RESUMO
OBJECTIVES: This in vitro study aimed to assess the impact of incorporating calcium glycerophosphate (CaGP) and sodium fluoride (NaF) in addition to 35% hydrogen peroxide concerning the enamel mechanical and morphological properties. METHODS: Specimens of bovine enamel were chosen based on their initial surface hardness (SHi) and subsequently divided into five gel groups (n=12): 1) 35% Hydrogen Peroxide (HP) Gel; 2) HP + 0.1% NaF Gel (HP/NaF); 3) HP + 0.25% CaGP Gel (HP/CaGP); 4) HP + 0.1% NaF + 0.25% CaGP Gel (HP/NaF/CaGP) and 5) HP Blue 35% Gel (HP Blue). The bleaching gels were applied thrice, for 40 min, at intervals of 7 days each. After 21 days, the final surface hardness (SHf), integrated hardness (IH), Polydispersity Index (PdI) and Zeta Potential (Zp), surface roughness (Ra, after and before), and surface/structural analysis by Scanning Electron Microscopy (SEM) were determined. The data were submitted to ANOVA (one-way and two-way) followed by the Student-Newman-Keuls test (α=0.05). RESULTS: The addition of NaF to HP reduced demineralization by 11.5% in relation to HP (p<0.05). The NaF/CaGP association reduction is 22.8 and 20% higher in comparison to HP/NaF/CaGP and HP Blue, respectively. The IH when the PH/NaF/CaGP bleaching gel was applied, was 14% higher compared to HP and HP Blue groups. CONCLUSIONS: It can be concluded that the association of NaF and CaGP with the 35% hydrogen peroxide gel (HP/NaF/CaGP) significantly changed tooth enamel demineralization in terms of surface, depth, roughness, and enamel morphology.
Assuntos
Esmalte Dentário , Peróxido de Hidrogênio , Fluoreto de Sódio , Clareadores Dentários , Esmalte Dentário/efeitos dos fármacos , Bovinos , Animais , Fosfatos , Microscopia Eletrônica de Varredura , Propriedades de Superfície , Dureza , Clareamento Dental/métodos , Técnicas In VitroRESUMO
This study aimed to evaluate the influence of different dye substances on the effectiveness of bleaching and hydrogen peroxide diffusion (HO). From 300 central bovine incisors, 160 enamel/dentin disks with similar E* values were selected. The specimens were distributed according to the pigment treatment. Aiming to standardize the chromatic change provided by the different pigments, the specimens from each group remained immersed in the pigment solutions for different times (32 specimens per group): DW - distilled water (Control group); BT - black tea; CO - coffee; SD - cola-based soft drink; and RW - red wine. After pigmentation and chromatic change value analysis, only 10 specimens from each group (n=10) were selected, so the chromatic alteration of all groups was similar (ΔE=8.36±0.5). The samples were subjected to bleaching treatment and diffused peroxide was quantified in a visible ultraviolet light spectrophotometer. Two more bleaching sessions were conducted to evaluate ΔE and the Whiteness Index for Dentistry (ΔWID). Concurrently, solutions were prepared with dye agents, and the same ΔE value was obtained in the teeth (ΔE=8.49±0.5). The solutions received a standardized amount of H2O2, being analyzed by a visible ultraviolet light spectrophotometer. Data analysis comprised variance and Tukey's tests (α=0.05). Higher H2O2 diffusion was observed in pigmented groups when compared with DW (p<0.05). The CO and RW groups had the highest ΔE values (p>0.05), meaning greater difficulty in responding to treatment. In relation to ΔWID, RW bleached less than the other groups after the third bleaching session (p<0.05), resembling only the SD group (p=0.467). However, 21 days after ending the bleaching treatment, only RW and CO had the lowest values (p=0.481). Analysis of the solutions revealed that only RW was altered by the peroxide (p<0.05). In conclusion, teeth pigmented with coffee and, mainly, red wine were more resistant to bleaching treatment, although all pigmentations favored increases in transenamel and transdentinal H2O2 penetration.
