RESUMO
OBJECTIVE: The aim of this study was to evaluate the efficacy of supplementary techniques (ultrasonic tip/XP-endo Finisher R) in removing remaining filling materials (gutta-percha/AHPlus/BCSealer) from oval-shaped root canals during non-surgical endodontic retreatment. MATERIAL AND METHODS: Twenty-eight distal roots of human mandibular molars with single and oval-shaped canals were initially shaped with a R40 instrument and filled with gutta-percha points and AH Plus (n = 14) or BC Sealer (n = 14) followed by an initial micro-CT scanning. Initial filling material removal was performed in all 28 samples with an R50 instrument, and all samples submitted to a second micro-CT. Supplementary techniques with ultrasonic tips or XP-endo Finisher R instruments were performed in each sealer group, and all samples submitted to a third micro-CT. The volume of remaining filling material was calculated for the entire canal as well as for the coronal, middle, and apical thirds. Statistical analyses were performed using T, ANOVA 3-way, and Tukey tests. RESULTS: Lower values of remnant filling material were found for BC Sealer (16.06 ± 14.34) compared to AH Plus (28.30 ± 10.54) (P < 0.001), and considering the supplementary technique, lower values of remnant filling material were found for the ultrasonic tip (18.95 ± 11.05) compared to XP-endo Finisher R (25.41 ± 15.81) (P = 0.025). Ultrasonic instruments significantly reduced the percentage of remaining filling material for both AH Plus (P = 0.04) and BC Sealer (P = 0.02) while XP-endo Finisher R was effective for AHPlus only (P = 0.04). The remaining filling material was observed in all samples regardless the filling material or the supplementary technique employed. CONCLUSIONS: Supplementary techniques increased filling material removal; however, none of them was able to render root canals completely free from root fillings. Ultrasonic tips should be considered a good option for endodontic retreatment, especially for bioceramic cases. CLINICAL RELEVANCE: Supplementary instrumentation techniques are effective tools to reduce the amount of filling materials during root canal retreatment.
Assuntos
Cavidade Pulpar , Materiais Restauradores do Canal Radicular , Resinas Epóxi , Guta-Percha , Humanos , Retratamento , Obturação do Canal Radicular , Preparo de Canal RadicularRESUMO
INTRODUCTION: Nonsurgical endodontic retreatment continues to be a challenge in endodontics, particularly when dealing with a complex tooth anatomy. This study evaluated the efficacy of passive ultrasonic irrigation (PUI) and the GentleWave system as supplementary techniques to remove remaining filling materials from oval-shaped root canals. METHODS: Twenty distal roots of human mandibular molars with single and oval-shaped canals were shaped with R40 (40.06) instrument and filled with gutta-percha and AH Plus sealer using warm vertical obturation. Initial filling material removal was performed with R50 (50.05) instrument, followed by the use of PUI (n = 10) or GentleWave system (n = 10). Micro-computed tomographic images were obtained after obturation, initial material removal, and after the use of PUI and GentleWave. The volume of remaining filling material was calculated for the entire canal as well as for the coronal, middle, and apical thirds. Statistical analyses were performed by using analysis of variance, Kruskal-Wallis and Mann-Whitney tests. P ≤ .05 was considered significant. RESULTS: The use of PUI and GentleWave as supplementary techniques significantly reduced the volume of remaining filling material after initial instrumentation (P < .05). However, none of these techniques was able to render canals free from filling materials. PUI showed better performance by removing 18% of the remaining filling material, whereas the GentleWave system was able to remove approximately 10% (P = .02). CONCLUSIONS: The use of supplementary techniques optimized filling material removal after initial instrumentation. PUI enhanced the overall cleaning of the root canal system during endodontic retreatment in oval-shaped canals.
