RESUMO

Green propolis is a resin produced from Baccharis dracunculifolia, which has as its main compounds flavonoids, derivatives of cinnamic acids, such as artepillin C and baccarin. This resin has antibacterial, antifungal, anti-inflammatory, antioxidant, and anticancer activities. This review aimed to analyze pharmaceutical patents containing green propolis in various formulations. The search was conducted in the National Institute of Industrial Property (INPI), the Patent Search of Spain and Latin America (Latipat-Espacenet), the World Intellectual Property Organization (WIPO), and Google Patents, with a combination of the keywords green propolis, green propolis extract, pharmacology, and pharmaceutical product. Primary research identified 60 patents, from which 22 were selected after applying the inclusion criteria. The selected patents referred to products with pharmacological activities, from cancer treatment to food supplements and included innovations for improved controlled release of the green propolis compounds. Most of the documents concerned the preparation and/or formulation of the green propolis extract, followed by innovative extraction methods, treatment and systemic use, and finally by topical use and quality control techniques and procedures. Thus, the reviewed patents of green propolis provided valuable insights into the pharmaceutical applications of green propolis, showing its potential in diverse formulations and treatments.

RESUMO

Recent studies suggest that the association of antigens in microparticles increases the anti-Leishmania vaccine immunogenicity. This study aims to investigate the in situ effect of the adjuvant performance consisting of chitosan-coated poly(D,L-lactic) acid submicrometric particles (SMP) and analyze the inflammatory profile and toxicity. Two formulations were selected, SMP1, containing poly(D,L-lactide) (PLA) 1% wt/v and chitosan 1% wt/v; and SMP2, containing PLA 5% wt/v and chitosan 5% wt/v. After a single dose of the unloaded SMP1 or SMP2 in mice, the SMPs promoted cell recruitment without tissue damage. In addition, besides the myeloperoxidase (MPO) activity having demonstrated similar results among the analyzed groups, a progressive reduction in the levels of N-acetyl-ß-D-glucosaminidase (NAG) until 72 h was observed for SMPs. While IL-6 levels were similar among all the analyzed groups along the kinetics, only the SMPs groups had detectable levels of TNF-α. Additionally, the Leishmania braziliensis antigen was encapsulated in SMPs (SMP1Ag and SMP2Ag), and mice were vaccinated with three doses. The immunogenicity analysis by flow cytometry demonstrated a reduction in NK (CD3-CD49+) cells in all the SMPs groups, in addition to impairment in the T cells subsets (CD3+CD4+) and CD3+CD8+) and B cells (CD19+) of the SMP2 group. The resulting data demonstrate that the chitosan-coated SMP formulations stimulate the early events of an innate immune response, suggesting their ability to increase the immunogenicity of co-administered Leishmania antigens.

RESUMO

Miconazole-loaded nanoparticles coated with hyaluronic acid (miconazole-loaded nanoparticles/HA) were developed to overcome the limitations of the conventional therapy of the vulvovaginal candidiasis (VVC). They were synthesized by emulsification and solvent evaporation techniques, characterized by diameter, polydispersity index, zeta potential, encapsulation efficiency, atomic force microscopy (AFM), evaluated in terms of efficacy against C. albicans in vitro, and tested in a murine VVC model. Nanoparticles showed 211nm of diameter with a 0.32 polydispersity index, -53mV of zeta potential, and 90% miconazole encapsulation efficiency. AFM evidenced nanoparticles with a spherical shape. They inhibited the proliferation of C. albicans in vitro and in vivo after a single administration. Nanoparticles released the miconazole directly in the site of action at low therapeutic doses, which was enough to eliminate the fungal burden in the murine VVC model. These systems were rationally designed since the existence of the HA induces their adhesion on the vaginal mucus and their internalization via CD44 receptors, inhibiting the C. albicans. Therefore, miconazole-loaded nanoparticles/HA represent an innovative non-conventional pharmaceutical dosage form to treat the VVC and recurrent VVC.

