RESUMO

A little-studied p-type ternary oxide semiconductor, copper(I) tungstate (Cu2WO4), was assessed by a combined theoretical/experimental approach. A detailed computational study was performed to solve the long-standing debate on the space group of Cu2WO4, which was determined to be triclinic P1. Cu2WO4 was synthesized by a time-efficient, arc-melting method, and the crystalline reddish particulate product showed broad-band absorption in the UV-visible spectral region, thermal stability up to ∼260 °C, and cathodic photoelectrochemical activity. Controlled thermal oxidation of copper from the Cu(I) to Cu(II) oxidation state showed that the crystal lattice could accommodate Cu2+ cations up to ∼260 °C, beyond which the compound was converted to CuO and CuWO4. This process was monitored by powder X-ray diffraction and X-ray photoelectron spectroscopy. The electronic band structure of Cu2WO4 was contrasted with that of the Cu(II) counterpart, CuWO4 using spin-polarized density functional theory (DFT). Finally, the compound Cu2WO4 was determined to have a high-lying (negative potential) conduction band edge underlining its promise for driving energetic photoredox reactions.

RESUMO

A novel series of complexes of the formula [Ru(4,4'-X2-bpy)2(Mebpy-CN)](PF6)2 (X = -CH3, -OCH3, -N(CH3)2; Mebpy-CN = 4-methyl-2,2'-bipyridine-4'-carbonitrile) have been synthesized and characterized by spectroscopic, electrochemical, and photophysical techniques. Inclusion of the electron-withdrawing substituent -CN at one bpy ligand and different electron-donor groups -X at the 4,4'-positions of the other two bpy ligands produce a fine tuning of physicochemical properties. Redox potentials, electronic absorption maxima, and emission maxima correlate well with Hammett's σp parameters of X. Quantum mechanical calculations are consistent with experimental data. All the complexes can be anchored through the nitrile moiety of Mebpy-CN over ZnO nanowires in dye-sensitized solar cells that exhibit an improvement of light to electrical energy conversion efficiency as the electronic asymmetry increases in the series.

RESUMO

Nanocrystalline TiO2 and reduced graphene oxide (TiO2/RGO) composite films were prepared by combining a sol-gel method with hydrothermal treatment, employing titanium isopropoxide (Ti(O(i)Pr)4) and graphene oxide (GO) as starting materials. Although several reports in the literature have explored the benefits of RGO addition in titania films for photocatalysis and water splitting reactions, the role of RGO in the composite is always described as that of a material that is able to act as an electron acceptor and transport electrons more efficiently. However, in most of these reports, no clear evidence for this "role" is presented, and the main focus is deviated to the improved efficiency and not to the reasons for said efficiency. In this study, we employed several techniques to definitively present our understanding of the role of RGO in titania composite films. The TiO2/RGO composite films were characterized by X ray diffraction, Raman spectroscopy, microscopy and electrochemical techniques. In photoelectrochemical water splitting studies, the TiO2/RGO(0.1%) photoelectrodes showed the highest photocurrent density values (0.20 mA cm(-2) at 1.23 VRHE) compared to other electrodes, with an increase of 78% in relation to pristine TiO2 film (0.11 mA cm(-2) at 1.23 VRHE). The transient absorption spectroscopy (TAS) results indicated increases in the lifetime and yield of both the photogenerated holes and electrons. Interestingly, the TiO2/RGO(0.1%) film exhibited the best charge generation upon excitation, corroborating the photoelectrochemical data. We proposed that in films with lower concentrations (<0.1 wt%), the RGO sheets are electron acceptors, and a decrease in the charge recombination processes is the immediate consequence. Thus, both holes and electrons live longer and contribute more effectively to the photocurrent density.

