RESUMO

Objective: The present study aimed to evaluate the quality of life in TMD patients with the use of Stabilization Splints (SSs) and Home Therapeutic Exercises (HTEs) guidance. Material and Methods: The study was a clinical, randomized, controlled, prospective, and interventional trial. The screening included dentate patients of both genders, diagnosed with TMD through the RDC/TMD questionnaire with no TMJ osteoarthritis and/or osteoarthrosis. To assess the quality of life, the Short-Form Health Survey (SF-36) questionnaire was applied to all patients (n=70), randomized into a test group with SS and a control group with HTE. The evaluations of both questionnaires were performed before and after the intervention of 12 weeks. Results: The comparisons between pre- and post-intervention intragroups were performed by the non-parametric Wilcoxon test with a 5% significance level. There was a frequency distribution of the responses to the 36 items of the SF-36 questionnaire and comparisons between times. In the test group, 49 patients received a SS and did HTEs. In the control group, 21 patients performed HTEs. In the statistical analysis, among the eight domains, three were identified with significant scores: pain, mental health, and vitality. Conclusion: It was found that there was an improvement in pain and quality of life after the treatment of TMD with a SS and HTE (AU)

Objetivo: O presente estudo teve como objetivo avaliar a qualidade de vida em pacientes com DTM com o uso de placas de estabilização (SSs) e orientação de exercícios terapêuticos domiciliares (HTEs). Material e Métodos: O estudo foi um ensaio clínico, randomizado, controlado, prospectivo e intervencionista. A triagem incluiu pacientes dentados de ambos os sexos, diagnosticados com DTM através do questionário RDC/TMD sem osteoartrite e/ou osteoartrose da ATM. Para avaliar a qualidade de vida, o questionário Short-Form Health Survey (SF-36) foi aplicado a todos os pacientes (n=70), randomizados em grupo teste com SS e grupo controle com HTE. As avaliações de ambos os questionários foram realizadas antes e após a intervenção de 12 semanas. Resultados:As comparações intragrupos pré e pós-intervenção foram realizadas pelo teste não paramétrico de Wilcoxon com nível de significância de 5%. Houve distribuição de frequência das respostas aos 36 itens do questionário SF-36 e comparações entre os tempos. No grupo controle, 21 pacientes realizaram HTEs. Na análise estatística, dentre os oito domínios, três foram identificados com escores significativos: dor, saúde mental e vitalidade. Conclusão: Verificou-se que houve melhora da dor e da qualidade de vida após o tratamento da DTM com SS e HTE.(AU)

Assuntos

RESUMO

INTRODUCTION: Orthodontic retraction of the anterior teeth is indicated when the patient has a malocclusion with protrusion of the incisors. Several mechanics are indicated to perform this retraction. OBJECTIVE: The objective of this study was to compare the strains generated by four different types of retraction mechanics along the roots of the anterior teeth. METHODS: A photoelastic model simulating an arch with first premolars extraction was made. Sixty retraction archwires were prepared, including fifteen for each type of mechanics evaluated: sliding, teardrop loop spring, T-loop spring and double key loop archwire. The strains were observed in two perspectives: occlusal and oblique. In the occlusal perspective, strains were compared among the six anterior teeth. From the oblique perspective, strains were compared among the thirds of the left canine root. RESULTS: In the occlusal perspective, the teardrop loop spring mechanics presented greater strains, followed by T-loop spring, double key loop archwire and sliding mechanics. In all mechanics, strains were more concentrated in the canines than in the incisors. From the oblique perspective, the teardrop loop mechanics generated greater strains in the cervical regions of the canine, and in the apical regions, no differences were found in strains among the four types of mechanics. In the same mechanics, greater strains were present in the cervical zones. CONCLUSION: The teardrop loop spring retraction mechanic presented the greatest mean strain, and the sliding retraction mechanic presented the lowest mean strain on the root of anteroinferior teeth in the occlusal and oblique perspectives.

