RESUMO

BACKGROUND: This single-centered randomized controlled clinical trial aimed to evaluate the effectiveness of micro-osteoperforations (MOPs) in accelerating the orthodontic retraction of maxillary incisors. METHODS: Forty-two patients aged 16-40 were recruited and randomly assigned into two groups, one which underwent MOPs (MOPG) in the buccal and palatal region of all maxillary incisors immediately before the start of retraction and one which did not (CG). Eligibility criteria included the orthodontic need for maxillary first premolars extraction and space closure in two phases. The primary outcome of the study consisted of measuring the rate of space closure and, consequently, the rate of incisors' retraction using digital model superimposition 14 days later and monthly thereafter for the next 4 months. The secondary outcomes included measuring anchorage loss, central incisors' inclination, and root length shortening, analyzed using cone beam computed tomography scans acquired before retraction and 4 months after retraction. Randomization was performed using QuickCalcs software. While clinical blinding was not possible, the image's examinator was blinded. RESULTS: Twenty-one patients were randomly assigned to each group. However, due to various reasons, a total of 37 patients (17 male and 20 female) were analyzed (mean age: 24.3 ± 8.1 years in the MOPG; 22.2 ± 4.2 years in the CG) during the trial. No statistically significant difference was found between the MOPG and the CG regarding the incisors' retraction measured at different time points at the incisal border (14 days, 0.4 mm vs. 0.5 mm; 1 month, 0.79 mm vs. 0.77 mm; 2 months, 1.47 mm vs. 1.41 mm; 3 months, 2.09 mm vs. 1.88 mm; 4 months, 2.62 mm vs. 2.29 mm) and at the cervical level (14 days, 0.28 mm vs. 0.30 mm; 1 month, 0.41 mm vs. 0.32 mm; 2 months, 0.89 mm vs. 0.61 mm; 3 months, 1.36 mm vs. 1.10 mm; 4 months, 1.73 mm vs. 1.39 mm). Similarly, no statistically significant differences were detected in the space closure, anchorage loss, central incisors' inclination, and radicular length between groups. No adverse effect was observed during the trial. CONCLUSIONS: MOPs did not accelerate the retraction of the maxillary incisors, nor were they associated with greater incisor inclination or root resorption. Trial registration ClinicalTrials.gov NCT03089996. Registered 24 March 2017- https://clinicaltrials.gov/ct2/show/NCT03089996 .

Assuntos

RESUMO

The aim of this retrospective cross-sectional investigation was to perform a 3D analysis of craniofacial morphology of patients with unilateral cleft lip and palate (UCLP) at two stages of skeletal maturation. Cone-beam computed tomography (CBCT) scans of 52 UCLP patients (34 prepubertal; 18 pubertal) were collected from an outpatient referral center for the treatment of craniofacial deformities. In total 15 multiplanar craniofacial landmarks were identified, 3D virtual surface models were created, and 13 variables were measured to assess the 3D Euclidean distances between landmarks and spatial position of the landmarks in the projected X, Y and Z components. Maxillary and mandibular pitch (clockwise, counterclockwise) rotation relative to the cranial base was also evaluated. The significance level was set at 5%. Maxillary retrusion value relative to the cranial base was higher and statistically significant greater (p = 0.028) in pubertal (SNA, 77.4° ± 6.2; N-ANS Y, 3.3 mm ± 3.1) than in prepubertal patients (SNA 81.0° ± 5.2; N-ANS Y, 5.8 mm ± 2.7). The posterior cranial base length (S-Ba Y) was significantly longer (p = 0.013) in pubertal (20.7 mm ± 3.4) than in prepubertal patients (18.4 mm ± 2.7). The upper facial height (N-ANS Z) was significantly greater (p = 0.01) in pubertal (46.9 mm ± 4.5) than in prepubertal patients (43.4 mm ± 3.0). Prepubertal and pubertal UCLP patients presented distinct patterns of craniofacial morphology, mainly in the sagittal component of the maxilla and in the posterior cranial base length. Pubertal patients had greater maxillary retrusion and posterior cranial base length.

