RESUMO
This study evaluated the feasibility of an automated method to delimit the required area to quantitatively analyze root filling voids and gaps from cross-sectional confocal laser scanning microscopy (CLSM) images. Root canals of maxillary canines were prepared with rotary instruments and filled by lateral compaction technique using gutta-percha and AH Plus sealer. The roots were stored (100% humidity, 37 °C) for a period of 24 h and then transversally sectioned to obtain 2-mm-thick slices from the apical and middle thirds. The areas corresponding to filling materials, gaps, and voids were manually delimited or automatically demarked by ImageJ software after converting the images to the RGB color system. Based on manual and automatic delimitations, the percentages of voids and gaps were calculated. Data of voids and gaps between middle and apical thirds were individually compared by paired t-test. Pearson`s correlation test was used to assess the correlation of data between the methods. Irrespective of the method of area delimitation, no difference was observed between the root thirds for both voids and gaps, while the p-values calculated for each method were similar. Almost perfect correlations between the methods were observed for both outcomes. The proposed method to automatically delimit the areas corresponding to filling material, voids, and gaps appears to be a valid method to facilitate the quantitative analysis of defects in root canal fillings using topographic CSLM images.
Assuntos
Materiais Restauradores do Canal Radicular , Resinas Epóxi , Estudos Transversais , Preparo de Canal Radicular , Cavidade Pulpar/diagnóstico por imagem , Teste de Materiais , Guta-Percha , Obturação do Canal Radicular/métodosRESUMO
OBJECTIVES: This study evaluates the bond strength and marginal adaptation of mineral trioxide aggregate (MTA) Repair HP and Biodentine used as apical plugs; MTA was used as reference material for comparison. MATERIALS AND METHODS: A total of 30 single-rooted teeth with standardized, artificially created open apices were randomly divided into 3 groups (n = 10 per group), according to the material used to form 6-mm-thick apical plugs: group 1 (MTA Repair HP); group 2 (Biodentine); and group 3 (white MTA). Subsequently, the specimens were transversely sectioned to obtain 2 (cervical and apical) 2.5-mm-thick slices per root. Epoxy resin replicas were observed under a scanning electron microscope to measure the gap size at the material/dentin interface (the largest and smaller gaps were recorded for each replica). The bond strength of the investigated materials to dentin was determined using the push-out test. The variable bond strengths and gap sizes were evaluated independently at the apical and cervical root dentin slices. Data were analyzed using descriptive and analytic statistics. RESULTS: The comparison between the groups regarding the variables' bond strengths and gap sizes showed no statistical difference (p > 0.05) except for a single difference in the smallest gap at the cervical root dentin slice, which was higher in group 3 than in group 1 (p < 0.05). CONCLUSIONS: The bond strength and marginal adaptation to root canal walls of MTA HP and Biodentine cement were comparable to white MTA.
RESUMO
This study aimed to describe the morphometric relationship of root canal orifices on the pulp floor in the presence/absence of mesiobuccal second canal (MB2) in the maxillary first molars and other aspects of its internal anatomy. Sixty-two maxillary first molars were scanned by micro-CT. The presence of the MB2 canal was verified. The distance between the center points of the MB1, MB2, distobuccal (DB), and palatal (P) canal orifices on the pulp floor were measured (MB1-MB2, MB1-DB, MB2-DB, MB1-P, and DB-P). The MB1-P to DB-P ratio was calculated. The distances between the anatomic apex and the MB1 and MB2 apical foramina were measured. The length of the band-shaped isthmus was also measured. Student's t-test was applied to verify the association between the presence of an MB2 canal, the interorifice distances, and the ratio of the MB1-P to DB-P distance (α = 5%). The MB2 canal was present in 43 roots (69.35%). Statistics showed significant differences when MB2 was present for the largest MB1-P distance (p < 0.05) and higher values for the MB1-P to DB-P ratio (p < 0.05). A band-shaped isthmus was detected in 25.8% of MB roots. The mean distance from the apical foramen to the isthmus floor ranged from 1.74 for MB1 canals to 1.42 for MB2 canals. Canal orifice distances on the pulp floor may predict the presence of MB2 canals. There was a high incidence of isthmus, accessory canals, and apical delta in the critical apical zone in MB roots of maxillary first molars.
