RESUMO

To evaluate the physical properties of enamel submitted to hydrogen peroxide (HP) incorporated with titanium dioxide nanoparticles (NP) co-doped with nitrogen and fluorine and irradiated with violet LED light (LT). Enamel-dentin disks were randomly allocated (T0) into groups, according to HP (HP6, HP15, or HP35) and NP (no NP, 5NP, or 10NP) concentrations, and irradiated or not with LT. A negative control (NC) group was set. After three bleaching sessions (T1, T2, and T3), specimens were stored in saliva for 14 days (T4). Enamel surface microhardness number (KHN), surface roughness (Ra), cross-sectional microhardness (ΔS), energy-dispersive spectroscopy (EDS), scanning electron (SEM), and polarized light (PLM) microscopies were performed. Surface KHN was significantly influenced by NP over time, independently of LT irradiation. At T3 and T4, gels with 5NP and 10NP exhibited no KHN differences compared to NC and baseline values, which were not observed under the absence of NP. NP incorporation did not statistically interfere with the ΔS and Ra. PLM images exhibited surface/subsurface darkening areas suggestive of demineralizing regions. SEM demonstrated some intraprismatic affection in the groups without NP. EDS reported a higher enamel calcium to phosphorus ratio following 10NP gels applications. Gels with NP maintained the enamel surface microhardness levels and seemed to control surface morphology, upholding the mineral content. None of the proposed experimental protocols have negatively influenced the enamel surface roughness and the cross-sectional microhardness.

RESUMO

OBJECTIVES: The objective of the study is to evaluate the bleaching potential of 6% hydrogen peroxide (6% HP) gels containing NF_TiO2 or Nb2O5 irradiated with a violet LED light and the effects on enamel mineral content and surface morphology. METHODS: Particles were synthesized, and experimental gels were chemically analyzed by preliminary and accelerated stability tests, pH, and HP decomposition rate. Bovine enamel blocks were treated with 6% HP gels containing (n = 10): 5% NF_TiO2, 5% Nb2O5, 2.5% NF_TiO2 + 2.5% Nb2O5 or without particles (6% HP), irradiated or not with LED, and the control was treated with 35% HP. Color (∆E00) and whitening index (∆WID) variations, surface microhardness (SH), average roughness (∆Ra), Ca-P concentration (EDS), and enamel morphology (SEM) were assessed. Bleaching was performed in 3 sessions of 30 min and 7-day intervals. Data were submitted to two- (pH, decomposition rate, ∆E00, and ∆WID) or three-way ANOVA and Bonferroni (SH), Kruskal-Wallis (∆Ra), and Dunnet tests (α = 0.05). RESULTS: No changes in the gel's color, odor, or translucency were observed. The pH (6 to 6.5) remained stable over time, and light irradiation boosted the HP decomposition rate. NF_TiO2 and Nb2O5-containing gels displayed higher ∆E00 and ΔWID when light-irradiated (p < 0.05). Nb2O5 and Nb2O5 + NF_TiO2 decreased enamel SH (p < 0.05), but no SH changes were found among groups (p > 0.05). No differences among groups were noted in ∆Ra, Ca-P content, and enamel morphology after treatments (p > 0.05). CONCLUSION: Experimental light-irradiated 6% HP gels containing NF_TiO2 or Nb2O5 were chemically stable and exhibited bleaching potential comparable with 35% HP. CLINICAL RELEVANCE: Low-concentrated HP gels containing NF_TiO2 or Nb2O5 and light-irradiated stand as a possible alternative to in-office bleaching.