RESUMO

TiO2 and TiO2/WO3 electrodes, irradiated by a solar simulator in configurations for heterogeneous photocatalysis (HP) and electrochemically-assisted HP (EHP), were used to remediate aqueous solutions containing 10 mg L(-1) (34 µmol L(-1)) of 17-α-ethinylestradiol (EE2), active component of most oral contraceptives. The photocatalysts consisted of 4.5 µm thick porous films of TiO2 and TiO2/WO3 (molar ratio W/Ti of 12%) deposited on transparent electrodes from aqueous suspensions of TiO2 particles and WO3 precursors, followed by thermal treatment at 450 (°)C. First, an energy diagram was organized with photoelectrochemical and UV-Vis absorption spectroscopy data and revealed that EE2 could be directly oxidized by the photogenerated holes at the semiconductor surfaces, considering the relative HOMO level for EE2 and the semiconductor valence band edges. Also, for the irradiated hybrid photocatalyst, electrons in TiO2 should be transferred to WO3 conduction band, while holes move toward TiO2 valence band, improving charge separation. The remediated EE2 solutions were analyzed by fluorescence, HPLC and total organic carbon measurements. As expected from the energy diagram, both photocatalysts promoted the EE2 oxidation in HP configuration; after 4 h, the EE2 concentration decayed to 6.2 mg L(-1) (35% of EE2 removal) with irradiated TiO2 while TiO2/WO3 electrode resulted in 45% EE2 removal. A higher performance was achieved in EHP systems, when a Pt wire was introduced as a counter-electrode and the photoelectrodes were biased at +0.7 V; then, the EE2 removal corresponded to 48 and 54% for the TiO2 and TiO2/WO3, respectively. The hybrid TiO2/WO3, when compared to TiO2 electrode, exhibited enhanced sunlight harvesting and improved separation of photogenerated charge carriers, resulting in higher performance for removing this contaminant of emerging concern from aqueous solution.

Assuntos

RESUMO

Iron-doped TiO(2) (Fe:TiO(2)) nanoparticles were synthesized by the sol-gel method (with Fe/Ti molar ratio corresponding to 1, 3, and 5%), followed by hydrothermal treatment, drying, and annealing. A similar methodology was used to synthesize TiO(2) and α-Fe(2)O(3) nanoparticles. For comparison, a mixture hematite/titania, with Fe/Ti = 4% was also investigated. Characterization of the samples using Rietveld refinement of X-ray diffraction data revealed that TiO(2) consisted of 82% anatase and 18% brookite; for Fe:TiO(2), brookite increased to 30% and hematite was also identified (0.5, 1.0, and 1.2 wt % for samples prepared with 1, 3, and 5% of Fe/Ti). For hematite/titania mixture, Fe/Ti was estimated as 4.4%, indicating the Rietveld method reliability for estimation of phase composition. Because the band gap energy, estimated as 3.2 eV for TiO(2), gradually ranged from 3.0 to 2.7 eV with increasing Fe content at Fe:TiO(2), it can be assumed that a Fe fraction was also inserted as dopant in the TiO(2) lattice. Extended X-ray absorption fine structure spectra obtained for the Ti K-edge and Fe K-edge indicated that absorbing Fe occupied a Ti site in the TiO(2) lattice, but hematite features were not observed. Hematite particles also could not be identified in the images obtained by transmission electron microscopy, in spite of iron identification by elemental mapping, suggesting that hematite can be segregated at the grain boundaries of Fe:TiO(2).

Assuntos

Assuntos

Assuntos

RESUMO

Os Agentes Comunitários de Saúde (ACS) têm sido considerados atores-chave na implantação de políticas, dentro da Estratégia Saúde da Família (ESF), voltadas para a atenção à saúde. Entre suas principais funções, destaca-se o preenchimento das fichas de produção mensal, sendo que uma delas é a FICHA D, que tem por objetivo acompanhar as famílias cadastradas em sua área e anotar os eventos específicos, tais como: dados do recém-nascido, crianças, gestantes, hipertensão arterial, diabetes, tuberculose,hanseníase, hospitalizações e óbitos(AU)

Assuntos

RESUMO

Este Iniciativa apresenta o Processo de Trabalho da Preceptoria Médica na Estratégia de Saúde da Família/Atenção Básica da Coordenadoria Regional de Saúde Sul(AU)

Assuntos

RESUMO

Os Agentes Comunitários de Saúde (ACS) têm sido considerados atores-chave na implantação de políticas, dentro da Estratégia Saúde da Família (ESF), voltadas para a atenção à saúde. Entre suas principais funções, destaca-se o preenchimento das fichas de produção mensal, sendo que uma delas é a FICHA D, que tem por objetivo acompanhar as famílias cadastradas em sua área e anotar os eventos específicos, tais como: dados do recém-nascido, crianças, gestantes, hipertensão arterial, diabetes, tuberculose,hanseníase, hospitalizações e óbitos

Assuntos

RESUMO

Este Iniciativa apresenta o Processo de Trabalho da Preceptoria Médica na Estratégia de Saúde da Família/Atenção Básica da Coordenadoria Regional de Saúde Sul

Assuntos