RESUMO
Graphene oxide (GO) microfibers with controlled and homogeneous shapes and tunable diameters were fabricated using the 3 dimensional (3D) hydrodynamic focusing concept on a microfluidic device. Thermal and microwave treatments are used to obtain reduced graphene oxide (rGO) microfibers with outstanding electrical properties, thus enabling the development of ionic liquid-gate field-effect transistors (FET) based on graphene derivative microfibers.
RESUMO
We propose a novel platform for detecting as well as measuring the size of individual droplets in microfluidic channels using microstrip transmission lines. The most outstanding feature of our platform is that, as opposed to previous related works, its design allows for the droplet to flow in a microfluidic channel fabricated between the top strip and the ground plane of a microstrip transmission line. This provides enhanced interaction of the electromagnetic field with the detected droplets. The proposed design allows us to measure droplet size directly from the phase of the microwave signal, without the need for a resonator. The platform is based on low temperature co-fired ceramic (LTCC), which makes it more compatible with Radiofrequency (RF) and microwave technology than platforms used in previous works. With this platform, we are able to measure droplets as small as 150 µm in radius. It is worth pointing out that our device could also be used for detection, counting and measurement of other microscopic objects.
RESUMO
Nowadays, the attainment of microsystems that integrate most of the stages involved in an analytical process has raised an enormous interest in several research fields. This approach provides experimental set-ups of increased robustness and reliability, which simplify their application to in-line and continuous biomedical and environmental monitoring. In this work, a novel, compact and autonomous microanalyzer aimed at multiwavelength colorimetric determinations is presented. It integrates the microfluidics (a three-dimensional mixer and a 25 mm length "Z-shape" optical flow-cell), a highly versatile multiwavelength optical detection system and the associated electronics for signal processing and drive, all in the same device. The flexibility provided by its design allows the microanalyzer to be operated either in single fixed mode to provide a dedicated photometer or in multiple wavelength mode to obtain discrete pseudospectra. To increase its reliability, automate its operation and allow it to work under unattended conditions, a multicommutation sub-system was developed and integrated with the experimental set-up. The device was initially evaluated in the absence of chemical reactions using four acidochromic dyes and later applied to determine some key environmental parameters such as phenol index, chromium(VI) and nitrite ions. Results were comparable with those obtained with commercial instrumentation and allowed to demonstrate the versatility of the proposed microanalyzer as an autonomous and portable device able to be applied to other analytical methodologies based on colorimetric determinations.