Assuntos

RESUMO

This study developed an experimental flowable composite incorporated with niobium pentoxide (Nb2O5) combined or not with titanium dioxide co-doped with fluorine and nitrogen (NF_TiO2) and evaluated the mechanical and antibacterial properties. The experimental flowable composite (TEGDMA + BisGMA 1:1 + 60%wt - inorganic filler - borosilicate 0.7 µm) was formulated according to the type and concentration of Nb2O5 and NF_TiO2 (0.5, 1, 1.5 and 2 wt%) or NF_TiO2 + Nb2O5 (0.25, 0.5, 0.75 and 1 wt% - 1:1). The control groups were formed by the experimental composite without the incorporation of Nb2O5 and/or NF_TiO2 (GC-E) and by a commercial flowable composite (GC). The characterization of the surface of the composite and its particles was carried out using scanning electron microscopy (SEM) and energy dispersive x-rays (EDX). Specimens were manufactured and subjected to mechanical tests of flexural strength (FS) (n = 12), flexural modulus (FM) (n = 12), roughness (Ra) (n = 10), microhardness (n = 10), and contact angle (n = 10); and, to evaluate the antibacterial activity, they were submitted to tests of biofilm formation against S. mutans (CFU/mL) (n = 5), biofilm biomass by dry weight (n = 5) and confocal laser microscopy (%LIVE/DEAD) (n = 5). Data were submitted to one-way ANOVA and Tukey's post-hoc and, those that were not homoscedastic, but with normality, were submitted to Welch's ANOVA and Games-Howell's post-hoc. Dunnet's test was used to compare the controls with the other experimental groups (α = 5). The Nb2O5 particles had an average size of 32.4 µm and the nanoparticles (NPs) of NF_TiO2, 10 nm. EDX analysis identified isolated peaks of N, F, Ti, and Nb confirming the presence of these particles in the resin matrix. The 1.5% NF_TiO2 group had a higher FS and FM than the controls (p < 0.05). GC showed higher microhardness between groups (p < 0.05). There was no difference between the experimental groups regarding contact angle and roughness (p > 0.05), except for GC, which had the highest Ra values and the lowest contact angle between groups (p < 0.05). Composites containing 0.5%, 1%, 1.5%, and 2% Nb2O5, 1%, 1.5%, and 2% NF_TiO2 and 2% Nb2O5 + NF_TiO2 showed lower biofilm formation (p < 0.05), lower total biofilm biomass (p < 0.05), and a higher percentage of dead cells (44%, 52%, 52%, 79%, 42% 43%, 62%, 65%, respectively) than GC and GC-E (5% and 1%, respectively). It is concluded that the incorporation of 1.5% NF_TiO2 promoted a greater FS and FM among the experimental composites and that the addition of Nb2O5 particles (0.5%, 1%, 1.5%, and 2%), NF_TiO2 (1%, 1.5% and 2%) and the combination Nb2O5 + NF_TiO2 (2%) showed significant antibacterial effects.

Assuntos

RESUMO

Aim: To determine if the artificial staining with black tea (BT) influences the enamel microhardness before in-office bleaching and if BT staining is necessary to evaluate the efficacy of bleaching with 35% hydrogen peroxide Methods: Enamel/dentin blocks were randomized into groups according to the staining protocol (n=5/group): (CO) control ­ maintained in artificial saliva solution (AS); (BT4) immersed in black tea solution for 4 h; (BT24) immersed in black tea solution for 24 h. After the staining protocols, all specimens were kept in AS for one week, followed by bleaching (three sessions of HP application for 40 min). Knoop surface microhardness (kgF/mm2) was determined at baseline (T0), after staining (T1), after 7 days of storage in AS (T2), and after bleaching (T3). The color (∆E00) and coordinate changes (∆L, ∆a, ∆b) were measured using a digital spectrophotometer at T0 and T3. Data were submitted to one-way (∆E00, ∆L, ∆a, ∆b) or two-way ANOVA repeated measures (kgF/mm2) and Tukey's test (a=5%). Results: The staining protocols (BT4 and BT24) promoted significantly lower microhardness (T1 and T2, p<0.05) than CO, whereas CO was the only group to maintain microhardness values over time. Bleaching promoted perceptible ∆E00 without a significant difference among the groups regardless of the staining protocol (p=0.122). CO and BT4 showed no differences in terms of ∆L and ∆a (p>0.05), but BT4 displayed a higher ∆b than CO. Conclusion:The artificial staining with BT negatively affected the enamel surface microhardness and was not essential to evaluate the efficacy of 35% hydrogen peroxide bleaching