Assuntos

RESUMO

INTRODUCTION: The inclusion of health professionals who have some type of disability brings benefits, such as the increase in empathy that facilitates the relationship with patients. In this work, we present a case study on the inclusion of an undergraduate Dentistry student with upper limb agenesis. PURPOSE: In order to improve the quality of life for people with upper limb agenesis, it is urgent to establish inclusion strategies in the educational field. This process included the use of assistive technologies to allow the manipulation of instruments used in the practice of dental clinical activities, enabling future Dentists with upper limb agenesis to have an equal education in relation to their academic peers. CASE SELECTION: The case study presented in this work consists of the follow-up of G., a 23-year-old female Dentistry student. The developed adaptations were made using a low-temperature thermoplastic. The expert team that participated in this process was formed by three occupational therapists and three Dentistry professors. The process included several stages, being the last one the integration, in which training sessions were performed. OUTCOMES: The process was accessed using two main tools: quantitative questionnaires and qualitative interviews. After the proposed intervention, the volunteer presented a gradual evolution in her occupational performance with the use of most adaptations, promoting her functional training. DISCUSSIONS: Most adaptations allowed G. to perform the activities satisfactorily, with the precision inherent to these tasks, even with little training time. CONCLUSIONS: This case study demonstrates the high applicability of the proposed technologies.

In order to improve the quality of life for people with upper limb agenesis, it is urgent to establish inclusion strategies in the educational field, as assessed in this study caseThe inclusion process of Dentistry students can include the use of assistive technology to allow the manipulation of instruments for the practice of clinical activitiesOur study suggests that the assistive adpatations promote a gradual evolution in the students' occupational performance, functional training and motor qualification.

RESUMO

Background: Orthodontic treatment makes the patient susceptible to the development of white spot lesions (WSL) due to the greater accumulation of bacterial plaque. The purpose of this in-vitro study was to evaluate the preventive effect of two resin materials on the incidence of these lesions in the region adjacent to the fixed bracket bonded under a WSL-treated area by two resin materials. Material and Methods: 36 extracted human molars presenting natural WSL were included. They were randomly divided into 2 groups for intervention: IC (Infiltration resin Icon®) and PS (resin sealant Pro Seal ®). Braces were bonded just above the WSL. The enamel surface around the brace was treated by one of the tested materials, leaving another part to be control. The samples were submitted again to a cariogenic challenge. The exposed enamel non-treated area from booth groups comprised the control group (E). For morphological analysis, confocal images were taken at baseline, after treatment, and after pH cycling of each sample. Lesion depth were measured (µm) and compared to the enamel thickness to calculate a demineralization index. All groups were compared using the Kruskal Wallis test and Dunn's post-test. Results: PS group showed the lowest demineralization index (0.27 µm) when compared to the control area (0.39 µm) (p<0.05). IC presented a slightly higher percentage of lesions when compared to PS, however, did not differ significantly from the control exposed area. Conclusions: The resin sealant Pro Seal® had a positive protective effect under white spot environmental area and Icon® infiltrant, although showed some protection, did not statistically differ from controls. Key words:Dental Caries, Orthodontics, Dental Enamel, Sealants.

RESUMO

Sodium butyrate-loaded nanoparticles coated chitosan (NaBu-loaded nanoparticles/CS) were developed to treat the choroidal neovascularization in wet age-related macular degeneration (AMD). The nanoparticles were produced by double emulsification and solvent evaporation technique, optimized by experimental statistical design, characterized by analytical methods, investigated in terms of in vitro and in vivo ocular biocompatibility, and evaluated as an antiangiogenic system in vivo. The NaBu-loaded nanoparticles/CS were 311.1 ± 3.1 nm in diameter with a 0.208 ± 0.007 polydispersity index; had a +56.3 ± 2.6 mV zeta potential; showed a 92.3 % NaBu encapsulation efficiency; and sustained the drug release over 35 days. The NaBu-loaded nanoparticles/CS showed no toxicity to human retinal pigment epithelium cells (ARPE-19 cells); was not irritant to the chorioallantoic membrane (CAM); did not interfere in the integrity of the retinal layers of rat's eyes, as detected by the Optical Coherence Tomography and histopathology; and inhibited the angiogenesis in CAM assay. The NaBu-loaded nanoparticles/CS could be a therapeutic alternative to limit the neovascularization in AMD.

