RESUMO
The addition of Superabsorbent Polymer (SAP) decreases the effect of autogenous shrinkage present in pastes, mortars, and concretes. In this study we investigated the influence of the addition of SAP in self-compacting cement paste mixtures. Eighteen 5 × 10 cylindrical specimens were molded in all, three for each mixture (CPII base, CPII 0.15%SAP/600µm, CPII 0.15%SAP/800 µm, CPV base, CPV 0.15%SAP/600 µm, CPV 0.15%SAP/800 µm). Two types of cement were tested, CP II-Z and CP V-ARI with 0.15% of weight replaced per two diameters of SAP (600 µm and 800 µm). The samples followed the standards required. Mini slump tests were carried out in the fresh state, and uniaxial compressive strength, elastic modulus, specific mass, absorption, and air content in the hardened state after 28 days. The results obtained show the SAP is high indicated to replaced cement in small % of weight i/to fresh and hardened paste. Likewise, the group mix n° 3 composed of CPII 0.15% of SAP with 800 µm diameter presented the best result.
RESUMO
The reuse of waste in civil construction brings environmental and economic benefits. However, for these to be used in concrete, it is necessary a previous evaluation of their physical and chemical characteristics. Thus, this study aimed to characterize and analyze the waste foundry exhaust sand (WFES) for use in self-compacting concrete (SCC). Foundry exhaust sand originates from the manufacturing process of sand molds and during demolding of metal parts. It is a fine sand rich in silica in the form of quartz collected by baghouse filter. Characterization of WFES was conducted through laser granulometry, scanning electron microscopy (SEM) in the energy dispersive spectroscopy (EDS) mode, X-ray diffraction (XRD), X-ray fluorescence (XRF), Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG) and derivative thermogravimetry (DTG) techniques. The waste was classified as non-hazardous and non-inert, with physical and chemical properties suitable for use in SCC composition, as fine aggregate or mineral addition. Five mixtures of SCC were developed, in order to determine the waste influence in both fresh and hardened concrete. The properties in the fresh state were reached. There was an increase in compressive strength and sulfate resistance, a decrease in water absorption of self-compacting concrete by incorporating WFES as 30% replacement.
RESUMO
The correct destination of waste is an essential factor for sustainable development. Electronic waste, which is very toxic, is the type of waste with the highest rate of increase in its generation. For these reasons, the amount of research on this topic increases year by year, as shown by the literature review carried out by this study. This review aims to identify the main characteristics and proposals of the main study on electronic waste and verify how Brazil is inserted globally in the research on e-waste. Another objective is to suggest a path for researchers who want to start research on e-waste by identifying the keywords most used in the analyzed articles. The results evidenced that the most published countries on the subject are China, the USA, and India. Brazil is in a position of little prominence concerning its research production on the subject. Most of the central studies we analyzed use case study and literature review as the research method. Among the 44 articles analyzed, only one proposed a destination for e-waste. It highlights the need for more research focusing on the environmentally correct destination of e-waste. A good way to start a search on electronic waste is to use the keywords identified in this study, especially those used most frequently in the analyzed articles.