Assuntos

RESUMO

The present study reports on the development and testing of novel bleaching agents containing co-doped metaloxide nanoparticles (NP; 0%, 5%, 10% v/w) and hydrogen peroxide (HP, 0%, 6%, 15%, and 35%). Bovine blocks (n = 200, A = 36 mm2) were obtained and randomly distributed into experimental groups (n = 10/group). NPs were incorporated into gels before bleaching (3 sessions, 7 days apart, 30 min/session, irradiated with violet light-LT). Color changes (ΔE00, ΔWID), mineral content (CO32−, PO43−), and topography were assessed (spectrophotometer, ATR-FTIR, and AFM) before and after bleaching procedures (14 days). Metabolic status and three-dimensional components of non-disrupted Streptococcus mutans biofilms were investigated using a multimode reader and confocal microscopy. The results indicate that ΔE00 and ΔWID significantly increased with NPs' concentrations and LT. The enamel's mineral ratio was adversely impacted by HP, but alterations were less pronounced when using NP-containing gels. The enamel's topography was not damaged by the bleaching protocols tested. The bioluminescence results show that bleaching protocols do not render latent antibacterial properties to enamel, and the confocal microscopy results demonstrate that the 3-dimensional distribution of the components was affected by the protocols. The proposed nanotechnology improved the bleaching efficacy of experimental materials independent of hydrogen peroxide or irradiation and did not adversely impact the enamel's surface properties or its chemical content.

RESUMO

The aim of this study was to evaluate the antimicrobial efficacy of non-thermal atmospheric plasma (NTAP) against Streptococcus mutans biofilms. Resin discs were fabricated, wet-polished, UV sterilized, and immersed in water for monomer extraction (37 °C, 24 h). Biofilms of bioluminescent S. mutans strain JM10 was grown on resin discs in anaerobic conditions for (37 °C, 24 h). Discs were divided into seven groups: control (CON), 2% chlorhexidine (CHX), only argon gas 150 s (ARG) and four NTAP treatments (30 s, 90 s, 120 s, 150 s). NTAP was applied using a plasma jet device. After treatment, biofilms were analyzed through the counting of viable colonies (CFU), bioluminescence assay (BL), scanning electron microscopy (SEM), and polymerase chain reaction (PCR). All NTAP-treated biofilm yielded a significant CFU reduction when compared to ARG and CON. BL values showed that NTAP treatment for 90 s, 120 s or 150 s resulted in statistically significantly lower metabolic activity when compared to the other groups. CHX displayed the lowest means of CFU and BL. SEM showed significant morphological changes in NTAP-treated biofilm. PCR indicated damage to the DNA structure after NTAP treatment. NTAP treatment was effective in lowering the viability and metabolism of S. mutans in a time-dependent manner, suggesting its use as an intraoral surface-decontamination strategy.

Assuntos

RESUMO

INTRODUCTION: Tooth whitening procedures are under continuous investigation to improve esthetic outcomes and reduce bleaching sensitivity (BS) precipitating from treatments. During the dental bleaching process it is known that the release of free radicals degrades the organic pigment molecules of the tooth and with this an amount of energy is released. Nonetheless, previous studies have never investigated the temporal correlation between of pH and electric potential (EP) generated in this treatment. OBJECTIVES: Therefore, the objective of the present study was to investigate temporal variations of pH and EP associated with three different commercially available bleaching gels and the correlation levels between parameters of interest to provide relevant information regarding the kinetics of oxidation reactions in dental bleaching procedures. METHODS: The study was divided into 3 groups (n = 9) in function of hydrogen peroxide concentration (either 6%, 15% and 35%). The temporal evolution of pH and EP values were determined using a highly-accurate and previously calibrated pH meter at specific time-points (5, 10, 15 and 30 min). RESULTS: Data obtained were submitted to one-way ANOVA of repeated measures with Bonferroni post-test (α = 0.05). The results of the study showed difference in the factor gel concentration (p < 0,0001), time (p < 0,0001) and interaction (gel/time) (p = 0.002) while throughout the intervals evaluated the groups remained relatively stable and without significant difference in the intragroup variation of pH (p < 0.05) and in EDP only with significant difference in the 5 min interval of the 35% concentration. A 2nd order polynomial relationship test showed high correlation levels. CONCLUSION: It can thus be concluded that there is a negative relationship between EP and pH variation in the different gel concentrations. CLINICAL SIGNIFICANCE: The findings of the present study suggest that bleaching gels of higher concentration may provoke BS that are more intense and durable due to significant electric depolarization of neuronal extensions of pulpal tissues.

RESUMO

The present pilot study had the objective to determine the effects of transcutaneous and transmucosal laser irradiation on arterial blood pressure (ABP), glucose (Glu) triglycerides (Tg), total cholesterol (Ch), high-density level cholesterol (HDL) and low-density cholesterol (LDL) immediately after treatment (T0) and after 30 (T30) and 60 (T60) days. Patients (n = 36) were selected and randomly distributed into 6 groups (n = 6/group; [G1] negative control, [G2] radial artery transcutaneous laser irradiation [G3] radial artery transcutaneous irradiation, [G4] transmucosal sublingual irradiation, [G5] transmucosal intra-nasal irradiation and [G6] extended radial artery transcutaneous irradiation). Blood exams were performed at T0, T30 and T60. Systolic and diastolic pressure results have indicated that patients' pressures ranged from 90 mmHg (P22, T30, G4) to 189 mmHg (P16, T0, G3) and 54 mmHg (P21, T60, G4) to 175 mmHg (P16, T30, G3). Levels of Glu at T30 and T60 varied from 5.53% (G1) to -5.78% (G6) and 1.21 (G2) to -8.69 (G6), respectively. Data was statistically assessed for normality and homogeneity of variances using the F-statistic and Bartlett's tests. Significant differences were determined using One-Way ANOVA and Fischer post hoc tests. Results indicated that treatments investigated can be safely used as an adjunct method to regulate blood pressure, glucose, triglycerides and cholesterol.

RESUMO

Previous reports demonstrated the utility of systemic application of growth hormone (GH) in the treatment of bone defects. Very few studies correlated bone repair efficacy with hepatic and renal side effects promoted by locally-delivered GH. The objectives of this study were to assess the bone repair properties along with hepatic and renal adverse effects promoted by local application of GH in a rat model. Thirty-two rats were randomly divided (4 groups; n = 8/group), as follows: (i) AB (autogenous bone + local application of saline solution [SS]), (ii) AB+ (autogenous bone + SS local application + SS irrigation), (iii) AB/GH+ (autogenous bone + SS local application + GH irrigation) and (iv) AB/GHL+ (autogenous bone + GH local application + GH irrigation). Critical-sized defects (diameter = 5.0 mm) were surgically created by a single operator in the calvaria of rats. Defects were filled with ground autogenous bone. Defects pertaining to AB+ and AB/GH+ received a mixture of autogenous bone and a SS-saturated (0.02 mL) collagen sponge covered with bovine cortical membrane. Defects in group AB/GHL+, were filled with the same biomaterials saturated with GH (0.02 mL). SS (0.1 mL) or GH (0.1 mL, equivalent to 0.4 IU) were applied locally on alternate days (8 weeks) in animals in groups AB, AB+ and AB/GH+ or AB/GHL+, respectively. Bone repair properties was determined in hematoxylin/eosin-stained slices using traditional histologic and histomorphometric techniques along with optical microscopy and digital image analysis. Statistical differences among groups was determined using Kruskal-Wallis and Tukey post hoc tests (α = 0.05). Histology results indicated that AB and AB+ displayed greater presence of autogenous bone as compared to AB/GH+ and AB/GHL+. Histomorphometric results indicated significantly higher osteoid matrix formation in AB and AB+ when compared to AB/GHL+ (p = 0.009). Kidneys and livers were found to have their glomeruli preserved in AB and AB+. Strong glomeruli necrosis and large areas of protein deposition were found in AB/GH+. Abnormal small-sized glomeruli were found in AB/GHL+. The utilization of autogenous bone graft associated with local application and irrigation with GH was shown to not improve the bone repair in calvarial critical-sized defects in a rat model.

