RESUMO

In copper smelting processes, acidic effluents are generated that contain inorganic contaminants such as arsenic and copper. Nowadays, the treatment of wastewater is done by physicochemical methods without copper recovery. Electrodialysis is an alternative process that can recover copper. Moreover, when electrocoagulation is applied to remove arsenic from wastewater, a more stable final sludge of less volume is obtained. The present research studies the application of a combined electrodialysis and electrocoagulation process to (1) recover Cu and (2) precipitate and remove arsenic simultaneously in the same batch reactor, using synthetic wastewater that simulates wastewater from a copper smelter. Copper and arsenic could be removed and separated by the electrodialysis part, and the electrocoagulation of arsenic was verified. With electrodialysis, the arsenic and copper removals were 67% and 100%, respectively, while 82% of the arsenic arriving at the electrocoagulation part of the cell could be precipitated and removed by this process. Initial concentrations were around 815 mg L-1 Cu and 7700 mg L-1 As. The optimal current was found to be 1.36 A due to the shorter treatment times necessary to get removal percentages, recovery percentages and energy/removed copper mass ratios in the same ranges as the values achieved with a current of 1.02 A. In summary, the combined process is a promising tool for simultaneous copper recovery and arsenic removal.

RESUMO

Mining activities have been a part of the history of Chile since time immemorial, generating pollution and environmental liabilities. Due to the lack of regulation, many tailings are deposited close to rivers or/and on unstable ground, near which towns have been built, generally in locations with no budget for their treatment. This study tested three plant species from Northern and Central Chile to remove total chromium, nickel, and zinc from tailings: Solidago chilensis, Haplopappus foliosus, and Lycium chilense, which complements the few existing studies on heavy metals removal with native or endemic Chilean shrubs. The experiments were conducted ex situ, and the initial and final concentrations of metals were determined in tailings and plants to obtain the removal efficiency, translocation and bioconcentration factors. Among these species, the best performance was obtained using Solidago chilensis, achieving removal efficiencies of 24% for Cr, 19% for Ni, and 17% for Zn, showing the ability to phytostabilize chromium and the higher resistance concerning the toxicity threshold. Haplopappus foliosus and Lycium chilense presented a slight tendency to stabilize chromium. Only Solidago chilensis showed little ability to extract Zn.

Assuntos

RESUMO

In Chile, there are several abandoned mine tailing impoundments near population centers that need to be remediated. In this study, the ability of Oxalis gigantea, Cistanthe grandiflora, and Puya berteroniana to remove Zn, Ni, and Cr from mine tailings was evaluated. The plants' removal efficiency, bioconcentration, and translocation factors regarding these metals were determined to assess the ability of certain endemic species from Northern and Central Chile to extract or stabilize metals. After a period of seven months, the chemical analysis of plants and tailings, together with the statistical treatment of data, indicated the inability of all the species to translocate Ni, Cr, or Zn with a translocation factor lower than one. The results showed the stabilizing character of Oxalis gigantea, Puya berteroniana, and Cistanthe grandiflora for Zn, with a bioconcentration factor close to 1.2 in all cases, and the same ability of the latter two species for Cr, with a bioconcentration factor of 1.5 in the case of Cistanthe grandiflora and 1.7 for Puya berteroniana. Finally, a removal efficiency of 9.3% was obtained with Cistanthe grandiflora for Cr and 15% for Ni; values lower than 6.4% were obtained for Zn in all cases. Improvements in the process should be sought to enhance the performance of these species for the accumulation of the target metals.

Assuntos

RESUMO

The analysis of Cu distribution in pre-treated mine tailings after electrodialytic remediation was carried out by using two methods of sequential extraction. The initial content of copper in the tailings was 1109 mg Cu/kg of dry tailing, where close to 40% of the sample in weight corresponded to a soluble fraction. The tailing was treated with a leaching solution for 24 h. Three different solutions were tested: H2SO4 + HNO3 with pH = 1.9; H2SO4 + HNO3 with pH = 4.2; and NH4Cl 0.8 mol/L with pH = 5.5. After that, electrodialytic remediation experiments were carried out using an electric field of 2.7 V/cm for 15 days. The best performance for the complete cell was obtained with H2SO4 + HNO3 solutions, with a copper removal efficiency in the range of 62% to 67% and a current efficiency between 6% and 9%. The results of the remaining copper concentration between anode and cathode, from both procedures of sequential extraction, showed similar trends. The differences were mainly attributed to the use of different extractant solutions and extraction times. Soluble and exchangeable fractions were easily removed, with efficiencies higher than 80%. The lowest copper removal efficiency was obtained with NH4Cl 0.8 mol/L.

