RESUMO
A simple experimental protocol applying a quantitative ultrasound (QUS) pulse-echo technique was used to measure the acoustic parameters of healthy femoral diaphyses of Wistar rats in vivo. Five quantitative parameters [apparent integrated backscatter (AIB), frequency slope of apparent backscatter (FSAB), time slope of apparent backscatter (TSAB), integrated reflection coefficient (IRC), and frequency slope of integrated reflection (FSIR)] were calculated using the echoes from cortical and trabecular bone in the femurs of 14 Wistar rats. Signal acquisition was performed three times in each rat, with the ultrasound signal acquired along the femur's central region from three positions 1 mm apart from each other. The parameters estimated for the three positions were averaged to represent the femur diaphysis. The results showed that AIB, FSAB, TSAB, and IRC values were statistically similar, but the FSIR values from Experiments 1 and 3 were different. Furthermore, Pearson's correlation coefficient showed, in general, strong correlations among the parameters. The proposed protocol and calculated parameters demonstrated the potential to characterize the femur diaphysis of rats in vivo. The results are relevant because rats have a bone structure very similar to humans, and thus are an important step toward preclinical trials and subsequent application of QUS in humans.
Assuntos
Densidade Óssea/fisiologia , Fêmur/diagnóstico por imagem , Ultrassonografia/métodos , Animais , Diáfises/diagnóstico por imagem , Invenções , Modelos Biológicos , Ratos Wistar , Estatísticas não ParamétricasRESUMO
A simple experimental protocol applying a quantitative ultrasound (QUS) pulse-echo technique was used to measure the acoustic parameters of healthy femoral diaphyses of Wistar rats in vivo. Five quantitative parameters [apparent integrated backscatter (AIB), frequency slope of apparent backscatter (FSAB), time slope of apparent backscatter (TSAB), integrated reflection coefficient (IRC), and frequency slope of integrated reflection (FSIR)] were calculated using the echoes from cortical and trabecular bone in the femurs of 14 Wistar rats. Signal acquisition was performed three times in each rat, with the ultrasound signal acquired along the femur's central region from three positions 1 mm apart from each other. The parameters estimated for the three positions were averaged to represent the femur diaphysis. The results showed that AIB, FSAB, TSAB, and IRC values were statistically similar, but the FSIR values from Experiments 1 and 3 were different. Furthermore, Pearson's correlation coefficient showed, in general, strong correlations among the parameters. The proposed protocol and calculated parameters demonstrated the potential to characterize the femur diaphysis of rats in vivo. The results are relevant because rats have a bone structure very similar to humans, and thus are an important step toward preclinical trials and subsequent application of QUS in humans.
Assuntos
Animais , Densidade Óssea/fisiologia , Fêmur , Ultrassonografia/métodos , Diáfises , Invenções , Modelos Biológicos , Ratos Wistar , Estatísticas não ParamétricasRESUMO
Psoriasis is a chronic inflammatory skin disease whose pathogenesis and genetic background remain unclear. Considering that previous studies have suggested an association of psoriasis vulgaris (PV) and killer cell immunoglobulin-like receptors (KIRs), we typed 15 KIR genes and human leukocyte antigen (HLA)-Cw in 79 Brazilian Caucasoid patients with PV and 110 healthy controls by polymerase chain reaction (PCR) using sequence-specific oligonucleotides and sequence-specific primers. We did not observe a relevant increase in the frequency of the activating KIR2DS1 gene in the PV group [KIR2DS1, 46 of 79 cases (58.2%) vs 40 of 110 controls (36.4%)]. However, an association of KIR2DS1 with Cw*0602+ in 26.5% of PV patients was observed, while it was present in only 5.4% of controls. These results suggest that activating KIR2DS1 gene may not confer susceptibility to PV, and an association of KIR2DS1 gene with the HLA-Cw*0602+ was observed in these patients.