Assuntos

RESUMO

Abstract The aim of this retrospective cross-sectional investigation was to perform a 3D analysis of craniofacial morphology of patients with unilateral cleft lip and palate (UCLP) at two stages of skeletal maturation. Cone-beam computed tomography (CBCT) scans of 52 UCLP patients (34 prepubertal; 18 pubertal) were collected from an outpatient referral center for the treatment of craniofacial deformities. In total 15 multiplanar craniofacial landmarks were identified, 3D virtual surface models were created, and 13 variables were measured to assess the 3D Euclidean distances between landmarks and spatial position of the landmarks in the projected X, Y and Z components. Maxillary and mandibular pitch (clockwise, counterclockwise) rotation relative to the cranial base was also evaluated. The significance level was set at 5%. Maxillary retrusion value relative to the cranial base was higher and statistically significant greater (p = 0.028) in pubertal (SNA, 77.4° ± 6.2; N-ANS Y, 3.3 mm ± 3.1) than in prepubertal patients (SNA 81.0° ± 5.2; N-ANS Y, 5.8 mm ± 2.7). The posterior cranial base length (S-Ba Y) was significantly longer (p = 0.013) in pubertal (20.7 mm ± 3.4) than in prepubertal patients (18.4 mm ± 2.7). The upper facial height (N-ANS Z) was significantly greater (p = 0.01) in pubertal (46.9 mm ± 4.5) than in prepubertal patients (43.4 mm ± 3.0). Prepubertal and pubertal UCLP patients presented distinct patterns of craniofacial morphology, mainly in the sagittal component of the maxilla and in the posterior cranial base length. Pubertal patients had greater maxillary retrusion and posterior cranial base length.

RESUMO

ABSTRACT Objective: To evaluate the mechanical properties of mini-implants (MIs) manufactured from stainless steel and compare them with conventional titanium-aluminum-vanadium alloy MIs. Material and Methods: The following groups were formed: G1 (n=24), 8×1.5 mm steel MIs; G2 (n=24), 12×2.0 mm steel MIs; and G3 (n=24), 10×1.5 mm titanium MIs. The 72 MIs were inserted in the infra zygomatic crest region of the maxilla and retromolar trigone in the jaw of 10 pigs. Pull-out, insertion torque, fracture and percussion tests were performed in order to measure the tensile strength, primary stability and fracture strength of MIs. A digital torque gauge was used to measure insertion and fracture torque, a universal mechanical testing machine was used for pull-out testing and a periotest device was used to measure the micromovement of MIs. For morphological and MI component evaluation, scanning electron microscopy (SEM) was performed. D'Agostino & Pearson, Kruskal-Wallis, and Dunn post-hoc and normality tests were used. Results: G2 insertion and fracture torques were significantly higher than G1 and G3 insertion and fracture torques (p<0.05). The pull-out and percussion tests presented similar values among the groups. SEM revealed that the fracture point was predominantly on the fourth thread for steel MIs (G1 and G2) and on the seventh thread for titanium-aluminum-vanadium MIs (G3). Conclusion: The mechanical properties of stainless steel MIs are superior to those of titanium-aluminum-vanadium alloy MIs.

Assuntos

RESUMO

Introduction The aim of this systematic review and meta-analysis was to evaluate the effects of maxillary expansion on adults with obstructive sleep apnoea (OSA).Methods Electronic searches up to July 2021 in eight electronic databases were conducted. Study selection, data extraction, risk of bias evaluation using ROBINS-I, quality of evidence assessment using GRADE and meta-analyses were performed.Results The electronic searches yielded 1,007 studies. Following the application of the eligibility criteria, 15 articles were fully read and five studies were included. The studies evaluated the effects of surgically assisted rapid maxillary expansion in adults with OSA. The meta-analysis demonstrated an improvement in Apnoea-Hypopnea Index (AHI) (MD = -9.91, CI = -14.57 to -5.25), Oxygen Desaturation Index (ODI) (MD = -7.95, CI = -12.23 to -3.67), and Epworth Sleepiness Scale (ESS) (MD = -4.40, CI = -6.39 to -2.40). ROBINS-I indicated serious, no information and critical risk of bias for the included studies. The quality of the evidence was very low.Conclusion The findings herein suggest that maxillary expansion could improve OSA in adults in the short term.