Assuntos

RESUMO

Objective: The aim of this study was to analyze the microhardness of demineralized enamel following different treatments (fluoride varnish, Er:YAG laser, and Er:YAG laser associated with fluoride varnish). Methods: Forty-eight enamel blocks (4 × 4 × 7 mm) were divided into six groups (n = 8): (S) Sound; (DE) Demineralized; (DED) DE + Duraphat® 5% (fluoride varnish); (DEL20) DE + Er:YAG laser (20 mJ pulse mode; 0.20 W; 10 Hz; 60 sec; 1.18 J/cm2; 11.83 W/cm2); (DEL50) DE + Er:YAG laser (50 mJ pulse mode; 0.50 W; 10 Hz; 60 sec; 2.95 J/cm2; 29.58 W/cm2); (DEL20D) DE + Er:YAG laser (20 mJ) + Duraphat 5%. The irradiation was performed at 1 mm distance from the surface using a tip (AS7066X, L-14 mm, D-1.3 mm in diameter) in water/air spray refrigeration (level 6). The enamel blocks were submitted to pH cycling (4 h into DES solution +20 h into RE solution for 8 days and the solutions were changed every day). Knoop microhardness was measured (50 g/15 sec, six readings per sample) and data were analyzed by Kruskal-Wallis test at 5% significance. Results: After treatments, DF group showed higher microhardness values than all the groups. Also, DEL20D group showed similar results with H group according to the microhardness analysis (p < 0.05). Conclusions: It could be concluded that Duraphat 5% treatment showed better results when compared with all tested groups, however, the association of Er:YAG Laser 20 with Duraphat 5% also showed promising results.

Assuntos

RESUMO

[This corrects the article DOI: 10.3389/fbioe.2020.538203.].

RESUMO

The sponge implant has been applied as an important in vivo model for the study of inflammatory processes as it induces the migration, proliferation, and accumulation of inflammatory cells, angiogenesis, and extracellular matrix deposition in its trabeculae. The characterization of immune events in sponge implants would be useful in identifying the immunological events that could support the selection of an appropriate experimental model (mouse strain) and time post-implant analysis in optimized protocols for novel applications of this model such as in biomolecules screening. Here, the changes in histological/morphometric, immunophenotypic and functional features of infiltrating leukocytes (LEU) were assessed in sponge implants for Swiss, BALB/c, and C57BL/6 mice. A gradual increase of fibrovascular stroma and a progressive decrease in LEU infiltration, mainly composed of polymorphonuclear cells with progressive shift toward mononuclear cells at late time-points were observed over time. Usually, Swiss mice presented a more prominent immune response with late mixed pattern (pro-inflammatory/anti-inflammatory: IL-2/IFN-γ/IL-4/IL-10/IL-17) of cytokine production. While BALB/c mice showed an early activation of the innate response with a controlled cytokine profile (low inflammatory potential), C57BL/6 mice presented a typical early pro-inflammatory (IL-6/TNF/IFN-γ) response with persistent neutrophilic involvement. A rational selection of the ideal time-point/mouse-lineage would avoid bias or tendentious results. Criteria such as low number of increased biomarkers, no recruitment of cytotoxic response, minor cytokine production, and lower biomarker connectivity (described as biomarker signature analysis and network analysis) guided the choice of the best time-point for each model (Day5/Swiss; Day7/BALB/c; Day6/C57BL/6) with wide application for screening purposes, such as identification of therapeutic biomolecules, selection of antigens/adjuvants, and follow-up of innate and adaptive immune response to vaccines candidates.

RESUMO

Systemic arterial hypertension (SAH) is a major health problem around the world and its development has been associated with exceeding salt consumption by the modern society. The mechanisms by which salt consumption increase blood pressure (BP) involve several homeostatic systems but many details have not yet been fully elucidated. Evidences accumulated over the last 60 decades raised the involvement of the immune system in the hypertension development and opened a range of possibilities for new therapeutic targets. Green propolis is a promising natural product with potent anti-inflammatory properties acting on specific targets, most of them participating in the gut-brain axis of the sodium-dependent hypertension. New anti-hypertensive products reinforce the therapeutic arsenal improving the corollary of choices, especially in those cases where patients are resistant or refractory to conventional therapy. This review sought to bring the newest advances in the field articulating evidences that show a cross-talking between inflammation and the central mechanisms involved with the sodium-dependent hypertension as well as the stablished actions of green propolis and some of its biologically active compounds on the immune cells and cytokines that would be involved with its anti-hypertensive properties.

