Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Mais filtros











Base de dados
Intervalo de ano de publicação
1.
Water Sci Technol ; 65(8): 1435-40, 2012.
Artigo em Inglês | MEDLINE | ID: mdl-22466590

RESUMO

Metal contaminants are generally removed from effluents by chemical and physical processes which are often associated with disadvantages such as the use of toxic reagents, generation of toxic waste and high costs. Hence, new techniques have been developed, among them the study of natural adsorbents, for instance, the use of Moringa oleifera seeds. The potential of M. oleifera seeds for nickel removal in aqueous systems was investigated. The seeds utilized were obtained from plants grown in Uberlândia/Brazil. After being dried and pulverized, the seeds were treated with 0.1 mol/L NaOH. Fourier transform infrared spectroscopy, scanning electron microscopy and thermogravimetric analyses were used for the characterization of the material. Using the optimized methodology (50 mL of 4.0 mg/L Ni(II), pH range of 4.0-6.0, agitation time of 5 min and adsorption mass of 2.0 g) more than 90% of Ni(II) could be removed from water samples. The sorption data were fitted satisfactorily by the Langmuir adsorption model. Evaluation applying the Langmuir equation gave the monolayer sorption capacity as 29.6 mg/g. The results indicate that this material could be employed in the extraction of nickel, considering its ease of use, low cost and environmental viability, which make it highly attractive for application in developing countries.


Assuntos
Moringa oleifera/química , Níquel/isolamento & purificação , Sementes/química , Poluentes Químicos da Água/isolamento & purificação , Adsorção , Concentração de Íons de Hidrogênio , Termodinâmica
2.
J Autom Methods Manag Chem ; 2011: 464102, 2011.
Artigo em Inglês | MEDLINE | ID: mdl-22013389

RESUMO

In this study, a method for the determination of low concentrations of lead in beer samples using solid-phase extraction with a flow injection analysis system and detection by flame atomic absorption spectrometry (FAAS) was developed. Moringa oleifera seeds were used as a biosorbent material. Chemical and flow variables of the online preconcentration system, such as sample pH, preconcentration flow rate, eluent flow rate, eluent concentration, particle size, and sorbent mass, were studied. The optimum extraction conditions were obtained using a sample pH of 6.0, sample flow rate of 6.0 mL min(-1), 63.0 mg of sorbent mass, and 2.0 mol L(-1) HNO(3) at a flow rate of 2.0 mL min(-1) as the eluent. With the optimized conditions, the preconcentration factor, precision, detection limit, consumption index, and sample throughput were estimated as 93, 0.3% (10.0 µg L(-1), n = 7), 7.5 µg L(-1), 0.11 mL, and 23 samples per hour, respectively. The method developed was successfully applied to beer samples and recovery tests, with recovery ranging from 80% to 100%.

3.
Int J Anal Chem ; 2011: 765746, 2011.
Artigo em Inglês | MEDLINE | ID: mdl-21785595

RESUMO

This paper reports a method for the determination of zinc in Brazilian sugar cane spirit, (cachaça in Portuguese), using solid-phase extraction with a flow injection analysis system and detection by FAAS. The sorbent material used was activated carbon obtained from Moringa oleifera husks. Flow and chemical variables of the proposed system were optimized through multivariate designs. The factors selected were sorbent mass, sample pH, sample flow rate, and eluent concentration. The optimum extraction conditions were obtained using a sample pH of 4.0, a sample flow rate of 6.0 mL min(-1), 30.0 mg of sorbent mass, and 1.0 mol L(-1) HNO(3) as the eluent at a flow rate of 4.0 mL min(-1). The limit of detection for zinc was 1.9 µg L(-1), and the precision was below 0.82% (20.0 µg L(-1), n = 7). The analytical curve was linear from 2 to 50 µg L(-1), with a correlation coefficient of 0.9996. The method developed was successfully applied to spiked Brazilian sugar cane spirit, and accuracy was assessed through recovery tests, with results ranging from 83% to 100%.

4.
Water Sci Technol ; 62(9): 2198-203, 2010.
Artigo em Inglês | MEDLINE | ID: mdl-21045350

RESUMO

Moringa oleifera seeds were investigated as a biosorbent for removing metal ions from aqueous effluents. The morphological characteristics as well as the chemical composition of M. oleifera seeds were evaluated using Fourier Transform Infrared (FT-IR) Spectroscopy, Thermogravimetric Analysis (TGA), X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The FT-IR spectra showed the presence of lipids and protein components. Scanning electron micrographs showed that Moringa seeds have an adequate morphological profile for the retention of metal ions. The results suggest that M. oleifera seeds have potential application in Cd(II), Pb(II), Co(II), Cu(II) and Ag(I) decontamination from aqueous effluents.


Assuntos
Íons/química , Metais/química , Moringa oleifera/química , Sementes/química , Poluentes Químicos da Água/química , Água/química , Adsorção , Eliminação de Resíduos Líquidos/métodos , Purificação da Água/métodos
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA