RESUMO

The biological chemistry of hydrogen sulfide (H2S) with physiologically important heme proteins is in the focus of redox biology research. In this study, we investigated the interactions of lactoperoxidase (LPO) with H2S in the presence and absence of molecular dioxygen (O2) or hydrogen peroxide (H2O2). Under anaerobic conditions, native LPO forms no heme-H2S complex upon sulfide exposure. However, under aerobic conditions or in the presence of H2O2 the formation of both ferrous and ferric sulfheme (sulfLPO) derivatives was observed based on the appearances of their characteristic optical absorptions at 638 nm and 727 nm, respectively. Interestingly, we demonstrate that LPO can catalytically oxidize H2S by H2O2 via intermediate formation of relatively short-lived ferrous and ferric sulfLPO derivatives. Pilot product analyses suggested that the turnover process generates oxidized sulfide species, which include sulfate S O 4 2 - and inorganic polysulfides ( H S x - ; x = 2-5). These results indicated that H2S can serve as a non-classical LPO substrate by inducing a reversible sulfheme-like modification of the heme porphyrin ring during turnover. Furthermore, electron paramagnetic resonance data suggest that H2S can act as a scavenger of H2O2 in the presence of LPO without detectable formation of any carbon-centered protein radical species, suggesting that H2S might be capable of protecting the enzyme from radical-mediated damage. We propose possible mechanisms, which explain our results as well as contrasting observations with other heme proteins, where either no sulfheme formation was observed or the generation of sulfheme derivatives provided a dead end for enzyme functions.

RESUMO

Hemoglobin III (HbIII) is one of the two oxygen reactive hemoproteins present in the bivalve, Lucina pectinata. The clam inhabits a sulfur-rich environment and HbIII is the only hemoprotein present in the system which does not yet have a structure described elsewhere. It is known that HbIII exists as a heterodimer with hemoglobin II (HbII) to generate the stable Oxy(HbII-HbIII) complex but it remains unknown if HbIII can form a homodimeric species. Here, a new chromatographic methodology to separate OxyHbIII from the HbII-HbIII dimer has been developed, employing a fast performance liquid chromatography and ionic exchange chromatography column. The nature of OxyHbIII in solution at concentrations from 1.6 mg/mL to 20.4 mg/mL was studied using small angle X-ray scattering (SAXS). The results show that at all concentrations, the Oxy(HbIII-HbIII) dimer dominates in solution. However, as the concentration increases to nonphysiological values, 20.4 mg/mL, HbIII forms a 30% tetrameric fraction. Thus, there is a direct relationship between the Oxy(HbIII-HbIII) oligomeric form and hemoglobin concentration. We suggest it is likely that the OxyHbIII dimer contributes to active oxygen transport in tissues of L pectinata, where the Oxy(HbII-HbIII) complex is not present.

Assuntos

RESUMO

Myoglobin (Mb) binds oxygen with high affinity as a low spin singlet complex and thus functions as an oxygen storage protein. Yet, hybrid Density Functional Theory/Molecular Mechanical (DFT/MM) calculations of oxy-Mb models predict that the O2 bond is much less resistant to breaking in the presence of hydrogen sulfide (H2S) compared with water. Specifically, a hydrogen atom from H2S can be transferred to the distal oxygen atom through homolytic cleavage of the S-H bond to form the intermediate Compound (Cpd) 0 structure and a thiyl radical. In the presence of a neutral His64 (Nε protonation, His64-ε) and H2S, only a metastable Cpd 0 would be formed as the active site is devoid of any additional proton donor to fully break the O2 bond. In contrast, the calculations predict that the triplet state is significantly favored over the open shell singlet diradical state throughout the entire reaction coordinate in the presence of H2S and a positively charged His64. Furthermore, a positively charged His64 can readily donate a proton to Cpd 0 to fully break the O2 bond resulting in a configuration analogous to reported reaction models of a hemoglobin mutant bound to H2O2 with H2S present. Typically, exotic techniques are required to generate Cpd 0 but under the conditions just described the intermediate is readily detected in UV-Vis spectra at room temperature. The effect is observed as a 2 nm red shift of the Soret band from 414 nm to 416 nm (pH 5.0, His64-εδ) and from 416 nm to 418 nm (pH 6.6, His64-ε).