Assuntos

RESUMO

Data described in this article are related to the research article entitled "Amphotericin B-loaded Eudragit RL100 nanoparticles coated with hyaluronic acid (AMP EUD nanoparticles/HA) for the treatment of vulvovaginal candidiasis" [1]. In this work, we report original data on the statistical experimental design to formulate uncoated AMP EUD nanoparticles, data on the validation of spectrophotometric method to quantify the AMP released from uncoated EUD nanoparticles and coated with HA to obtain the in vitro drug release profiles as well as the drug encapsulation efficiency. In addition, we describe original data on characterization, including diameter size, polydispersity index, zeta potential, FTIR, DSC/TG, and XRD; data on diameter of in vitro inhibition halos of Candida albicans; and on the vaginal burden of infected animals treated with uncoated AMP EUD nanoparticles and AMP EUD nanoparticles/HA. Finally, different histological sections of endocervix collected from treated and untreated animals were inserted into this manuscript.

RESUMO

The objective of this study was to investigate the reproducibility of the International System for the Detection and Evaluation of Caries (ICDAS) for the diagnosis of caries by students of the Master's Degree in Dentistry (n = 25). The occlusal surfaces of human third molars (n = 14) were evaluated by twenty-five (n = 25) students using the ICDAS index and later a questionnaire was applied on demographic and professional context data. The dental crowns were sectioned in mesial to distal direction to obtain slices of 1mm in thickness which were observed in a stereomicroscope (40X) to identify the greatest extension of caries lesion. Data were analyzed by the Chi-Square, Fisher's Exact and Spearman's Correlation Coefficient at a significance level of 5%. There was an influence in the diagnosis of caries among students and teeth, where the majority of those who declared themselves to be safe missed the diagnosis. There was variability between the diagnosis and the proposed treatment for caries, with a better diagnosis for tooth VII and less for X; greater fit for treatment of teeth XIII, XIV and lower for IV, VI. The histological cut showed that the teeth were more affected by caries than the ICDAS. It was concluded that the ICDAS reproducibility was partially satisfactory when the occlusal surface was evaluated by the master's degree students. (AU).

Este trabalho teve o objetivo de investigar a reprodutibilidade do Sistema Internacional de Detecção e Avaliação de Cárie (ICDAS) para o diagnóstico da cárie, por estudantes de curso de Mestrado em Odontologia (n=25). As superfícies oclusais de terceiros molares humanos (n=14) foram avaliadas por vinte e cinco (n=25) estudantes, utilizando o índice ICDAS, e posteriormente foi aplicado questionário sobre dados demográficos e de contexto profissional. As coroas dentárias foram seccionadas no sentido mésio distal para obter fatias de 1 mm de espessura, que foram observadas em estereomicroscópio (40X) para identificar a maior extensão da lesão de cárie. Os dados foram analisados pelos Testes Qui-Quadrado, Exato de Fisher e Coeficiente de Correlação de Spearman, em nível de significância de 5%. Houve influência do grau de instrução dos estudantes no diagnóstico da cárie em relação ao dente avaliado e a maioria que se declarou segura errou o diagnóstico. Houve variabilidade entre o diagnóstico e o tratamento proposto para a cárie, com maior acerto para diagnóstico do dente VII e menor para o X; maior acerto para tratamento dos dentes XIII, XIV e menor para IV, VI. O corte histológico mostrou que os dentes estavam mais comprometidos pela cárie que o ICDAS. Concluiu-se que a reprodutibilidade do ICDAS foi satisfatória quando a superfície oclusal foi avaliada pelos mestrandos. (AU).

