RESUMO
Magnetic scaffolds with different charge densities were prepared using magnetic nanoparticles (MNP) and xanthan gum (XG), a negatively charged polysaccharide, or hydroxypropyl methylcellulose (HPMC), an uncharged cellulose ether. XG chains were crosslinked with citric acid (cit), a triprotic acid, whereas HPMC chains were crosslinked either with cit or with oxalic acid (oxa), a diprotic acid. The scaffolds XG-cit, HPMC-cit and HPMC-oxa were characterized by scanning electron microscopy (SEM), inductively coupled plasma atomic emission spectroscopy (ICP-AES), superconducting quantum interference device (SQUID) magnetometry, contact angle and zeta-potential measurements. In addition, the flux of Ca2+ ions through the scaffolds was monitored by using a potentiometric microsensor. The adhesion and proliferation of murine fibroblasts (NIH/3T3) on XG-cit, XG-cit-MNP, HPMC-cit, HPMC-cit-MNP, HPMC-oxa and HPMC-oxa-MNP were evaluated by MTT assay. The magnetic scaffolds presented low coercivity (<25Oe). The surface energy values determined for all scaffolds were similar, ranging from 43mJm-2 to 46mJm-2. However, the polar component decreased after MNP incorporation and the dispersive component of surface energy increased in average 1mJm-2 after MNP incorporation. The permeation of Ca2+ ions through XG-cit-MNP was significantly higher in comparison with that on XG-cit and HPMC-cit scaffolds, but through HPMC-cit-MNP, HPMC-oxa and HPMC-oxa-MNP scaffolds it was negligible within the timescale of the experiment. The adhesion and proliferation of fibroblasts on the scaffolds followed the trend: XG-cit-MNP>XG-cit>HPMC-cit, HPMC-cit-MNP, HPMC-oxa, HPMC-oxa-MNP. A model was proposed to explain the cell behavior stimulated by the scaffold charge, MNP and Ca2+ ions permeation.
Assuntos
Cálcio/metabolismo , Derivados da Hipromelose/farmacologia , Campos Magnéticos , Nanopartículas de Magnetita/química , Polissacarídeos Bacterianos/farmacologia , Alicerces Teciduais/química , Animais , Cálcio/química , Adesão Celular/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Células Cultivadas , Derivados da Hipromelose/química , Íons/química , Íons/metabolismo , Camundongos , Estrutura Molecular , Células NIH 3T3 , Polissacarídeos Bacterianos/químicaRESUMO
The purpose of this Article is to characterize polymeric particles of poly(methylmethacrylate) (PMMA) synthesized in the presence of one of two different quaternary ammonium surfactants (QACs): cetyltrimethylammonium bromide (CTAB) or dioctadecyldimethylammonium bromide (DODAB). The methods used are dynamic light scattering for sizing, polydispersity and zeta potential analysis, scanning electron microscopy (SEM) for morphology visualization, and plating plus colony-forming unities (CFU) counting for the determination of antimicrobial activity. The results point out the high QAC concentration required to obtain cationic and bioactive antimicrobial particles with good colloidal stability and a permanent load of the polymeric network with QACs. Over a range of micromolar QAC concentrations, there is remarkable antimicrobial activity of PMMA/CTAB or PMMA/DODAB particles, which is much higher than those determined for the QACs by themselves. Loading the biocompatible polyacrylate particles with QACs is a facile, fast, low-cost approach to obtaining highly efficient antimicrobial nanoparticles.
Assuntos
Antibacterianos/farmacologia , Polimetil Metacrilato/farmacologia , Pseudomonas aeruginosa/efeitos dos fármacos , Compostos de Amônio Quaternário/química , Staphylococcus aureus/efeitos dos fármacos , Tensoativos/química , Antibacterianos/síntese química , Antibacterianos/química , Sobrevivência Celular/efeitos dos fármacos , Relação Dose-Resposta a Droga , Emulsões/síntese química , Emulsões/química , Emulsões/farmacologia , Testes de Sensibilidade Microbiana , Tamanho da Partícula , Polimerização , Polimetil Metacrilato/síntese química , Polimetil Metacrilato/química , Pseudomonas aeruginosa/citologia , Staphylococcus aureus/citologia , Relação Estrutura-Atividade , Propriedades de SuperfícieRESUMO
The interaction between horseradish peroxidase (HRP) and dioctadecyldimethylammonium bromide (DODAB) bilayers supported on polystyrene microspheres (PSS) or on flat silicon wafers was evaluated from the following techniques: (1) dynamic light-scattering for determining size distributions, zeta-potentials and polydispersities for dispersions; (2) spectrophotometric determination of HRP concentration in supernatants of centrifuged mixtures; (3) in situ ellipsometry for mean thickness of deposited layers on wafers; (4) kinetics of product appearance for oxidation of 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid by H(2) O(2) in presence of free or immobilized enzyme. HRP incorporation (3.0 mg/m(2)) did not alter mean diameter and zeta-potential of PSS/DODAB particles but reduced enzyme activity by 50%, though activity persisted after several rinsing steps. In situ ellipsometry could not detect any HRP layer on top of the DODAB bilayer. HRP insertion in the bilayer core explained all results for both systems. Useful biotechnological applications are anticipated for such assemblies.
Assuntos
Cátions , Peroxidase do Rábano Silvestre/química , Bicamadas Lipídicas , Biomimética , Cinética , Oxirredução , Compostos de Amônio Quaternário/químicaRESUMO
The study on the adsorption of horseradish peroxidase (HRP) onto silicon wafers was carried out by means of in situ ellipsometry, atomic force microscopy (AFM) and contact angle measurements. A smooth HRP layer adsorbed onto Si wafers. The enzymatic activity of free or adsorbed HRP was determined by the oxidation of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and by the emulsion polymerization of ethylene glycol dimethacrylate (EGDMA). Upon adsorbing, HRP molecules might have undergone some conformational changes, which caused a small reduction of enzymatic activity in comparison to that observed for HRP solution. However, it was possible to reuse the same HRP-covered Si wafer as catalyst in the polymerization of EGDMA three times.