RESUMO
OBJECTIVE: To evaluate the role of depression in the development of TMD groups. METHODS: This systematic review with meta-analysis compared the prevalence and scores of depression between TMD groups and controls. RESULTS: The results showed that depression was a significant risk factor in the development of RDC/TMD axis I muscle disorders (group I) and arthralgia/osteoarthritis/osteoarthrosis (group III), and non-significant for disc displacements (group II). Severe depression had almost four times the risk of developing TMD as compared to moderate depression. CONCLUSION: These findings suggest that addressing psychological factors in general, and depression in particular, in the managemenof TMD is crucial, especially in those TMD groups with higher pain levels (I and III), and the TMD pain reduction is crucial in reducing depression levels.
RESUMO
This study aimed to evaluate the effect of three hydrofluoric acid (HF) etching periods on the micro-tensile bond strength between two CAD-CAM ceramic systems [Vita Suprinity (VS) and feldspathic CEREC blocs (CB)] and a composite resin. The ceramics were categorized into six groups based on the surface conditioning protocol used, as follows: G1: CB-HF 5% for 20 s; G2: CB-HF 5% for 40 s; G3: CB-HF 5% for 60 s; G4: VS-HF 5% for 20 s; G5: VS-HF 5% for 40 s; G6: VS-HF 5% for 60 s. Scotchbond Universal was applied onto the pretreated ceramic surfaces and covered with Filtek Z350 XT composite resin. After 24 h, the specimens were cut into microbars (n = 16) and a micro-tensile bond strength test (µTBS) was carried out. An optical microscope was used to examine the fractured microbars. The results showed statistically significant differences between the factors tested (p < 0.01). Moreover, the mean MPa of G1(17.27), G2(13.03), G3(12.82), G4(15.83), G5(21.66), and G6(14.50) was seen to significantly differ. The predominant failure type observed was adhesive, and all three periods of HF etching produced satisfactory bonding between the composite resin and CB. An etching time of 40 s provided the highest µTBS value for VS.