Assuntos
Materiais Restauradores do Canal Radicular , Obturação do Canal Radicular , Cavidade Pulpar , Guta-Percha , Humanos , Retratamento , Preparo de Canal Radicular , UltrassomRESUMO
To compare the shaping ability of different single-file systems in the preparation of mesial curved canals of mandibular molars using micro-CT technology. Fifteen mesial roots of mandibular molars with two independent and curved canals (n = 30) were selected, scanned at a resolution of 26.7 µm anatomically matched, and distributed into three groups (n = 10), according to the preparation system: WaveOne 25.08, Reciproc 25.08, and OneShape 25.06. A final micro-CT scanning was performed, data sets were registered with their respective counterparts, and compared regarding the three-dimensional (volume, surface area, and structure model index - SMI) and two-dimensional (perimeter, area, roundness, major and minor diameters) parameters, as well as, canal transportation, using ANOVA and post hoc Tukey tests (α = 5%). Overall, no difference was observed between groups regarding area, perimeter, volume, surface area, and canal transportation (p > 0.05). Within group, no canal transportation was significantly higherobserved in the apical third (0.10 ± 0.05 mm) compared to coronal (0.08±0.040 mm) and middle (0.07 ± 0.03 mm) thirds (p < 0.05). Structure model index (SMI) was statistically higher after preparation with OneShape instrument (0.36 ± 0.26) compared to other systems (p < 0.05). Within the parameters of this study, similar shaping ability was observed in the preparation of mesial curved root canals of mandibular molars with Reciproc, OneShape and WaveOne systems.
Assuntos
Cavidade Pulpar/anatomia & histologia , Cavidade Pulpar/diagnóstico por imagem , Preparo de Canal Radicular/instrumentação , Análise de Variância , Instrumentos Odontológicos , Desenho de Equipamento , Humanos , Teste de Materiais , Dente Molar/anatomia & histologia , Valores de Referência , Estatísticas não Paramétricas , Microtomografia por Raio-X/métodosRESUMO
OBJECTIVE: This study evaluated the influence of endodontic sealers with different chemical compositions on bond strength of resin cement/glass fiber post junction to root dentin. MATERIALS AND METHODS: Seventy-two maxillary canines roots were instrumented with Reciproc (#R50) and distributed in 6 groups (n = 12) according to endodontic sealers: G1-control (no sealer); G2-Endofill; G3-Sealapex; G4-AH Plus; G5-Sealer Plus; G6-EndoSequence BC. The glass fiber post was cemented with Panavia F in 10 of the specimens. Two specimens from each group did not receive post and were analyzed by SEM to verify presence of filling material. Three slices were obtained from each third. The first slice was subjected to push-out test and type of failure. The second slice was imaged using laser confocal microscopy for evaluation of dentin/resin cement adhesive interface. Bond strength (BS) data were analyzed using two-way ANOVA and Tukey's post hoc tests; for LCM data, we used Kruskal-Wallis and Dunn's tests. RESULTS: Endofill yielded the lowest BS values (p < 0.05). The control and AH Plus groups differed from all others (p < 0.05). In all groups, adhesive to dentin failure predominated. Most specimens of control and AH Plus groups had acceptable interfaces, while those of EndoSequence BC, Sealapex, and Sealer Plus groups ranged between acceptable and poor interfaces. Overall, few filling material remnants were observed on the dentin. CONCLUSION: EndoSequence BC, Sealapex, Sealer Plus, and Endofill negatively interfere with BS of glass fiber post/resin cement junction to root dentin. CLINICAL RELEVANCE: In cases whose restoration planning includes a post cemented with resin cement, it is recommended that endodontic sealer be based on epoxy resin.