RESUMO

OBJECTIVE: To develop and make available, at no cost to the user, Information and Communications Technology (ICT) tools for Dentistry, providing dental information and advice geared toward patients undergoing orthodontic treatment with fixed appliances. MATERIAL AND METHODS: A Dentistry-based content that contemplated information and advice concerning orthodontic treatment with fixed appliances was elaborated. The materials, which included instructions on oral hygiene and treatment strategies when faced with possible complications, were evaluated and validated by specialists, whose assessments reached a 85% approval. From the validated content, products using four distinct ICT tools were formulated. RESULTS: The following technological products were developed: a program for community radios, three blog posts, four educational and informative videos, and a smartphone application - using texts, as well as images and videos. These ICT tools, geared toward patients wearing fixed orthodontic appliances, were made available by internet at no cost to the user, and the number of accesses is already expressive. CONCLUSION: These technological-scientific tools, developed and provided freely to the population, can aid patients during their treatment with fixed orthodontic appliances, contributing to the dissemination of reliable information, and clarifying doubts that may arise during orthodontic therapy. These free ICT tools serve to facilitate access to scientific knowledge, thereby favoring social inclusion, bearing in mind that this educational and informative material was offered in a simple and accessible manner to the general population.

Assuntos

RESUMO

Abstract Objective: To evaluate the effectiveness of chewing gums containing CPP-ACP in remineralisation of demineralised enamel around orthodontic brackets. Material and Methods: Enamel blocks from 120 bovine incisors were used. The blocks were flattened and polished, followed by the development of incipient subsurface caries. The blocks have been subjected to a baseline microhardness analysis. Orthodontic brackets were bonded to the exposed area of the blocks, reserving an area for hardness analysis. An in situ crossover (three-way crossover phases of 21 days with an interval of one week between them), controlled, randomised and blind experimental model was used, with the participation of 12 volunteers divided into groups: G1 - negative control group, without chewing gum; G2 - conventional sugar-free chewing gum, without CPP-ACP (placebo); and G3 - sugar-free chewing gum with CPP-ACP. The following parameters were analysed: superficial linear (Ra), volumetric roughness (Sa), and superficial structural loss, which was indicated by Gap measurement (difference between the healthy and treated area). Statistical tests used were the Friedman, Wilcoxon and Shapiro-Wilk, Kruskal Wallis' nonparametric tests and ANOVA. Results: There was a significant reduction in enamel microhardness after demineralisation in all the groups (p<0.05). This deleterious effect was attenuated in the three groups after the final evaluation, although there were no statistical differences (p<0.05); however, the final values did not return to the baseline values (p<0.05). Conclusion: Chewing gum containing CPP-ACP did not promote in situ remineralisation of demineralised enamel around orthodontic brackets.

Assuntos

RESUMO

ABSTRACT Objective: To develop and make available, at no cost to the user, Information and Communications Technology (ICT) tools for Dentistry, providing dental information and advice geared toward patients undergoing orthodontic treatment with fixed appliances. Material and Methods: A Dentistry-based content that contemplated information and advice concerning orthodontic treatment with fixed appliances was elaborated. The materials, which included instructions on oral hygiene and treatment strategies when faced with possible complications, were evaluated and validated by specialists, whose assessments reached a 85% approval. From the validated content, products using four distinct ICT tools were formulated. Results: The following technological products were developed: a program for community radios, three blog posts, four educational and informative videos, and a smartphone application - using texts, as well as images and videos. These ICT tools, geared toward patients wearing fixed orthodontic appliances, were made available by internet at no cost to the user, and the number of accesses is already expressive. Conclusion: These technological-scientific tools, developed and provided freely to the population, can aid patients during their treatment with fixed orthodontic appliances, contributing to the dissemination of reliable information, and clarifying doubts that may arise during orthodontic therapy. These free ICT tools serve to facilitate access to scientific knowledge, thereby favoring social inclusion, bearing in mind that this educational and informative material was offered in a simple and accessible manner to the general population.

