RESUMO
OBJECTIVE: The aim of this study was to compare the photobleaching rate of CQ in different dental resins. METHODS: The photodecomposition rate of CQ/amine system in bis-GMA/TEGDMA, bis-EMA and UDMA polymerizing monomers was evaluated at different light intensities. The photobleaching of the CQ was studied by monitoring the decrease in light absorption as a function of continuous irradiation time. The absorption changes were assessed by recording the transmitted light that passed through samples of monomers containing CQ/amine. RESULTS: Complete photobleaching of CQ was observed in all the monomer tested and the rate constant for the photobleaching was proportional to the radiation intensity. Hydrogen abstraction from amines by the excited CQ state via electron transfer and direct hydrogen abstraction from monomer structures were involved in the CQ photoreduction. CQ was photobleached in the absence of coinitiator in a dimethacrylate monomer containing a carbamate functional group (UDMA). This behavior was attributed to the presence of labile hydrogen atoms in the UDMA monomer. The CQ photobleaching rate constant in UDMA containing CQ/amine was similar to that in UDMA in the absence of amine. Moreover, the efficiency of CQ to photoinitiate the polymerization of UDMA in the absence of amine demonstrated that the radicals derived from the UDMA monomer via hydrogen abstraction are highly reactive toward double bonds. SIGNIFICANCE: CQ photoinitiates the polymerization of the UDMA monomer in the absence of amine and the efficiency of this process is comparable to that of traditional bis-GMA and bis-EMA monomers activated with CQ/amine.
Assuntos
Resinas Compostas/química , Materiais Dentários/química , Metacrilatos/química , Terpenos/efeitos da radiação , Ácido 4-Aminobenzoico/química , Ácido 4-Aminobenzoico/efeitos da radiação , Absorção , Algoritmos , Bis-Fenol A-Glicidil Metacrilato/química , Bis-Fenol A-Glicidil Metacrilato/efeitos da radiação , Resinas Compostas/efeitos da radiação , Materiais Dentários/efeitos da radiação , Transferência de Energia , Humanos , Hidrogênio/química , Hidrogênio/efeitos da radiação , Luz , Teste de Materiais , Metacrilatos/efeitos da radiação , Polietilenoglicóis/química , Polietilenoglicóis/efeitos da radiação , Polímeros/química , Polímeros/efeitos da radiação , Ácidos Polimetacrílicos/química , Ácidos Polimetacrílicos/efeitos da radiação , Poliuretanos/química , Poliuretanos/efeitos da radiação , Doses de Radiação , Substâncias Redutoras/química , Substâncias Redutoras/efeitos da radiação , Terpenos/química , Fatores de Tempo , para-AminobenzoatosRESUMO
OBJECTIVE: The aim of this study was to assess volume changes that occur during photopolymerization of unfilled dental resins based on bis-GMA-TEGDMA. METHODS: The resins were activated for visible light polymerization by the addition of camphorquinone (CQ) in combination with dimethylamino ethylmethacrylate (DMAEMA) or ethyl-4-dimethyl aminobenzoate (EDMAB). A fibre-optic sensing method based on a Fizeau-type interferometric scheme was employed for monitoring contraction during photopolymerization. Measurements were carried out on 10mm diameter specimens of different thicknesses (1 and 2mm). RESULTS: The high exothermic nature of the polymerization resulted in volume expansion during the heating, and this effect was more pronounced when the sample thickness increased. Two approaches to assess volume changes due to thermal effects are presented. Due to the difference in thermal expansion coefficients between the rubbery and glassy resins, the increase of volume due to thermal expansion was greater than the decrease in volume due to thermal contraction. As a result, the volume of the vitrified resins was greater than that calculated from polymerization contraction. The observed trends of shrinkage versus sample thickness are explained in terms of light attenuation across the path length during photopolymerization. SIGNIFICANCE: Results obtained in this research highlight the inherent interlinking of non-isothermal photopolymerization and volumetric changes in bulk polymerizing systems.
Assuntos
Bis-Fenol A-Glicidil Metacrilato/química , Resinas Compostas/química , Materiais Dentários/química , Polietilenoglicóis/química , Ácidos Polimetacrílicos/química , Bis-Fenol A-Glicidil Metacrilato/efeitos da radiação , Calorimetria , Materiais Dentários/efeitos da radiação , Tecnologia de Fibra Óptica , Humanos , Interferometria , Luz , Teste de Materiais , Metacrilatos , Modelos Químicos , Transição de Fase , Polímeros/química , Polímeros/efeitos da radiação , Substâncias Redutoras , Espectrofotometria Ultravioleta , Espectroscopia de Infravermelho com Transformada de Fourier , Espectroscopia de Luz Próxima ao Infravermelho , Propriedades de Superfície , Temperatura , Terpenos/química , para-AminobenzoatosRESUMO
OBJECTIVE: The present study was carried out in order to assess the suitability of N,N-dimethylaminobenzyl alcohol (DMOH) as co-initiator of camphorquinone (CQ) and 1-phenyl-1,2-propanedione (PPD) in light-cured dental resins. METHODS: DMOH was synthesized and used as co-initiator for the photopolymerization of a model resin based on {2,2-bis[4-(2-hydroxy-3-methacryloxyprop-1-oxy)phenyl]propane} (Bis-GMA)/triethylene glycol dimethacrylate (TEGDMA). Experimental formulations containing CQ or PPD in combination with DMOH at different concentrations were studied. The photopolymerization was carried out by means of a commercial light-emitting diode (LED) curing unit. The evolution of double bonds consumption versus irradiation time was followed by near-infrared spectroscopy (NIR). The photon absorption efficiency (PAE) of the photopolymerization process was calculated from the spectral distribution of the LED unit and the molar absorption coefficient distributions of PPD and CQ. RESULTS: DMOH is an efficient photoreducer of CQ and PPD resulting in higher polymerization rate and higher double bond conversion compared with dimethylaminoethylmethacrylate. The PAE for PPD was higher than that for CQ. However, the polymerization initiated by PPD progressed at a lower rate and exhibited lower values of final conversion compared with the resins containing CQ. This observation indicates that the lower polymerization rate of the PPD/amine system should be explained in terms of the mechanism of generating primary radicals by PPD, which is less efficient compared with CQ. SIGNIFICANCE: The DMOH/benzoyl peroxide redox system, has recently been proposed as a more biocompatible accelerator for the polymerization of bone cements based on poly(methyl methacrylate), because cytotoxity tests have demonstrated that DMOH possesses better biocompatibility properties compared with traditional tertiary amines. The results obtained in the present study reveal the suitability of the CQ/DMOH initiator system for the polymerization of light-cured dental composites.