Assuntos

Assuntos

RESUMO

Con el objeto de caracterizar las poblaciones fúngicas, en particular las especies potencialmente micotoxigénicas, que pueden contaminar los granos de maíz almacenados en silos bolsa con un contenido de humedad superior al recomendado como seguro, se evaluaron 270 muestras extraídas al inicio, a los 90 días y al final de un período de almacenamiento de 5 meses. En dichas muestras se cuantificó e identificó la biota fúngica y se determinó la contaminación con fumonisinas y aflatoxinas. Asimismo, se evaluó el efecto de factores extrínsecos (ambiente), intrínsecos (granos) y tecnológicos (ubicación de los granos en el perfil del silo bolsa) sobre las poblaciones totales y micotoxigénicas. El pH de los granos y el nivel de O2 se redujeron significativamente a los 5 meses, mientras que la concentración de CO2 se incrementó en igual período. Los recuentos totales de la micobiota fueron significativamente mayores en los granos ubicados en el estrato superior del silo bolsa. Se identificaron especies micotoxigénicas de Fusarium, Aspergillus, Penicillium y Eurotium. La frecuencia de aislamiento de Fusarium verticillioides se redujo al final del almacenamiento y Aspergillus flavus solo se aisló en el inicio del almacenamiento. Los recuentos de Penicillium spp. y Eurotium spp. se incrementaron al final del almacenamiento. El 100 % de las muestras presentaron contaminación con fumonisinas, con niveles máximos de 5,707 mg/kg, mientras que las aflatoxinas contaminaron el 40 % de las muestras con niveles máximos de 0,0008 mg/kg. Las condiciones ambientales y de sustrato generadas durante el almacenamiento produjeron cambios en la composición de las poblaciones fúngicas y limitaron el desarrollo de hongos micotoxigénicos y la producción de micotoxinas.

In order to determine the behavior of mycotoxin-producing fungal populations linked with silobags stored corn grains with a moisture content greater at the recommended as safe, 270 samples taken in three times (beginning, 90 days, final) over a five month period of storage were evaluated. The fungal biota was quantified and identified and the contamination with fumonisin and aflatoxin was determined. Extrinsic factors (environment), intrinsic factors (grains) and technological factors (location of the grains in the profile of silobag) were taken into account to evaluate the presence and quantity of total and mycotoxigenic fungal populations. The pH of grains and O2 levels were significantly reduced after five months, while CO2 concentration increased in the same period. The total counts of mycobiota were significantly higher in grains located in the top layer of silobag. Mycotoxigenic species of Fusarium, Aspergillus, Penicillium and Eurotium were identified. The frequency of isolation of Fusarium verticillioides decreased at the end of storage and Aspergillus flavus was isolated only at the beginning of storage. The counts of the Penicillium spp. and Eurotium spp. were increased at the end of storage. Fumonisin contamination was found in all the samples (100 %) with maximum levels of 5.707 mg/kg whereas aflatoxin contaminated only 40 % with maximum levels of 0.0008 mg/kg. The environmental and substrate conditions generated during the storage limited the development of mycotoxigenic fungi and mycotoxin production.

Assuntos

RESUMO

In order to determine the behavior of mycotoxin-producing fungal populations linked with silobags stored corn grains with a moisture content greater at the recommended as safe, 270 samples taken in three times (beginning, 90 days, final) over a five month period of storage were evaluated. The fungal biota was quantified and identified and the contamination with fumonisin and aflatoxin was determined. Extrinsic factors (environment), intrinsic factors (grains) and technological factors (location of the grains in the profile of silobag) were taken into account to evaluate the presence and quantity of total and mycotoxigenic fungal populations. The pH of grains and O2 levels were significantly reduced after five months, while CO2 concentration increased in the same period. The total counts of mycobiota were significantly higher in grains located in the top layer of silobag. Mycotoxigenic species of Fusarium, Aspergillus, Penicillium and Eurotium were identified. The frequency of isolation of Fusarium verticillioides decreased at the end of storage and Aspergillus flavus was isolated only at the beginning of storage. The counts of the Penicillium spp. and Eurotium spp. were increased at the end of storage. Fumonisin contamination was found in all the samples (100%) with maximum levels of 5.707mg/kg whereas aflatoxin contaminated only 40% with maximum levels of 0.0008mg/kg. The environmental and substrate conditions generated during the storage limited the development of mycotoxigenic fungi and mycotoxin production.