Assuntos
Maxila , Raiz Dentária , Cavidade Pulpar/diagnóstico por imagem , Humanos , Maxila/diagnóstico por imagem , Dente Molar/diagnóstico por imagem , Raiz Dentária/diagnóstico por imagem , Microtomografia por Raio-XRESUMO
INTRODUCTION: The purpose of this study was to evaluate the impact of conservative endodontic cavities (CECs) on root canal preparation, restoration, and biomechanical behavior of teeth prepared using different shaping systems and restorative materials. METHODS: Ninety upper premolars with a bifurcated root were matched based on morphology and randomly assigned to a control group (n = 10) or 1 of the following experimental groups (n = 40): traditional endodontic cavity and CEC. Teeth were subdivided according to instrumentation (n = 10) as follows: ProTaper Universal (Dentsply Maillefer, Ballaigues, Switzerland), Reciproc (VDW GmbH, Munich, Germany), Reciproc Blue (VDW GmbH), and Hyflex EDM (Coltene/Whaledent, Altstätten, Switzerland). After canal obturation, teeth were restored using temporary material, conventional composite, regular bulk fill composite, or bulk fill flow combined with conventional composite. Before and after preparation and after obturation, the teeth were scanned using micro-computed tomographic imaging. Canal transportation (CT), the percentage of untouched canal surfaces (UCSs), voids in restoration (VRs), and residual filling material in the pulp chamber were evaluated. Finite element analysis, fracture resistance, and the failure pattern were recorded. The data were analyzed using analysis of variance and the Tukey and chi-square tests. RESULTS: CECs had greater CT, percentage of filling material, and VRs compared with traditional endodontic cavities (P < .0001). The highest CT and UCSs were observed in CEC with ProTaper Universal. Bulk fill flow combined with conventional composite showed a lower percentage of VRs compared with other restorative materials (P < .05). Finite element analysis, fracture resistance, and failure pattern revealed similar behaviors in all groups (P > .05) . CONCLUSIONS: CECs had a negative impact on root canal centralization, UCSs, cleaning of the pulp chamber, and percentage of VRs. Controlled memory instruments were the most adequate for the root canal preparation of CECs. The endodontic cavity did not influence the biomechanical behavior of restored teeth.
Assuntos
Cavidade Pulpar , Preparo de Canal Radicular , Dente Pré-Molar , Cavidade Pulpar/diagnóstico por imagem , Alemanha , Tratamento do Canal RadicularRESUMO
Abstract: This study aimed to describe the morphometric relationship of root canal orifices on the pulp floor in the presence/absence of mesiobuccal second canal (MB2) in the maxillary first molars and other aspects of its internal anatomy. Sixty-two maxillary first molars were scanned by micro-CT. The presence of the MB2 canal was verified. The distance between the center points of the MB1, MB2, distobuccal (DB), and palatal (P) canal orifices on the pulp floor were measured (MB1-MB2, MB1-DB, MB2-DB, MB1-P, and DB-P). The MB1-P to DB-P ratio was calculated. The distances between the anatomic apex and the MB1 and MB2 apical foramina were measured. The length of the band-shaped isthmus was also measured. Student's t-test was applied to verify the association between the presence of an MB2 canal, the interorifice distances, and the ratio of the MB1-P to DB-P distance (α = 5%). The MB2 canal was present in 43 roots (69.35%). Statistics showed significant differences when MB2 was present for the largest MB1-P distance (p < 0.05) and higher values for the MB1-P to DB-P ratio (p < 0.05). A band-shaped isthmus was detected in 25.8% of MB roots. The mean distance from the apical foramen to the isthmus floor ranged from 1.74 for MB1 canals to 1.42 for MB2 canals. Canal orifice distances on the pulp floor may predict the presence of MB2 canals. There was a high incidence of isthmus, accessory canals, and apical delta in the critical apical zone in MB roots of maxillary first molars.