Assuntos

RESUMO

The technique describes the development and production of photoelastic models used in dentistry, which simulate structures subject to the action of forces. It proposes to standardize, with more accuracy, the assessment of stresses generated by the stomatognathic system when dental arches are rehabilitated using implants and prosthetic devices. The technique details the insertion of digital flow and new mechanical devices, such as vacuum mixers and bubble-eliminating pan, in addition to describing the necessary precautions to avoid frequent problems in its creation, obtaining more reliable results when using the photoelastic method

técnica descreve o desenvolvimento e a produção de modelos fotoelásticos empregados em odontologia, que simulam estruturas sujeitas à ação de forças. Propõe padronizar, com mais acertividade, a avaliação das tensões geradas pelo sistema estomatognático quando os arcos dentários são reabilitados utilizando implantes e dispositivos protéticos. A técnica detalha a inserção do fluxo digital e novos dispositivos mecânicos, como misturadores a vácuo e panela eliminadora de bolha, além de descrever os cuidados necessários para evitar problemas frequentes na sua criação, obtendo resultados mais confiáveis na utilização do método fotoelástico

RESUMO

The bone quality allows identifying some diseases, more appropriate treatments, besides serving to determine the patient s age. The objective is to identify studies that analyzed bone quality using panoramic dental radiographs to determine diagnoses and promote. A bibliographic search of the five years was carried out, published in dentistry journals, which used and discussed the applicability of panoramic radiographs in the evaluation bone quality. The initial search resulted in 183, totaling 12 eligible articles. Panoramic dental radiographs are important exams for the evaluation of bone quality, changing as an accessible alternative and with less exposure to radiation, promoting an interaction between professionals and the creation of new clinical criteria

A qualidade óssea permite identificar previamente algumas doenças, propõe tratamentos mais adequados, além de servir para determinar a idade do paciente. O objetiov é identificar estudos que analisaram a qualidade óssea por meio de radiografias panorâmicas odontológicas para determinar diagnósticos e promover tratamentos. Foi realizada uma pesquisa bibliográfica dos últimos cinco anos, publicados em periódicos de odontologia, que utilizaram e discutiram a aplicabilidade de radiografias panorâmicas na avaliação da qualidade óssea. A busca inicial resultou em 183 estudos, totalizando 12 artigos elegíveis. As radiografias panorâmicas odontológicas são exames importantes para a avaliação da qualidade óssea, se apresentando como alternativa acessível e com menor exposição à radiação, promovem a interação dos profissionais e a criação de novos protocolos clínicos

RESUMO

ABSTRACT Introduction: Orthodontic retraction of the anterior teeth is indicated when the patient has a malocclusion with protrusion of the incisors. Several mechanics are indicated to perform this retraction. Objective: The objective of this study was to compare the strains generated by four different types of retraction mechanics along the roots of the anterior teeth. Methods: A photoelastic model simulating an arch with first premolars extraction was made. Sixty retraction archwires were prepared, including fifteen for each type of mechanics evaluated: sliding, teardrop loop spring, T-loop spring and double key loop archwire. The strains were observed in two perspectives: occlusal and oblique. In the occlusal perspective, strains were compared among the six anterior teeth. From the oblique perspective, strains were compared among the thirds of the left canine root. Results: In the occlusal perspective, the teardrop loop spring mechanics presented greater strains, followed by T-loop spring, double key loop archwire and sliding mechanics. In all mechanics, strains were more concentrated in the canines than in the incisors. From the oblique perspective, the teardrop loop mechanics generated greater strains in the cervical regions of the canine, and in the apical regions, no differences were found in strains among the four types of mechanics. In the same mechanics, greater strains were present in the cervical zones. Conclusion: The teardrop loop spring retraction mechanic presented the greatest mean strain, and the sliding retraction mechanic presented the lowest mean strain on the root of anteroinferior teeth in the occlusal and oblique perspectives.