RESUMO

Novel biomaterials capable of accelerating the healing process of skeletal tissues are urgently needed in dentistry. The present in vivo study assessed the osteoconductive and osteoinductive properties of experimental biphasic bioceramics (HA-TCP) modified or not by a nacre extract (marine organic extract, MOE) in a sheep model. Fabrication of MOE involved mixing ground nacre (0.05 g, particle sizes < 0.1 mm) with glacial ethanoic acid (5 mL, pH 7) for 72 hours using external magnetic stirring (25°C). Nonreactive carriers (sterile polythene tubes; 3/animal, radius: 2.5 mm, length: 10.0 mm) pertaining to the control (empty) or experimental groups (HA-TCP or MOE-modified HA-TCP) were implanted intramuscularly into the abdominal segment of the torso in sheep (n = 8, age: 2 years, weight: 45 kg). Euthanization of animals was performed at 3 and 6 months after surgery. Tissues harvested were subjected to macroscopic and radiographic assessments. Specimens were then stained for histological analysis. Both control and experimental animals were capable of inducing the neoformation of fibrous connective tissue at both time points where superior amounts of tissue formation and mineralization were detected for experimental groups (unaltered (at 3 and 6 mos) and MOE-modified HA-TCP (at 3 mos)). Histological results, however, revealed that mature bone formation was only observed for specimens fabricated with MOE-modified HA-TCP in a time-dependent manner. The present study has successfully demonstrated the in vivo utility of experimental biphasic bioceramics modified by MOE in an ectopic grafting sheep model. Promising osteoconductive and osteoinductive properties must be further developed and confirmed by subsequent research.

Assuntos

RESUMO

The objective of this systematic review was to compare the conical internal connection (IC) with the external hexagonal connection (EH) on the occurrence of marginal bone loss (ΔMBL). Different databases were used to carry out the selection of the elected studies. The studies were judged according to the risk of bias as "high", "low" and "unclear" risk. For the meta-analysis we included only studies that could extract the data of ΔMBL, survival rate (SR) and probing depth (PD). No statistically significant differences were found for ΔMBL data at one, three- and five-year survival rates between implant connections (p <0.05), however statistically significant differences were found for PD between EH and IC implants (1-year follow-up) -0.53 [95%CI -0.82 to -0.24, p = 0.0004]. This present systematic review demonstrated that there are no significant differences between IC and EH implants for both ΔMBL and SR at 1, 3 e 5 years after functional loading, although better PD values were observed for implants pertaining to the IC connections. Considering the high heterogeneity, more well-delineated, randomized clinical trials should be conducted.

Assuntos

RESUMO

Gingivitis is still considered a major risk factor for the occurrence and progression of periodontal disease. The aim of the present study was to compare the long-term (1, 12, and 18 weeks) antiplaque and antigingivitis efficacies of two commercially available toothpastes, Colgate Total® (CT) and BlueM® (BM), against attached supragingival dental plaque and gingival inflammation in an experimental gingivitis model. A parallel double-blinded randomized clinical trial including 39 dental students who refrained from all plaque control methods (manual or chemical) for 7 days was conducted. After the establishment of clinical gingivitis, participants were randomized into two experimental groups (CT and BM). Plaque index (PI) and gingival index (GI) were then calculated according to Turesky's modified Quigley and Hein index. Participants were assessed in four time periods (preclinical trial phase (W -1), gingivitis phase (W0), one week (W1), twelve weeks (W12), and eighteen weeks (W18)). Participants' stimulated saliva was collected and cultured (either aerobically or anaerobically, 37°C, 48 hours) in each time period (W -1, W0, W1, W12, and W18) for the count of viable colonies. Obtained data were analyzed using 2-way ANOVA and Tukey's test (α = 0.05). No significant differences were found (p > 0.05) between experimental groups at W -1. Significant differences between groups were observed at W0 (p < 0.05) for the parameter time period, but not for the interaction between parameters (time period ∗ toothpastes). Lower bacterial counts were observed in both groups after one week of toothbrushing; however, no significant differences were found between investigated dentifrices. Intra- and intergroup comparisons revealed that significant differences were not found (p > 0.05) between dentifrices at W1, W12, and W18 for both GI and PI. The present study demonstrated that toothpastes containing active oxygen and lactoferrin (BM) have comparable antiplaque and antigingivitis efficacies with triclosan-containing toothpastes (CT).