RESUMO Objetivos: Desenvolver e disponibilizar, gratuitamente, ferramentas de tecnologia da informação e comunicação (TIC) para a Odontologia, abordando informações e orientações direcionadas a pacientes em tratamento ortodôntico com aparelho fixo. Material e Métodos: Foi elaborado um conteúdo que contemplou informações e orientações concernentes ao tratamento ortodôntico com aparelho fixo. O material, que abrangeu instruções sobre higiene bucal e sobre abordagens diante de possíveis intercorrências, foi avaliado e validado por especialistas. A partir do conteúdo validado, foram elaborados produtos utilizando quatro ferramentas distintas de TIC. Resultados: Foram desenvolvidos os seguintes produtos tecnológicos: um programa para rádios comunitárias, três postagens para blog, quatro vídeos educacionais e informativos, e um aplicativo para smartphones, utilizando não apenas textos, mas também imagens e vídeos. Essas ferramentas de TIC direcionadas a pacientes fazendo uso de aparelho ortodôntico fixo foram disponibilizadas gratuitamente via internet, e já contam com expressivo número de acessos. Conclusões: As ferramentas técnico-científicas, desenvolvidas e fornecidas livremente à população, podem auxiliar pacientes durante o tratamento com aparelho ortodôntico fixo, contribuir para disseminar informações confiáveis e esclarecer dúvidas que surgem durante a terapia ortodôntica. Essas ferramentas gratuitas de TIC facilitam o acesso ao conhecimento científico e, consequentemente, favorecem a inserção social, tendo em vista que esse material educacional e informativo foi ofertado de maneira simples e acessível à população.

RESUMO

BACKGROUND: The aims of this study were to evaluate the efficacy of alveolar corticotomy (AC) and piezocision (PZ) in accelerating maxillary canine retraction, and their effects on multiple bone remodeling expression in gingival crevicular fluid (GCF). A split-mouth, randomized controlled clinical trial was performed at the Department of Orthodontics of Pontifical Catholic University of Minas Gerais, Brazil. Eligibility criteria included orthodontic need for first maxillary premolars extractions, followed by canine retraction. Fifty-one adult patients were recruited and randomly assigned to 3 groups (allocation ratio 1:1:1). Random allocation of surgical or control interventions to each side of the maxillary arch was also conducted: G1 - AC × Control, G2 - PZ × Control, and G3 - AC × PZ. Both the definition of the group and the decision of the experimental or control sides were randomized by the software. Intraoral digital scans were performed before, 7 and 14 days after the beginning of canine retraction, and subsequently, at every 14 days until a maximum period of 6 months. GCF samples were collected before, and 1, 2, 4, 8, and 12 weeks. The primary outcome consisted in the cumulative distal movement of the canines and was measured by digital model superimposition. The secondary outcome consisted in GCF bone remodeling samples that were quantified in a multiplex immunoassay. The measurements examinator was properly blinded. RESULTS: Forty-seven patients, 19 males and 28 females, were analyzed (mean age 20.72, SD = 6.66, range 15 to 38). Statistically significant differences in canine distal movement between AC and control in G1 were not observed (p > 0.05). In G2, PZ showed lower cumulative incisal and cervical measurements than control from the 2nd to the 24th week (p < 0.05). In G3, PZ showed a lower cumulative incisal and cervical measurements than AC from the16th to the 24th week (p < 0.05). In all groups, differences on biomarkers expression occurred at specific timepoints (p < 0.05), but a distinct pattern was not observed. CONCLUSIONS: AC and PZ were not effective to accelerate maxillary canine retraction and did not induce a distinct pattern of biomarker expression. TRIAL REGISTRATION: NCT03089996 . Registered 24 March 2017 - Registered.

Assuntos

RESUMO

PURPOSE: The aim of this study was to compare the dental effects, impact on quality of life, and pain perception of adolescents wearing Mini Hyrax and Hyrax expanders in rapid palatal expansion. METHODS: Thirty-four adolescents aged 11 to 16 years, with maxillary transverse deficiency (unilateral or bilateral posterior crossbite), were randomly allocated into two groups, Mini Hyrax group and Hyrax group (1:1 ratio). Dental effects were evaluated by digitally superimposed pretreatment and postretention three-dimensional intraoral scans on the palatal rugaes using the software 3DSlicer. Impact on quality of life was assessed with the OHIP-14 questionnaire applied in the pretreatment, posttreatment and postretention. Visual analog scale was applied 24, 48, and 72 h and 7 days after the first activation of the expander. RESULTS: Thirty of the 34 adolescents recruited completed the study. There were no statistically significant differences in dentoalveolar effects between groups. OHIP-14 scores across time among Mini Hyrax wearers were similar to those of the Hyrax wearers. The inter-group comparisons showed no difference between groups with respect to the OHIP-14 scores in posttreatment and postretention (p > 0.05). There were no differences in pain perception between groups. Considering intra-group comparison, the reduction in pain perception among adolescents in the Mini Hyrax group was gradual. Among adolescents in the Hyrax group, a statistically significant reduction between 48 and 72 h was observed. CONCLUSION: There were no significant differences in dental effects, impact on quality of life and pain perception between adolescents wearing Mini Hyrax and Hyrax expanders in rapid palatal expansion.