Assuntos
Raiz Dentária/diagnóstico por imagem , Maxila/diagnóstico por imagem , Cavidade Pulpar/diagnóstico por imagem , Microtomografia por Raio-X , Dente Molar/diagnóstico por imagemRESUMO
This trial assessed post-operative pain and healing of apical periodontitis following endodontic therapy with a reciprocating system compared to a crown-down technique with hand files and lateral compaction filling. One-hundred and twenty nonvital anterior teeth with apical periodontitis were randomly treated using either a reciprocating single file followed by matching-taper single-cone filling or a hand file and lateral compaction filling. Postoperative pain was assessed during the 7 days after the treatment, using a visual analogue scale and a verbal rating scale. Apical healing was assessed using the periapical index score after a 12-month follow-up. The hypothesis tested was that both protocols were equivalent and present similar effectiveness in healing periapical lesions. Data were analyzed through two one-sided tests, t-tests, as well as Mann-Whitney and Chi-squared tests (α = 0.05). Logistic regression was used to investigate the association of clinical and demographic factors with the success of treatment. Regardless of the assessment time, no difference in incidence (38%-43% at first 24h), intensity of postoperative pain, and incidence of flare-up (≈ 3%) was observed between the two endodontic protocols. Both protocols resulted in a similar healing rate of apical periodontitis. After 12 months, the success rate ranged from 73% to 78% and the difference between the treatments fell within the pre-established equivalence margin (-0.1; -0.41 to 0.2). Endodontic treatment combining a reciprocating single file with matching-taper single cone showed similar clinical effectiveness to the treatment using hand-file instrumentation and the lateral compaction filling.
Assuntos
Periodontite Periapical/cirurgia , Endodontia Regenerativa/métodos , Materiais Restauradores do Canal Radicular/uso terapêutico , Preparo de Canal Radicular/métodos , Adulto , Feminino , Humanos , Masculino , Medição da Dor/métodos , Dor Pós-Operatória/patologia , Periodontite Periapical/patologia , Tratamento do Canal Radicular/métodos , Dente/fisiopatologia , Dente/cirurgia , CicatrizaçãoRESUMO
OBJECTIVES: To compare the root filling quality, the sealer extrusion, and the healing rates of apical lesions addressed via two endodontic treatment approaches. The hypothesis tested was that both techniques present similar apical periodontitis healing results. MATERIALS AND METHODS: This study was a parallel-design, pragmatic, and randomized clinical trial. One hundred twenty anterior teeth with necrotic pulps and apical periodontitis were randomly allocated to be either instrumented with hand files and obturated with the lateral compaction technique or instrumented with a single file in a reciprocating movement and obturated with a single-cone technique. The root canal filling quality, the occurrence of sealer extrusion, and apical periodontitis healing were the outcomes of interest. Data were analyzed through chi-square analysis, and the odds ratio for healing was adjusted using a logistic regression model (α = 0.05). RESULTS: No significant differences were observed between the endodontic techniques regarding the root filling quality or sealer extrusion. Six months after treatment, both endodontic techniques presented equivalent results regarding apical periodontitis healing. The healing rate was affected only by the periapical status at baseline. CONCLUSIONS: The obturation of the root canal of the anterior teeth using reciprocating file-matched single cones presented a similar quality to that obtained with manual instrumentation followed by the lateral condensation technique. Similar healing rates of apical lesions were also observed. CLINICAL RELEVANCE: For treating anterior teeth with apical periodontitis, a reciprocating single-file, single-treatment protocol was as effective as a traditional protocol combining hand instrumentation and the lateral compaction obturation technique.
Assuntos
Periodontite Periapical , Materiais Restauradores do Canal Radicular , Preparo de Canal Radicular , Humanos , Periodontite Periapical/terapia , Obturação do Canal Radicular , Tratamento do Canal RadicularRESUMO
O objetivo do presente estudo foi descrever o manejo de um caso clínico de dente com rizogênese incompleta e necrose pulpar, em um paciente do sexo masculino, 13 anos de idade, com histórico de traumatismo dentário nos incisivos centrais superiores. Após diagnóstico clínico e radiográfico, com confirmação de necrose pulpar, os dentes foram submetidos ao procedimento de apicogênese com hidróxido de cálcio e posterior apicificação com agregado trióxido mineral (MTA)e obturação dos canais radiculares com guta-percha. Após acompanhamento de 20 meses, observou-se supressão da sintomatologia dolorosa, ausência de comprometimento periodontal e, radiograficamente, redução da lesão periapical. Aos 60 meses, foi observada manutenção da saúde periodontal e completa cicatrização da lesão periapical. (AU).
Introduction: Immature teeth with pulp necrosis constitute a challenge to endodontic therapy. Our objective was to describe the management of a tooth case of with incomplete rizogenesis and pulp necrosis. Methods: Patient, male, 13-years-old, with a history of dental trauma in the maxillary central incisors. After confirmation of pulp necrosis, the teeth were submitted to calcium hydroxide intracanal and, posteriorly, apicification with MTA and obturation with gutta-percha. Results: After 20-month follow-up, suppression of the pain symptomatology, absence of periodontal impairment and reduction of the periapical lesion were observed. At 60 months, periodontal health maintenance and complete healing of the periapical lesion were confirmed. Conclusion: Association of intracanal calcium hydroxide with MTA in apicification procedure is a viable alternative to the endodontic treatment of non-vital teeth with incomplete rizogenesis (AU).