Assuntos

RESUMO

The recombinant polyhistidine-tagged hemoglobin I ((His)6-rHbI) from the bivalve Lucina pectinata is an ideal biocomponent for a hydrogen sulfide (H2S) biosensor due to its high affinity for H2S. In this work, we immobilized (His)6-rHbI over a surface modified with gold nanoparticles functionalized with 3-mercaptopropionic acid complexed with nickel ion. The attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) analysis of the modified-gold electrode displays amide I and amide II bands characteristic of a primarily α-helix structure verifying the presence of (His)6-rHbI on the electrode surface. Also, X-ray photoelectron spectroscopy (XPS) results show a new peak after protein interaction corresponding to nitrogen and a calculated overlayer thickness of 5.3 nm. The functionality of the immobilized hemoprotein was established by direct current potential amperometry, using H2S as the analyte, validating its activity after immobilization. The current response to H2S concentrations was monitored over time giving a linear relationship from 30 to 700 nM with a corresponding sensitivity of 3.22 × 10-3 nA/nM. These results confirm that the analyzed gold nanostructured platform provides an efficient and strong link for polyhistidine-tag protein immobilization over gold and glassy carbon surfaces for a future biosensors development.

Assuntos

RESUMO

Lucina pectinata is a clam that lives in sulfide-rich environments and houses intracellular sulfide-oxidizing endosymbionts. To identify new Lucina pectinata proteins, we produced libraries for genome and transcriptome sequencing and assembled them de novo. We searched for histone-like sequences using the Lucina pectinata histone H3 partial nucleotide sequence against our previously described genome assembly to obtain the complete coding region and identify H3 coding sequences from mollusk sequences in Genbank. Solen marginatus histone nucleotide sequences were used as query sequences using the genome and transcriptome assemblies to identify the Lucina pectinata H1, H2A, H2B and H4 genes and mRNAs and obtained the complete coding regions of the five histone genes by RT-PCR combined with automated Sanger DNA sequencing. The amino acid sequence conservation between the Lucina pectinata and Solen marginatus histones was: 77%, 93%, 83%, 96% and 97% for H1, H2A, H2B, H3 and H4, respectively. As expected, the H3 and H4 proteins were the most conserved and the H1 proteins were most similar to H1's from aquatic organisms like Crassostrea gigas, Aplysia californica, Mytilus trossulus and Biomphalaria glabrata. The Lucina pectinata draft genome and transcriptome assemblies, obtained by semiconductor sequencing, were adequate for identification of conserved proteins as evidenced by our results for the histone genes.

Assuntos

RESUMO

Since the 1863 discovery of a new green hemoglobin derivative called "sulfhemoglobin", the nature of the characteristic 618 nm absorption band has been the subject of several hypotheses. The experimental spectra are a function of the observation time and interplay between two major sulfheme isomer concentrations (a three- and five-membered ring adduct), with the latter being the dominant isomer at longer times. Thus, time-dependent density functional theory (TDDFT) was used to calculate the sulfheme excited states and visualize the highest occupied molecular orbitals (HOMOs) and lowest unoccupied MOs (LUMOs) of both isomers in order to interpret the transitions between them. These two isomers have distinguishable a1u and a2u HOMO energies. Formation of the three-membered ring SA isomeric structure decreases the energy of the HOMO a1u and a2u orbitals compared to the unmodified heme due to the electron-withdrawing, sulfur-containing, three-membered ring. Conversely, formation of the SC isomeric structure decreases the energy of the HOMO a1u and a2u orbitals due to the electron-withdrawing, sulfur-containing, five-membered ring. The calculations reveal that the absorption spectrum within the 700 nm region arises from a mixture of MOs but can be characterized as π to π* transitions, while the 600 nm region is characterized by π to dπ (d yz, d xz) transitions having components of a deoxy-like derivative.

