RESUMO

Two novel and simple donor-π-bridge-donor (D-π-D) hole-transporting materials (HTMs) containing two units of the p-methoxytriphenylamine (TPA) electron donor group covalently bridged by means of the 3,4-dimethoxyselenophene spacer through single and triple bonds are reported. The optoelectronic and thermal properties of the new selenium-containing HTMs have been determined using standard experimental techniques and theoretical density functional theory (DFT) calculations. The selenium-based HTMs have been incorporated in mesoporous perovskite solar cells (PSCs) in combination with the triple-cation perovskite [(FAPbI3 )0.87 (MAPbBr3 )0.13 ]0.92 [CsPbI3 ]0.08 . Limited values of power conversion efficiencies, up to 13.4 %, in comparison with the archetype spiro-OMeTAD (17.8 %), were obtained. The reduced efficiencies showed by the new HTMs are attributed to their poor film-forming ability, which constrains their photovoltaic performance due to the appearance of structural defects (pinholes).

RESUMO

Invited for this month's cover are the collaborating groups of Dr. Margarita Suárez at Universidad de La Habana, Cuba, and Dr. Nazario Martín at Universidad Complutense de Madrid, Spain, together with groups at other institutions worldwide. The Front Cover shows a representation of the H2 @C60 hybrid molecule with a dehydroepiandrosterone moiety interacting with the active site of the SARS Cov-2. Read the full text of the article at 10.1002/cplu.202000770.

RESUMO

We report the synthesis and characterization of a fullerene-steroid hybrid that contains H2 @C60 and a dehydroepiandrosterone moiety synthesized by a cyclopropanation reaction with 76 % yield. Theoretical calculations at the DFT-D3(BJ)/PBE 6-311G(d,p) level predict the most stable conformation and that the saturation of a double bond is the main factor causing the upfield shielding of the signal appearing at -3.13 ppm, which corresponds to the H2 located inside the fullerene cage. Relevant stereoelectronic parameters were also investigated and reinforce the idea that electronic interactions must be considered to develop studies on chemical-biological interactions. A molecular docking simulation predicted that the binding energy values for the protease-hybrid complexes were -9.9 kcal/mol and -13.5 kcal/mol for PLpro and 3CLpro respectively, indicating the potential use of the synthesized steroid-H2 @C60 as anti-SARS-Cov-2 agent.

Assuntos

RESUMO

Three novel donor-π-bridge-donor (D-π-D) hole-transporting materials (HTMs) featuring triazatruxene electron-donating units bridged by different 3,4-ethylenedioxythiophene (EDOT) π-conjugated linkers have been synthesized, characterized, and implemented in mesoporous perovskite solar cells (PSCs). The optoelectronic properties of the new dumbbell-shaped derivatives (DTTXs) are highly influenced by the chemical structure of the EDOT-based linker. Red-shifted absorption and emission and a stronger donor ability were observed in passing from DTTX-1 to DTTX-2 due to the extended π-conjugation. DTTX-3 featured an intramolecular charge transfer between the external triazatruxene units and the azomethine-EDOT central scaffold, resulting in a more pronounced redshift. The three new derivatives have been tested in combination with the state-of-the-art triple-cation perovskite [(FAPbI3 )0.87 (MAPbBr3 )0.13 ]0.92 [CsPbI3 ]0.08 in standard mesoporous PSCs. Remarkable power conversion efficiencies of 17.48 % and 18.30 % were measured for DTTX-1 and DTTX-2, respectively, close to that measured for the benchmarking HTM spiro-OMeTAD (18.92 %), under 100 mA cm-2 AM 1.5G solar illumination. PSCs with DTTX-3 reached a PCE value of 12.68 %, which is attributed to the poorer film formation in comparison to DTTX-1 and DTTX-2. These PCE values are in perfect agreement with the conductivity and hole mobility values determined for the new compounds and spiro-OMeTAD. Steady-state photoluminescence further confirmed the potential of DTTX-1 and DTTX-2 for hole-transport applications as an alternative to spiro-OMeTAD.

RESUMO

The reaction of C60 with pregnen-20-carboxaldehyde, a biologically active synthetic steroid, by using a 1,3-dipolar cycloaddition reaction (Prato's protocol) results in the formation of pyrrolidine rings bearing a new stereogenic center on the C2 of the five-membered ring. The formation of the fullerene-steroid hybrids proceeds with preference for the Re face of the 1,3-dipole, with formation of a diastereomeric mixture in 73:15 ratio. The investigation of the chiroptical properties of these conjugates allowed determining the absolute configuration of the new fulleropyrrolidines. In addition, a thorough spectroscopical study permitted to determine the structure of the two mono-cycloadducts. The electrochemical properties of the new hybrids were also evaluated by cyclic voltammetry, both systems exhibit three quasi-reversible reduction waves which are cathodically shifted in regard to the parent C60. Theoretical calculations help supporting the experimental data. A conformational study combining semiempirical methods and density functional theory has predicted the most stable diastereomer. On the basis of this agreement, a possible reaction mechanism is presented. Additionally, a molecular docking simulation has been carried out using the HIV-1 protease as receptor, thus paving the way to study the possible application of these stereoisomers in biomedicine.