Assuntos
Humanos , Masculino , Adolescente , Obturação do Canal Radicular , Tratamento do Canal Radicular , Materiais Biocompatíveis , Hidróxido de Cálcio , Necrose da Polpa Dentária , EndodontiaRESUMO
The localization of partial or completed root canal obliteration is a challenging task in endodontic practice. Recently, guided endodontics has become an alternative solution for those cases. Although this technique has already been used clinically in managing anterior teeth, in this report, we describe 3 complex clinical scenarios of calcified root canals of 1 molar and 2 premolars using guided endodontics. The clinical cases reported here show that technological evolutions should make guided endodontic procedures more widespread because their execution is relatively fast and safe even in the case of the upper molar. Additionally, 12-month clinical follow-up visits showed the effectiveness of the guided endodontic procedures.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Calcificações da Polpa Dentária/diagnóstico por imagem , Calcificações da Polpa Dentária/cirurgia , Cavidade Pulpar/diagnóstico por imagem , Cavidade Pulpar/cirurgia , Endodontia/métodos , Maxila , Radiografia Dentária , Tratamento do Canal Radicular/métodos , Cirurgia Assistida por Computador/métodos , Idoso , Dente Pré-Molar , Feminino , Seguimentos , Humanos , Imageamento Tridimensional , Pessoa de Meia-Idade , Dente Molar , Fatores de Tempo , Resultado do TratamentoRESUMO
OBJECTIVE: To quantify Enterococcus faecalis density in root canal dentin after chemomechanical preparation (CMP) using alternated irrigating regimen. METHODOLOGY: Root canals (RC) were contaminated with E. faecalis (ATCC 19433) for 3 weeks and evident biofilms were obtained. After initial sampling (S1), the CMP was aided by irrigants: saline solution (control; n=12), a conventional regimen (CR) (group 1; n=12) using 5.25% NaOCl and a final rinse with 17% EDTA, and an alternating regimen (AR) of intercalated use of NaOCl and EDTA (group 2, n=12), followed by a second sampling (S2). After 2 weeks, S3 was obtained. Two roots were analyzed by scanning electron microscopy. Each root was divided into cervical, mild, and apical segments and sampling of the superficial (n=90) and deep (n=90) dentin layers was obtained using Gates-Glidden burs. The E. faecalis density (CFU/mg) in log10 was categorized as residual (0 > 0.2), moderate (0.2 ≥ 0.5), or elevated (> 0.5). The prevalence of positive samples in BHI and BHI-A was analyzed by Pearson's chi-square test. The data were normalized by a log10 transformation of CFU and were analyzed by one-way ANOVA and Tukey's tests. RESULTS: Biofilms were observed only in the control root canal walls. Topographically, the controls and CR showed similar distributions of E. faecalis in the dentin. Microbiologically positive root canals harbored much E. faecalis in the adjacent dentin (p < 0.05). Irrigating saline provided moderate density of E. faecalis in the dentin while CR and AR resulted in a residual density of microorganisms (p < 0.05). CONCLUSIONS: The Enterococcus faecalis density in dentin was influenced by the irrigating regimen and the microbiological status of the root canal. The CMP aided by the alternating regimen interfered with the recolonization of the root canal and topographic distribution of Enterococcus in root dentin.