Assuntos
Dentina , Técnica para Retentor Intrarradicular , Colagem Dentária , Resinas Epóxi , Vidro , Teste de Materiais , Cimentos de Resina , Materiais Restauradores do Canal RadicularRESUMO
Abstract To compare the shaping ability of different single-file systems in the preparation of mesial curved canals of mandibular molars using micro-CT technology. Fifteen mesial roots of mandibular molars with two independent and curved canals (n = 30) were selected, scanned at a resolution of 26.7 μm anatomically matched, and distributed into three groups (n = 10), according to the preparation system: WaveOne 25.08, Reciproc 25.08, and OneShape 25.06. A final micro-CT scanning was performed, data sets were registered with their respective counterparts, and compared regarding the three-dimensional (volume, surface area, and structure model index - SMI) and two-dimensional (perimeter, area, roundness, major and minor diameters) parameters, as well as, canal transportation, using ANOVA and post hoc Tukey tests (α = 5%). Overall, no difference was observed between groups regarding area, perimeter, volume, surface area, and canal transportation (p > 0.05). Within group, no canal transportation was significantly higherobserved in the apical third (0.10 ± 0.05 mm) compared to coronal (0.08±0.040 mm) and middle (0.07 ± 0.03 mm) thirds (p < 0.05). Structure model index (SMI) was statistically higher after preparation with OneShape instrument (0.36 ± 0.26) compared to other systems (p < 0.05). Within the parameters of this study, similar shaping ability was observed in the preparation of mesial curved root canals of mandibular molars with Reciproc, OneShape and WaveOne systems.
Assuntos
Humanos , Preparo de Canal Radicular/instrumentação , Cavidade Pulpar/anatomia & histologia , Cavidade Pulpar/diagnóstico por imagem , Valores de Referência , Teste de Materiais , Análise de Variância , Estatísticas não Paramétricas , Instrumentos Odontológicos , Desenho de Equipamento , Microtomografia por Raio-X/métodos , Dente Molar/anatomia & histologiaRESUMO
OBJECTIVE: To evaluate the effect of ultrasonic and sonic activation on physicochemical properties of AH Plus, MTA Fillapex, ADSeal, GuttaFlow Bioseal, and GuttaFlow 2 sealers. METHODOLOGY: Three experimental groups were formed: no activation (NA), ultrasonic activation (UA), and sonic activation (SA). The sealers were manipulated according to the manufacturers' instructions. A 3-mL syringe was adapted to receive 1 mL of sealer. Activation was performed with a 20/.01 ultrasonic insert (20 s/1W) in the UA group. A size 35.04 sonic tip was used (20 s/10,000 cycles/min-1) in the SA group. The molds for physicochemical analysis were filled and evaluated according to ANSI/ADA specification no. 57: setting time (ST), flow (FL), dimensional change (DC), solubility (SB), and radiopacity (RD). Statistical analysis was performed by Kruskal-Wallis, one-way ANOVA, and Tukey's tests (P<0.05). RESULTS: Regarding ST, only AH Plus and GuttaFlow 2 in the NA group met the ANSI/ADA standards. All FL values were greater than 20 mm in diameter, as determined by ANSI/ADA. The tested sealers and protocols did not comply with the ANSI/ADA standards for DC. As for SB, only MTA Fillapex, regardless of the activation protocol, did not follow the ANSI/ADA standards. All of the investigated sealers, regardless of the activation protocol, presented radiographic density higher than 3 mm Al, as proposed by ANSI/ADA. CONCLUSIONS: UA and SA promoted changes in the physicochemical properties of the evaluated root canal sealers, mainly in ST and F. Thus, it is important to evaluate the physicochemical properties of endodontic sealers associated with activation techniques prior to clinical application in order to determine whether the properties follow the parameters set by ANSI/ADA, ensuring safety and quality of root canal filling.