RESUMO

The occurrence of inflammation and protein malnutrition is an aggravating risk factor for morbidity and mortality in the clinical setting. The green propolis, a natural product made by Apis mellifera bees from Baccharis dracunculifolia resin, has therapeutic potential to modulate chronic inflammation. However, its effect on inflammation in an impaired nutritional status is not known. The aim of this study was to characterize the effects of the administration of the hydroalcoholic extract of the green propolis in the chronic inflammatory process of mice submitted to a low-protein diet. For this, we used the subcutaneous implantation of sponge disks as an inflammatory model and the animals were distributed in the following groups: standard protein diet (12% protein content), control treatment; standard protein diet, propolis treatment; low-protein diet (3% protein content), control treatment; low-protein diet, propolis treatment. Propolis was given daily at a dose of 500 mg/kg (p.o.) during a period of 7 or 15 days. Our main findings show that animals fed with standard protein diet and treated with propolis had low levels of red blood cells, hemoglobin, and hematocrit, with the subsequent reestablishment of these levels, in addition to monocyte count elevation and higher TNF levels after one week of treatment. In the low-protein diet group, the propolis treatment provided a significant recovery in weight and maintenance of total serum protein levels at the end of two weeks of treatment. Histological analysis showed propolis reduced the inflammatory infiltrate in the sponges of both standard and low-protein diet groups. In addition, the propolis extract presented antiangiogenic effect in both groups. Therefore, our data suggests that the hydroalcoholic extract of the green propolis promotes weight recovery and avoid the reduction of protein levels, in addition to inhibit inflammation and angiogenesis in animals fed with a low-protein diet.

Assuntos

RESUMO

Vulvovaginal candidiasis is an inflammation localized in the vulvovaginal area. It is mostly caused by Candida albicans. Its treatment is based on the systemic and local administration of antifungal drugs. However, this conventional therapy can fail owing to the resistance of the Candida species and noncompliance of patients. Amphotericin B-loaded poly(lactic-co-glycolic acid) nanofibers are single-use, antifungal, controlled drug delivery systems, and represent an alternative therapeutic scheme for the local treatment of vulvovaginal candidiasis. Nanofibers were characterized by analytical techniques and with an in vitro drug delivery study. In vitro and in vivo fungicidal activity of amphotericin B released from nanofibers was evaluated using the agar diffusion method and an experimental murine model of vulvovaginal candidiasis, respectively. Analytical techniques showed that amphotericin B was physically mixed in the polymeric nanofibers. Nanofibers controlled the delivery of therapeutic doses of amphotericin B for 8 consecutive days, providing effective in vitro antifungal activity and eliminated the in vivo vaginal fungal burden after 3 days of treatment and with only one local application. Amphotericin B-loaded poly(lactic-co-glycolic acid) nanofibers could be potentially applied as an alternative strategy for the local treatment of vulvovaginal candidiasis without inducing fungal resistance, yet ensuring patient compliance.

Assuntos

RESUMO

Bonding of fiber posts using self-adhesive resin cement to radicular dentin is controversial. The aim was to evaluate the effect of conditioning of polyacrylic acid on the longevity of bonding of self-adhesive resin cement to dentin. Thirty six single rooted pre molars were divided into 3 groups (n=12) ARC: ScotchBond Multi Purpose + RelyX™ARC; U: RelyX™U200; PU: 11.5% Polyacrylic acid + RelyX™U200. After conditioning of the dentin, the resin cement and the post were inserted and light-activated for 60s (1200mw/cm2 ) and stored in distilled water (24h/37ºC). Two discs of 1 mm thickness were obtained from each root-third and tested in push-out (0.5mm/min) after 24 hours and 6 months. For statistical purposes, the data from the root-thirds were grouped and the bond strength (in MPa) was analyzed using Two-Way Analysis of Variance and Tukey's post-hoc test at 5%. The power of the test was calculated. The bonding of the U at 6 months was higher than PU at both times (p<0.001). There were no differences for time (p=0.153) or for the interaction of treatment x time (p=0.090). Adhesive fractures between the cement and dentin were prevalent. The power test was 0.97. The bonding of the RelyX™U200 was influenced by the dentin pre-treatment with poliacrylic acid and the bonding of all groups remained stable for 6 months. (AU).