RESUMO Introdução: A retração ortodôntica dos dentes anteriores é indicada quando o paciente apresenta má oclusão com vestibularização dos incisivos. Diferentes mecânicas são indicadas para realizar essa retração. Objetivo: O objetivo do presente estudo foi comparar as tensões geradas por quatro diferentes tipos de mecânicas de retração nas raízes dos dentes anteriores. Métodos: Um modelo fotoelástico foi confeccionado simulando uma arcada com os primeiros pré-molares extraídos. Foram preparados 60 arcos de retração, sendo quinze para cada tipo de mecânica avaliada: deslizamento, alça de Bull, alça em T e arco de dupla chave. As tensões foram observadas em duas perspectivas: oclusal e oblíqua. Na vista oclusal, as tensões foram comparadas entre os seis dentes anteriores. Na vista oblíqua, as tensões foram comparadas entre os terços radiculares do canino esquerdo. Resultados: Na vista oclusal, a mecânica com alça de Bull apresentou maiores tensões, seguida da alça em T, arco de dupla chave e mecânica de deslizamento. Em todas as mecânicas, as tensões se concentraram mais nos caninos do que nos incisivos. Na vista oblíqua, a mecânica com alça de Bull gerou maiores tensões nas regiões cervicais dos caninos; nas regiões apicais, não houve diferenças nas tensões entre os quatro tipos de mecânicas. Dentro de uma mesma mecânica, as maiores tensões estiveram presentes nas regiões cervicais. Conclusão: A mecânica de retração com alça de Bull apresentou a maior média de tensões, e a mecânica de retração por deslizamento apresentou a menor média de tensões na raiz dos dentes anteroinferiores, nas vistas oclusal e oblíqua.

Assuntos

RESUMO

OBJECTIVE: To assess whether digital workflow gives better results than the conventional one in the single implant crowns, when analyzing the impression time, patient preference, time efficiency, and adjustment time. MATERIAL AND METHODS: MEDLINE, Embase, and Cochrane were searched and supplemented via hand search up to June 19, 2019. Only clinical trials assessing conventional versus digital workflows for single implant crowns were included. Impression time was evaluated using random effects meta-analysis, while patient preference, adjustment time, and time efficiency were reported descriptively. RESULTS: Among 1,334 publications identified, ten studies were included. The random effects models revealed statistically significant reduction in time in the digital impression group when compared to the conventional group by the mean meta-analysis (MD: 8.22 [95% CI: 5.48, 10.96]). Analysis from immediate digital impression versus conventional (MD: 3.84 [95% CI: 3.30, 4.39]) and regular digital impression versus conventional (MD:10.67 [95% CI: 5.70, 15.65]) showed statistically significant reduction in time on using the digital impression. Impression time in the digital process ranged between 6 min 39 s and 20 min, whereas for conventional, it was between 11.7 and 28.47 min. Patients showed greater preference for digital impression. Adjustment time in the digital process ranged between 1.96 and 14 min, whereas for conventional, it was between 3.02 and 12 min. Time efficiency in the digital process ranged between 36.8 and 185.4 min, whereas for conventional, it was between 55.6 and 332 min. CONCLUSION: The digital workflow has demonstrated better clinical efficiency considering impression time, patient preference, and time efficiency. According to the adjustment time, different results were presented.

Assuntos

RESUMO

OBJECTIVES: The aim of this research was to develop a sensor of approximation by reflectance for guided surgery with dental implants without flap detachment, and verify the effectiveness of this system. MATERIALS AND METHODS: Ten models of total edentulous arches were divided into two groups. Two implants of 3.5 × 11.5 mm (NeoDent) were inserted in each model; in Group 1 (G1), a stereolithographic guide NeoGuide system was used. In Group 2 (G2), the experimental approximation sensor was used for the insertion of the implants. The evaluation of the results was performed by overlapping the virtual planning images with the tomographies of the models of the implants inserted. RESULTS: There were no statistically significant differences between the guide and the sensor groups. The averages and standard deviations observed at the angulation of the guide was 4.15 (2.65 degrees) and 5.48 (2.85 degrees) at the sensor. The linear deviations at the cervical level were 0.002 (1.37) and 0.11 (1.47) mm and at the apical level 0.19 (1.28) and 0.21 (1.42) mm, respectively. CONCLUSIONS: The use of a guide is important for the stabilization of the drills; the greatest challenge is to control the apical position of the implants, especially in highly reabsorbed edges. The experimental sensor can become an auxiliary tool to the stereolithographic guides; however, several difficulties must still be overcome to recommend the use of a sensor.