Assuntos
Biofilmes/crescimento & desenvolvimento , Dentina/microbiologia , Enterococcus faecalis/crescimento & desenvolvimento , Irrigantes do Canal Radicular/farmacologia , Biofilmes/efeitos dos fármacos , Humanos , Hipoclorito de Sódio/farmacologiaRESUMO
OBJECTIVE: Because the impact of conditioned fear stress on apical bone resorption is unknown, the aim of the current studywas to use a rat model to evaluate the impact of conditioned fear stress on the bone resorption of inflammatory apical periodontitis lesions. METHODS: Twenty-five animals were divided into two groups. They underwent a surgical procedure in the first left lower molar tooth to expose the dental pulp and induce inflammatory apical periodontitis lesions through the retention of contamination (bacterial infection) during a 56-day period. The animals in the case group were stressed daily by using electrical stimuli (1.10 mA), whereas the animals in the control group were absent from the stressful stimuli (shocks). The open field test was performed to validate the stress methodology. The jaws were removed and collected for histological and radiographic analyses. RESULTS: Stressed animals presented increased levels of bone loss and inflammatory cells in the root apex in comparison with the control group (P = 0.0001). However, no radiographic differences were observed between the groups (P > 0.05). CONCLUSIONS: Our results demonstrated that conditioned fear stress could modify a periapical lesion by increasing the size of bone loss there. Conditioned fear stress also increased the total number of inflammatory cells compared with the control group. Studies evaluating the impact of conditioned fear stress on human periapical inflammatory lesions should be encouraged.
Assuntos
Reabsorção Óssea/fisiopatologia , Reabsorção Óssea/psicologia , Condicionamento Operante , Medo , Periodontite Periapical/fisiopatologia , Periodontite Periapical/psicologia , Estresse Psicológico/fisiopatologia , Estresse Psicológico/psicologia , Animais , Masculino , Distribuição Aleatória , Ratos , Ratos WistarRESUMO
Abstract Objective: To evaluate the sealing capacity and retention of apical barriers made with mineral trioxide aggregate (MTA) and Portland cement (PC). Material and Methods: Fifty-six bovine incisors were sectioned 8 mm above and 12 mm below the cement-enamel junction. The root canal was enlarged with a diamond drill to create a standard 2.5 mm diameter opening. Apical sheets of 5 mm thickness were placed using white MTA-Angelus or white PC. Fifteen samples of each material were exposed to human saliva in a dual chamber apparatus and casting was evaluated at 30 days. Samples without apical barriers and fully sealed samples were used as positive and negative controls (n = 3), respectively. Data were analyzed by Fisher's exact test (p<0.05) after 3 periods: 1 to 10 days (P1); days 11 to 20 (P2); and days 21 to 30 (P3). Then, three 1 mm thick sections were obtained at the apical level of other root samples of each material (n = 10) and the push-out test was performed Results: The leakage rates in P1, P2 and P3 were 60%, 73.3% and 100% for the MTA; and 73.3%, 86.7% and 100% for CP, with no significant difference between materials, regardless of the period analyzed. There were no significant differences between the bond strengths for both cements (p>0.05) Conclusion: Mineral trioxide aggregate and Portland cement apical barriers presented similar sealing ability and bond strength values.
Assuntos
Animais , Bovinos , Tratamento do Canal Radicular/instrumentação , Traumatismos Dentários/diagnóstico por imagem , Dentição Permanente , Cavidade Pulpar , Apexificação/instrumentação , Brasil/epidemiologia , Radiografia Dentária/instrumentação , Interpretação Estatística de Dados , Esmalte DentárioRESUMO
This study evaluated the effect of mineral trioxide aggregate (MTA) on the retention of fiber posts in repaired root canal perforations. Ten-millimeter post spaces were prepared in 60 endodontically treated bovine incisors. Root perforations were created in half of the root canals in the cervical area prior to being filled with white MTA-Angelus. Fiber posts were luted into the root canals with two self-adhesive (RelyX Unicem or Set) or self-etching (Panavia F) resin cements. The posts were submitted to a pull-out test, and the data were submitted to two-way ANOVA and Tukey's post hoc tests (α = 0.05). The fiber posts exhibited reduced retention in MTA-repaired root canal perforations, regardless of the type of resin cement that was used (p < 0.001). Self-adhesive resin cements provided higher bond strength values than Panavia F, while no difference was observed between RelyX Unicem and Set (p > 0.05). The presence of MTA in repaired root perforations negatively affected post retention. In addition, self-adhesive cements seemed to be the best option to lute fiber posts within a root canal in these cases.
