RESUMO

OBJECTIVE: To assess the in-vitro effect of single applications of CPP-ACP pastes and different fluoridated solutions on the prevention of dental caries around orthodontic brackets. MATERIAL AND METHODS: Tooth/bracket sets (n=65) were immersed in artificial saliva (1h at 37ºC) and randomly subjected to single applications (100µL; 1min) of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP emulsion), CPP-ACP with fluoride (CPP-ACPF emulsion), solutions of titanium tetrafluoride (TiF4) or sodium fluoride (NaF), or no treatment (CG). Multispecies biofilm (5 x 105 CFU/mL) was formed in the presence of 2% sucrose. After 24 h, the pH and the concentration of total soluble fluoride (TSF) were analyzed by culture medium. The presence of active white spot lesions (WSL) evaluated by macroscopic examination and the percent surface mineral loss (%SML) were analyzed. Also, the topography of enamel was detected by analysis of scanning electron microscopy (SEM). The data was assessed by chi-square, Kruskal-Wallis, and Mann-Whitney tests (p < 0.05). RESULTS: Fluoride-containing compounds led to a smaller pH reduction than did CPP-ACP and CG (p<0.05). There was difference in TSF between the groups (p<0.05), denoted as TiF4> NaF > CPP-ACPF > CPP-ACP > CG. Regarding the presence of WSL and %SML, the NaF group obtained lower values (p<0.05), while TiF4 and CPP-ACPF were similar (p>0.05). SEM demonstrated that fluoride-free groups had a larger surface dissolution. CONCLUSION: Fluoridated groups including solutions and CPP-ACPF were more effective than CPP-ACP in reducing enamel demineralization around orthodontic brackets after a single application.

Assuntos

RESUMO

ABSTRACT Objective: To assess the in-vitro effect of single applications of CPP-ACP pastes and different fluoridated solutions on the prevention of dental caries around orthodontic brackets. Material and Methods: Tooth/bracket sets (n=65) were immersed in artificial saliva (1h at 37ºC) and randomly subjected to single applications (100µL; 1min) of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP emulsion), CPP-ACP with fluoride (CPP-ACPF emulsion), solutions of titanium tetrafluoride (TiF4) or sodium fluoride (NaF), or no treatment (CG). Multispecies biofilm (5 x 105 CFU/mL) was formed in the presence of 2% sucrose. After 24 h, the pH and the concentration of total soluble fluoride (TSF) were analyzed by culture medium. The presence of active white spot lesions (WSL) evaluated by macroscopic examination and the percent surface mineral loss (%SML) were analyzed. Also, the topography of enamel was detected by analysis of scanning electron microscopy (SEM). The data was assessed by chi-square, Kruskal-Wallis, and Mann-Whitney tests (p < 0.05). Results: Fluoride-containing compounds led to a smaller pH reduction than did CPP-ACP and CG (p<0.05). There was difference in TSF between the groups (p<0.05), denoted as TiF4> NaF > CPP-ACPF > CPP-ACP > CG. Regarding the presence of WSL and %SML, the NaF group obtained lower values (p<0.05), while TiF4 and CPP-ACPF were similar (p>0.05). SEM demonstrated that fluoride-free groups had a larger surface dissolution. Conclusion: Fluoridated groups including solutions and CPP-ACPF were more effective than CPP-ACP in reducing enamel demineralization around orthodontic brackets after a single application.

RESUMO Objetivo: Avaliar in-vitro o efeito de uma aplicação única de cremes dentais de CPP-ACP e diferentes soluções fluoretadas na prevenção da cárie dentária ao redor de braquetes ortodônticos Material e Métodos: O conjunto dentes/braquetes (n=65) foi imerso em saliva artificial (1h em 37°C) randomizado e submetido a tratamento único (100µL; 1 min) de emulsão de fosfopeptídeo de caseína-fosfato de cálcio amorfo (CPP-ACP) e CPP-ACP associado ao flúor (CPP-ACPF); soluções de tetrafluoreto de titânio (TiF4) e fluoreto de sódio (NaF); e ausência de tratamento (GC). Biofilmes multiespécie (5 x 105 CFU/mL) foram formados na presença de sacarose a 2%. Após 24h, o pH e a concentração de fluoreto solúvel total (FST) foram analisados pelo meio de cultura. Foram avaliadas a presença de lesões de mancha branca (LMB), por meio da análise de macroscopia visual, e a porcentagem de perda de dureza (%PD). Também foi verificada a topografia do esmalte, usando microscopia eletrônica de varredura (MEV). Os dados foram analisados pelos testes Qui-quadrado, Kruskal-Wallis e Mann-Whitney (p < 0,05). Resultados: Os compostos contendo flúor levaram a uma redução do pH menor do que o CPP-ACP e GC (p<0,05). Houve diferença no FST entre os grupos (p <0,05), sendo TiF4> NaF > CPP-ACPF > CPP-ACP > GC. Quanto à presença de LMB e à %PD, o grupo NaF obteve os menores valores (p<0,05), enquanto TiF4 e CPP-ACPF foram semelhantes (p> 0,05). A MEV demonstrou que os grupos sem flúor tiveram uma dissolução superficial maior. Conclusão: Os grupos fluoretados, incluindo soluções e CPP-ACPF, foram mais eficazes do que o CPP-ACP sem flúor na redução da desmineralização do esmalte ao redor dos braquetes ortodônticos após uma única aplicação.

