RESUMO
Waste derived from the textile industry can contain a wide variety of pollutants of organic and inorganic natures, such as dyes (e.g., acid, basic, reactive, mordant dyes) and toxic metals (e.g., lead, chromium, cadmium). The presence of pollutants at high concentrations in textile waste makes them relevant sources of pollution in the environment. To solve this problem, various technologies have been developed for the removal of pollutants from these matrices. Thus, adsorption emerges as an efficient alternative for textile waste remediation, providing advantages as simplicity of operation, economy, possibility of using different adsorbent materials, and developing on-line systems that allow the reuse of the adsorbent during several adsorption/desorption cycles. This review will initially propose an introduction to the adsorption world, its fundamentals, and aspects related to kinetics, equilibrium, and thermodynamics. The possible mechanisms through which a pollutant can be retained on an adsorbent will be explained. The analytical techniques that offer valuable information to characterize the solid phases as well as each adsorbate/adsorbent system will be also commented. The most common synthesis techniques to obtain carbon nano-adsorbents have been also presented. In addition, the latest advances about the use of these adsorbents for the removal of pollutants from textile waste will be presented and discussed. The contributions reported in this manuscript demonstrated the use of highly efficient carbon-based nano-adsorbents for the removal of both organic and inorganic pollutants, reaching removal percentages from 65 to 100%.
Assuntos
Poluentes Ambientais , Nanoestruturas , Poluentes Químicos da Água , Águas Residuárias , Carbono , Poluentes Químicos da Água/análise , Corantes , Adsorção , Indústria TêxtilRESUMO
In the present work, Iridaea cordata (IC), a red marine macroalgae, was used as an efficient biosorbent for the removal of crystal violet (CV) and methylene blue (MB) dyes from aqueous solutions. The effects of pH (5, 7, and 9) and IC concentration (1, 3, and 5 g L-1) on the biosorption were studied through a 32 full factorial design. Under the optimal conditions (pH: 7, biosorbent concentration: 1 g L-1), biosorption kinetic studies were developed and the obtained experimental data were evaluated by pseudo-first order and pseudo-second order models. The results showed that the pseudo-second order model was in agreement with the experimental kinetic data for both dyes. Equilibrium studies were also carried out, and results exhibited good concordance with the Brunauer-Emmett-Teller isotherm. The biosorption capacities were 36.5 and 45.0 mg g-1 for CV and MB dyes, respectively. The dye removal percentages were around 75% for CV and 90% for MB. Thermodynamically, the biosorption process proved to be exothermic, spontaneous, and favorable. These results showed that IC biomass is a promising biosorbent for removal of CV and MB dyes from aqueous solutions.