RESUMO

The aim of the present study was to perform a software-assisted radiographic assessment of the effect of platform-switching on marginal bone loss (MBL) around dental implants. Forty patients requiring a dental implant in non-grafted partially edentulous mandibles were enrolled and categorized into implants receiving a platform-matched abutment (control group) or implants with a platform-switched abutment (test group). Standardized digital periapical radiographs were taken at the time of implant placement (T0), at implant loading (T1) and 1-year after functional loading (T2). Software-assisted radiographic assessment of the MBL horizontal, vertical and area changes was performed and compared between time intervals (T1-T0, T2-T1 and T2-T0). Mean radiographic horizontal MBL (hMBL) and vertical MBL (vMBL) from implant placement to 1-year after implant loading (T2-T0) were significantly increased around platform-matched when compared to platform-switched abutments (1.04 mm vs 0.84 mm, p<0.05) and (0.99 mm vs 0.82 mm, p<0.05), respectively. Additionally, bone loss area (BLa) was greater (0.77 mm2 vs 0.63 mm2; p<0.05) for platform-matched compared to platform-switched abutments. Platform-switching has a positive impact upon the amount of bone modeling after loading implants with internal hexagon connection.

Assuntos

RESUMO

Abstract The aim of the present study was to perform a software-assisted radiographic assessment of the effect of platform-switching on marginal bone loss (MBL) around dental implants. Forty patients requiring a dental implant in non-grafted partially edentulous mandibles were enrolled and categorized into implants receiving a platform-matched abutment (control group) or implants with a platform-switched abutment (test group). Standardized digital periapical radiographs were taken at the time of implant placement (T0), at implant loading (T1) and 1-year after functional loading (T2). Software-assisted radiographic assessment of the MBL horizontal, vertical and area changes was performed and compared between time intervals (T1-T0, T2-T1 and T2-T0). Mean radiographic horizontal MBL (hMBL) and vertical MBL (vMBL) from implant placement to 1-year after implant loading (T2-T0) were significantly increased around platform-matched when compared to platform-switched abutments (1.04 mm vs 0.84 mm, p<0.05) and (0.99 mm vs 0.82 mm, p<0.05), respectively. Additionally, bone loss area (BLa) was greater (0.77 mm2 vs 0.63 mm2; p<0.05) for platform-matched compared to platform-switched abutments. Platform-switching has a positive impact upon the amount of bone modeling after loading implants with internal hexagon connection.

Resumo O objetivo do presente estudo foi realizar uma avaliação radiográfica assistida por computador do efeito da plataforma reduzida sobre a perda óssea marginal (MBL) ao redor de implantes. Quarenta pacientes que necessitavam um implante em mandíbulas parcialmente edêntulas não enxertadas foram selecionados e divididos em implantes que receberam pilares de plataforma igualada (grupo controle) ou implantes com pilares de plataforma reduzida (grupo teste). Radiografias periapicais digitais padronizadas foram realizadas no momento da instalação do implante (T0), carregamento do implante (T1) e 1 ano após carregamento funcional (T2). Avaliação radiográfica assistida por computador da MBL horizontal, vertical e mudanças de área foi realizada e comparada entre os intervalos de tempo (T1-T0, T2-T1 e T2-T0). A média radiográfica da MBL horizontal (hMBL) e da MBL vertical (vMBL) do momento da instalação do implante até 1 ano após carregamento (T2-T0) foram significativamente aumentadas ao redor dos pilares de plataforma igualada quando comparado com os pilares de plataforma reduzida (1,04 mm vs 0,84 mm, p<0,05) e (0,99 mm vs 0,82,mm, p<0,05), respectivamente. Além disso, a área de perda óssea (BLa) foi maior (0,77 mm2 vs 0,63 mm2; p<0,05) para plataforma igualada comparada com pilares de plataforma reduzida. Plataforma reduzida tem um impacto positivo na remodelação óssea após carregamento de implantes com conexão interna hexagonal.

