RESUMO

This manuscript details a comprehensive investigation into the synthesis, structural characterization, thermal stability, and optical properties of nickel-containing hybrid perovskites, namely CH3NH3NiCl3, CsNiCl3, and CH3NH3NiBrCl2. The focal point of this study is to unravel the intricate crystal structures, thermal behaviors, and optical characteristics of these materials, thereby elucidating their potential application in energy conversion and storage technologies. X-ray powder diffraction measurements confirm that CH3NH3NiCl3 adopts a crystal structure within the Cmcm space group, while CsNiCl3 is organized in the P63/mmc space group, as reported previously. Such structural diversity underscores the complex nature of these perovskites and their potential for tailored applications. Thermal analysis further reveals the stability of CH3NH3NiCl3 and CH3NH3NiBrCl2, which begin to decompose at 260 °C and 295 °C, respectively. The optical absorption properties of these perovskites studied by UV-VIS-NIR spectroscopy revealed the bands characteristic of Ni2+ ions in an octahedral environment. Notably, these absorption bands exhibit subtle shifts upon bromide substitution, suggesting that optical properties can be finely tuned through halide modification. Such tunability is paramount for the design and development of materials with specific optical requirements. By offering a detailed examination of these properties, the study lays the groundwork for future advancements in material science, particularly in the development of innovative materials for sustainable energy technologies.

RESUMO

This article describes the development of a nickel-catalyzed regio- and diastereoselective formal [3+2] cycloaddition between N-substituted indoles and donor-acceptor cyclopropanes to synthesize cyclopenta[b]indoles. Optimized reaction conditions provide the desired nitrogen-containing cycloadducts in up to 93% yield and dr 8.6:1 with complete regioselectivity. The substrate scope showed high tolerance to various substituted indoles and cyclopropanes, resulting in the synthesis of six new cyclopenta[b]indoles and the isolation of five derivatives previously reported in the literature. In addition, a mechanistic proposal for the reaction was studied through online reaction monitoring by ESI-MS, allowing for the identification of the reactive intermediates in the Ni(II) catalyzed process. X-ray crystallography confirmed the structure and relative endo stereochemistry of the products. This method enables the fast and efficient construction of fused indolines from readily accessible starting materials.

RESUMO

In this study, a systematic investigation of MoS2 nanostructure growth on a SiO2 substrate was conducted using a two-stage process. Initially, a thin layer of Mo was grown through sputtering, followed by a sulfurization process employing the CVD technique. This two-stage process enables the control of diverse nanostructure formations of both MoS2 and MoO3 on SiO2 substrates, as well as the formation of bulk-like grain structures. Subsequently, the addition of reduced graphene oxide (rGO) was examined, resulting in MoS2/rGO(n), where graphene is uniformly deposited on the surface, exposing a higher number of active sites at the edges and consequently enhancing electroactivity in the HER. The influence of the synthesis time on the treated MoS2 and also MoS2/rGO(n) samples is evident in their excellent electrocatalytic performance with a low overpotential.

RESUMO

[Eu(3DPIQC)3] (where DPIQC = 3-(diphenyl phosphoryl)-1-isoquinolinecarboxylate), a luminescent europium complex with antenna ligands, has been carefully embedded within a polyvinyl butyral (PVB) matrix and the resulting material was used to prepare films used as luminescent down-shifting layers (LDSLs) for crystalline Si-based solar cells. The films were characterized using photoluminescence spectroscopy, atomic force spectroscopy (AFM), UV-Vis spectroscopy, and fluorescence microscopy. The AFM analysis shows films with low surface roughness, while fluorescence microscopy revealed that the Eu complex embedded in PVB assumed a spheroidal configuration, a morphology especially beneficial for optical applications. The so-obtained LDSLs were utilized as energy converters in c-Si solar cells to enhance the utilization of high-energy photons, thereby improving their overall efficiency. The determination of photovoltaic parameters carried out before and after the deposition of the LDSLs on the c-Si cells confirms a positive effect on the efficiency of the cell. The Jsc increases from 121.6 mA/cm2 to 124.9 mA/cm2, and the open circuit voltage (Voc) is found to be unrelated to the complex concentration in the films. The fill factor (FF) remains constant with the Eu concentration. The EQE curves indicate an enhancement in the performance of the photovoltaic cells within the UV region of the spectrum for all coated devices. Electrochemical impedance spectroscopy (EIS) was also carried out in order to analyze the effect of the Eu complex in the charge transfer process of the devices.