Assuntos
Antígenos HLA-C/genética , Psoríase/genética , Receptores KIR/genética , Alelos , Brasil/epidemiologia , Frequência do Gene , Predisposição Genética para Doença , Humanos , Psoríase/epidemiologiaRESUMO
INTRODUÇÃO: O ultra-som é um recurso bastante utilizado em Fisioterapia. Entretanto, a aplicação inadequada pode promover aquecimento insuficiente ou causar danos aos tecidos biológicos. Por isso, é importante que se conheçam os parâmetros ótimos para atingir a temperatura adequada, dentro dos limites seguros. A geração de calor é função dos parâmetros do equipamento e das propriedades físicas dos tecidos. Este trabalho apresentou um software que simula a variação da energia e da temperatura nos tecidos ao longo do tempo, permitindo ao usuário visualizar o padrão de aquecimento nos tecidos em função dos parâmetros. MATERIAIS E MÉTODOS: O software foi implementado com base na equação biotérmica, supondo quatro camadas (pele, gordura, músculo e osso), das quais o usuário pode alterar espessura e propriedades acústicas e térmicas. Pode-se também escolher intensidade, freqüência e tempo de aplicação. São apresentados gráficos com o percentual de energia absorvida ao longo da profundidade e a respectiva variação de temperatura por cada milímetro de tecido. RESULTADOS: Foram realizadas simulações exemplificando situações de interesse para a terapia, variando tempo de aplicação, espessura e freqüência do ultra-som. Podem ser observadas as diferenças do padrão de aquecimento, em especial nas fronteiras das interfaces. CONCLUSÕES: O software permitiu o estudo do aquecimento de tecidos biológicos por ultra-som e pode ser usado tanto para fins didáticos como para planejamento de doses de aquecimento, para ondas contínuas. Numa próxima etapa, pretende-se adequá-lo para estimar qual dose deve ser regulada no aparelho, para manter a temperatura desejada pelo tempo escolhido. Software disponível em: http://www.peb.ufrj.br/lus.htm.
INTRODUCTION: Ultrasound is a resource commonly used in Physical Therapy. However, its inadequate application may produce insufficient heating or cause damage to biological tissues. Therefore, the knowledge on the optimum parameters for achieving the appropriate temperature, within safe limits, is necessary. Heat generation depends on equipment parameters and the physical properties of tissues. This study presented a software that simulates the energy and temperature variation in tissues over time, thus allowing users to view the heating patterns in tissues as a function of these parameters. METHODS: The software was implemented based on the bioheat transfer equation for four layers (skin, fat, muscle and bone), in which the user can change the thickness and thermal or acoustic properties of these tissues. The intensity, frequency and time of application can also be chosen. Graphs showing the percentage energy absorption in relation to depth and the respective temperature variation per millimeter of tissue are presented. RESULTS: Simulations were produced to give examples of situations of interest for therapy, by varying the time of application, thickness and ultrasound frequency. Differences in heating patterns are seen, especially at the interfaces. CONCLUSIONS: The software made it possible to study the heating of biological tissues by ultrasound and can be used both for teaching purposes and for planning heating doses for continuous waves. In the future, the software will be adapted, in order to estimate which dose should be regulated in the apparatus to maintain the desired temperature for the time chosen. Software available in: http://www.peb.ufrj.br/lus.htm.
Assuntos
Modalidades de Fisioterapia , Ensino , Tratamento Térmico , UltrassomRESUMO
Clinical assessment of the blood clotting mechanism is usually made by measuring the time necessary for a sample of plasma to clot. In this work a semi-automatic method for measuring coagulation time is evaluated. It employs ultrasound, at 2.7 MHz, for monitoring variations of the viscosity in a plasma sample undergoing coagulation. The evaluation is performed by comparing measurements obtained by two well-known methods, the manual tilt tube and the fibrometer, with those obtained using the ultrasonic method. A total of 330 plasma samples from individuals with normal and altered homeostatic process were analysed. The experimental protocol follows two standard tests: the prothrombin time (141 samples) and the activated partial thromboplastin time (189 samples). The agreement between the three different methods is estimated statistically and it is shown that all the three can be used interchangeably for clinical purposes.
Assuntos
Tempo de Tromboplastina Parcial , Tempo de Protrombina , Ultrassom , Adolescente , Adulto , Biometria , Testes de Coagulação Sanguínea/instrumentação , Testes de Coagulação Sanguínea/estatística & dados numéricos , Criança , Estudos de Avaliação como Assunto , Feminino , Humanos , Técnicas In Vitro , Masculino , Pessoa de Meia-IdadeRESUMO
A prospective randomized trial compared the effectiveness of low-dose warfarin (LDW) to sequential compression devices (SCD) for deep venous thrombosis (DVT) prophylaxis in 95 patients after total hip arthroplasty (THA). Patients were 39 years of age or older, with no history of previous venous disease. Bilateral lower-extremity venography was used for thrombi detection. Venous thrombi occurred in 12 patients (all calf) on LDW (26.6%) and 3 patients with SCDs (one calf, two thigh) (6.0%). The incidence of DVT was significantly higher in the LDW group (P less than .006). In this study of average-risk patients, the use of SCDs significantly outperformed LDW as a prophylactic agent. However, the thrombi that did occur with SCDs were more critical.