Assuntos
Compostos de Alumínio/química , Compostos de Cálcio/química , Retenção em Prótese Dentária , Cavidade Pulpar/efeitos dos fármacos , Óxidos/química , Técnica para Retentor Intrarradicular , Materiais Restauradores do Canal Radicular/química , Obturação do Canal Radicular/métodos , Silicatos/química , Animais , Bovinos , Cimentação/métodos , Dentina/efeitos dos fármacos , Combinação de Medicamentos , Teste de Materiais , Microscopia Eletrônica de Varredura , Reprodutibilidade dos Testes , Cimentos de Resina/química , Propriedades de SuperfícieRESUMO
Cyst-like periapical lesions should be treated initially with conservative nonsurgical procedures. In this case series, we describe the clinical and radiographic outcomes of large cyst-like lesions that were treated by orthograde decompression and long-term intracanal use of calcium hydroxide [Ca(OH)2] mixed with 2% chlorhexidine digluconate. Ten cases of cyst-like periapical lesions involving 15 teeth from 10 patients were selected. Maximal radiographic diameters of the lesions ranged from 11 to 28 mm. Nonsurgical procedures were performed, including apical patency, orthograde puncture of cyst-like exudates, chemomechanical preparation, and placement of intracanal Ca(OH)2/CHX dressings, which were periodically replaced during 6-10 months. The root canals were then filled with gutta-percha and sealer. The follow-up periods ranged from 6 to 24 months, and the outcome was classified as healed, healing, or failure. Nine lesions drained copious exudates after canal patency. One lesion only drained bloody serous exudate after periapical overinstrumentation. In 9 patients, intracanal exudation ceased in the first follow-up visit. At the 24-month follow-up, 6 lesions (60.0%) had healed, and 3 lesions (30.0%) were healing, with the corresponding patients being without clinical signs or symptoms. The case of treatment failure was submitted to surgical treatment. Microscopically, the lesion appeared to be an apical cyst with exuberant extraradicular bacterial biofilms attached to the sectioned root apex. This case series supports the use of nonsurgical methods to resolve larger cyst-like periapical lesions.
Assuntos
Anti-Infecciosos Locais/uso terapêutico , Hidróxido de Cálcio/uso terapêutico , Clorexidina/uso terapêutico , Cisto Radicular/terapia , Materiais Restauradores do Canal Radicular/uso terapêutico , Tratamento do Canal Radicular/métodos , Terapia Combinada , Feminino , Guta-Percha/uso terapêutico , Humanos , Masculino , Punções , Cisto Radicular/diagnóstico por imagem , Resultado do Tratamento , Adulto JovemRESUMO
The aim of the present study was to evaluate the bond strength (BS) of root canal fillings to root dentin using the reciprocating file-matched single-cone or lateral compaction techniques with resin-based and calcium-silicate-based sealers. Maxillary canine roots were prepared and filled using one of the following approaches: Reciproc R40 file and R40 single cone, WaveOne Large file and Large single cone, or ProTaper up to F4 file with lateral compaction. The root filling was performed using AH Plus, Epiphany SE or MTA Fillapex (n = 10). Three 1-mm-thick slices were obtained from each third of each root. Two slices were subjected to a push-out test, and the other slices were prepared for scanning electron microscopy (SEM) to examine the dentin-sealer interface. Data (in MPa) from the push-out tests were analyzed using a two-way ANOVA and Tukey's test (p < 0.05). Failure modes (adhesive, cohesive or mixed) were evaluated at ×25 magnification. The single-cone techniques resulted in lower BS values than the lateral compaction technique. For lateral compaction, AH Plus and Epiphany SE showed the highest and lowest BS values, respectively. Slight differences were observed between sealers when the single-cone techniques were used. A tendency to reduce the BS toward the apical third was observed. Adhesive failures were predominant for all experimental conditions. A closer adaption of the filling material on the root dentin was observed for the AH Plus and lateral compaction techniques. The Reciproc and WaveOne techniques were associated with lower BS values than the lateral compaction technique. However, the effect of the root canal filling technique appears to be sealer-dependent.