Assuntos
Clareadores Dentários , Clareamento Dental , Bovinos , Animais , Peróxido de Hidrogênio , Clareadores Dentários/farmacologia , Café , PeróxidosRESUMO
BACKGROUND: Photodynamic therapy (PDT) has shown satisfactory antibacterial effects. However, little information regarding the cytotoxicity potential of PDT using curcumin as a photosensitizer (PS) on fibroblasts are found. The aim of this in vitro study was to evaluate the cytotoxicity of root canal irrigating solutions and photodynamic therapy with curcumin PS on the L-929 cell line. METHODS: Healthy mouse skin fibroblast cells were distributed into the following 7 experimental groups: G1 - culture medium DMEM (control group); G2 - 0.9% sodium chloride; G3 - 2.5% sodium hypochlorite (NaOCl); G4 - 5% NaOCl; G5 - PDT with curcumin PS at 500 mg/L + blue LED; G6 - PDT with curcumin PS at 750 mg/L + blue LED; and G7 - PDT with curcumin PS at 1000 mg/L + blue LED. All experimental groups which underwent PDT action were submitted to blue LED for 4 min, with a wavelength of 480 nm and energy fluency of 75 J/cm². The cultures were maintained under standard cell culture conditions (37°C, 100% humidity, 5% CO2). Cell viability analysis was performed using the colorimetric method to evaluate the periods of 6, 24, and 48 h. Data were subjected to the Kruskal-Wallis test, followed by the Dunn test to compare groups and Friedman test to compare periods (α = 0.05). RESULTS: When comparing the periods, no significant differences were observed for any of the experimental groups analyzed (p > 0.05), except for the NaOCl2.5 group that exhibited higher cell viability at 6 h compared to the period of 48 h (p = 0.0489). In the comparisons of the experimental groups, there were no statistically significant differences between the control group compared to all disinfection protocols, regardless of the period evaluated (p > 0.05), except for the PDT + C1000 group that showed lower cell viability (P < 0.05). CONCLUSIONS: PDT with curcumin at 1000 mg/L was cytotoxic on L-929 fibroblast cell culture. However, laser-activated curcumin at a concentration of 500 mg/L presented no influence on L-929 fibroblast cell viability in in vitro conditions.
Assuntos
Curcumina , Fotoquimioterapia , Animais , Curcumina/farmacologia , Cavidade Pulpar , Camundongos , Fotoquimioterapia/métodos , Fármacos Fotossensibilizantes/farmacologia , Fármacos Fotossensibilizantes/uso terapêutico , Irrigantes do Canal Radicular/farmacologia , Irrigantes do Canal Radicular/uso terapêutico , Hipoclorito de Sódio/farmacologiaRESUMO
This study aimed to evaluate the effect of the bleaching gel application site on chromatic changes and postoperative sensitivity in teeth. Thirty patients were selected and allocated to three groups (n=10 per group), according to the location of the gel: GI, cervical application; GII, incisal application; and GIII, total facial. The amount and time of application of the 35% hydrogen peroxide (H2O2) gel were standardized. Color changes were analyzed by ΔE and Wid (bleaching index), using the values obtained in the readings conducted on a digital spectrophotometer in the cervical (CRs) and incisal regions (IRs) of the teeth. Spontaneous sensitivity was assessed using the questionnaire, and the stimulated sensitivity caused by the thermosensory analysis (TSA). The analysis occurred in five stages: baseline, after the first, second, and third whitening sessions (S), and 14 days after the end of the whitening, using the linear regression statistical model with mixed effects and post-test by orthogonal contrasts (p<0.05). Although the IR was momentarily favored, at the end of the treatment, the restriction of the application site provided results similar to those obtained when the gel was applied over the entire facial surface. Regarding sensitivity, only the GI showed spontaneous sensitivity. In the TSA, GIII had less influence on the threshold of the thermal sensation. It was concluded that the chromatic alteration does not depend on the gel application site. Spontaneous sensitivity is greater when the gel is concentrated in the cervical region (CR), and the teeth remain sensitized by thermal stimuli even after 14 days.