Assuntos

RESUMO

The recombinant HbI was fused with a poly-Lys tag ((Lys)6-tagged rHbI) for specific-site covalent immobilization on two carbon nanotube transducer surfaces, i.e., powder and vertically aligned carbon nanotubes. The immobilization was achieved by following two steps: (1) generation of amine-reactive ester from the carboxylic acid groups of the surfaces and (2) coupling these groups with the amine groups of the Lys-tag. We analyzed the immobilization process using different conditions and techniques to differentiate protein covalent attachment from physical adsorption. Fourier transform infrared microspectroscopy data showed a 14 cm-1 displacement of the protein's amide I and amide II peaks to lower the frequency after immobilization. This result indicates a covalent attachment of the protein to the surface. Differences in the morphology of the carbon substrate with and without (Lys)6-tagged rHbI confirmed protein immobilization, as observed by transmission electron microscopy. The electrochemical studies, which were performed to evaluate the redox center of the immobilized protein, show a confinement suitable for an efficient electron transfer system. More importantly, the electrochemical studies allowed determination of a redox potential for the new (Lys)6-tagged rHbI. The data show that the protein is electrochemically active and retains its biological activity toward H2S.

RESUMO

Many heme-containing proteins with a histidine in the distal E7 (HisE7) position can form sulfheme in the presence of hydrogen sulfide (H2S) and a reactive oxygen species such as hydrogen peroxide. For reasons unknown, sulfheme derivatives are formed specifically on solvent-excluded heme pyrrole B. Sulfhemes severely decrease the oxygen-binding affinity in hemoglobin (Hb) and myoglobin (Mb). Here, use of hybrid quantum mechanical/molecular mechanical methods has permitted characterization of the entire process of sulfheme formation in the HisE7 mutant of hemoglobin I (HbI) from Lucina pectinata. This process includes a mechanism for H2S to enter the solvent-excluded active site through a hydrophobic channel to ultimately form a hydrogen bond with H2O2 bound to Fe(III). Proton transfer from H2O2 to His64 to form compound (Cpd) 0, followed by hydrogen transfer from H2S to the Fe(III)-H2O2 complex, results in homolytic cleavage of the O-O and S-H bonds to form a reactive thiyl radical (HS(•)), ferryl heme Cpd II, and a water molecule. Subsequently, the addition of HS(•) to Cpd II, followed by three proton transfer reactions, results in the formation of a three-membered ring ferric sulfheme that avoids migration of the radical to the protein matrix, in contrast to that in other peroxidative reactions. The transformation of this three-membered episulfide ring structure to the five-membered thiochlorin ring structure occurs through a significant potential energy barrier, although both structures are nearly isoenergetic. Both three- and five-membered ring structures reveal longer NB-Fe(III) bonds compared with other pyrrole nitrogen-Fe(III) bonds, which would lead to decreased oxygen binding. Overall, these results are in agreement with a wide range of experimental data and provide fertile ground for further investigations of sulfheme formation in other heme proteins and additional effects of H2S on cell signaling and reactivity.

Assuntos

RESUMO

Traditionally known as a toxic gas, hydrogen sulfide (H2S) is now recognized as an important biological molecule involved in numerous physiological functions. Like nitric oxide (NO) and carbon monoxide (CO), H2S is produced endogenously in tissues and cells and can modulate biological processes by acting on target proteins. For example, interaction of H2S with the oxygenated form of human hemoglobin and myoglobin produces a sulfheme protein complex that has been implicated in H2S degradation. The presence of this sulfheme derivative has also been used as a marker for endogenous H2S synthesis and metabolism. Remarkably, human catalases and peroxidases also generate this sulfheme product. In this review, we describe the structural and functional aspects of the sulfheme derivative in these proteins and postulate a generalized mechanism for sulfheme protein formation. We also evaluate the possible physiological function of this complex and highlight the issues that remain to be assessed to determine the role of sulfheme proteins in H2S metabolism, detection and physiology.