Assuntos
Compostos de Alumínio/química , Compostos de Cálcio/química , Dimetilpolisiloxanos/química , Resinas Epóxi/química , Guta-Percha/química , Óxidos/química , Materiais Restauradores do Canal Radicular/química , Silicatos/química , Ondas Ultrassônicas , Análise de Variância , Combinação de Medicamentos , Teste de Materiais , Valores de Referência , Reprodutibilidade dos Testes , Solubilidade , Estatísticas não Paramétricas , Propriedades de Superfície , Fatores de TempoRESUMO
Abstract Objective: To evaluate the effect of ultrasonic and sonic activation on physicochemical properties of AH Plus, MTA Fillapex, ADSeal, GuttaFlow Bioseal, and GuttaFlow 2 sealers. Methodology: Three experimental groups were formed: no activation (NA), ultrasonic activation (UA), and sonic activation (SA). The sealers were manipulated according to the manufacturers' instructions. A 3-mL syringe was adapted to receive 1 mL of sealer. Activation was performed with a 20/.01 ultrasonic insert (20 s/1W) in the UA group. A size 35.04 sonic tip was used (20 s/10,000 cycles/min-1) in the SA group. The molds for physicochemical analysis were filled and evaluated according to ANSI/ADA specification no. 57: setting time (ST), flow (FL), dimensional change (DC), solubility (SB), and radiopacity (RD). Statistical analysis was performed by Kruskal-Wallis, one-way ANOVA, and Tukey's tests (P<0.05). Results: Regarding ST, only AH Plus and GuttaFlow 2 in the NA group met the ANSI/ADA standards. All FL values were greater than 20 mm in diameter, as determined by ANSI/ADA. The tested sealers and protocols did not comply with the ANSI/ADA standards for DC. As for SB, only MTA Fillapex, regardless of the activation protocol, did not follow the ANSI/ADA standards. All of the investigated sealers, regardless of the activation protocol, presented radiographic density higher than 3 mm Al, as proposed by ANSI/ADA. Conclusions: UA and SA promoted changes in the physicochemical properties of the evaluated root canal sealers, mainly in ST and F. Thus, it is important to evaluate the physicochemical properties of endodontic sealers associated with activation techniques prior to clinical application in order to determine whether the properties follow the parameters set by ANSI/ADA, ensuring safety and quality of root canal filling.
Assuntos
Óxidos/química , Materiais Restauradores do Canal Radicular/química , Silicatos/química , Compostos de Cálcio/química , Compostos de Alumínio/química , Dimetilpolisiloxanos/química , Resinas Epóxi/química , Ondas Ultrassônicas , Guta-Percha/química , Valores de Referência , Solubilidade , Propriedades de Superfície , Fatores de Tempo , Teste de Materiais , Reprodutibilidade dos Testes , Análise de Variância , Estatísticas não Paramétricas , Combinação de MedicamentosRESUMO
The aim of this study was to compare two irrigation techniques and four devices for endodontic sealer placement into the dentinal tubules. Ninety-nine single-rooted human teeth were instrumented and allocated to either the control (CO) (n=11) or experimental groups according to the irrigation method: syringe and NaveTip needle (NT) (n=44), and EndoActivator (EA) (n=44). These groups were subdivided according to sealer placement into K-File (KF), lentulo spiral (LS), Easy Clean (EC), and EndoActivator (EA) subgroups. Moreover, the distances of 5 mm and 2 mm from the apex were analyzed. The teeth were obturated with AH Plus and GuttaCore X3. Analyses were performed by scanning electron microscopy associated to cathodoluminescence. The percentage and maximum depth of sealer penetration were measured. Data were evaluated by three-way analysis of variance (ANOVA) and Games-Howell test (p<0.05). EA was superior to NT in percentage of sealer penetration. EC was significantly superior to EA (subgroup) for sealer penetration, and both improved the percentage of sealer penetration when compared to LS. Better sealer penetration was observed at the distance of 5 mm from the apex. Sealer penetration into the dentinal tubules was significantly improved by sonic irrigant activation.