Assuntos

RESUMO

OBJECTIVES: To investigate the relationship between the use of social networking sites (SNSs) on patient perceptions, acceptance, and expectations of treatment using temporary anchorage devices (TADs) and to compare differences between patients from the United Kingdom and Brazil. MATERIALS AND METHODS: Cross-sectional questionnaires were administered to 39 participants at orthodontic practices in the United Kingdom and Brazil about patients' use of SNSs, exposure to TADs on SNSs, and thoughts on extractions, jaw surgery, or TADs as treatment options. RESULTS: UK patients prefer for clinicians to have SNS profiles (P = .022). Most UK and Brazilian patients want to see their clinician's work online (76.7%) and use SNSs to get information about treatment options (76.6%). There was a statistically significant difference in Brazilian patients' acceptance of TADs as a treatment option compared with UK patients, particularly if it meant avoiding extractions (P = .002), avoiding jaw surgery (P = .004), or reducing treatment time (P = .010). Knowledge of TADs was greater in Brazilian patients (P < .001). CONCLUSIONS: Patients use SNSs to obtain information about treatments and prefer clinicians to have social media accounts. Patients exposed to TADs on SNSs are more likely to accept them as an orthodontic treatment option. UK patients have less knowledge of TADs and are therefore less sure to consider TADs as an option. Brazilian patients are more confident in considering the use of TADs. Clinicians should consider increasing their social media presence to accommodate patients' expectations and acceptance of TADs.

Assuntos

RESUMO

INTRODUCTION: An increasing percentage of the world's population has had access to orthodontic treatment within the last few decades. Consequently, a larger number of patients seeking for correction of their malocclusions, nowadays, present with a history of previous orthodontic therapy. Orthodontists performing retreatments in their practice may have to face additional difficulties, and one of them is treating individuals that may be even more demanding for excellent results and efficient treatments. OBJECTIVES: This manuscript discusses the challenges faced when performing orthodontic retreatments. It illustrates a two-phase retreatment of a pre-adolescent and the ortho-surgical retreatment of a young adult with high demands for fast and exceptional results. Finally, this paper elaborates on the positive impacts that these retreatments had on the patients' self-esteem and quality of life.

Assuntos

RESUMO

ABSTRACT Introduction: An increasing percentage of the world's population has had access to orthodontic treatment within the last few decades. Consequently, a larger number of patients seeking for correction of their malocclusions, nowadays, present with a history of previous orthodontic therapy. Orthodontists performing retreatments in their practice may have to face additional difficulties, and one of them is treating individuals that may be even more demanding for excellent results and efficient treatments. Objectives: This manuscript discusses the challenges faced when performing orthodontic retreatments. It illustrates a two-phase retreatment of a pre-adolescent and the ortho-surgical retreatment of a young adult with high demands for fast and exceptional results. Finally, this paper elaborates on the positive impacts that these retreatments had on the patients' self-esteem and quality of life.

RESUMO Introdução: Um percentual crescente da população mundial vem tendo acesso ao tratamento ortodôntico ao longo das últimas décadas. Consequentemente, hoje em dia, um maior número de pacientes em busca da correção de suas más oclusões apresenta um histórico de tratamento ortodôntico prévio. Ortodontistas que realizam retratamentos ortodônticos podem enfrentar dificuldades adicionais, e uma delas é ter que lidar com indivíduos que apresentam demandas e expectativas ainda maiores em relação à obtenção de resultados excelentes e de forma bastante eficiente. Objetivos: O presente artigo discute os desafios e os impactos positivos do retratamento ortodôntico causados na autoestima e na qualidade de vida dos pacientes, e ilustra o retratamento em duas fases de uma pré-adolescente, e o retratamento ortodôntico-cirúrgico de uma paciente adulta jovem que tinha demandas muito elevadas para a obtenção de resultados rápidos e excelentes.