A adesão de pino de fibra de vidro com cimento resinoso autoadesivo à dentina é controversa. Foi objetivo avaliar o efeito do condicionamento da dentina com ácido poliacrílico na longevidade da adesão de cimento resinoso autoadesivo. Trinta e seis raízes de pré-molares uni radiculados foram divididas em 3 grupos (n=12) ARC: ScotchBond Multi Purpose + RelyX™ARC; U: RelyX™U200; PU: Ácido poliacrílico 11,5% + RelyX™U200. Após condicionamento da dentina, o cimento resinoso e o pino de fibra de vidro foram inseridos, fotoativados por 60s (1200mw/cm2 ) e armazenados em água destilada (24h/37ºC). Dois discos de dentina de 1 mm de espessura foram obtidos de cada terço radicular e testados em push-out (0.5mm/min) após 24 houras e 6 meses. Para análise estatística, os dados dos terços radiculares foram agrupados e resistência adesiva (em MPa) analisada por Análise de Variância de dois fatores e teste de Tukey a 5%. O poder do teste foi calculado. A adesão de the U após 6 meses foi maior que a de PU nos dois períodos (p<0,001). Não houve diferença para o fator tempo (p=0,153) nem para a interação tratamento x tempo (p=0,090). Fraturas adesivas prevaleceram entre cimento e dentina. O poder do teste calculado foi de 0,97. A adesão do RelyX™U200 foi influenciada pelo pré-tratamento da dentina com ácido poliacrílico e a adesão de todos os grupos se manteve estável até 6 meses. (AU).

RESUMO

The study aims to evaluate the bond strength of sealants on deciduous molars. Clinpro ™ XT, Vitremer ™, Fluroshield and Optibond FL materials were applied to the occlusal surface of 40 deciduous lower molars (n = 5). The teeth were prepared for the micro tensile test, obtaining a specimen in a stick format with a cross-sectional area of 0.8 mm2 . After 24 hours and 6 months of restorative procedures, the specimens were traversed in universal test machine. The statistical analysis used the tooth as experimental unit, considering the adhesive and mixed fractures data, through Variance Analysis of repeated measures and Tukey tests (α = 0.05). There was a difference among the adhesion of the materials in 24 h, with higher union strength for Optibond FL (31.20 ± 1.36 MPa), significantly higher than that of Clinpro ™ XT (20.23 ± 1.16 MPa), Fluroshield (24.61 ± 2.76 MPa) and Vitremer™ (21.31 ± 2.32 MPa), which were similar. After 6 months of storage, the Clinpro ™ XT bond strength remained (22.18 ± 2.91 MPa), Optibond FL decreased (20.77 ± 1.53 MPa), but remained similar to that of Clinpro ™ XT in 6 months. The lowest adhesion values at 6 months were of Fluroshield (11.14 ± 1.98 Mpa) and Vitremer (5.29 ± 0.58 Mpa). It was concluded that the bond strength of the sealants to the occlusal surface of the deciduous molars was influenced by the material, with Clinpro ™ XT being the only material that maintained the bond strength values after 6 months. (AU).

O presente estudo teve como objetivo avaliar a adesão de selantes em molares decíduos. Os materiais Clinpro™ XT, VitremerTM, Fluroshield e Optibond FL foram aplicados na superfície oclusal de 40 molares inferiores decíduos (n=5). Os dentes foram preparados para o ensaio de microtração, com obtenção de corpo-de-prova em formato de palito com área de seção transversal de 0,8 mm2 . Após 24 horas e 6 meses da realização dos procedimentos restauradores, os espécimes foram tracionados em máquina de ensaio universal. A análise estatística usou como unidade experimental o dente, considerando os dados de fraturas adesivas e mistas, pelos testes de Análise de Variância de medidas repetidas e Tukey (α=0,05). Houve diferença entre a adesão dos materiais em 24 h, com maior resistência de união para o Optibond FL (31,20 ±1,36 MPa), significativamente maior que a do Clinpro™ XT (20,23 ±1,16 MPa); Fluroshield (24,61 ±2,76 MPa) e VitremerTM (21,31 ±2,32 MPa) foram semelhantes. Decorridos 6 meses de armazenamento, a resistência de união do Clinpro™ XT se manteve (22,18 ±2,91 MPa) e a do Optibond FL diminuiu (20,77 ±1,53 MPa) mas se manteve semelhante à do Clinpro™ XT em 6 meses. Os menores valores de adesão em 6 meses foram do Fluroshield (11,14 ±1,98 Mpa) e do Vitremer (5,29 ±0,58 Mpa). Concluiu-se que a resistência de união dos selantes à superfície oclusal dos molares decíduos foi influenciada pelo material, sendo o Clinpro™ XT o único material que manteve os valores de resistência de união após 6 meses. (AU).