Assuntos
Sensibilidade da Dentina , Clareadores Dentários , Clareamento Dental , Dente , Cor , Sensibilidade da Dentina/induzido quimicamente , Sensibilidade da Dentina/tratamento farmacológico , Humanos , Peróxido de Hidrogênio/uso terapêutico , Espectrofotometria , Clareamento Dental/efeitos adversos , Clareamento Dental/métodos , Clareadores Dentários/uso terapêutico , Resultado do TratamentoRESUMO
The objective was to investigate effects of progesterone (P4) dose on abundance of luteinizing hormone receptor (LHCGR), aromatase (CYP19A1), 3ß-hydroxysteroid dehydrogenase (HSD3B1), and other steroidogenic mRNA transcripts in granulosa cells from dominant follicles. Nellore heifers were assigned to one of six groups: new, first-use controlled internal drug release device (CIDR1) inserted for 5 days (Large-P4-dose-D5; n = 7) or 6 days (Large-P4-dose-D6; n = 8), prostaglandin (PG)F2α administered on D0 and 1 previously-used CIDR (CIDR3) inserted for 5 days (Small- P4-dose-D5; n = 8) or 6 days (Small-P4-dose-D6; n = 8), CIDR1 inserted on D0 and removed plus PGF2α on D5 (Large-P4-dose-proestrus (PE); n = 7), and CIDR3 and PGF2α on D0 and 1, CIDR3 removed plus PGF2α on D5 (Small-P4-dose-PE; n = 7). Duration of P4 treatment (D5 compared to D6) affected abundances of CYP19A1 mRNA transcripts, with there being greater abundances on D6 than D5 (P ≤ 0.05). Heifers treated with the large dose of P4 had a smaller dominant follicle, less serum and intra-follicular estradiol (E2) concentrations (P ≤ 0.05) and lesser LHCGR, CYP19A1, and HSD3B1 transcript abundances (P ≤ 0.05). Heifers treated to induce PE had a larger follicle diameter (P = 0.09), greater intra-follicular E2 concentrations and larger abundances of CYP19A1 mRNA transcript (P ≤ 0.05) than heifers of the D6 group. Overall, treatment with larger doses of P4 resulted in lesser abundances of LHCGR, HSD3B1, and CYP19A1 mRNA transcripts; thus, potentially leading to development of smaller dominant follicles and lesser E2 concentrations.
Assuntos
Bovinos , Sincronização do Estro/efeitos dos fármacos , Progesterona/farmacologia , Receptores do LH/metabolismo , Animais , Aromatase/genética , Aromatase/metabolismo , Enzima de Clivagem da Cadeia Lateral do Colesterol/genética , Enzima de Clivagem da Cadeia Lateral do Colesterol/metabolismo , Dinoprosta/administração & dosagem , Dinoprosta/análogos & derivados , Dinoprosta/farmacologia , Estradiol/administração & dosagem , Estradiol/análogos & derivados , Estradiol/farmacologia , Feminino , Regulação da Expressão Gênica/efeitos dos fármacos , Células da Granulosa/efeitos dos fármacos , Complexos Multienzimáticos/genética , Complexos Multienzimáticos/metabolismo , Fosfoproteínas/genética , Fosfoproteínas/metabolismo , Progesterona/administração & dosagem , Progesterona Redutase/genética , Progesterona Redutase/metabolismo , Receptores do LH/genética , Esteroide Isomerases/genética , Esteroide Isomerases/metabolismoRESUMO
PURPOSE: To evaluate the microhardness, roughness, profilometry and cross-sectional hardness of single increment materials submitted to different challenges. METHODS: Thirty-six disks of each material, Filtek Supreme XTE (FT), Filtek One Bulk Fill (BK), Ketac Molar Easy Mix (KT) and Equia Forte + Coat (EQ) were immersed in saliva, pH cycling and Coke for 15 days. Half of each surface was used as its own control. Superficial microhardness, roughness, perfilometry analysis were performed. All samples were sectioned, embedded in acrylic resins, polished and cross-sectional hardness were made. Data were analyzed by ANOVA and Tukey's test (p < 0.05). RESULTS: The KT presented superficial microhardness superior than EQ. However, in depth, EQ showed superior values. FT, KT suffered the effects of challenges on microhardness values. The highest roughness and wear values were found for KT. RC do not suffer wear. All materials suffered the effects of Coke and pH challenges in depths 10 µm and 60 µm. CONCLUSION: The single increment restorative material that suffered less action on its surface was the bulk-fill resin. The coat present in the hybrid ionomer was able to resist to the immersion actions. In addition, Coke was the most aggressive challenge.