Assuntos

RESUMO

Mine tailings have been analyzed by a sequential extraction procedure after their pre-treatment with a leaching solution for 24 h and electrodialytic remediation during 15 days with a constant electric field of 2.7 V cm-1. Four leaching solutions were tested: H2SO4 + HNO3 (2:1 vol.) pH = 1.9; H2SO4 + HNO3 (2:1 vol) pH = 4.2; NH4Cl 0.8M, pH = 5.5 and 30% H2O2 adjusted to pH 2 with HNO3 1M + HCl 1M. After the treatment, the tailings were divided in six slices from anode to cathode. The highest removal efficiency of copper was obtained with H2SO4 + HNO3 pH = 1.9, which allows one to remove 67% of the copper in the total cell and 85% of the copper in the slice closest to anode. The same solution with pH = 4.2 allows one to remove 62% of the total copper. The analysis realized by the sequential extraction method indicates the easy removal of water-soluble and exchangeable fractions in all experiments, moreover, residual and sulfide are the less mobile fractions. The general trend was the movement of copper associated to different fractions from anode to cathode and its accumulation closest to the cathode in the case of exchangeable, Fe-Mn oxides and acid soluble fractions, possibly due to some precipitation of copper compounds associated with less acidic conditions.

Assuntos

RESUMO

Electro-kinetic remediation (EKR) with sinusoidal electric field obtained simultaneously with DC/AC voltage reduce the polarization of the EKR with DC voltage. The DC voltage value defines the presence of a periodic polarity reversal of the cell and the electrical charge for electro-kinetic transport. In this case, the AC frequency favors the breaking of polarization conditions resulting from the EKR with DC voltage. However, with high frequencies a negative effect occurs where the tailings behave as a filter circuit, discriminating frequencies of an electric signal. The goal of this work is to analyse the electrical behaviour of tailings in EKR experiments. The conditions selected were: DC/AC voltages: 10/15 and 20/25 V (peak values), and AC voltage frequencies 50-2000 Hz. When the AC frequency reaches 2000 Hz, the copper removal tends to zero, indicating that the tailing behaves as a high-pass filter in which the DC voltage was filtered out.

Assuntos

RESUMO

Sorption experiments for cadmium removal using two brown macroalgae Lessonia nigrescens and Durvillaea antarctica were carried out. Although both types of algae were capable of retaining cadmium, differences in their performance were observed. The optimum pH was 3.7±0.2, and to achieve the equilibrium, 5 days of contact time were necessary for both biosorbents. The maximum experimental uptake obtained was similar for the two biosorbents: 95.3 mg Cd g(-1) by D. antarctica and 109.5 mg Cd g(-1) by L. nigrescens. The Langmuir model described the equilibrium sorption isotherms very well for both biosorbents and the Lagergren pseudo primer order model described the sorption kinetics for L. nigrescens satisfactorily and the Ho and Mckay pseudo second order model for D. antarctica. It was found that cadmium uptake by D. antarctica was faster than by L. nigrescens.

Assuntos

RESUMO

Mining activities generate large amounts of wastewater, which contain heavy metals of elevated concentration according to legislative threshold values. Therefore, treatment is necessary, and there has been a recent focus on more environmentally friendly methods. One of these is biosorption, where heavy metals are adsorbed from the wastewater via materials of biological origin. In this work copper sorption capacity, kinetics and isotherms of different low-cost residual agricultural materials was studied. Seven different materials were investigated: peanut shells, nut shells, plum seeds, eucalyptus bark, olive pips, peach stones, and pine sawdust. The best sorption results were obtained in acidic pH for olive pips, peach stones and pine sawdust. Furthermore, it was observed that at higher pH, a longer duration of time is required before equilibrium is established. In general, the better biosorbents were found to be peach stones and pine sawdust with a sorption capacity at acidic pH around 10-15 mgCu g(-1) biosorbent. In addition it was found, that the Ho and McKay second order model described the sorption kinetics very satisfactorily. Both Langmuir and Freundlich models described the equilibrium sorption isotherms well for the biosorbents studied - with the last model being slightly better.

