RESUMO
This article presents a study on the tensile properties of knitted fabrics commonly employed in polymeric matrix textile composites. The key mechanical parameters investigated include stress (Pa), strain, Young's modulus (Pa), and work of rupture (J). The knitted fabrics were developed using the Cixing Knitting System software and subsequently manufactured using a double jersey (electronic) flat knitting machine. The primary objective of this research was to explore the impact of various factors on the mechanical behavior of these knitted fabrics. The factors studied were wale and course directions, float stitch density, loop length (cm), and the type of synthetic knitting yarns used (100% polyester and 100% polyamide) along with different combinations of knitting yarns (100% cotton and 67% polyester/33% cotton hybrid). The adopted ASTM D 5034 standard, Response Surface Methodology (RSM), and Analysis of Variance (ANOVA) were employed to evaluate the mechanical performance of these fabric structures. The findings of the study revealed that the statistical adjustment of the data set for stress, strain, Young's modulus, and work of rupture in knitted fabric structures significantly reduced the standard deviations for mechanical responses. This information holds particular significance as it pertains to the frequent use of these knitted fabric structures as reinforcement in textile-reinforced composite materials. Overall, this study sheds light on the mechanical behavior in structures of knitted fabrics used in polymeric matrix composites, providing valuable insights for the design and optimization of advanced textile-based materials.
RESUMO
The use of Kevlar in the field of ballistic and stabbing protection has been studied by researchers in polymeric composites for this purpose. This study presents complementary knowledge on energy absorption and dissipation in ρ-aramid fabric impregnated with shear thickening fluids (STFs), especially aiming to obtain better protection against impacts that are deeply associated with STFs, as well as color change, accelerated aging (QUV), and penetration depth (drop tower test). In addition, Scanning Electron Microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR) was performed. The research shows that there was a good distribution of STF particles on the ρ-Aramid fabric surface, promoting increased friction between the interfilament and the yarns, further increasing performance and, consequently, improving the energy absorption and dissipation mechanism and, also, the penetration effectiveness in relation to non-impregnated ρ-Aramid fabric. Regarding the protection efficiency against UV exposure (250-400 nm region), there was a significantly decreased compared to those non-impregnated Kevlar® woven with STFs. The FTIR analysis showed that the conditions of aging, after exposure to UV, did not produce new functional groups, that is, there was no chemical modification. Finally, Kevlar fabric impregnated with STFs improved penetration depth performance with the blades independent of the blade type with up to 81% increase in resistance. This result was improved due to interactions between the nanoparticles present in STFs, yarns, and even high-performance woven impregnated with shear-thickening fluids.
RESUMO
Primary Effusion Lymphoma is an extremely rare and aggressive subtype of B-cell lymphoma, accounting for only <1% of all cases of this neoplasm. It has a unique clinical presentation because it has a predilection for appearing in body cavities, such as the pleural space, pericardium and peritoneum. It mainly affects immunocompromised individuals and may also affect individuals in the Mediterranean region and in areas endemic for human herpesvirus 8 (HHV-8). Herein, we report the case of an 83-year-old immunocompetent male complaining of coughing, fever and progressive dyspnea for 3 days. His past medical history revealed a recurrent pleural effusion for the last three years, as well as losing weight and malaise. A subsequent investigation revealed a PEL diagnosis of the pleura.
RESUMO
INTRODUCTION: Activation of the phosphatidylinositol 3-kinase (PI3K)/AKT pathway plays a critical role in carcinogenesis and resistance to anticancer drugs. In this study, gastric carcinomas (GC) were investigated and statistical analyses were performed concerning the correlation between the clinicopathological features and activation of the PI3K/AKT pathway. MATERIAL AND METHODS: Immunohistochemistry for p-AKT, p-mTOR and PTEN was performed in 239 GC and 200 non-neoplastic gastric tissues. The clinicopathological parameters were recorded from the medical charts. Statistical significance was defined by a p-value < 0.05. RESULTS: High p-AKT expression was observed in 10% of the normal gastric tissue and in 90% of GC, and it was significantly associated with tumor size (p < 0.001), T3/T4 tumors (p < 0.001), and presence of metastases (p = 0.02). Similarly, p-mTOR positivity was found in GC cells, but not in the normal gastric mucosa, and was correlated with perineural invasion (p = 0.02) and T3/T4 tumors (p = 0.03). On the other hand, PTEN expression was weak and focal in the tumor cells, while in the normal gastric tissue this staining was strong and diffuse. Importantly, the expression of p-mTOR and PTEN was associated with overall survival. CONCLUSIONS: The results of the present study, characterized by the loss of PTEN expression and higher expression of p-AKT and p-mTOR in the majority of tumor cells, apparently are implicated in the carcinogenesis and progression of GC. The identification of p-mTOR and PTEN expression as prognostic factors corroborates the identification and use of potential target drugs that could be more efficient for the treatment of these patients.
RESUMO
The process of product development has received special attention as it is being recognized as a source of competitive gain. Through its systematic use companies reduce costs, increase quality and decrease development time. However, one can find products being launched on the market that cause dissatisfaction to its users, and in consequence if the customer feels harmed or injured he will no longer purchase a product from the same brand. This in regard only to the commercial aspect; usually the danger of an accident or injury is not even thought about. This paper is the basis of the dissertation master's degree and used a literature research to build the repertoire, analyzing the methodologies applied by product design engineers, designers and ergonomists. The analysis results demonstrate the inefficiency of the design methodologies ergonomic issues. The contribution of this work lies in the suggestion to include ergonomic tools in all phases of product development and the presentation of a table with the tools that points out its most suitable time of application and results.