Assuntos

RESUMO

OBJECTIVE: The aim of this review was to update the literature with regard to the digital methods available by CEREC Chairside system to register and design the occlusion, to report their efficacy and technical innovations in the field of Restorative Dentistry. A search strategy was performed using the key-words: "virtual articulator," or "CAD-CAM and occlusal recording," or "CAD-CAM and occlusion register," or "CAD-CAM and occlusal contacts," or "CAD-CAM and prosthesis." MATERIAL AND METHODS: Inclusion criteria comprised studies evaluating the use of digital methods available by CEREC System for occlusal registration and design during prosthodontics treatment. PubMed and Cochrane library and reference lists were searched up to January 2016. RESULTS: The search resulted in 280 articles after removing duplicates. Subsequently, 233 records were excluded and 49 studies were selected for reading in full. Eleven articles were considered eligible for the systematic review (4 in vitro and 7 clinical studies). CONCLUSION: Scientific evidence suggests that digital methods were accurate to register and design the occlusion of dental prostheses. Nevertheless, further clinical studies are required to establish a conclusion with regard to its accuracy in prosthodontics treatment. CLINICAL SIGNIFICANCE: Digital technologies allow the design of occlusal surfaces of CAD-CAM fabricated prostheses using innovative approaches. This systematic review aimed to update the literature to help dentists determine the most appropriate digital method to register and design the occlusal surface of CAD-CAM crowns. (J Esthet Restor Dent 28:208-220, 2016).

Assuntos

RESUMO

The process of tooth loss throughout life associated with severe occlusal wear may pose a challenge in the rehabilitation of partially edentulous arches. In these cases, many therapeutic procedures are necessary because each tooth must be restored to obtain the correct anatomical contour and recover the occlusal vertical dimension (OVD). A removable partial denture (RPD) with occlusal/incisal coverage, also known as an overlay RPD, is an alternative treatment option with fewer interventions, and, consequently, lower cost. This clinical report reviews the principles involved in the clinical indication for an overlay RPD, as well as the necessary planning and execution, to discuss the feasibility and clinical effectiveness of this treatment, identifying the indications, advantages, and disadvantages of this procedure through the presentation of a clinical case. The overlay RPD can be an alternative treatment for special situations involving partially edentulous arches in patients who need reestablishment of the OVD and/or realignment of the occlusal plane, and it can be used as a temporary or definitive treatment. The main advantages of this type of treatment are its simplicity, reversibility, and relatively low cost; however, further studies are needed to ensure the efficacy of this treatment option.

Assuntos

RESUMO

INTRODUCTION: The progressive bone loss at the neck of dental implant is a clinical concern since it affects the maintenance of dental aesthetics. The current study evaluated the influence of insertion depth, prosthetic connection, and type of loading on the stress distribution around dental implants, using photoelastic evaluation. MATERIALS AND METHODS: A total of three blocks of photoelastic resin for each type of implant connection (external hexagon, external hexagon flattened, internal hexagon, and Morse taper) were built. Each block differed in the position of the implant platform in relative to the upper margin of the block: I (2 mm below), II (at the same level), and III (2 mm above). A force of 100 N was applied to both straight and tilted abutments. Totally, 4 selected points were evaluated at 1 side of the implant. Quantitative data were collected for the statistical analysis. RESULTS: A multiple linear regression showed the relation between the stress distribution and the insertion depth. For all the implant types, both with straight and tilted abutments, group I presented the lowest stress concentration around the fixture when compared with group II and III (P < 0.05). CONCLUSIONS: Within the limitations of this study, it could be concluded that the deeper the insertion, the lower the stress concentration.