Assuntos

RESUMO

Hemoglobin HbI from the clam Lucina pectinata is involved in H2S transport, whereas homologous heme protein HbII/III is involved in O2 metabolism. Despite similar tertiary structures, HbI and HbII/III exhibit very different reactivity toward heme ligands H2S, O2, and NO. To investigate this reactivity at the heme level, we measured the dynamics of ligand interaction by time-resolved absorption spectroscopy in the picosecond to nanosecond time range. We demonstrated that H2S can be photodissociated from both ferric and ferrous HbI. H2S geminately rebinds to ferric and ferrous out-of-plane iron with time constants (τgem) of 12 and 165 ps, respectively, with very different proportions of photodissociated H2S exiting the protein (24% in ferric and 80% in ferrous HbI). The Gln(E7)His mutation considerably changes H2S dynamics in ferric HbI, indicating the role of Gln(E7) in controling H2S reactivity. In ferric HbI, the rate of diffusion of H2S from the solvent into the heme pocket (kentry) is 0.30 µM(-1) s(-1). For the HbII/III-O2 complex, we observed mainly a six-coordinate vibrationally excited heme-O2 complex with O2 still bound to the iron. This explains the low yield of O2 photodissociation and low koff from HbII/III, compared with those of HbI and Mb. Both isoforms behave very differently with regard to NO and O2 dynamics. Whereas the amplitude of geminate rebinding of O2 to HbI (38.5%) is similar to that of myoglobin (34.5%) in spite of different distal heme sites, it appears to be much larger for HbII/III (77%). The distal Tyr(B10) side chain present in HbII/III increases the energy barrier for ligand escape and participates in the stabilization of bound O2 and NO.

Assuntos

RESUMO

Propionates, as peripheral groups of the heme active center in hemeproteins have been described to contribute in the modulation of heme reactivity and ligand selection. These electronic characteristics prompted the question of whether the presence of hydrogen bonding networks between propionates and distal amino acids present in the heme ligand moiety can modulate physiological relevant events, like ligand binding association and dissociation activities. Here, the role of these networks was evaluated by NMR spectroscopy using the hemoglobin I PheB10Tyr mutant from Lucina pectinata as model for TyrB10 and GlnE7 hemeproteins. (1)H-NMR results for the rHbICN PheB10Tyr derivative showed chemical shifts of TyrB10 OHη at 31.00ppm, GlnE7N(ε1)H/N(ε2)H at 10.66ppm/-3.27ppm, and PheE11 C(δ)H at 11.75ppm, indicating the presence of a crowded, collapsed, and constrained distal pocket. Strong dipolar contacts and inter-residues crosspeaks between GlnE7/6-propionate group, GlnE7/TyrB10 and TyrB10/CN suggest that this hydrogen bonding network loop between GlnE7, TyrB10, 6-propionate group, and the heme ligand contribute significantly to the modulation of the heme iron electron density as well as the ligand stabilization mechanism. Therefore, the network loop presented here support the fact that the electron withdrawing character of the hydrogen bonding is controlled by the interaction of the propionates and the nearby electronic environments contributing to the modulation of the heme electron density state. Thus, we hypothesize that in hemeproteins with similar electrostatic environment the flexibility of the heme-6-propionate promotes a hydrogen bonding network loop between the 6-propionate, the heme ligand and nearby amino acids, tailoring in this way the electron density in the heme-ligand moiety.

Assuntos

RESUMO

Historically, hydrogen sulfide (H(2)S) has been regarded as a poisonous gas, with a wide spectrum of toxic effects. However, like ·NO and CO, H(2)S is now referred to as a signaling gas involved in numerous physiological processes. The list of reports highlighting the physiological effects of H(2)S is rapidly expanding and several drug candidates are now being developed. As with ·NO and CO, not a single H(2)S target responsible for all the biological effects has been found till now. Nevertheless, it has been suggested that H(2)S can bind to hemeproteins, inducing different responses that can mediate its effects. For instance, the interaction of H(2)S with cytochrome c oxidase has been associated with the activation of the ATP-sensitive potassium channels, regulating muscle relaxation. Inhibition of cytochrome c oxidase by H(2)S has also been related to inducing a hibernation-like state. Although H(2)S might induce these effects by interacting with hemeproteins, the mechanisms underlying these interactions are obscure. Therefore, in this review we discuss the current state of knowledge about the interaction of H(2)S with vertebrate and invertebrate hemeproteins and postulate a generalized mechanism. Our goal is to stimulate further research aimed at evaluating plausible mechanisms that explain H(2)S reactivity with hemeproteins.