Assuntos

RESUMO

This work shows the laboratory results of nine electrodialytic remediation experiments on copper mine tailings. A newly designed remediation cell, where the solids were kept in suspension by airflow, was tested. The results show that electric current could remove copper from suspended tailings applying 40 mA during 7 days. The liquid-to-solid ratios used were 3, 6 and 9 mL g(- 1). With addition of sulfuric acid, the process was enhanced because the pH decreased to either 2 or 4, and copper was therefore dissolved. The maximum copper removal was 80% with addition of sulfuric acid in 7-day experiment at 40 mA, with approximately 137.5 g mine tailings on dry basis. The removal for a static (baseline) experiment only amounted 15% when passing approximately the same amount of charge through 130 g of mine tailings. The use of air bubbling to keep the tailings suspended increased the removal efficiency from 1% to 80% compared to experiments with no stirring but with the same operational conditions. This showed the crucial importance of having the solids in suspension and not settled during the remediation.

Assuntos

RESUMO

This work shows the results of four Electro-Fenton laboratory tests to reduce the chemical oxygen demand (COD) in spent caustic solutions. The treatment consisted of (i) a pH reduction followed by (ii) an Electro-Fenton process, which was analyzed in this work. The Fenton's reagent was produced in a specially designed reactor, where the waste stream flowed through a labyrinth made by ferrous plates. These plates acted as sacrificial anodes-releasing Fe(2 +) cations to the solution, where H(2)O(2) was also added. The Electro-Fenton process was analyzed varying the ferrous ion concentration ([Fe(+ 2)]), the spent caustic's initial temperature and the initial pH. Close to 95% removal of COD (from 8800 mg L(- 1)) was achieved at a pH of 4, a temperature of 40 degrees C and 100 mg L(- 1) of Fe(+ 2) (applying 1 A). Two models were considered to simulate the behavior of the reactor considering (i) axial dispersion and (ii) kinetic rate, respectively. The model that was based on kinetics, proved to be the slightly closest fit to the experimental values.

Assuntos

RESUMO

Mine tailing from the El Teniente-Codelco copper mine situated in VI Region of Chile was analysed in order to evaluate the mobility and speciation of copper in the solid material. Mine tailing was sampled after the rougher flotation circuits, and the copper content was measured to 1150 mg kg (-1) dry matter. This tailing was segmented into fractions of different size intervals: 0-38, 38-45, 45-53, 53-75, 75-106, 106-150, 150-212, and >212 microm, respectively. Copper content determination, sequential chemical extraction, and desorption experiments were carried out for each size interval in order to evaluate the speciation of copper. It was found that the particles of smallest size contained 50-60% weak acid leachable copper, whereas only 32% of the copper found in largest particles could be leached in weak acid. Copper oxides and carbonates were the dominating species in the smaller particles, and the larger particles contained considerable amounts of sulphides.

Assuntos

RESUMO

Mining activities in Chile have generated large amounts of solid waste, which have been deposited in mine tailing impoundments. These impoundments cause concern to the communities due to dam failures or natural leaching to groundwater and rivers. This work shows the laboratory results of nine electrodialytic remediation experiments on copper mine tailings. The results show that electric current could remove copper from watery tailing if the potential gradient was higher than 2 V/cm during 21 days. With addition of sulphuric acid, the process was enhanced because the pH decreased to around 4, and the copper by this reason was released in the solution. Furthermore, with acidic tailing the potential gradient was less than 2 V/cm. The maximum copper removal reached in the anode side was 53% with addition of sulphuric acid in 21 days experiment at 20 V using approximately 1.8 kg mine tailing on dry basis. In addition, experiments with acidic tailing show that the copper removal is proportional with time.

Assuntos