Assuntos

RESUMO

The aim of study was to assess the stress around 10/13/15-mm implants in the mandibular area with a 15-mm cantilevered acrylic-resin-coated prostheses following the application force, using the photoelasticity method. Three photoelastic mandibular models were created containing 10-, 13-, and 15-mm implants in length and 3.75 mm in diameter. The implants had bore internal hex connections and were placed parallel to the intermental region. Abutments with 1-mm high cuffs were placed over the implants, and a single cobalt/chrome metallic prosthesis with a 15-mm cantilever, coated with thermoplastic acrylic resin, was placed on top. Loads of 1.0 and 3.0 bars were applied, and the images were photographed and assessed by photoelasticity method. The greatest stress levels were observed for the 10-mm implants. The stress pattern was the same regardless of implant length; only the magnitude of the stress along the implant body revealed changes. Increased implant length played a role in reducing stress on the investigated area of the model, and the 15-mm implants exhibited the best performance in regard to stress distribution. The highest stress levels were found in the implants closest to the cantilever and the central implant. The longest implants were more favorable in regard to the stress distribution on the peri-implant support structures in the 15-mm cantilevered prosthesis under loads.

Assuntos

RESUMO

A verticalização de molares inferiores é indicada quando ocorre inclinação mesial dos segundos molares atribuída à ausência do primeiro molar. Existem inúmeras metodologias para realização de tal movimento. O objetivo do estudo foi analisar e comparar in vitro, por meio de fotoelasticidade a distribuição de tensões nos segundos molares inferiores geradas por diferentes métodos de verticalização com aplicação de diferentes cargas. Foi avaliado um modelo confeccionado em resina flexível com a mecânica de cantiléver. Foram utilizadas forças de 50 gf, 100 gf, 150 gf, 200 gf, 250 gf e 300 gf. As regiões do segundo molar selecionadas para avaliação foram: mesial da raiz cervical, apical da raiz mesial, cervical da raiz distal e apical da raiz distal. A resultante das forças aplicadas foi aferida por meio da quantificação das franjas isocromáticas. Os valores de franjas foram descritos com uso de média e desvio padrão e verificada a concordância/reprodutibilidade entre as avaliações com uso do coeficiente de correlação intraclasse com os respectivos intervalos com 95% de confiança e calculadas as medidas de repetibilidade. Utilizando-se o cantiléver, as maiores tensões localizaram-se na região cervical mesial, seguidas de apical da raiz mesial e região cervical distal. Não foram detectadas tensões na apical da raiz distal. A aplicação de forças acima de 100 gf apresentou grandes áreas de tensões nas regiões cervical e apical da raiz mesial.

Lower molars uprighting is indicated when mesial inclination of second molars occurs due to lack of first molars. There are many methodologies to perform such movement. The aim of this study was to analyze and compare in vitro, by means of photoelasticity, the stress distribution in lower second molars generated by different uprighting methods, with application of diferrent loads. It was assessed one model manufactured with flexible resin with cantilever mechanics. The loads used were 50gf, 100gf, 150gf, 200gf, 250gf, 300gf. The second molar areas selected for the assessment were the mesial of the cervical root, apical of the mesial root, cervical of the distal root and apical of the distal root. The resultant of forces applied was measured by quantifying isochromatic fringes. The fringe values were described using the mean and the standard deviation values and the agreement/reproducibility among the assessments were verified applying the intraclass correlation coefficient in the respective intervals with 95% confidence. Repeatability measures were calculated. Using cantilever, the highest strains were found in the mesial-cervical area, followed by the apical area of the mesial root and the distal-cervical area. In the apical area of the distal root strain was not found. The application of forces above 100gf showed large areas of tension in the cervical and apical regions of the mesial root.