Assuntos

RESUMO

OBJECTIVES: To develop and validate a questionnaire concerning the aspects evaluated during the hiring process by human resources professionals (HRPs); to apply the validated questionnaire; and to evaluate the perceptions and judgment of HRPs regarding different traumatic dental injuries (TDIs) and their consequences (TDI-Cs). MATERIALS AND METHODS: The acceptability, discriminative properties, internal consistency and test-retest reliability of the developed questionnaire were evaluated, using the same methodology as the main study and adopting a pilot sample. For both the validation process and the application phase, images of one male and one female were manipulated, or not (control), to create different types of TDI (enamel fracture, enamel and dentin fracture, avulsion) and TDI-Cs (crown discoloration, tooth loss due to avulsion). In the application phase, the images were analyzed by 100 HRPs using the validated questionnaire, and the results were analyzed using the Friedman, Wilcoxon and Mann-Whitney tests (P < 0.05). RESULTS: The developed questionnaire produced excellent acceptability, strong discriminative properties, satisfactory internal consistency and excellent to good test-retest reliability. The presence of TDIs and TDI-Cs had a negative effect on the evaluated aspects used during the hiring process (P < 0.001). Tooth loss provoked the worse level of judgment in all evaluated characteristics and in professional hiring. CONCLUSIONS: The developed questionnaire produced valid and reliable responses concerning the aspects evaluated during the hiring process by Brazilian HRPs. TDIs and TDI-Cs had a negative influence on the aspects evaluated during the HRP professional hiring process. CLINICAL SIGNIFICANCE: TDIs and TDI-Cs had a negative influence on the aspects evaluated during the HRP professional hiring process.

Assuntos

RESUMO

Anterior open bite malocclusion is generally associated with several causes. This case report describes the 2-phase treatment of a 13-year-old boy with a Class III malocclusion, severe anterior open bite, and bilateral posterior crossbite treated without surgical intervention. An orthopedic approach was performed in phase 1 with a hyrax-type palatal expander, followed by maxillary protraction with a facemask for a 10-month period to promote the correction of transverse and sagittal deviations. In phase 2, a comprehensive orthodontic approach using fixed preadjusted appliances associated with intermaxillary elastics was performed. These approaches, combined with good patient compliance, established a functional and esthetic occlusal relationship, normal overjet and overbite, and a well-balanced facial appearance. The 4.5-year follow-up indicated that treatment results were stable.

Assuntos

RESUMO

The aim of this study was to evaluate the shear bond strength of orthodontic tubes adhered to ceramics with the Transbond™ XT bonding resin (3M, Maplewood, MN, USA) while varying the surface treatment. Then, the adhesive remaining index (ARI) was verified, and the representative fracture patterns were evaluated via scanning electron microscopy. Forty-eight zirconia blocks were divided into three groups, varying the number of layers of the 10-methacryloyloxy-decyl dihydrogen phosphate (MDP) primer: one, two, or three applications. In addition, 16 lithium disilicate IPS E.max ceramic disks (Ivoclar Vivadent, Schaan, Liechtenstein) were conditioned with 10% hydrofluoric acid for 20 s and underwent a single-layer primer application regimen. The four groups were further stratified to undergo bond testing after either 24 h (control) or 5000 cycles in a thermocycling machine. A shear bond strength test was performed (0.5 mm/min), and the MPa values obtained were submitted to a two-way analysis of variance and Tukey's test. There was no statistical difference among the control group ceramics that received the varying surface treatments. After thermocycling, it was verified that both the E.max disks and the zirconia ceramics with three primer applications obtained the highest bond strength values. In the 24 h groups, a total displacement of the resin from the orthodontic tubes was observed (ARI of 1). After thermocycling, the highest prevalence of an ARI of 5 (adhesive failure) was observed among the zirconia ceramics with single-coat primer application, followed by those with triple-coat primer application (mixed failure). Three applications of the MDP-containing ceramic primer achieved the best result in the present study. Zirconia surface should be treated with three coats of MDP primer to achieve a level of bond strength similar to silica-rich phase ceramic.

