RESUMO
Background: The exact geometric pathogenesis of leaflet tethering in ischemic mitral regurgitation (IMR) and the relative contribution of each component of the mitral valve complex (MVC) remain largely unknown. In this study, we sought to further elucidate mitral valve (MV) leaflet remodeling and papillary muscle dynamics in an ovine model of IMR with magnetic resonance imaging (MRI) and 3-dimensional echocardiography (3DE). Methods: Multimodal imaging combining 3DE and MRI was used to analyze the MVC at baseline, 30 minutes post-myocardial infarction (MI), and 12 weeks post-MI in ovine IMR models. Advanced 3D imaging software was used to trace the MVC from each modality, and the tracings were verified against resected specimens. Results: 3DE MV remodeling was regionally heterogenous and observed primarily in the anterior leaflet, with significant increases in surface area, especially in A2 and A3. The posterior leaflet was significantly shortened in P2 and P3. Mean posteromedial papillary muscle (PMPM) volume was decreased from 1.9 ± 0.2 cm3 at baseline to 0.9 ± 0.3 cm3 at 12 weeks post-MI (P < .05). At 12 weeks post-MI, the PMPM was predominately displaced horizontally and outward along the intercommissural axis with minor apical displacement. The subvalvular contribution to tethering is a combination of unilateral movement, outward displacement, and degeneration of the PMPM. These findings have led to a proposed new framework for characterizing PMPM dynamics in IMR. Conclusions: This study provides new insights into the complex interrelated and regionally heterogenous valvular and subvalvular mechanisms involved in the geometric pathogenesis of IMR tethering.
RESUMO
BACKGROUND: Unlike arteries, in which regionally distinct hemodynamics are associated with phenotypic heterogeneity, the relationships between endocardial endothelial cell phenotype and intraventricular flow remain largely unexplored. We investigated regional differences in left ventricular wall shear stress and their association with endocardial endothelial cell gene expression. METHODS AND RESULTS: Local wall shear stress was calculated from 4-dimensional flow magnetic resonance imaging in 3 distinct regions of human (n=8) and pig (n=5) left ventricle: base, adjacent to the outflow tract; midventricle; and apex. In both species, wall shear stress values were significantly lower in the apex and midventricle relative to the base; oscillatory shear index was elevated in the apex. RNA sequencing of the endocardial endothelial cell transcriptome in pig left ventricle (n=8) at a false discovery rate ≤10% identified 1051 genes differentially expressed between the base and the apex and 327 between the base and the midventricle; no differentially expressed genes were detected at this false discovery rate between the apex and the midventricle. Enrichment analyses identified apical upregulation of genes associated with translation initiation including mammalian target of rapamycin, and eukaryotic initiation factor 2 signaling. Genes of mitochondrial dysfunction and oxidative phosphorylation were also consistently upregulated in the left ventricular apex, as were tissue factor pathway inhibitor (mean 50-fold) and prostacyclin synthase (5-fold)-genes prominently associated with antithrombotic protection. CONCLUSIONS: We report the first spatiotemporal measurements of wall shear stress within the left ventricle and linked regional hemodynamics to heterogeneity in ventricular endothelial gene expression, most notably to translation initiation and anticoagulation properties in the left ventricular apex, in which oscillatory shear index is increased and wall shear stress is decreased.