Assuntos

RESUMO

Serão apresentados dois casos clínicos envolvendo coroas fixas unitárias nos elementos 11 e 21 e prótese total fixa sobre implante maxilar. O primeiro caso, de coroas unitárias fixas, em 11 e 21, descreve a instalação de implantes imediatamente após a exodontia dentária, seguida da estética imediata, por meio da provisionalização dos implantes. O principal objetivo da descrição desse caso foi demonstrar a importância da técnica, já que essa permite manutenção do arcabouço dos tecidos periodontais, ósseo e gengival. Esse fator é de extrema importância para alcançarmos o resultado final desejado. Já o segundo caso, de sorriso gengival, relata a descrição da reabilitação de arco superior por meio de prótese total fixa, utilizando para isso o planejamento reverso com auxílio de software computacional. Assim, foi realizada uma osteotomia maxilar seguida da instalação imediata dos implantes. Aguardou-se o segundo estágio cirúrgico, para osseointegração dos implantes, para em seguida reabilitá-los com a prótese total fixa do tipo protocolo de Brånemark. A descrição desse caso objetivou mostrar a importância de prever, por meio do planejamento reverso, o possível tamanho, diâmetro, posição tridimensional do implante, tamanho da coroa protética, ou análise do espaço para a reabilitação protética, minimizando, assim, possíveis erros e prejuízos no resultado final estético da reabilitação.

Assuntos

RESUMO

O presente artigo descreve a reabilitação de arco superior por meio de prótese total fixada a implantes em um caso clínico de sorriso gengival associado a perdas dentárias. Para a obtenção de um resultado previsível, estética e funcionalmente, foi realizado extenso planejamento protético pré-cirúrgico em modelos e simulações digitais do sorriso. Baseado nesse planejamento foi realizada uma osteotomia maxilar com instalação imediata dos implantes. Aguardou-se o tempo de osseointegração dos implantes, para em seguida reabilitá-Ios com a prótese total fixa metaloplástica parafusada. A descrição desse caso objetiva ressaltar a importância do planejamento protético pré-cirúrgico minimizando assim, possíveis erros e prejuízos no resultado final estético e funcional da reabilitação.

The present study describes the rehabilitation of the upper arch with fixed full arch prosthesis screw retained to implants in a gummy smile case report. In order to obtain predictable results, esthetically and functionally, an extensive pre-surgical prosthetic planning and smile digital simulations were done. Based on this planning a maxillary osteotomy was done and immediate implants were installed. After the osseointegration period, the patient received a full fixed metaloplastic prosthesis, screw retained. This case report aims to highlight the importance of pre-surgical prosthetic planning to minimize errors and to achieve esthetic and functional results.

Assuntos

RESUMO

The aim of this in vitro study was to evaluate, using the photoelastic analysis method, the stress distribution in mandibular bone surrounding a bar-clip overdenture when 2 implant angulations were simulated. Two mandibular photoelastic models were manufactured, with 2 implants embedded in the interforaminal region: model 1-PAPI, a photoelastic analysis model with parallel implants; and model 2-PAAI, a photoelastic analysis model with angled implants. A bar-clip retention system and an overdenture were positioned over the implants, and loads of 1.0, 2.0 and 3.0 bars were applied. The resultant stresses that developed in the supporting structure were photoelastically monitored and were recorded photographically. The results showed that there were no similarities in the areas of stress among the photoelastic resin models when the angulation of the implants was evaluated. Model 1-PAPI presented a higher stress concentration at the implant apex, while in model 2-PAAI, there were higher stress concentrations on the mesial and distal implant faces. Within the limitations of this study, it was concluded that the PAPI photoelastic model demonstrated better stress transfer compared to the PAAI model, since the forces oriented along the axis were better absorbed by the bone.

Assuntos

RESUMO

Complete dentures acts as a reservoir for microbial colonization, which may lead to systemic infections. Microwave irradiation has been used as an efficient method of denture disinfection. Even though current methods eliminate denture-base microorganisms, a recurrence rate of denture stomatitis (DS) is still observed among denture-wearing patients. It was hypothesized that microwave disinfection kills microorganisms but do not remove dead bacteria from the denture surface. To test this hypothesis, the biofilm found in the dentures of 10 patients with DS was evaluated. In addition, the effects of microwave irradiation plus brushing (MW+B) on the denture biofilm and the combination of denture cleanser with microwave irradiation and brushing (MW+DC+B) for the removal of denture-accumulating microorganisms were investigated. Microbiological data were analyzed statistically by nonparametric analysis (Friedman/Wilcoxon, α=0.05). MW+B and MW+DC+B were effective in reducing the rate of microorganisms (99.2% and 99.5% respectively), but without significant difference between them (p=0.553). However, it was observed that the complete removal of microorganisms from denture surface was only possible when all regimens were combined (MW+DC+B). Microwave irradiation in combination with soaking in denture cleanser and brushing effectively disinfected the dentures and removed denture biofilm.