RESUMO

To evaluate the treatment of eroded dentin (Sensodyne Repair & Protect™, Er:YAG laser and combinations). The occlusal surfaces of 25 third molars were sectioned 1.5 mm in thickness. After an erosion cycle (5 min in demineralizing solution + 3 h in remineralizing solution; six cycles a day for 8 days), the samples were divided into five groups (n = 5): (E) erosion - control; (ES) erosion + Sensodyne Repair & Protect (NovaMin); (EL) erosion + Er:YAG laser (40 mJ, 10 Hz, 0.4 W, 50 µs, 3.1 J/cm2, 63 W/cm2); (ELS) erosion + Er:YAG laser + Sensodyne; and (ESL) erosion + Sensodyne + Er:YAG laser. Following storage in ultrapure water (37 °C/14 days), the Ca/P ratio was evaluated by EDXRF and the morphology surfaces examined in SEM. The percentage of exposed dentin tubules was calculated. One-way analysis of variance and Tukey's test at 5% were used to treat the data. The Ca/P ratio was higher in E and ES groups. More exposed dentin tubules were found in E group and less exposed tubules were found in the ES group (p < 0.0001). When the toothpaste and laser were combined, the number of occluded dentin tubules was higher when laser was performed first (ELS). A positive effect was found when the laser and toothpaste were combined.

Assuntos

RESUMO

PURPOSE: Evaluate the bond strength of different translucent fiber posts in the cervical, middle, and apical root thirds cemented with self-adhesive resin cement. MATERIALS AND METHODS: Sixty single-rooted teeth were randomly divided into five groups according to the fiber post used: Reforpost (opaque [control]), exacto, white post, radix, and Macro-Lock Illusion X-RO. The roots were subjected to chemomechanical preparation and cemented with self-adhesive resin cement. The teeth were sectioned into slices of the different root thirds and tested for bond strength (push-out). Two-way analysis of variance and Bonferroni test were used to verify statistical differences between groups (P < 0.05). RESULTS: No significant difference between the root thirds was detected (P > 0.05). However, the performance of the posts demonstrated a significant difference (P < 0.05). RDX had a lower performance in the apical third (P < 0.05). The other fiber posts had the same performance irrespective of the root third evaluated. The predominant failure pattern was adhesive between resin cement and root dentin. CONCLUSION: In general, the different translucent fiber posts showed the same performance. Yet, translucent fiber posts did not show superior bond strength compared with the opaque fiber post in any of the root thirds evaluated.

RESUMO

The purpose of this study was to evaluate the microshear bond strength of ceramic prosthetic structures reinforced by lithium disilicate cemented with resin cement under conditions of different surface treatments and adhesive systems. Seventy-two rectangular blocks of lithium disilicate (6.5 mm long × 5 mm wide × 1 mm thick) were fabricated, air abraded with 50-µm Al2O3 particles and divided into six groups (n=12) depending on the surface pretreatments. The groups were as follows: 10HF/S/SBM: 10% hydrofluoric acid etched for 20 s (10HF) + silane (S) + Adper Scotchbond Multi-Purpose (SBM); 10HF/S/SB: 10HF + S + Single Bond Universal (SB); 10HF/SBM; 10HF/SB; S/SBM and S/SB. Two 1-mm-long plastic tubes were placed on the specimens, filled with RelyX ARC resin cement and cured for 20 s per tube. The plastic tube was removed, and the microshear bond strength was tested. Data were submitted to analysis of variance and Tukey's tests (α=0.05). Fractured specimens were observed under optical microscopy. For both adhesives, the bond strengths (MPa) of groups treated with acid-etching and silane (10HF/S/SB: 24.82, 10HF/S/SBM: 24.90) were higher (p<0.001) than those of groups treated with acid-etching (10HF/SB: 16.47, 10HF/SBM: 19.94) only or only silane (S/SB: 18.42, S/SBM: 13.24). All groups showed a predominance of failure adhesive. The silanization should be a clinical step in cementing ceramic structures reinforced by lithium disilicate, even with the application of universal adhesive that contains silane in its formulation.