Assuntos
Dentina/efeitos dos fármacos , Materiais Restauradores do Canal Radicular/química , Irrigantes do Canal Radicular/química , Obturação do Canal Radicular/métodos , Preparo de Canal Radicular/métodos , Irrigação Terapêutica/métodos , Análise de Variância , Cavidade Pulpar/efeitos dos fármacos , Cavidade Pulpar/ultraestrutura , Dentina/ultraestrutura , Resinas Epóxi/química , Resinas Epóxi/uso terapêutico , Humanos , Teste de Materiais , Microscopia Confocal , Microscopia Eletrônica de Varredura , Reprodutibilidade dos Testes , Rodaminas , Materiais Restauradores do Canal Radicular/uso terapêutico , Irrigantes do Canal Radicular/uso terapêutico , Obturação do Canal Radicular/instrumentação , Preparo de Canal Radicular/instrumentação , Irrigação Terapêutica/instrumentaçãoRESUMO
This study evaluates the influence of root dentin treatment with NaOCl alone and combined with EDTA, with and without ultrasound activation, on the push-out bond strength (BS) of fiber-reinforced posts in weakened roots, cemented with RelyX or Panavia. The root canals of 42 maxillary canines were instrumented with Reciproc and 2.5% NaOCl. In the coronal 12mm of all canals, experimental weakening of the roots was produced by reducing dentin thickness with 2.44mm diameter diamond burs. The roots were assigned to 3 groups (n = 14) according to root dentin treatment: 2.5% NaOCl; 2.5% NaOCl + 17% EDTA; and 2.5% NaOCl + 17% EDTA, with solutions agitated using passive ultrasonic irrigation. After cementation of the fiber-reinforced posts the roots were divided in thirds. The first slice of each third was used for the push-out BS test, the second slice for confocal laser scanning microscopy and dentin microhardness (Knoop) analysis. Data were analysed by a two-way ANOVA and Tukey test (a = 0.05). NaOCl + EDTA provided highest BS values than NaOCl (p < 0.0001). Specimens cemented with Panavia presented significantly higher BS than those with RelyX in the three root thirds (p < 0.0001). The highest BS values occurred in the cervical third (p < 0.001). Ultrasound-activated NaOCl + EDTA promoted the greatest reduction in dentin microhardness, followed by NaOCl/EDTA and NaOCl. Ultrasonic activation of NaOCl and EDTA reduced root dentin microhardness, but did not improve the push-out BS of resin-based cements. Panavia presented higher BS than RelyX. RelyX was not influenced by the root dentin treatment protocols.
Assuntos
Colagem Dentária/métodos , Dentina/efeitos dos fármacos , Ácido Edético/química , Cimentos de Resina/química , Hipoclorito de Sódio/química , Raiz Dentária/efeitos dos fármacos , Condicionamento Ácido do Dente/métodos , Análise de Variância , Falha de Restauração Dentária , Dentina/efeitos da radiação , Testes de Dureza , Humanos , Teste de Materiais , Microscopia Confocal , Técnica para Retentor Intrarradicular , Distribuição Aleatória , Valores de Referência , Reprodutibilidade dos Testes , Irrigantes do Canal Radicular/química , Preparo de Canal Radicular/métodos , Estatísticas não Paramétricas , Propriedades de Superfície/efeitos dos fármacos , Raiz Dentária/efeitos da radiação , Terapia por UltrassomRESUMO
INTRODUCTION: Complementary methods of anatomic diagnosis, including cone-beam computed tomographic (CBCT) imaging, may be useful in the diagnosis of mesiobuccal (MB) canals of maxillary molars. METHODS: Thirty-five maxillary first molars were subjected to ex vivo analysis and 4 CBCT protocols: i-CAT Classic (Imaging Sciences International, Hatfield, PA) (ICC group), i-CAT Next Generation (Imaging Sciences International) (ICN group), PreXion 3D (PreXion, San Mateo, CA) (16.8-second acquisition time; PX1 group), and PreXion 3D (33.5-second acquisition time; PX2 group). The images were evaluated by 2 calibrated endodontists who kept records following protocols previously published in the literature. Micro-computed tomographic imaging was used as the control. RESULTS: The correct identification of anatomic variations of MB roots was 54.3% (n = 19) in the ICC group, 65.7% (n = 23) in the ICN group, and 80.0% (n = 28) in the PX1 and PX2 groups. The probability of agreement between the ICC and the control groups was significantly different from the probability of agreement with the PX1 (P < .05) and PX2 (P < .05) groups. The other groups showed no significant differences compared with the control group. There was no difference in the probability of agreement between the tomographic protocols and the ex vivo results. CONCLUSIONS: The PX1 and PX2 groups were more effective for the diagnosis of MB canals. PX1 is the most suitable because it results in a shorter radiation time and diagnostic imaging similar to PX2. The single-canal anatomy was the most prevalent in the study.