Assuntos

RESUMO

Several hemoglobins were explored by UV-Vis and resonance Raman spectroscopy to define sulfheme complex formation. Evaluation of these proteins upon the reaction with H(2)O(2) or O(2) in the presence of H(2)S suggest: (a) the formation of the sulfheme derivate requires a HisE7 residue in the heme distal site with an adequate orientation to form an active ternary complex; (b) that the ternary complex intermediate involves the HisE7, the peroxo or ferryl species, and the H(2)S molecule. This moiety precedes and triggers the sulfheme formation.

Assuntos

RESUMO

Lucina pectinata haemoglobin II (HbII) transports oxygen in the presence of H(2)S to the symbiotic system in this bivalve mollusc. The composition of the haem pocket at the distal site includes TyrB10 and GlnE7, which are very common in other haem proteins. Obtaining crystals of oxyHbII at various pH values is required in order to elucidate the changes in the conformations of TyrB10 and GlnE7 and structural scenarios induced by changes in pH. Here, the growth of crystals of oxyHbII using the capillary counterdiffusion (CCD) technique at various pH values using a two-step protocol is reported. In the first step, a mini-screen was used to validate sodium formate as the best precipitating reagent for the growth of oxyHbII crystals. The second step, a pH screen typically used for optimization, was used to produce crystals in the pH range 4-9. Very well faceted prismatic ruby-red crystals were obtained at all pH values. X-ray data sets were acquired using synchrotron radiation of wavelength 0.886 A (for the crystals obtained at pH 5) and 0.908 A (for those obtained at pH 4, 8 and 9) to maximum resolutions of 3.30, 1.95, 1.85 and 2.00 A for the crystals obtained at pH 4, 5, 8 and 9, respectively. All of the crystals were isomorphous and belonged to space group P4(2)2(1)2.

Assuntos

RESUMO

Lucina pectinata is a bivalve mollusk that lives in the Southwestern coast of Puerto Rico and houses intracellular symbiotic bacteria. This peculiar organism contains three types of hemoglobin, each characterized by distinct physico-chemical properties. Hemoglobin I (HbI) is a sulfide-reactive protein that reacts with H(2)S to form ferric hemoglobin sulfide. In contrast, hemoglobin II and III are oxygen-reactive proteins that remain oxygenated in the presence of hydrogen sulfide. The partial coding region contained in the cDNA sequences we have cloned confirmed the L. pectinata HbIII amino sequence reported in the NCBI protein database) with a single amino acid difference (Asn72Asp; AsnE12Asp). The characterization of the full length mRNA coding for L. pectinata HbIII revealed an alternative polyadenylation site and an alternate transcription start site. The open reading frame (ORF) of the HbIII cDNA is composed of 459nts containing 153 codons. The initiation codon is preceded by 62 nts of untranslated region (5'UTR), whereas two 3'UTR regions of 640 nt and 455 nt long were identified, revealing the presence of alternative polyadenylation sites. Isoforms of the 3'UTR of HbIII only differed in the length of their sequences. It has been hypothesized that alternative polyadenylation acts through shortening of mRNA to regulate RNA localization, translation and stability. Interestingly, the HbIII mRNA is the only one of all the hemoglobin mRNAs from L. pectinata characterized so far with more than one 3'UTR. Primer extension products suggest two closely located start sites of HbIII mRNA transcription. We suggest that the L. pectinata hemoglobin genes may be under different cellular controls that direct them to exert their particular functions. These hypotheses need to be tested by functional studies and analysis of the regulatory elements of the cognate genes for L. pectinata hemoglobins.