RESUMO

Abstract The objective of this systematic review was to compare the conical internal connection (IC) with the external hexagonal connection (EH) on the occurrence of marginal bone loss (ΔMBL). Different databases were used to carry out the selection of the elected studies. The studies were judged according to the risk of bias as "high", "low" and "unclear" risk. For the meta-analysis we included only studies that could extract the data of ΔMBL, survival rate (SR) and probing depth (PD). No statistically significant differences were found for ΔMBL data at one, three- and five-year survival rates between implant connections (p <0.05), however statistically significant differences were found for PD between EH and IC implants (1-year follow-up) -0.53 [95%CI -0.82 to -0.24, p = 0.0004]. This present systematic review demonstrated that there are no significant differences between IC and EH implants for both ΔMBL and SR at 1, 3 e 5 years after functional loading, although better PD values were observed for implants pertaining to the IC connections. Considering the high heterogeneity, more well-delineated, randomized clinical trials should be conducted.

Assuntos

RESUMO

BACKGROUND: Novel multifunctional biomaterials were recently designed to allow for an optimized tissue regeneration process. PURPOSE: To comprehensively assess (photographic, radiographic and histological) the in vivo functionality of demineralized bovine bone matrix (DBM) associated with an experimental marine organic extract (MOE) from nacre in a sheep ectopic grafting model. MATERIALS AND METHODS: Synthesis of MOE was based on mixing powdered nacre (0.05 g, particles average size <0.1 mm) with acetic acid (5 mL, pH 7) under constant stirring for 72 hours (25 °C). Polyethylene tubes (3/animal, n = 4, diameter: 5.0 mm × length: 10.0 mm) from the control (empty) or experimental groups (DBM or DBM + MOE) were then intramuscularly implanted into the lumbar regions of sheep (n = 8, 2-years old, ≈45 kg). Animals were euthanized at 3 and 6 months to allow for the collection of tissue samples. Tissue samples were fixed in formalin 10% (buffered, 7 days) in preparation for photographic, radiographic and histological assessments. Acquired images were then analyzed using digital image analysis software to quantify the amount of neoformed tissues, whereas radiographic and histological analyses were performed to determine radiopacity and classification of tissues deposited inside of the tubes. RESULTS: Photographic and radiographic analyses have shown that both pure (unaltered) and MOE-modified DBM were capable of depositing neoformed tissues (at 3 and 6 months), where higher levels of deposition and radiopacity were observed on groups treated with experimental materials. Histological results, however, demonstrated that tissues formed from both unaltered and MOE-modified DBM were only fibrous connective in origin. CONCLUSIONS: As an ectopic grafting in sheep, the experimental organo-biomaterial association applied did not reveal any osteoinductive property but led to a fibrous tissue repair only.

RESUMO

Novel endodontic revascularization techniques have been considered as alternative options for treatment of immature teeth affected by apical periodontitis. The continuous development of the root canal has been recognized as a major advantage of these techniques over traditional apexification approaches. This article reports a case in which endodontic revascularization using extracellular matrix proteins (EMPs) as a scaffold was utilized to treat an immature maxillary lateral incisor with history of trauma and chronic apical periodontitis. The root canal was accessed and sequentially irrigated with sodium hypochlorite (NaOCl) (2 mL, 5.25%), saline solution (10 mL), and gluconate chlorhexidine (10 mL, 0.12%). The root canal was then dried, filled with an antibiotic paste (ciprofloxacin, metronidazole, and minocycline), and sealed for 3 weeks. The antibiotic paste was then removed by irrigating the canal with NaOCl (10 mL, 5.25%). The intracanal scaffold was obtained by injecting a commercially available enamel EMP into the newly formed intracanal blood clot. Mineral trioxide aggregate was used to seal the scaffold in place, and a composite resin restoration was then placed using a universal restorative. At 3 and 72 months, clinical and radiographic analyses demonstrated short- and long-term success of the technique presented. The authors' findings indicate revascularization techniques are promising in the treatment of immature teeth with apical periodontitis. Longitudinal clinical trials are necessary to confirm the findings reported herein.