Assuntos
Tomografia Computadorizada de Feixe Cônico/métodos , Cavidade Pulpar/diagnóstico por imagem , Dente Molar/diagnóstico por imagem , Protocolos Clínicos , Cavidade Pulpar/anatomia & histologia , Humanos , Maxila , Dente Molar/anatomia & histologia , Raiz Dentária/anatomia & histologia , Raiz Dentária/diagnóstico por imagemRESUMO
Abstract This study evaluates the influence of root dentin treatment with NaOCl alone and combined with EDTA, with and without ultrasound activation, on the push-out bond strength (BS) of fiber-reinforced posts in weakened roots, cemented with RelyX or Panavia. The root canals of 42 maxillary canines were instrumented with Reciproc and 2.5% NaOCl. In the coronal 12mm of all canals, experimental weakening of the roots was produced by reducing dentin thickness with 2.44mm diameter diamond burs. The roots were assigned to 3 groups (n = 14) according to root dentin treatment: 2.5% NaOCl; 2.5% NaOCl + 17% EDTA; and 2.5% NaOCl + 17% EDTA, with solutions agitated using passive ultrasonic irrigation. After cementation of the fiber-reinforced posts the roots were divided in thirds. The first slice of each third was used for the push-out BS test, the second slice for confocal laser scanning microscopy and dentin microhardness (Knoop) analysis. Data were analysed by a two-way ANOVA and Tukey test (a = 0.05). NaOCl + EDTA provided highest BS values than NaOCl (p < 0.0001). Specimens cemented with Panavia presented significantly higher BS than those with RelyX in the three root thirds (p < 0.0001). The highest BS values occurred in the cervical third (p < 0.001). Ultrasound-activated NaOCl + EDTA promoted the greatest reduction in dentin microhardness, followed by NaOCl/EDTA and NaOCl. Ultrasonic activation of NaOCl and EDTA reduced root dentin microhardness, but did not improve the push-out BS of resin-based cements. Panavia presented higher BS than RelyX. RelyX was not influenced by the root dentin treatment protocols.
Assuntos
Humanos , Colagem Dentária/métodos , Dentina/efeitos dos fármacos , Ácido Edético/química , Cimentos de Resina/química , Hipoclorito de Sódio/química , Raiz Dentária/efeitos dos fármacos , Condicionamento Ácido do Dente/métodos , Análise de Variância , Falha de Restauração Dentária , Dentina/efeitos da radiação , Testes de Dureza , Teste de Materiais , Microscopia Confocal , Técnica para Retentor Intrarradicular , Distribuição Aleatória , Valores de Referência , Reprodutibilidade dos Testes , Irrigantes do Canal Radicular/química , Preparo de Canal Radicular/métodos , Estatísticas não Paramétricas , Propriedades de Superfície/efeitos dos fármacos , Raiz Dentária/efeitos da radiação , Terapia por UltrassomRESUMO
INTRODUCTION: This study evaluated filling material removal from distal oval-shaped canals of mandibular molars with rotary, reciprocating, and adaptive motion systems by using micro-computed tomography. METHODS: After cone-beam computed tomography scanning, 21 teeth were selected, prepared up to a size 40 file, root filled, and divided into 3 groups (n = 7) according to the filling material removal technique: group PTUR, ProTaper Universal Retreatment combined with ProTaper Universal F2, F3, F4, and F5 files; group RP, Reciproc R50 file; and group TFA: TF Adaptive 50.04 files. The specimens were scanned preoperatively and postoperatively to assess filling material removal by using micro-computed tomography imaging, and the percent volume of residual filling material was calculated. RESULTS: The statistical analysis showed the lowest percent volume of residual filling material at the coronal third in all groups (P < .05). There was no significant difference among the systems in the coronal third (P > .05). In the middle third, group TFA (31.2 ± 10.1) showed lower volume of residual filling material than group RP (52.4 ± 14.1) (P < .05). In the apical third, groups TFA (44.8 ± 20.6) and PTUR (48.6 ± 16.8) presented a lower percent volume of filling material than group RP (70.6 ± 7.2) (P < .05), as confirmed by the qualitative analysis. CONCLUSIONS: The use of the adaptive motion increased the amount of root filling removed in the middle and apical thirds compared with the reciprocating motion. However, no technique was able to completely remove the filling material from the canals.