Assuntos

RESUMO

Haemoglobin I from Lucina pectinata is a monomeric protein consisting of 142 amino acids. Its active site contains a peculiar arrangement of phenylalanine residues (PheB10, PheCD1 and PheE11) and a distal Gln at position E7. Active site mutations at positions B10, E7 and E11 were performed in deoxy haemoglobin I (HbI), followed by 10 ns molecular dynamic simulations. The results showed that the mutations induced changes in domains far from the active site producing more flexible structures than the native HbI. Distance analyses revealed that the heme pocket amino acids at positions E7 and B10 are extremely sensitive to any heme pocket residue mutation. The high flexibility observed by the E7 position suggests an important role in the ligand binding kinetics in ferrous HbI, while both positions play a major role in the ligand stabilisation processes. Furthermore, our results showed that E11Phe plays a pivotal role in protein stability.

RESUMO

This work examines the immobilization of myoglobin from horse skeletal muscle in hydrophilic polymer networks. Due to specific changes in the spectroscopic properties of hemoproteins during ligand binding, they could be employed in optical sensing devices. Two immobilization techniques were considered: imbibition and entrapment. Anionic hydrogels composed of methacrylic acid (MAA), cationic hydrogels composed of dimethylamino ethyl methacrylate (DMAEM), and neutral hydrogels composed of poly(ethylene glycol) monomethyl ether monomethacrylate (PEGMA; molecular weight = 200, 400, or 1000), all crosslinked with poly(ethylene glycol) dimethacrylate (PEGDMA) (molecular weight = 200, 600, or 1000), were synthesized by free-radical solution polymerization. By the imbibition method, MAA-based hydrogels incorporated the highest amount of myoglobin in comparison with PEGMA or DMAEM polymers. The evaluation of the correlation length of the networks revealed that MAA hydrogels had the highest correlation length in comparison with PEGMA-containing matrices or DMAEM hydrogels. Release experiments from MAA hydrogels at pHs 5.8 and 7.0 showed that the solute-transport mechanism was a combination of Fickian and chain relaxation diffusion. Myoglobin-loaded MAA hydrogels retained their heme reactivity after the immobilization process. The release of myoglobin incorporated by entrapment in MAA-PEGDMA hydrogels was highly influenced by the chain relaxation process. The diffusion coefficients of myoglobin incorporated by entrapment into anionic hydrogels were 2 orders of magnitude smaller (~10-13) than those for myoglobin incorporated by imbibition (10-11), both evaluated at pH 7.0. Substrate binding studies indicated that the protein biological activity was not compromised in those hydrogels loaded by the imbibition method, whereas prepolymeric solutions showed detrimental effects on protein stability.

RESUMO

Blood pressure elevation has been attributed in large part to the consumption of nitric oxide (NO) by extracellular hemoglobin (Hb) therapeutics following infusion in humans. We studied NO and hydrogen peroxide (H2O2) oxidative reaction kinetics of monomeric Hbs isolated from the clam Lucina pectinata to probe the effects of their distinctive heme pocket chemistries on ligand controls and heme oxidative stability. HbI (Phe43(CD1), Gln64(E7), Phe29(B10), and Phe68(E11)) reacted with high avidity with NO (k'(ox,NO) = 91 microM-1 s-1), whereas HbII (Phe44(CD1), Gln65(E7), Tyr30(B10), and Phe69(E11)) reacted at a much slower rate (k'(ox,NO)= 2.8 microM-1 s-1). However, replacing B10 (Phe) by Tyr in recombinant HbI (HbI PheB10Tyr) produced only a 2-fold reduction in the NO-induced oxidation rate (k'(ox,NO)= 49.9 microM-1 s-1). Among the clam Hbs, HbII exhibited the fastest NO dissociation and the slowest NO association with ferrous iron. Autoxidation, H2O2-mediated ferryl iron (FeIV) formation, and the subsequent heme degradation kinetics were much slower in HbII and HbI PheB10Tyr when compared to those of HbI. The Tyr(B10) residue appears to afford a greater heme oxidative stability advantage toward H2O2, whereas the close proximity of this residue together with Gln(E7) to the heme iron contributes largely to the distal control of NO binding. Engineering of second-generation Hb-based oxygen therapeutics that are resistant to NO/H2O2-driven oxidation may ultimately require further optimization of the heme pocket architecture to limit heme exposure to solvent.