Assuntos
Endocárdio/metabolismo , Ventrículos do Coração/metabolismo , RNA/genética , Resistência ao Cisalhamento/fisiologia , Animais , Técnicas de Imagem Cardíaca , Endocárdio/diagnóstico por imagem , Endocárdio/fisiologia , Feminino , Perfilação da Expressão Gênica , Biblioteca Genômica , Ventrículos do Coração/diagnóstico por imagem , Hemodinâmica , Humanos , Imageamento por Ressonância Magnética , Masculino , Suínos , Função Ventricular Esquerda/fisiologia , Adulto JovemRESUMO
OBJECTIVE: Whereas uncomplicated acute type B aortic dissections are often medically managed with good outcomes, a subset develop subacute or chronic aneurysmal dilation. We hypothesized that computational fluid dynamics (CFD) simulations may be useful in identifying patients at risk for this complication. METHODS: Patients with acute type B dissection complicated by rapidly expanding aortic aneurysms (N = 7) were compared with patients with stable aortic diameters (N = 7). Three-dimensional patient-specific dissection geometries were generated from computed tomography angiography and used in CFD simulations of pulsatile blood flow. Hemodynamic parameters including false lumen flow and wall shear stress were compared. RESULTS: Patients with rapid aneurysmal degeneration had a growth rate of 5.3 ± 2.7 mm/mo compared with those with stable aortic diameters, who had rates of 0.2 ± 0.02 mm/mo. Groups did not differ in initial aortic diameter (36.1 ± 2.9 vs 34.4 ± 3.6 mm; P = .122) or false lumen size (22.6 ± 2.9 vs 20.2 ± 4.5 mm; P = .224). In patients with rapidly expanding aneurysms, a greater percentage of total flow passed through the false lumen (78.3% ± 9.3% vs 56.3% ± 11.8%; P = .016). The time-averaged wall shear stress on the aortic wall was also significantly higher (12.6 ± 3.7 vs 7.4 ± 2.8 Pa; P = .028). CONCLUSIONS: Hemodynamic parameters derived from CFD simulations of acute type B aortic dissections were significantly different in dissections complicated by aneurysm formation. Thus, CFD may assist in predicting which patients may benefit from early stent grafting.
Assuntos
Aneurisma Aórtico/diagnóstico por imagem , Dissecção Aórtica/diagnóstico por imagem , Idoso , Dissecção Aórtica/fisiopatologia , Angiografia , Aneurisma Aórtico/fisiopatologia , Simulação por Computador , Feminino , Humanos , Hidrodinâmica , Imageamento Tridimensional , Masculino , Pessoa de Meia-Idade , Estudos Retrospectivos , Tomografia Computadorizada por Raios XRESUMO
OBJECTIVE: Aortic wall thickness (AWT) is important for anatomic description and biomechanical modeling of aneurysmal disease. However, no validated, noninvasive method for measuring AWT exists. We hypothesized that semiautomated image segmentation algorithms applied to computed tomography angiography (CTA) can accurately measure AWT. METHODS: Aortic samples from 10 patients undergoing open thoracoabdominal aneurysm repair were taken from sites of the proximal or distal anastomosis, or both, yielding 13 samples. Aortic specimens were fixed in formalin, embedded in paraffin, and sectioned. After staining with hematoxylin and eosin and Masson's trichrome, sections were digitally scanned and measured. Patients' preoperative CTA Digital Imaging and Communications in Medicine (DICOM; National Electrical Manufacturers Association, Rosslyn, Va) images were segmented into luminal, inner arterial, and outer arterial surfaces with custom algorithms using active contours, isoline contour detection, and texture analysis. AWT values derived from image data were compared with measurements of corresponding pathologic specimens. RESULTS: AWT determined by CTA averaged 2.33 ± 0.66 mm (range, 1.52-3.55 mm), and the AWT of pathologic specimens averaged 2.36 ± 0.75 mm (range, 1.51-4.16 mm). The percentage difference between pathologic specimens and CTA-determined AWT was 9.5% ± 4.1% (range, 1.8%-16.7%). The correlation between image-based measurements and pathologic measurements was high (R = 0.935). The 95% limits of agreement computed by Bland-Altman analysis fell within the range of -0.42 and 0.42 mm. CONCLUSIONS: Semiautomated analysis of CTA images can be used to accurately measure regional and patient-specific AWT, as validated using pathologic ex vivo human aortic specimens. Descriptions and reconstructions of aortic aneurysms that incorporate locally resolved wall thickness are feasible and may improve future attempts at biomechanical analyses.