Assuntos
Movimento (Física) , Retratamento , Materiais Restauradores do Canal Radicular/química , Obturação do Canal Radicular/métodos , Preparo de Canal Radicular/métodos , Microtomografia por Raio-X/métodos , Análise de Variância , Anatomia Transversal , Tomografia Computadorizada de Feixe Cônico , Ligas Dentárias/química , Instrumentos Odontológicos , Cavidade Pulpar/anatomia & histologia , Cavidade Pulpar/diagnóstico por imagem , Resinas Epóxi , Desenho de Equipamento , Guta-Percha , Humanos , Mandíbula , Dente Molar , Níquel/química , Irrigantes do Canal Radicular , Obturação do Canal Radicular/instrumentação , Preparo de Canal Radicular/instrumentação , Rotação , Propriedades de Superfície , Titânio/química , Ápice Dentário/anatomia & histologia , Ápice Dentário/diagnóstico por imagemRESUMO
Introduction: The endoperiodontal lesion occurs when a tooth undergoing endodontic disease is united to a periodontal lesion with apical progression. Many times, the differential diagnosis between the endodontic and periodontal disease can be of difficult execution and the correct diagnosis and planing of the treatment is of main importance for a good prognosis. Objective: To identify the main microorganisms within the lesion of endodontic and periodontal origin and correlate them with the endoperiodontal lesion. Literature review: The search strategy comprised the electronic studies of databases such as PubMed and Cochrane on the microbiology of the endodontic and periodontal systems through employing the following keywords: microbiology, endodontics, periodontal pocket. Results: There were similarities in the endodontic and periodontal microflora. However, the number of microorganisms within the cross infection is limited, including Bacteroides, Eubacteria, Fusobacteria, spirochaetes, Wolinella. The bacterias forming the red complex are closely related to the severity of the periodontal disease and can also participate in the pathogenesis of the periradicular abscesses. Conclusion: There are many communication routes between the periodontium and pulpal tissue, therefore the contamination from um tissue to another can occur, existing a microbiological inter-relationship between these tissues.
RESUMO
This paper describes and discusses the multidisciplinary treatment involving a permanent maxillary lateral incisor fused to a supernumerary tooth, both presenting pulp necrosis and periapical lesion. A 15-year-old male patient sought treatment complaining of pain, swelling and mobility on the maxillary right lateral incisor. After clinical and radiographic examination, root canal preparation was performed according to the crown-down technique and a calcium hydroxide dressing was placed for 15 days. The patient returned and the definitive endodontic filling was done with thermomechanical compaction of gutta-percha and sealer. After 18 months, clinical and radiographic examinations were carried out and no pain or swelling was reported. Two years after endodontic treatment, the patient returned for periodontal and cosmetic treatments. Nine months later, a cone-beam computed tomography (CBCT) revealed that the previously detected periodontal defect and periapical lesion were persistent. Apical endodontic surgery was indicated. The supernumerary tooth was removed, the communicating distal surface was filled and the surgical site received bioactive glass and demineralized bovine organic bone. The pathological tissue was submitted to histopathological examination and the diagnosis was periapical cyst. One year after the apical endodontic surgery, CBCT showed bone formation at maxillary lateral incisor apical area. Two years after the surgery, the restoration was replaced due to aesthetic reasons and periapical radiograph showed success after 5 years of treatment. A correct diagnosis and establishment of an adequate treatment plan resulted in a successful management of the case.
