RESUMO
Color change associated with significative positive improve in physical properties is a challenge in wood research. This study investigated the changes in the color of the Gmelina arborea wood which underwent a thermomechanical densification process. The process was performed by applying three different temperatures (140 °C, 160 °C and 180 °C) with thickness reduction of 20% and 40% using 2.5 MPa equivalent pressure. The color change of the pieces was analyzed through the CIEL * a * b * system. The relationship between the color and the equilibrium moisture content of the densified material was also analyzed. The process reduced the lightness and yellow hue of the wood, with increased red pigment resulting in darker coloration of the treated pieces. The higher temperature used resulted in more significant changes in wood tone and lower equilibrium moisture. The process proved to be effective to change the color and significantly reduce the equilibrium moisture content in wood samples where the density was increase by 20% and 50% compared to natural wood.
Assuntos
Temperatura Alta , Madeira , CorRESUMO
The objective of this study was to evaluate the production costs of processing logs from Eucalyptus grandis Hill ex Maiden and Eucalyptus saligna Sm, using two sawing pattern in a medium-sized sawmill. Alternating tangential sawing pattern was used for logs with a mean diameter of 33.0 cm and the radial sawing pattern for logs with a mean diameter of 47.0 cm. Based on the data obtained in the different sawing pattern, the fixed, variable and total costs were calculated and, subsequently, the average value for each of these costs. For the alternating tangential sawing pattern, the fixed cost represented 19.32% and the variable cost 80.68%. For the radial sawing pattern, the fixed cost represented 18.92% and the variable cost 81.08%. The radial sawing pattern presented lower average production costs, with a difference of 22.89 R$/m³, however there is no significant difference between the sawing pattern.