RESUMO

The diastereoselective synthesis of cis and trans steroid-fulleropyrrolidines hybrids by reaction of N-metalated azomethine ylides [Cu(II) or Ag(I)] with the appropriate chiral ligand and C60 is described. The experimental findings reveal that the azomethine ylide stabilized by an allylic group cycloadds to [60]fullerene in an efficient manner and with a good diastereomeric excess. Furthermore, the new generated stereocenters are fully controlled by the catalytic systems used without being influenced by the chirality of the steroid. Interestingly, by this synthetic methodology the each one of the four possible stereoisomers have efficiently been obtained and characterized by CD spectra.

RESUMO

The retro-cycloaddition thermal reaction of isoxazolino[4,5:1,2][60]fullerenes to pristine fullerene seems to be guided by the electronic nature of the substituted nitrile oxide 1,3-dipole in the isoxazoline ring. Trapping experiments proved that the reaction mechanism occurs by thermal removal of the nitrile oxide 1,3-dipole in a process that is favored in the presence of a big excess of a highly efficient dipolarophile such as maleic anhydride. Theoretical gas phase calculations carried out at the B3LYP/6-31G(d) and M06-2X/6-31G(d) levels of theory underpin the experimental findings and predict that compound 1c, bearing the p-(CH3)2N-Ph substituent on the isoxazoline ring and with a remarkable experimental conversion efficiency in just 12 h, showed the lowest activation energy. Solvent calculations have predicted the same behavior in gas phase. Different approaches such as electrostatic natural population analysis and Houk's distortion/interaction model have been applied to understand how the electronic nature of these substituents affects the retro-cycloaddition reaction process. Analysis of the values of the condensed Fukui functions and dual descriptor shed light on the mechanism of the retro-cycloaddition reaction.

RESUMO

RATIONALE: We have investigated the fragmentation reactions of ions from bis-adducts containing isoxazolino-, pyrrolidino- and methanofullerene moieties. METHODS: The fragmentation reactions induced by collision-induced dissociation (CID) of ions generated under electrospray ionization (ESI) in positive and negative modes of detection using an ion-trap spectrometer have been investigated. RESULTS: The competitive retro-cycloaddition process between isoxazoline and pyrrolidine rings fused to [60]fullerene reveals that it is strongly dependent on the experimental negative or positive ESI experimental conditions. Thus, whereas retro-cycloaddition reaction is favored in the pyrrolidine ring under negative conditions, the protonation occurring on the nitrogen atom of the pyrrolidine ring under positive conditions precludes its retro-cycloaddition and, therefore, only the isoxazoline ring undergoes the retro-cycloaddition process. The obtained experimental results are different from those reported when the reaction is carried out under thermal conditions. Competitive retro-cycloaddition reactions of isoxazolino- and methanofullerenes show that the heterocyclic ring undergoes cycloelimination, leaving the methanofullerene moiety unchanged. In this case, the same selectivity is observed under thermal and gas-phase conditions. CONCLUSIONS: The observed selectivity in the heterocyclic removal in these [60]fullerene derivatives is reversed from negative conditions (radical anions) to positive conditions (protonated molecules). Moreover, the retro-cycloaddition reaction behaves differently under spectrometric and thermal conditions.

RESUMO

Here we report on the self-organization characteristics in water of two diastereomer pairs of fullerene-androsterone hybrids that have the hydrophobic C60 appendage in the A and D ring of the androsterone moiety, respectively. The morphology and particle size in aqueous solution were determined by transmission electron microscopy (TEM) and dynamic light scattering (DLS), with satisfactory agreement between both techniques. In general, these fullerene derivatives are shown to organize into spherical nano-scale structures with diameters in the ranges of 10-20 and 30-50 nm, respectively.