Assuntos
Dentes Fusionados/cirurgia , Dente Supranumerário/cirurgia , Criança , Necrose da Polpa Dentária/terapia , Humanos , Incisivo , Masculino , Cisto Radicular/patologia , Cisto Radicular/terapiaRESUMO
This paper describes and discusses the multidisciplinary treatment involving a permanent maxillary lateral incisor fused to a supernumerary tooth, both presenting pulp necrosis and periapical lesion. A 15-year-old male patient sought treatment complaining of pain, swelling and mobility on the maxillary right lateral incisor. After clinical and radiographic examination, root canal preparation was performed according to the crown-down technique and a calcium hydroxide dressing was placed for 15 days. The patient returned and the definitive endodontic filling was done with thermomechanical compaction of gutta-percha and sealer. After 18 months, clinical and radiographic examinations were carried out and no pain or swelling was reported. Two years after endodontic treatment, the patient returned for periodontal and cosmetic treatments. Nine months later, a cone-beam computed tomography (CBCT) revealed that the previously detected periodontal defect and periapical lesion were persistent. Apical endodontic surgery was indicated. The supernumerary tooth was removed, the communicating distal surface was filled and the surgical site received bioactive glass and demineralized bovine organic bone. The pathological tissue was submitted to histopathological examination and the diagnosis was periapical cyst. One year after the apical endodontic surgery, CBCT showed bone formation at maxillary lateral incisor apical area. Two years after the surgery, the restoration was replaced due to aesthetic reasons and periapical radiograph showed success after 5 years of treatment. A correct diagnosis and establishment of an adequate treatment plan resulted in a successful management of the case.
Este caso descreve o tratamento multidisciplinar de um incisivo lateral superior permanente fusionado a um dente supranumerário, ambos apresentando necrose pulpar e lesão periapical. Paciente compareceu ao consultório se queixando de dor, edema e mobilidade do incisivo lateral superior. O preparo endodôntico foi realizado no sentido coroa-ápice e foi colocada pasta de hidróxido de cálcio como medicação intra-canal por 15 dias. A seguir, a obturação foi realizada pela termoplastificação da guta-percha. Após 18 meses, foram realizados exames clínicos e radiográficos indicando ausência de dor e edema. Dois anos após o tratamento endodôntico, o paciente retornou para o tratamento periodontal e estético. Nove meses depois, foi realizada tomografia computadorizada e observou-se presença de defeito periodontal e lesão periapical. Foi então indicada e planejada a cirurgia paraendodôntica. O dente supranumerário foi removido e a área de comunicação com o canal radicular do incisivo lateral foi preenchida; a loja cirúrgica foi preenchida com vidro bioativo e osso orgânico bovino desmineralizado. O tecido patológico da lesão periapical foi submetido à análise histopatológica sendo diagnosticado como cisto periapical. Um ano após a cirurgia parendodôntica, uma nova tomografia computadorizada mostrou neoformação óssea na região periapical do dente em questão. Doi anos após a cirurgia, a restauração foi trocada devido à motivos estéticos e uma radiografia periapical mostrou sucesso do tratamento (5 anos após o tratamento inicial). Um correto diagnóstico e plano de tratamento multidisciplinar é essencial para o sucesso do tratamento de dentes fusionados à dentes supranumerários.