Assuntos
Aorta Torácica/diagnóstico por imagem , Aneurisma da Aorta Torácica/diagnóstico por imagem , Aortografia/métodos , Tomografia Computadorizada Multidetectores , Interpretação de Imagem Radiográfica Assistida por Computador , Idoso , Algoritmos , Aorta Torácica/cirurgia , Aneurisma da Aorta Torácica/cirurgia , Automação , Feminino , Humanos , Masculino , Valor Preditivo dos Testes , Reprodutibilidade dos TestesRESUMO
OBJECTIVE: Growing evidence suggests that peak wall stress (PWS) derived from finite element analysis (FEA) of abdominal aortic aneurysms (AAAs) predicts clinical outcomes better than diameter alone. Prior models assume uniform wall thickness (UWT). We hypothesize that the inclusion of locally variable wall thickness (VWT) into FEA of AAAs will improve its ability to predict clinical outcomes. METHODS: Patients with AAAs (n = 26) undergoing radiologic surveillance were identified. Custom MATLAB algorithms generated UWT and VWT aortic geometries from computed tomography angiography images, which were subsequently loaded with systolic blood pressure using FEA. PWS and aneurysm expansion (as a proxy for rupture risk and the need for repair) were examined. RESULTS: The average radiologic follow-up time was 22.0 ± 13.6 months and the average aneurysm expansion rate was 2.8 ± 1.7 mm/y. PWS in VWT models significantly differed from PWS in UWT models (238 ± 68 vs 212 ± 73 kPa; P = .025). In our sample, initial aortic diameter was not found to be correlated with aneurysm expansion (r = 0.26; P = .19). A stronger correlation was found between aneurysm expansion and PWS derived from VWT models compared with PWS from UWT models (r = 0.86 vs r = 0.58; P = .032 by Fisher r to Z transformation). CONCLUSIONS: The inclusion of locally VWT significantly improved the correlation between PWS and aneurysm expansion. Aortic wall thickness should be incorporated into future FEA models to accurately predict clinical outcomes.
Assuntos
Aorta Abdominal/diagnóstico por imagem , Aneurisma da Aorta Abdominal/diagnóstico por imagem , Aortografia/métodos , Simulação por Computador , Modelos Cardiovasculares , Tomografia Computadorizada por Raios X , Idoso , Idoso de 80 Anos ou mais , Aorta Abdominal/fisiopatologia , Aneurisma da Aorta Abdominal/fisiopatologia , Fenômenos Biomecânicos , Progressão da Doença , Feminino , Análise de Elementos Finitos , Hemodinâmica , Humanos , Masculino , Pessoa de Meia-Idade , Valor Preditivo dos Testes , Prognóstico , Interpretação de Imagem Radiográfica Assistida por Computador , Estudos Retrospectivos , Estresse Mecânico , Fatores de TempoRESUMO
BACKGROUND: Wall stress calculated using finite element analysis has been used to predict rupture risk of aortic aneurysms. Prior models often assume uniform aortic wall thickness and fusiform geometry. We examined the effects of including local wall thickness, intraluminal thrombus, calcifications, and saccular geometry on peak wall stress (PWS) in finite element analysis of descending thoracic aortic aneurysms. METHODS AND RESULTS: Computed tomographic angiography of descending thoracic aortic aneurysms (n=10 total, 5 fusiform and 5 saccular) underwent 3-dimensional reconstruction with custom algorithms. For each aneurysm, an initial model was constructed with uniform wall thickness. Experimental models explored the addition of variable wall thickness, calcifications, and intraluminal thrombus. Each model was loaded with 120 mm Hg pressure, and von Mises PWS was computed. The mean PWS of uniform wall thickness models was 410 ± 111 kPa. The imposition of variable wall thickness increased PWS (481 ± 126 kPa, P<0.001). Although the addition of calcifications was not statistically significant (506 ± 126 kPa, P=0.07), the addition of intraluminal thrombus to variable wall thickness (359 ± 86 kPa, P ≤ 0.001) reduced PWS. A final model incorporating all features also reduced PWS (368 ± 88 kPa, P<0.001). Saccular geometry did not increase diameter-normalized stress in the final model (77 ± 7 versus 67 ± 12 kPa/cm, P=0.22). CONCLUSIONS: Incorporation of local wall thickness can significantly increase PWS in finite element analysis models of thoracic aortic aneurysms. Incorporating variable wall thickness, intraluminal thrombus, and calcifications significantly impacts computed PWS of thoracic aneurysms; sophisticated models may, therefore, be more accurate in assessing rupture risk. Saccular aneurysms did not demonstrate a significantly higher normalized PWS than fusiform aneurysms.