RESUMO

This study aimed to evaluate the internal adaptation of three different computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic crowns. The internal adaptation of a polymer-infiltrated ceramic network material (Vita Enamic [VE]) was compared to two machinable glass-ceramics; Zirconia-reinforced lithium silicate (Vita Suprinity [VS]) and a lithium disilicate glass-ceramic (IPS e.max. CAD). Thirty human premolars of average size were prepared (n=10 each group) by computer numerical control to fulfill the criteria of all-ceramic crown design. Optical impressions were taken for each tooth preparation using the CAD/CAM scanner. Thirty crowns were fabricated using CAD/CAM system and divided into three groups (IPS e.max, VE, and VS). To assess the internal fit of tested crowns, the gap between the intaglio of each crown and the corresponding tooth surface was evaluated using a 3D digital scanner using the Triple-scan Protocol. One-way ANOVA followed by Tukey Post Hoc statistical tests were used to statistically analyze results of the internal fit. There was a statistically significant difference for all groups at the four axial walls (p = 0.000002). For total internal fit between groups, comparisons showed a statistically significant difference between all tested groups (p=0.000002). When each pair of groups was statistically compared with each other, all pair comparisons showed a statistically significant difference. IPS e.max CAD had the best internal fit, followed by Vita Enamic, then Vita Suprinity. For all ceramics tested, values of internal fit of all ceramics tested were within the clinically acceptable range.

Assuntos

RESUMO

Abstract This study aimed to evaluate the internal adaptation of three different computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic crowns. The internal adaptation of a polymer-infiltrated ceramic network material (Vita Enamic [VE]) was compared to two machinable glass-ceramics; Zirconia-reinforced lithium silicate (Vita Suprinity [VS]) and a lithium disilicate glass-ceramic (IPS e.max. CAD). Thirty human premolars of average size were prepared (n=10 each group) by computer numerical control to fulfill the criteria of all-ceramic crown design. Optical impressions were taken for each tooth preparation using the CAD/CAM scanner. Thirty crowns were fabricated using CAD/CAM system and divided into three groups (IPS e.max, VE, and VS). To assess the internal fit of tested crowns, the gap between the intaglio of each crown and the corresponding tooth surface was evaluated using a 3D digital scanner using the Triple-scan Protocol. One-way ANOVA followed by Tukey Post Hoc statistical tests were used to statistically analyze results of the internal fit. There was a statistically significant difference for all groups at the four axial walls (p = 0.000002). For total internal fit between groups, comparisons showed a statistically significant difference between all tested groups (p=0.000002). When each pair of groups was statistically compared with each other, all pair comparisons showed a statistically significant difference. IPS e.max CAD had the best internal fit, followed by Vita Enamic, then Vita Suprinity. For all ceramics tested, values of internal fit of all ceramics tested were within the clinically acceptable range.

Resumo Este estudo teve como objetivo avaliar a adaptação interna de três diferentes coroas cerâmicas CAD/CAM (Computer-aided design/computer-aided manufacturing). A adaptação interna de um material cerâmico de rede com infiltração de polímero (Vita Enamic [VE]) foi comparada com duas cerâmicas de vidro maquináveis; silicato de lítio reforçado com zircónio (Vita Suprinity [VS]) e uma cerâmica-vidro de dissilicato de lítio (IPS e.max. CAD). Trinta dentes pré-molares humanos de tamanho médio foram preparados (n=10 cada grupo) por controle numérico computadorizado para preencher os critérios de desenho de coroa em cerâmica pura. Foram tiradas impressões ópticas para cada preparação dentária utilizando o scanner CAD/CAM. Trinta coroas foram fabricadas usando o sistema CAD/CAM e divididas em três grupos (IPS e.max, VE, e VS). Para avaliar o ajuste interno das coroas testadas, o espaço entre o entalhe de cada coroa e a superfície dentária correspondente foi avaliado usando um scanner digital 3D usando o Protocolo Triple-scan. Para analisar estatisticamente os resultados do ajuste interno, utilizou-se a ANOVA unidirecional seguida dos testes estatísticos Tukey Post Hoc. Houve uma diferença estatisticamente significativa para todos os grupos nas quatro paredes axiais (p = 0,000002). Para o ajuste interno total entre grupos, as comparações mostraram uma diferença estatisticamente significativa entre todos os grupos testados (p=0,000002). Quando cada par de grupos foi comparado estatisticamente uns com os outros, todas as comparações de pares mostraram uma diferença estatisticamente significativa. IPS e.max CAD teve o melhor ajuste interno, seguido por Vita Enamic, depois Vita Suprinity. Para todas as cerâmicas testadas, os valores de ajuste interno de todas as cerâmicas testadas encontravam-se dentro da gama clinicamente aceitável.