of contaminated syringes also contribute to modern day transmission. Likewise, Chagas disease used to be endemic from Northern Mexico to Argentina, but migrations have earned it global. The parasite has a complex life cycle, infecting different species, and invading a variety of cells - including muscle and nerve cells of the heart and gastrointestinal tract - in the mammalian host. Human infection outcome is a potentially fatal cardiomyopathy, and gastrointestinal tract lesions. In absence of a vaccine, vector control and treatment of patients are the only tools to control the disease. Unfortunately, the only drugs now available for Chagas' disease, Nifurtimox and Benznidazole, are relatively toxic for adult patients, and require prolonged administration. Benznidazole is the first choice for Chagas disease treatment due to its lower side effects than Nifurtimox. However, different strategies are being sought to overcome Benznidazole's toxicity including shorter or intermittent administration schedules-either alone or in combination with other drugs. In addition, a long list of compounds has shown trypanocidal activity, ranging from natural products to specially designed molecules, re-purposing drugs commercialized to treat other maladies, and homeopathy. In the present review, we will briefly summarize the upturns of current treatment of Chagas disease, discuss the increment on research and scientific publications about this topic, and give an overview of the state-of-the-art research aiming to produce an alternative medication to treat T. cruzi infection.

Assuntos

RESUMO

PURPOSE: To explore decline in visual acuity in patients with neovascular age-related macular degeneration (n-AMD) awaiting intravitreal bevacizumab or ranibizumab treatment following initial diagnosis and after disease reactivation. METHODS: Retrospective analysis of 74 treatment-naïve patients (84 eyes) in two centers in Córdoba, Argentina. The time between treatment indication and intravitreal injection, and the changes in BCVA produced during this delay were studied in both periods. A linear regression model to search the impact of time on progression visual impairment was conducted. RESULTS: In both periods, a significant reduction in vision occurred awaiting intravitreal injection. The longer the delay, the greater the vision loss (R2 = 0.55 p < 0.01) and the less improvement following treatment (Pearson coefficient -0.26). The result of the model shows that the change in vision as a function of initial delay were best described by a polynomic model with a mean loss of 5 letters in the first 3 weeks, a slowdown in the rate of change of VA, and a dependence of visual acuity at the moment of diagnosis . The loss of visual acuity after reactivation shows the same behavior as at the onset of the disease but independent of visual acuity prior to reactivation. CONCLUSION: Visual loss awaiting injection intravitreal anti-VEGF is clinically significant and with an asymptotic pattern, with early rapid loss of vision in both the onset of the disease and the reactivation. Initiation of anti-VEGF treatment must be undertaken urgently, as should retreatment of disease activation to reduce visual loss.

Assuntos