Assuntos

RESUMO

The objective of this work was to evaluate methods to eliminate or reduce the number of indigenous arbuscular mycorrhizal fungi (AMF) from soil samples without affecting their edaphic or microbiological properties. At an early trial we evaluated moist heat (autoclaving), dry heat (oven), sodium hypochlorite (NaClO) and formaldehyde at a range of 100.0-3.3µl/g and 16.7-3.3µl/g respectively. There was no germination in plants of ryegrass (Lolium multiflorum Lam.) sown on substrates receiving NaClO (100.0-33.3µl/g), whereas autoclaving significantly increased the available soil phosphorous content. Both treatments failed to eradicate AMF colonization at 9 weeks; therefore, they were discarded. In a second trial, oven and formaldehyde (10.0µl/g) treatments were analyzed to assess the effects of seed decontamination and AMF reinoculation. Both procedures were effective in reducing or eliminating indigenous AMF at a range of soil P availability of 12-29mg/kg. However, the time between soil treatment and AMF multiplication and safety requirements were greater in the case of formaldehyde application.

Assuntos

RESUMO

El objetivo de este trabajo fue evaluar métodos para eliminar hongos nativos formadores de micorrizas arbusculares (HMA) o reducir su número en muestras de suelo, sin afectar sus propiedades edáficas y microbiológicas. Se estudió la aplicación de calor húmedo (autoclave), de calor seco (estufa), de hipoclorito de sodio (NaClO) y de formaldehído, en concentraciones entre 100,0 y 3,3 µl/g y 16,7 y 3,3 µl/g, respectivamente. Las semillas de raigrás (Lolium multiflorum Lam.) sembradas en sustratos que recibieron NaClO (100,0-33,3 µl/g) no germinaron y el autoclave incrementó el contenido de fósforo en el sustrato. Estos tratamientos no eliminaron la micorrización por HMA y ambos fueron descartados. En un segundo ensayo se analizaron los tratamientos estufa y formaldehído (10,0 µl/g), asociados o no a la descontaminación de las semillas y a la reinoculación con HMA. Ambos procedimientos redujeron o eliminaron la micorrización por HMA nativos en suelos con 12 a 29 mg/kg de fósforo y permitieron la multiplicación de inóculos de HMA. El tiempo de ventilación de las muestras y los requisitos de seguridad fueron mayores con la aplicación de formaldehído

The objective of this work was to evaluate methods to eliminate or reduce the number of indigenous arbuscular mycorrhizal fungi (AMF) from soil samples without affecting their edaphic or microbiological properties. At an early trial we evaluated moist heat (autoclaving), dry heat (oven), sodium hypochlorite (NaClO) and formaldehyde at a range of 100.0-3.3 µl/g and 16.7-3.3 µl/g respectively. There was no germination in plants of ryegrass (Lolium multiflorum Lam.) sown on substrates receiving NaClO (100.0-33.3 ul/g), whereas autoclaving significantly increased the available soil phosphorous content. Both treatments failed to eradicate AMF colonization at 9 weeks; therefore, they were discarded. In a second trial, oven and formaldehyde (10.0 µl/g) treatments were analyzed to assess the effects of seed decontamination and AMF reinoculation. Both procedures were effective in reducing or eliminating indigenous AMF at a range of soil P availability of 12-29 mg/kg. However, the time between soil treatment and AMF multiplication and safety requirements were greater in the case of formaldehyde application

Assuntos

RESUMO

The objective of this work was to evaluate methods to eliminate or reduce the number of indigenous arbuscular mycorrhizal fungi (AMF) from soil samples without affecting their edaphic or microbiological properties. At an early trial we evaluated moist heat (autoclaving), dry heat (oven), sodium hypochlorite (NaClO) and formaldehyde at a range of 100.0-3.3Al/g and 16.7-3.3Al/g respectively. There was no germination in plants of ryegrass (Lolium multiflorum Lam.) sown on substrates receiving NaClO (100.0-33.3Al/g), whereas autoclaving significantly increased the available soil phosphorous content. Both treatments failed to eradicate AMF colonization at 9 weeks; therefore, they were discarded. In a second trial, oven and formaldehyde (10.0Al/g) treatments were analyzed to assess the effects of seed decontamination and AMF reinoculation. Both procedures were effective in reducing or eliminating indigenous AMF at a range of soil P availability of 12-29mg/kg. However, the time between soil treatment and AMF multiplication and safety requirements were greater in the case of formaldehyde application.

Assuntos