RESUMO

BACKGROUND: The aim of this systematic review was to evaluate the effects of piezocision in accelerating orthodontic tooth movement (OTM) and its possible adverse effects. MATERIAL AND METHODS: The Databases Medline, Embase, CENTRAL and LILACS were searched until March 2019, for randomized controlled trials (RCTs) and controlled clinical trials (CCTs) that used piezocision associated with orthodontic treatment. A manual search was also performed. The search, studies selection, assessment of risk of bias and data collection were carried out by two independent reviewers. RESULTS: Eleven publications were included in this review (4 CCTs and 7 RCTs). No study presented low risk of bias. Different types of tooth movement were evaluated: lower anterior alignment, en-masse retraction, overall orthodontic treatment and canine distalization. A total of 240 participants were analyzed in the included studies. Seven studies found significant acceleration in the piezocision group, while two studies found no differences. Adverse effects regarding patient's satisfaction, pain perception, or worsening of periodontal parameters were not observed. There was no consensus concerning anchorage loss and root resorption. CONCLUSIONS: The literature does not provide high-quality evidence to confirm that Piezocision results in significant OTM acceleration. Therefore, high-quality RCTs should be conducted to allow reliable conclusions about the effects of piezocision in orthodontics. Key words:Piezosurgery, tooth movement techniques, orthodontics.

RESUMO

Leveling the curve of Spee is a commonly-used strategy to correct deep bites. Although several techniques have been proposed to intrude mandibular incisors (MI), flaring of these teeth is often observed and in many instances undesired. A three-dimensional (3D) finite element model (FEM) was used to locate the ideal point of force application (PFA) to achieve pure MI intrusion with the three-piece arches' technique. It comprised (1) a 0.021 × 0.025 in. stainless steel (SS) wire that passively filled the slots of the canine and premolar brackets and the first and second molar tubes, bilaterally; (2) a 0.0215 × 0.0275 in. SS intrusion base arch (IBA) inserted into the MI brackets, that presented a step down distal to the lateral incisors brackets and a posterior extension arm; (3) titanium-molybdenum tip-back springs designed to apply the intrusion force, fitted inside the first molar gingival tube. Four PFA on the IBA were simulated (FEM 1, 2, 3, and 4). FEM 3 resulted in pure MI and was considered the ideal PFA. FEM1 and 2 showed intrusion and buccal crown flaring of the MI, whereas FEM4 resulted in intrusion and lingual crown flaring of those teeth. Clinicians may consider three-piece arch mechanics to achieve pure MI intrusion. However, they must be aware that when force was applied anteriorly or posteriorly to the ideal PFA, the incisors would incline labially or lingually, respectively.

RESUMO

ABSTRACT: Williams-Beuren syndrome is a rare disease with manifestations such as cardiovascular changes, distinct facial features, mental retardation, and learning disabilities. Oral manifestations are not commonly described and can often be misdiagnosed. This report describes the case of a male patient diagnosed with Williams-Beuren syndrome presenting classic clinical features that affect the face as a convex profile, with maxillary protrusion and mandibular retrusion, a discreetly acute nasolabial angle, passive labial sealing, and an open mandibular angle characteristic of Class II skeletal pattern. In addition, the patient has oral manifestations such as the absence of some dental elements, a Class II of Angle 1st division, dental cross bite, and atresic arches. The periodontal condition presents with generalized gingivitis. Knowledge about the possible manifestations of Williams-Beuren syndrome is important to improve the ability of orthodontists to better serve these patients.

RESUMEN: El síndrome de Williams-Beuren es una enfermedad rara con manifestaciones tales como cambios cardiovasculares, diversas características faciales, retraso mental y problemas de aprendizaje. Las manifestaciones orales no se describen comúnmente y con frecuencia se pueden diagnosticar erróneamente. Este informe describe el caso de un paciente masculino diagnosticado con síndrome de Williams-Beuren que presentaba características clínicas clásicas que afectaban la cara como un perfil convexo, con protrusión maxilar y retrusión mandibular, un ángulo nasolabial discretamente agudo, sellado labial pasivo y un ángulo mandibular abierto característico del patrón esquelético clase II. Además, el paciente presentaba manifestaciones orales tales como, ausencia de algunos elementos dentales, una clase II de Angle 1ª división, mordida dental cruzada y arcos acrílicos. La condición periodontal se presentaba con gingivitis generalizada. El conocimiento sobre las posibles manifestaciones del síndrome de Williams-Beuren es importante ya que mejora la capacidad de los ortodoncistas para atender mejor a estos pacientes.

Assuntos