Assuntos

RESUMO

Ferryl compounds [Fe(IV)=O] in living organisms play an essential role in the radical catalytic cycle and degradation processes of hemeproteins. We studied the reactions between H2O2 and hemoglobin II (HbII) (GlnE7, TyrB10, PheCD1, PheE11), recombinant hemoglobin I (HbI) (GlnE7, PheB10, PheCD1, PheE11), and the HbI PheB10Tyr mutant of L. pectinata. We found that the tyrosine residue in the B10 position tailors, in two very distinct ways, the reactivity of the ferryl species, compounds I and II. First, increasing the reaction pH from 4.86 to 7.50, and then to 11.2, caused the the second-order rate constant for HbII to decrease from 141.60 to 77.78 M-1 s-1, and to 2.96 M-1 s-1, respectively. This pH dependence is associated with the disruption of the heme-tyrosine (603 nm) protein moiety, which controls the access of the H2O2 to the hemeprotein active center, thus regulating the formation of the ferryl species. Second, the presence of compound I was evident in the UV-vis spectra (648-nm band) in the reactions of HbI and recombinant HbI with H2O2, This band, however, is completely absent in the analogous reaction with HbII and the HbI PheB10Tyr mutant. Therefore, the existence of a hydrogen-bonding network between the heme pocket amino acids (i.e., TyrB10) and the ferryl compound I created a path much faster than 3.0x10(-2) s-1 for the decay of compound I to compound II. Furthermore, the decay of the heme ferryl compound I to compound II was independent of the proximal HisF8 trans-ligand strength. Thus, the pH dependence of the heme-tyrosine moiety complex determined the overall reaction rate of the oxidative reaction limiting the interaction with H2O2 at neutral pH. The hydrogen-bonding strength between the TyrB10 and the heme ferryl species suggests the presence of a cycle where the ferryl consumption by the ferric heme increases significantly the pseudoperoxidase activity of these hemeproteins.

Assuntos

RESUMO

Lucina pectinata hemoglobin I (HbI), which is a ferric sulfide-reactive hemeprotein, contains a distal pocket characterized by the presence of GlnE7 and PheB10. To elucidate the structural-functional properties of HbI, oxygen binding kinetics and FTIR studies with recombinant HbI (rHbI) and a set of mutants were conducted using CO and CN- as sensors of the hemeprotein environment. Three nuCO modes were observed for rHbI at 1936 cm(-1) (A3, closed conformer) 1950 cm(-1) (A1,2, closed conformer) and 1960 cm(-1) (A0, open conformer). These nuCO were affected by substitution of GlnE7 and PheB10 in the CO complexes. The contribution of GlnE7 is demonstrated when this residue is replaced with Asn, Val or His. For instance, decreasing the positive electrostatic environment with GlnE7Val, causes an increase of 65% in the population of A0 and the disappearance and 55% reduction of the population of the A1,2 and A3 respectively. The contribution of PheB10 to the stabilization of ligands is also observed in the Leu and Tyr mutants. The PheB10Leu mutation produced an 8% decrease in the population of the A3 conformer while that of the A1,2 configuration increased by 30%. This suggests that GlnE7 and PheB10 contribute to the A3 conformer stabilizing the CO in a closed configuration. With CN- as probe no substantial differences in the nuCN was observed upon substitution of GlnE7 by Val while a slight down shift in the nuCN from 2120 cm(-1) to 2117 cm(-1) was observed in the PheB10Leu mutant. This implies that in HbICN GlnE7 moves away from the binding site while PheB10 remains in the vicinity of the bound CN-. Here, a mechanism in which the flexibility of the distal protein matrix coupled with hemeporphyrin movement toward a different configuration is suggested as an important process in the H2S transport and delivery in hemoglobin I.

Assuntos