Assuntos

RESUMO

STATEMENT OF PROBLEM: Immediate placement and provisionalization of implants in fresh sockets has been previously demonstrated to be a predictable treatment in the restoration of non-recoverable teeth in the anterior regions of the maxilla. PURPOSE: This article reports a clinical case in which an immediate implant placement protocol was used in combination with two distinct and sequential grafts (bovine bone and connective tissue, respectively) followed by immediate implant provisionalization using the patient's crown of an extracted tooth. CLINICAL REPORT: Physical, clinical, and image examinations of the patient (female, 23 years old) revealed a maxillary central incisor (tooth No. 8) with slight mobility due the presence of extensive cervical resorption. The treatment proposed was the atraumatic extraction of the tooth followed by immediate implant placement and provisionalization. Two grafts (bovine bone and connective tissue) were used due to the presence of a very thin maxillary bone plate associated with a thin gingival biotype. RESULTS: The use of the extracted crown as a temporary crown after immediate implant placement resulted in immediate attainment of an esthetically pleasing outcome and long-term favorable results. CONCLUSION: The treatment protocol proposed can be efficiently used to immediately restore the patient's esthetics and function while maintaining the health, volume, and contours of gingival tissues over a 12-month follow-up period. CLINICAL IMPLICATIONS: Anterior teeth extractions typically require the execution of single-unit prostheses using dental materials of synthetic origin (such as polymers), which often are incapable of achieving the esthetic and physiological results patients expect. The use of the patient's own crown was demonstrated, which allowed good clinical results to be achieved and the natural shape and function of tissues to be maintained.

Assuntos

RESUMO

Silver phosphate is a semi-conductor sensitive to UV-Vis radiation (<530nm). Exposure to radiation removes electrons from the oxygen valence shell, which are scavenged by silver cations (Ag+), forming metallic silver (Ag0) nanoparticles. The possibility of silver nanoparticle formation in situ by a photoreduction process was the basis for the application of mixed calcium phosphate/silver phosphate particles as remineralizing and antibacterial fillers in resin-based dental materials. Mixed phosphate particles were synthesized, characterized and added to a dimethacrylate resin in 20% or 30% mass fractions to investigate their efficacy as ion-releasing fillers for dental remineralization and antibacterial activity. The formation of metallic silver nanoparticles after exposure to visible radiation from a dental curing unit (peak emission: 470nm) was demonstrated by particle X-ray diffraction and scanning electron microscopy analysis of the composite fractured surface. Calcium and phosphate release from materials containing the mixed particles were similar to those containing pure CaP particles, whereas Streptococcus mutans colonies were reduced by three orders of magnitude in relation to the control, which can be attributed to silver release. As expected, the optical properties of the materials containing mixed phosphate particles were compromised by the presence of silver. Nevertheless, materials containing mixed phosphate particles presented higher fracture strength and elastic modulus than those with pure CaP particles.

Assuntos

RESUMO

Although phlebotomine sand flies breeding sites have been identified and recorded by several studies, the microhabitats exploited by these insects remain little-known and hard to find. In this context, the difficulty of finding immature stages, and the limited number of taxonomic studies to identify immature stages of phlebotomine sand flies, are considered the major obstacles when attempting a complete inventory of Lutzomyia species. The objective of this study is to validate Cytochrome Oxidase I (Barcode region) as a marker for the identification of immature stages of Lutzomyia species recovered from natural breeding sites in Colombia. Among 142 collected sand flies, 18 immature individuals that did not complete their life cycle were identified to species level through sequencing of the COI gene. Values of K2P genetic distance between 0.002-0.031 allowed the identification of larvae at species level. The bootstrap support values (96%) in the Neighbor-Joining dendrogram were consistent for the majority of the established MOTUS of Lutzomyia atroclavata, Lutzomyia micropyga, Lutzomyia serrana, Lutzomyia cayennensis, Lutzomyia rangeliana, Lutzomyia shannoni and some species of the genus Brumptomyia. The COI gene is validated as a marker for the identification of immature stages of the genus Lutzomyia.