Assuntos
Resinas Compostas , Materiais Dentários , Resinas Acrílicas , Estudos Transversais , Cimentos de Ionômeros de Vidro , Dureza , Humanos , Teste de Materiais , Propriedades de SuperfícieRESUMO
This in vitro study evaluated the effect of the application and previous photoactivation of bonding adhesives in lithium disilicate ceramics. This was achieved by analyzing the bond strength of the cement-ceramic interface, nanohardness and elastic modulus of bonding adhesives and resin cements. The bonding adhesives used were Scotchbond Multi-Purpose (SBMP); Scotchbond Multi-Purpose light-cured (SBMP+LC); Single Bond 2 (SB2); Single Bond 2 light-cured (SB2+LC); Single Bond Universal (SBU) and Single Bond Universal light-cured (SBU+LC). After luting the ceramic in composite resin blocks, all specimens were subjected to 10,000 thermocycles. Sticks were obtained for the microtensile bonding strength test and the nanohardness and elastic modulus of the bonding adhesive and resin cements. Data were submitted to one-way ANOVA and Fishers tests (α =0.05). The results indicated that the bonding strength and mechanical properties were influenced by the interaction of the bonding adhesive and resin cement. For the mechanical properties analyzed, no statistically significant differences were observed between the groups. Single Bond Universal was the only system that was effective with or without previous light activation. For the other adhesive systems, Scotchbond Multi- Purpose and Single Bond 2, the previous light activation was necessary to optimize the bonding strength of the adhesive interface.
Assuntos
Colagem Dentária , Cerâmica , Coroas , Lâmpadas de Polimerização Dentária , Cimentos Dentários , Porcelana Dentária , Teste de Materiais , Cimentos de Resina , Resistência à TraçãoRESUMO
Conditions of the acrylic resin (AR) surface, such as roughness, can promote a favourable environment for the adhesion of micro-organisms, even on the surface of ocular prostheses. This study evaluated the influence of photopolymerized glaze application on the roughness of ARs and adhesion of Staphylococcus aureus and Staphylococcus epidermidis on ocular AR surfaces submitted to accelerated ageing. Two hundred and eighty-eight samples of white colour (N1) and colourless ARs were distributed in eight groups (n = 9), based on surface treatments (glaze or ARs submitted to only a final polishing), accelerated ageing (before and after) and periods of microbial growth (24- and 48-h). The roughness average (Ra) and total height of roughness profile (Rt) values were greater for the groups with glaze and increased for all groups after ageing. The microbial adhesion among the groups with and without glaze did not present a statistically significant difference. The ageing did not statistically affect the adhesion of Staph. epidermidis, but affected the adhesion of Staph. aureus, which presented an increase after 24 h of growth on only N1 AR with glaze. These results demonstrate that the glaze did not contribute to adhesion of Staph. aureus and Staph. epidermidis, which are responsible for most ocular prosthetic infections. SIGNIFICANCE AND IMPACT OF THE STUDY: Some recent evidence suggested that the surface finish of ocular prostheses influences the accumulation of deposits that can affect the interaction with pathogenic bacteria, increasing the probability of infections. In addition, surface deterioration over time can increase the roughness and, consequently, biofilm formation. Thus, a better understanding of the influence of surface finish on bacterial adhesion becomes extremely important. In this study, we tested a glaze for surface polishing compared to mechanical polishing, before and after ageing. The results suggest that the glaze did not contribute to microbial adhesion and might be useful in preventing possible prosthetic infections.