Assuntos

RESUMO

Abstract The purpose of this study was to evaluate the microshear bond strength of ceramic prosthetic structures reinforced by lithium disilicate cemented with resin cement under conditions of different surface treatments and adhesive systems. Seventy-two rectangular blocks of lithium disilicate (6.5 mm long × 5 mm wide × 1 mm thick) were fabricated, air abraded with 50-μm Al2O3 particles and divided into six groups (n=12) depending on the surface pretreatments. The groups were as follows: 10HF/S/SBM: 10% hydrofluoric acid etched for 20 s (10HF) + silane (S) + Adper Scotchbond Multi-Purpose (SBM); 10HF/S/SB: 10HF + S + Single Bond Universal (SB); 10HF/SBM; 10HF/SB; S/SBM and S/SB. Two 1-mm-long plastic tubes were placed on the specimens, filled with RelyX ARC resin cement and cured for 20 s per tube. The plastic tube was removed, and the microshear bond strength was tested. Data were submitted to analysis of variance and Tukey's tests (α=0.05). Fractured specimens were observed under optical microscopy. For both adhesives, the bond strengths (MPa) of groups treated with acid-etching and silane (10HF/S/SB: 24.82, 10HF/S/SBM: 24.90) were higher (p<0.001) than those of groups treated with acid-etching (10HF/SB: 16.47, 10HF/SBM: 19.94) only or only silane (S/SB: 18.42, S/SBM: 13.24). All groups showed a predominance of failure adhesive. The silanization should be a clinical step in cementing ceramic structures reinforced by lithium disilicate, even with the application of universal adhesive that contains silane in its formulation.

Resumo O objetivo neste estudo foi avaliar a resistência de união ao microcisalhamento de estruturas protéticas cerâmicas reforçadas por dissilicato de lítio cimentadas com cimento resinoso sob diferentes tratamentos de superfície e sistemas adesivos. Setenta e duas barras retangulares de dissilicato de lítio (6,5 mm de comprimento × 5 mm de largura × 1 mm de espessura) foram fabricadas, tratados com partículas de Al2O3 (50 μm) e dividido em seis grupos (n=12) dependendo dos pré-tratamentos de superfície. Os grupos foram como se segue: 10HF/S/SBM: condicionamento com ácido fluorídrico 10% durante 20 s (10HF) + silano (S) + Adper Scotchbond Multi-Purpose (SBM); 10HF/S/SB: 10HF + S + Single Bond Universal (SB); 10HF/SBM; 10HF/SB; S/SBM; e S/SB. Dois tubos plásticos cilíndricos de 1 mm de comprimento foram colocados sobre os espécimes, preenchidos com cimento RelyX ARC e fotoativado durante 20 s por tubo. Os tubos plásticos foram removidos e a resistência de união ao microcisalhamento foi testada. Os dados foram submetidos à análise de variância e ao teste de Tukey (α=0,05). Espécimes fraturados foram observados sob microscopia óptica. Para ambos os adesivos, a resistência de união (MPa) dos grupos tratados com condicionamento ácido e silano (10HF/S/SB: 24,82, 10HF/S/SBM: 24,90) foram superiores (p<0.001) aos grupos tratados com condicionamento ácido apenas (10HF/SB: 16,47, 10HF/SBM: 19,94) ou apenas silano (S/SB: 18,42, S/SBM: 13,24). Todos os grupos apresentaram uma predominância de falha adesiva. A silanização deve ser um passo clínico em cimentação de estruturas cerâmicas reforçadas por dissilicato de lítio, mesmo com a aplicação do adesivo universal que contém em sua formulação um silano.

Assuntos