RESUMO

A method for the synthesis of rafoxanide 6, a halogenated salicylanilide used as an efficient anthelmintic in sheep and cattle, is presented. Rafoxanide 6 was synthesized in only three steps from readily available 4-chlorophenol with 74% overall yield. The synthesis has two key stages: the first was salicylic acid iodination, adding iodine in the presence of hydrogen peroxide, which allowed obtaining a 95% yield. The second key stage was the reaction of 3,5-diiodosalicylic acid 5 with aminoether 4, where salicylic acid chloride was formed in situ with PCl3 achieving 82% yield. Chemical characterization of both intermediates and final product was achieved through physical and spectroscopic (IR, NMR and MS) techniques. Supplementary Information: The online version contains supplementary material available at 10.1007/s11696-023-02846-9.

RESUMO

In this work, electrocatalytic changes of Cu(II) triazole complexes (Cu(L)2) resulting from inductive effects were evaluated to fabricate a sensor for hydrogen peroxide (H2O2) determination. Three copper(II) complexes with electronically differentiated ligands were synthesized by slow diffusion method and characterized by X-ray crystallography, Fourier transformed infrared (FTIR), UV-Vis, scanning electron microscopy (SEM) and voltammetry cyclic (CV). Cu(LOMe)2/GC, Cu(LBr)2/GC and Cu(LNO2)2/GC sensors were then prepared. Under optimal conditions (pH = 11), the optimal sensor presented a response at -0.5 V, good linear range of 1-32 µM, reproducibility (1.7%), repeatability (1.2%), LOD of 0.0246 µM (S/N = 5), LOQ of 0.0747 µM (S/N = 5) and selectivity. Additionally, Cu(LNO2)2/GC sensor has been successfully applied in commercial substances, such as mouthwash, milk and tea.

RESUMO

Alzheimer's disease (AD) is a neurodegenerative disorder whose prevalence has an incidence in senior citizens. Unfortunately, current pharmacotherapy only offers symptom relief for patients with side effects such as bradycardia, nausea, and vomiting. Therefore, there is a present need to provide other therapeutic alternatives for treatments for these disorders. The 5-HT4 receptor is an attractive therapeutic target since it has a potential role in central and peripheral nervous system disorders such as AD, irritable bowel syndrome, and gastroparesis. Quantitative structure-activity relationship analysis of a series of 62 active compounds in the 5-HT4 receptor was carried out in the present work. The structure-activity relationship was estimated using three-dimensional quantitative structure-activity relationship (3D-QSAR) techniques based on these structures' field molecular (force and Gaussian field). The best force-field QSAR models achieve a value for the coefficient of determination of the training set of R2training = 0.821, and for the test set R2test = 0.667, while for Gaussian-field QSAR the training and the test were R2training = 0.898 and R2test = 0.695, respectively. The obtained results were validated using a coefficient of correlation of the leave-one-out cross-validation of Q2LOO = 0.804 and Q2LOO = 0.886 for force- and Gaussian-field QSAR, respectively. Based on these results, novel 5-HT4 partial agonists with potential biological activity (pEC50 8.209-9.417 for force-field QSAR and 9.111-9.856 for Gaussian-field QSAR) were designed. In addition, for the new analogues, their absorption, distribution, metabolism, excretion, and toxicity properties were also analyzed. The results show that these new derivatives also have reasonable pharmacokinetics and drug-like properties. Our findings suggest novel routes for the design and development of new 5-HT4 partial agonists.

Assuntos

RESUMO

Genetic exchange by hybridization or admixture can make an important contribution to evolution, and introgression of favourable alleles can facilitate adaptation to new environments. A small number of honeybees (Apis mellifera) with African ancestry were introduced to Brazil ~60 years ago, which dispersed and hybridized with existing managed populations of European origin, quickly spreading across much of the Americas in an example of a massive biological invasion. Here, we analyse whole-genome sequences of 32 Africanized honeybees sampled from throughout Brazil to study the effect of this process on genome diversity. By comparison with ancestral populations from Europe and Africa, we infer that these samples have 84% African ancestry, with the remainder from western European populations. However, this proportion varies across the genome and we identify signals of positive selection in regions with high European ancestry proportions. These observations are largely driven by one large gene-rich 1.4-Mbp segment on chromosome 11 where European haplotypes are present at a significantly elevated frequency and likely confer an adaptive advantage in the Africanized honeybee population. This region has previously been implicated in reproductive traits and foraging behaviour in worker bees. Finally, by analysing the distribution of ancestry tract lengths in the context of the known time of the admixture event, we are able to infer an average generation time of 2.0 years. Our analysis highlights the processes by which populations of mixed genetic ancestry form and adapt to new environments.

Assuntos