Assuntos
Resinas Acrílicas/química , Aderência Bacteriana/fisiologia , Olho Artificial/microbiologia , Staphylococcus aureus/metabolismo , Staphylococcus epidermidis/metabolismo , Propriedades de SuperfícieRESUMO
This study evaluated the microhardness and histomorphology of bovine enamel when 35% hydrogen peroxide is used. A total of 44 specimens were adapted to removable devices used by 11 individuals subjected to dental caries challenge. A decrease in microhardness was observed for all groups after the cariogenic challenge. Microscopic analysis revealed that fragments subjected to cariogenic challenge associated with bleaching had more intense superficial histologic changes, but the depth of the lesions remained unchanged. It was concluded that 35% hydrogen peroxide enhanced the reduction in hardness and histomorphologic changes in the enamel surface exposed to cariogenic challenge.
Assuntos
Esmalte Dentário/efeitos dos fármacos , Peróxido de Hidrogênio/farmacologia , Clareadores Dentários/farmacologia , Desmineralização do Dente/fisiopatologia , Adulto , Animais , Biofilmes , Cariogênicos/farmacologia , Bovinos , Cárie Dentária/patologia , Cárie Dentária/fisiopatologia , Esmalte Dentário/patologia , Dureza , Humanos , Microscopia Eletrônica de Varredura , Microscopia de Polarização , Sacarose/farmacologia , Desmineralização do Dente/patologia , Adulto JovemRESUMO
The aim of this study was to evaluate the effect of different acidic solutions on the microhardness and surface roughness of restorative materials. The 120 specimens of restorative materials (Fuji II LC, Vitremer, Supreme XT, and Supreme XT + Biscover LV) were randomly divided into three groups according to the immersion media: hydrochloric acid, soft drink, or distilled water. Over a period of five weeks, the groups were immersed in the solutions, which were changed weekly. Data were tested using analysis of variance and the Fisher protected least significant difference test (p<0.05). The results showed that the glass ionomer materials showed the highest surface roughness values (Fuji II LC: 0.111 ± 0.014 µm before and 0.139 ± 0.016 µm after immersion; Vitremer: 0.177 ± 0.012 µm before and 0.084 ± 0.012 µm after immersion), whereas the lowest values were found for the resin sealed with Biscover LV before (0.047 ± 0.011 µm) and after exposure in distilled water (0.043 ± 0.007 µm), soft drink (0.040 ± 0.005 µm), and hydrochloric acid (0.045 ± 0.005 µm). The Supreme XT showed the highest microhardness values before (44.96 ± 2.51 KHN) and after the aging process (41.26 ± 1.22 KHN in water, 35.96 ± 0.81 KHN in soft drink, and 34.74 ± 0.97 KHN in HCl), with significant differences from the other materials (p<0.0001). The lowest microhardness values were found for glass ionomer materials. The solutions used in this study decreased the microhardness of all studied materials, whereas the sealed surface suffered minor changes in microhardness and surface roughness after exposure to acidic solutions.
Assuntos
Bebidas Gaseificadas , Resinas Compostas , Cimentos de Ionômeros de Vidro , Ácido Clorídrico , Restauração Dentária Permanente , Dureza , Concentração de Íons de Hidrogênio , Teste de Materiais , Distribuição Aleatória , Cimentos de Resina , Propriedades de SuperfícieRESUMO
The effect of biomodification of dentin matrices using collagen cross-linkers, glutaraldehyde (GD) and grape seed extract (GSE), on the reduced modulus of elasticity (Er) and nanohardness (H) of the hybrid layer and underlying dentin was investigated at the dentin-resin bonded interface. The coronal dentin of nine molars were exposed and divided into groups: 5% GD, 6·5% GSE and control. Control samples were etched, bonded with Adper Single Bond Plus and Premise composite. GD and GSE were applied for 1 h prior to bonding procedures. After 24 h, samples were sectioned, and resin-dentin beams were either kept in distilled water or exposed to collagenase treatment for 24 h. Nano-indentations were performed at the hybrid layer and underlying dentin. GD and GSE treatment increased the Er and H of resin-dentin interface structures when compared to the control group (P<0·05), particularly the hybrid layer, and may be a promising novel approach to strengthen the dentin-resin bonded interface structures when using these adhesive system and resin-based composite.