Assuntos
Colagem Dentária/instrumentação , Materiais Restauradores do Canal Radicular/química , Preparo de Canal Radicular/instrumentação , Compostos de Alumínio/química , Análise de Variância , Compostos de Cálcio/química , Colagem Dentária/métodos , Falha de Restauração Dentária , Dentina/efeitos dos fármacos , Combinação de Medicamentos , Resinas Epóxi/química , Desenho de Equipamento , Humanos , Teste de Materiais , Microscopia Eletrônica de Varredura , Níquel/química , Óxidos/química , Reprodutibilidade dos Testes , Obturação do Canal Radicular/instrumentação , Obturação do Canal Radicular/métodos , Preparo de Canal Radicular/métodos , Silicatos/química , Propriedades de Superfície , Titânio/químicaRESUMO
The aim of this study was to evaluate the influence of drying protocols (DP) on the apical sealing (AS) and on the bond strength (BS) of teeth filled with different sealers. The root canals of one hundred and fifty-six roots of maxillary canines were prepared with Reciproc rotary files (R50). The teeth were randomly divided into four groups (n = 39), according to the DP: GI-paper points; GII-70% isopropyl alcohol + aspiration with NaviTip points; GIII-95% ethanol + paper points; GIV-EndoVac + paper points. Each group was divided into subgroups, according to the sealer used: AH Plus, Sealapex and MTA Fillapex, using a single-cone technique. Evaluation of AS and BS was performed with fluid filtration (FF) and push-out (PO) methods, respectively. The PO test consisted of sectioning the roots, and subjecting a single slice from each third to testing and analysis for failure type. The data was submitted to two-way and three-way variance analysis (ANOVA) and Tukey (α = 5%). The AS showed no drying protocol influence. The FF results revealed a statistically significant difference between MTA and Sealapex (p < 0.05) sealers. The BS test values showed that there was no statistical significant difference among the canal thirds (p > 0.05), but that there was such a difference among the sealers (p < 0.05), among the protocols (p < 0.05), and in the interaction between sealers and protocols (p < 0.05). AH Plus revealed the highest BS values among the sealers; the highest BS results for the sealers occurred with the specimens used with isopropyl alcohol, compared with ethanol and EndoVac.
Assuntos
Compostos de Alumínio/química , Compostos de Cálcio/química , Hidróxido de Cálcio/química , Colagem Dentária/métodos , Resinas Epóxi/química , Óxidos/química , Materiais Restauradores do Canal Radicular/química , Salicilatos/química , Silicatos/química , Adesividade , Análise de Variância , Dentina/efeitos dos fármacos , Combinação de Medicamentos , Humanos , Teste de Materiais , Distribuição Aleatória , Reprodutibilidade dos Testes , Fatores de TempoRESUMO
Abstract The aim of this study was to evaluate the influence of drying protocols (DP) on the apical sealing (AS) and on the bond strength (BS) of teeth filled with different sealers. The root canals of one hundred and fifty-six roots of maxillary canines were prepared with Reciproc rotary files (R50). The teeth were randomly divided into four groups (n = 39), according to the DP: GI-paper points; GII-70% isopropyl alcohol + aspiration with NaviTip points; GIII-95% ethanol + paper points; GIV-EndoVac + paper points. Each group was divided into subgroups, according to the sealer used: AH Plus, Sealapex and MTA Fillapex, using a single-cone technique. Evaluation of AS and BS was performed with fluid filtration (FF) and push-out (PO) methods, respectively. The PO test consisted of sectioning the roots, and subjecting a single slice from each third to testing and analysis for failure type. The data was submitted to two-way and three-way variance analysis (ANOVA) and Tukey (α = 5%). The AS showed no drying protocol influence. The FF results revealed a statistically significant difference between MTA and Sealapex (p < 0.05) sealers. The BS test values showed that there was no statistical significant difference among the canal thirds (p > 0.05), but that there was such a difference among the sealers (p < 0.05), among the protocols (p < 0.05), and in the interaction between sealers and protocols (p < 0.05). AH Plus revealed the highest BS values among the sealers; the highest BS results for the sealers occurred with the specimens used with isopropyl alcohol, compared with ethanol and EndoVac.
Assuntos
Humanos , Óxidos/química , Materiais Restauradores do Canal Radicular/química , Hidróxido de Cálcio/química , Salicilatos/química , Colagem Dentária/métodos , Silicatos/química , Compostos de Cálcio/química , Compostos de Alumínio/química , Resinas Epóxi/química , Fatores de Tempo , Teste de Materiais , Distribuição Aleatória , Adesividade , Reprodutibilidade dos Testes , Análise de Variância , Dentina/efeitos dos fármacos , Combinação de MedicamentosRESUMO
Abstract The aim of the present study was to evaluate the bond strength (BS) of root canal fillings to root dentin using the reciprocating file-matched single-cone or lateral compaction techniques with resin-based and calcium-silicate-based sealers. Maxillary canine roots were prepared and filled using one of the following approaches: Reciproc R40 file and R40 single cone, WaveOne Large file and Large single cone, or ProTaper up to F4 file with lateral compaction. The root filling was performed using AH Plus, Epiphany SE or MTA Fillapex (n = 10). Three 1-mm-thick slices were obtained from each third of each root. Two slices were subjected to a push-out test, and the other slices were prepared for scanning electron microscopy (SEM) to examine the dentin-sealer interface. Data (in MPa) from the push-out tests were analyzed using a two-way ANOVA and Tukey's test (p < 0.05). Failure modes (adhesive, cohesive or mixed) were evaluated at ×25 magnification. The single-cone techniques resulted in lower BS values than the lateral compaction technique. For lateral compaction, AH Plus and Epiphany SE showed the highest and lowest BS values, respectively. Slight differences were observed between sealers when the single-cone techniques were used. A tendency to reduce the BS toward the apical third was observed. Adhesive failures were predominant for all experimental conditions. A closer adaption of the filling material on the root dentin was observed for the AH Plus and lateral compaction techniques. The Reciproc and WaveOne techniques were associated with lower BS values than the lateral compaction technique. However, the effect of the root canal filling technique appears to be sealer-dependent.
