RESUMO
Yeast biomass from ethanol industry (YB) was evaluated as a biosorbent to 17α-ethinylestradiol (EE) alone and along with estrone (EST). This material is rich in sorption sites and has a good cost-benefit ratio, since it is an industrial residue largely produced (around 30 g for each liter of ethanol). A 2k-factorial design was carried out to evaluate the sorption capacity of YB for EE considering the variables pH, biosorbent dose (BD), and ionic strength (IS), at two hormone concentration (HC) levels. The best conditions assessed for individual EE adsorption (pH = 10, IS = 0.1 mol/L, and BD = 0.5 mg/L) were also established for adsorption carried out in the presence of EST. Individuals EE and EST experimental sorption capacities (SCexp) were, respectively, 24.50 ± 0.07 and 0.80 ± 0.07 mg/g, fairly similar to Qmax (EE, 21.41 ± 1.27 mg/g; EST, 0.93 ± 0.075 mg/g) from Langmuir model. The Freundlich model best fitted the experimental data for EE adsorption (r2 = 0.9925; χ2 = 0.5575). The study carried out in the presence of EST showed an associative/competitive sorption process between EE and EST, which may be explained by their similar chemical structures and organic carbon-water partition coefficients Koc.
Assuntos
Estrona/química , Etinilestradiol/metabolismo , Saccharomyces cerevisiae/química , Adsorção , Biomassa , Estrona/metabolismo , Etanol/química , Etinilestradiol/química , Concentração de Íons de Hidrogênio , Cinética , Concentração Osmolar , TermodinâmicaRESUMO
Sugarcane bagasse and hydroponic lettuce roots were used as biosorbents for Cu(II), Fe(II), Zn(II), and Mn(II) removal from monoelemental solutions in aqueous medium, at pH 5.5, using batch procedures. These biomasses were studied in natura (lettuce roots, NLR, and sugarcane bagasse, NSB) and modified with HNO3 (lettuce roots, MLR, and sugarcane bagasse, MSB). Langmuir, Freundlich, and Dubinin-Radushkevich non-linear isotherm models were used to evaluate the data from the metal ion adsorption assessment. The maximum adsorption capacities (qmax) in monoelemental solution, calculated using the Langmuir isothermal model for Cu(II), Fe(II), Zn(II), and Mn(II), were respectively 24.61, 2.64, 23.04, and 5.92 mg/g for NLR; 2.29, 16.89, 1.97, and 2.88 mg/g for MLR; 0.81, 0.06, 0.83, and 0.46 mg/g for NSB; and 1.35, 2.89, 20.76, and 1.56 mg/g for MSB. The Freundlich n parameter indicated that the adsorption process was favorable for Cu(II) uptake by NLR; Fe(II) retention by MLR and MSB; and Zn(II) sorption by NSB, MLR, and NSB and favorable for all biomasses in the accumulation of Mn(II). The Dubinin-Radushkevich isotherm was applied to estimate the energy (E) and type of adsorption process involved, which was found to be a physical one between analytes and adsorbents. Organic groups such as O-H, C-O-C, CH, and C=O were found in the characterization of the biomass by FTIR. In the determination of the biomass surface charges by using blue methylene and red amaranth dyes, there was a predominance of negative charges.