Assuntos

RESUMO

The aim of this study was to evaluate whether the introduction of a device, resulting from the combination of an o'ring attachment with an orthodontic implant (o'ring ortho implant, O'ROI), to affix the surgical template of CAD/CAM-guided implant surgery contribute to minimizing the deviations in the position and inclination of implants at the time of their placement. Ten models simulating bone tissue were fabricated and randomly divided into 2 groups: 5 with the scanning and surgical template of the usual technique, representing the Control Group (C), and 5 with scanning and surgical templates fixed by o'ring ortho implants (O'ROI), representing the Test Group (T). Forty implants measuring 4×11 mm were placed in the groups, using the respective templates. The results were evaluated by the fusion of CT images of the planned and placed implants. The locations and axes were compared. There were no statistically significant differences for the angular (Tukey's test F = 1.06 and p = 0. 3124) and linear (ANOVA F = 2.54 and p = 0.11) deviations. However, the angular values of Group T showed a lower standard deviation in comparison with those of Group C. The use of o'ring ortho implants (O'ROI) is able to minimize the angular and linear deviation of implants at the time of their placement.

Assuntos

RESUMO

The aim of this study was to evaluate whether the introduction of a device, resulting from the combination of an o'ring attachment with an orthodontic implant (o'ring ortho implant, O'ROI), to affix the surgical template of CAD/CAM-guided implant surgery contribute to minimizing the deviations in the position and inclination of implants at the time of their placement. Ten models simulating bone tissue were fabricated and randomly divided into 2 groups: 5 with the scanning and surgical template of the usual technique, representing the Control Group (C), and 5 with scanning and surgical templates fixed by o'ring ortho implants (O'ROI), representing the Test Group (T). Forty implants measuring 4×11 mm were placed in the groups, using the respective templates. The results were evaluated by the fusion of CT images of the planned and placed implants. The locations and axes were compared. There were no statistically significant differences for the angular (Tukey's test F = 1.06 and p = 0. 3124) and linear (ANOVA F = 2.54 and p = 0.11) deviations. However, the angular values of Group T showed a lower standard deviation in comparison with those of Group C. The use of o'ring ortho implants (O'ROI) is able to minimize the angular and linear deviation of implants at the time of their placement.

O objetivo deste estudo foi avaliar se a introdução de um dispositivo resultante da combinação de um encaixe o'ring a um ortoimplante (o'ring ortho implant) nas guias da técnica de cirurgia guiada convencional, contribui para minimizar os desvios da posição e inclinação de implantes, no momento da sua colocação. Foram confeccionados 10 modelos simulando tecido ósseo, divididos aleatoriamente em 2 grupos: 5 com a guia tomográfica e cirúrgica da técnica usual, representando o grupo controle (C), e 5 com as guias fixadas a o'ring ortho implants, representando o grupo experimental (T). Quarenta implantes de 4 × 11 mm foram instalados nos grupos, usando as respectivas guias tomográficas e cirúrgicas. A avaliação dos resultados foi realizada pela sobreposição dos planejamentos virtuais, derivados de tomografias computadorizadas précirúrgicas, com as realizadas após a colocação dos implantes. Não houve diferenças estatisticamente significantes para os desvios angulares (Teste Tukey F = 1,06 e p = 0, 3124) e lineares (Teste ANOVA F = 2,54 e p = 0,11). No entanto, os valores angulares do grupo T mostraram menor desvio padrão em relação aos do grupo C. O uso de o'ring ortho implants pode minimizar as alterações de posicionamento dos implantes no momento da sua colocação, beneficiando a técnica da cirurgia virtual guiada usual.

Assuntos