RESUMO

New [60]fullerene-steroid conjugates (4-6) have been synthesized by 1,3-dipolar cycloaddition and Bingel-Hirsch cyclopropanation reactions from suitably functionalized epiandrosterone and [60]fullerene. Since a new stereocenter is created in the formation of the Prato monoaduct, two different diastereomers were isolated by HPLC (4, 5) whose absolute configurations were assigned according to the highly reliable "sector rule" on fullerenes. A further reaction of the malonate-containing diastereomer 5 with a second C60 molecule has afforded dumbbell fullerene 6 in which the two fullerene units are covalently connected through an epiandrosterone moiety. The new compounds have been spectroscopically characterized and their redox potentials, determined by cyclic voltametry, reveal three reversible reduction waves for hybrids 4 and 5, whereas these signals are split in dumbbell 6. Theoretical calculations at semiempirical (AM1) and single point B3LYP/6-31G(d) levels have predicted the most stable conformations for the hybrid compounds (4-6), showing the importance of the chlorine atom on the D ring of the steroid. Furthermore, TDDFT calculations have allowed assignments of the experimentally determined circular dichroism (CD) of the [60]fullerene-steroid hybrids based on the sign and position of the Cotton effects, despite the exceptionally large systems under study.

Assuntos

RESUMO

The design and synthesis of fullerene-steroid hybrids by using Prato's protocol has afforded new fullerene derivatives endowed with epiandrosterone, an important naturally occurring steroid hormone. Since the formation of the pyrrolidine ring resulting from the 1,3-dipolar cyloaddition reaction takes place with generation of a new stereogenic center on the C2 of the five-membered ring, the reaction proceeds with formation of a diastereomeric mixture [compounds 6 and 7 in 70:30 ratio, 8 and 9 in 26:74 ratio (HPLC)] in which the formation of the major diasteroisomers 6 and 9 is consistent with an electrophilic attack of [60]fullerene on the Re face of the azomethine ylide directed by the steroidic unit. The chiroptical properties of these conjugates reveal typical Cotton effects in CD spectra that have been used to assign the absolute configuration of the new fulleropyrrolidines. The electrochemical study of the new compounds reveals the presence of four quasi-reversible reduction waves which are cathodically shifted in comparison with the parent C60, thus ascertaining the proposed structures.

Assuntos

RESUMO

A facile, efficient and environment-friendly protocol for the synthesis of 6-chloro-5-formyl-1,4-dihydropyridine derivatives has been developed by the convenient ultrasound-mediated reaction of 2(1H)pyridone derivatives with the Vilsmeier-Haack reagent. This method provides several advantages over current reaction methodologies including a simpler work-up procedure, shorter reaction times and higher yields.

Assuntos

RESUMO

The condensation of Meldrum's acid, aromatic aldehydes, alkyl acetoacetates and ammonium acetate in glacial acetic acid under ultrasound irradiation at room temperature results in the formation of 3,4-dihydropyridone derivatives (4a-p) in 85-96% yields. Compared with conventional methods, the main advantages of the present procedure are milder conditions, shorter reaction times and higher yields.

Assuntos

RESUMO

The synthesis and in-vitro antiprotozoal evaluation of novel N(4)-(benzyl)spermidyl-linked bis(1,3,5-thiadiazinane-2-thione) (bis-THTT) derivatives from N(4)-(benzyl)spermidine is disclosed. Several of the new bis-THTT have in-vitro activities against L. donovani and T. cruzi that are comparable or superior to those of currently employed protozoocidal agents.

Assuntos

RESUMO

Based on experimental evidence and DFT studies, a probable cyclization route to 1,3,5-thiadiazinanes-2-thiones in aqueous medium is proposed. Experimental facts suggest the formation of a {[hydroxymethyl (substituted) carbamothioyl] sulfanyl}methanol intermediate via reaction of dithiocarbamate (DTC) and formaldehyde. Nucleophilic addition of glycine to this intermediate generates an adduct that undergoes intramolecular heterocyclization via an S(N)2 reaction. Computational calculations predict an active role of water in the reaction mechanism that promotes intramolecular cyclization.

Assuntos

RESUMO

The 1H and 13C NMR spectroscopic data for 4-aryl-1,4,5,6,7,8-hexahydro-2,7,7,5-oxo-quinoline 3-substituted derivatives have been fully assigned by the combination of one- and two dimensional experiments (DEPT, HMBC, HMQC, COSY, NOE).

Assuntos

RESUMO

The 1,3-dipolar cycloaddition of azomethine ylides bearing the biologically active 1,4-dihydropiridine ring to C(60) was investigated by means of quantum mechanical calculations at the semiempirical AM1 and DFT (B3LYP/6-31G) methods. The presence of two chiral centers and one chiral axis in the resulting fulleropyrrolidines leads to four possible [6,6] cycloaddition products. Formation of atropoisomers has also been considered. The transition-state structures were computed for the four different cycloaddition pathways to find out the lowest activation energy stereoisomer. In all cases, a frequency analysis and an IRC calculation were carried out to fully characterize the located transition-state structures. AM1 results and single-point energy calculations at the B3LYP/6-31G//AM1 level for the four transition-state structures yield activation energies values below 5 kcal/mol.