Assuntos
Humanos , Materiais Restauradores do Canal Radicular/química , Colagem Dentária/instrumentação , Preparo de Canal Radicular/instrumentação , Óxidos/química , Obturação do Canal Radicular/instrumentação , Obturação do Canal Radicular/métodos , Propriedades de Superfície , Titânio/química , Teste de Materiais , Microscopia Eletrônica de Varredura , Reprodutibilidade dos Testes , Análise de Variância , Colagem Dentária/métodos , Silicatos/química , Compostos de Cálcio/química , Compostos de Alumínio/química , Preparo de Canal Radicular/métodos , Falha de Restauração Dentária , Dentina/efeitos dos fármacos , Combinação de Medicamentos , Resinas Epóxi/química , Desenho de Equipamento , Níquel/químicaRESUMO
Abstract This study evaluated the effect of mineral trioxide aggregate (MTA) on the retention of fiber posts in repaired root canal perforations. Ten-millimeter post spaces were prepared in 60 endodontically treated bovine incisors. Root perforations were created in half of the root canals in the cervical area prior to being filled with white MTA-Angelus. Fiber posts were luted into the root canals with two self-adhesive (RelyX Unicem or Set) or self-etching (Panavia F) resin cements. The posts were submitted to a pull-out test, and the data were submitted to two-way ANOVA and Tukey's post hoc tests (α = 0.05). The fiber posts exhibited reduced retention in MTA-repaired root canal perforations, regardless of the type of resin cement that was used (p < 0.001). Self-adhesive resin cements provided higher bond strength values than Panavia F, while no difference was observed between RelyX Unicem and Set (p > 0.05). The presence of MTA in repaired root perforations negatively affected post retention. In addition, self-adhesive cements seemed to be the best option to lute fiber posts within a root canal in these cases.
Assuntos
Animais , Bovinos , Óxidos/química , Materiais Restauradores do Canal Radicular/química , Obturação do Canal Radicular/métodos , Técnica para Retentor Intrarradicular , Retenção em Prótese Dentária , Silicatos/química , Compostos de Cálcio/química , Compostos de Alumínio/química , Cavidade Pulpar/efeitos dos fármacos , Propriedades de Superfície , Teste de Materiais , Microscopia Eletrônica de Varredura , Reprodutibilidade dos Testes , Cimentação/métodos , Cimentos de Resina/química , Dentina/efeitos dos fármacos , Combinação de MedicamentosRESUMO
INTRODUCTION: Current push-out experimental methods used in endodontic research should be improved. This study introduced a novel dentin push-out bond strength model that uses micro-computed tomography (µCT). METHODS: Roots filled with gutta-percha cones and different resin-based sealers (n = 10) were sectioned transversely to obtain two 2-mm-thick slices per root third. The first slice was subjected to a push-out test by using a material testing stage fitted inside a µCT scanner. The apparatus was scanned before and after the test to evaluate areas of filling material ruptures. The images provided by µCT were also used to generate models for a 3-dimensional finite element analysis. Confocal laser scanning microscopy was used to assess failure modes after the test and to measure interfacial gaps in slices not subjected to push-out. Bond-strength and gap data were statistically analyzed (P < .05). RESULTS: Proper coefficients of variation (average less than 30%) were observed for all the experimental conditions. The finite element analysis helped explain the results of bond strength and root-filling ruptures. A significant, moderate, indirect correlation was observed between the bond strength and gaps. CONCLUSIONS: The micromechanical model with the µCT images resulted in a consistent root-filling bond strength evaluation.