Assuntos

RESUMO

OBJECTIVE: The aim of this study was to investigate the effects of the antimicrobial photodynamic therapy (aPDT) using the association of curcumin with the surfactant sodium dodecyl sulfate (SDS) for oral decontamination in orthodontic patients. BACKGROUND DATA: The installation of the orthodontic appliances promotes an increase in the retentive area that is available for microbial aggregation and makes difficult the oral health promotion. However, aPDT is one possible approach that is used for the reduction of oral microbial load. MATERIALS AND METHODS: Twenty-four patients (n = 24) were randomly distributed into four groups: Light group: which was treated only with the blue light, no drug; PDT group, which was treated with curcumin and blue light; PDT + S group, which was treated with curcumin plus surfactant and irradiated with blue light; and Chlorhex group, which was treated with chlorhexidine. The photosensitizer agent was prepared by adding 0.1% of SDS to a curcumin solution of 1 g/L. Two distinct LED devices emitting blue light (450 ± 10 nm) were used as follows: extra-oral irradiation (200 mW, 80 mW/cm(2), 36 J and 14 J/cm(2)) and intra-oral irradiation (1200 mW, 472 mW/cm(2), 216 J and 85 J/cm(2)).The collection of nonstimulated saliva (n = 3; 3 mL/collection) was performed at the following steps: (1) immediately before swishing (curcumin, chlorhexidine, or water); (2) after swishing; and (3) after performing aPDT treatments. The colony-forming units (CFU) were counted visually, and the values were adjusted to CFU/mL. RESULTS: There was significant Log reduction for PDT (from 6.33 ± 0.92 to 5.78 ± 0.96, p < 0.05), PDT + S (from 5.44 ± 0.94 to 3.83 ± 0.71, p < 0.01), and Chlorhex (from 5.89 ± 0.97 to 2.55 ± 1.80, p < 0.01) groups. The survival rate was significantly reduced in both PDT + S and Chlorhex groups compared with all situations (p < 0.05). However, there was no significant difference between PDT + S and Chlorhex groups (p ≥ 0.05). CONCLUSIONS: These results indicate that when associated with the surfactant SDS, the aPDT can be used as an adjutant and a convenient agent to promote the oral decontamination in clinical practice.

Assuntos

RESUMO

OBJECTIVE: Evaluate the immediate and cumulative optical whitening efficacy of a blue covarine toothpaste. MATERIALS AND METHODS: 180 bovine tooth specimens with similar shade (ΔE < 3.5) were staining of different beverage: black tea(BT), green tea (GT), red wine (RW), orange soda (OS), and brazilian açai juice (AJ), and then submitted to tooth brushing with a blue covarine toothpaste (Op) or a control abrasive toothpaste (Ab). The whitening effect was evaluated at baseline (B), after staining (S), after 1 day (1D) and 7 days of cumulative use of toothpastes (7D). The color shade chances were assessment by Vita Easyshade reflectance spectroscope and the data of CIELab color coordinates (L*, a*, and b*), color difference (ΔE) and the whiteness index optimized (WIO), were analyzed by two-way mixed analysis of variance (ANOVA) for repeated measures and Bonferroni-corrected t-tests (α = 0.05). RESULTS: The analysis showed statistically significant differences before and after staining by colored beverages (p < 0.05), but no differences were found due to the action of toothpaste (p > 0.05), in the CIELab coordinates, ΔE and WIO index. CONCLUSIONS: The use of toothpastes (Op or Ab) reduced the dental staining caused by different colored beverage, but the whitening effect of blue covarine toothpaste could not be confirmed (p > 0.05).

Assuntos