RESUMO

This study aimed to evaluate the in vitro effect of a single application of experimental nanocomposite solutions on the prevention of dental caries around orthodontic brackets. The specimens were exposed to mesoporous silica (MS) nanocomposites containing fluoride by association with titanium tetrafluoride (TiF4) or sodium fluoride (NaF). Nanocomposites also could contain calcium and groups were described as MSCaTiF4, MSTiF4, MSCaNaF, MSNaF, and controls (TiF4, and NaF). Specimens were subjected to the formation of a multispecies biofilm to generate a cariogenic challenge. After 24h, both pH and total soluble fluoride concentration of the culture medium were assessed. Mineral loss was evaluated by percentage of surface mineral loss (%SML), mineral volume variation (ΔZ) of inner enamel and polarized light microscopy (PL). Linear (Ra) and volumetric (Sa) surface roughness and scanning electronic microscopy (SEM) were used to assess enamel topography. Statistical analyses were conducted considering p<0.05. MSNaF had the highest value of culture medium pH after cariogenic challenge, similarly to MSTiF4. All nanocomposite solutions released less fluoride than their controls NaF and TiF4 (p<0.05). All nanocomposite solutions presented lower %SML compared to their respective control groups (p<0.05). Lower Ra, Sa and ΔZ were observed for experimental groups compared to TiF4 (p<0.05). The results were confirmed by PL and SEM analysis. The experimental nanocomposite solutions contributed for lower enamel demineralization around orthodontic brackets.

Assuntos

RESUMO

Abstract This study aimed to evaluate the in vitro effect of a single application of experimental nanocomposite solutions on the prevention of dental caries around orthodontic brackets. The specimens were exposed to mesoporous silica (MS) nanocomposites containing fluoride by association with titanium tetrafluoride (TiF4) or sodium fluoride (NaF). Nanocomposites also could contain calcium and groups were described as MSCaTiF4, MSTiF4, MSCaNaF, MSNaF, and controls (TiF4, and NaF). Specimens were subjected to the formation of a multispecies biofilm to generate a cariogenic challenge. After 24h, both pH and total soluble fluoride concentration of the culture medium were assessed. Mineral loss was evaluated by percentage of surface mineral loss (%SML), mineral volume variation (ΔZ) of inner enamel and polarized light microscopy (PL). Linear (Ra) and volumetric (Sa) surface roughness and scanning electronic microscopy (SEM) were used to assess enamel topography. Statistical analyses were conducted considering p<0.05. MSNaF had the highest value of culture medium pH after cariogenic challenge, similarly to MSTiF4. All nanocomposite solutions released less fluoride than their controls NaF and TiF4 (p<0.05). All nanocomposite solutions presented lower %SML compared to their respective control groups (p<0.05). Lower Ra, Sa and ΔZ were observed for experimental groups compared to TiF4 (p<0.05). The results were confirmed by PL and SEM analysis. The experimental nanocomposite solutions contributed for lower enamel demineralization around orthodontic brackets.

RESUMO Este estudo teve como objetivo avaliar o efeito in vitro de uma única aplicação de soluções experimentais de nanocompósitos na prevenção de cárie dentária em braquetes ortodônticos. Os espécimes foram expostos a nanocompósitos de sílica mesoporosa (MS) contendo fluoreto por associação com tetrafluoreto de titânio (TiF4) ou fluoreto de sódio (NaF). Os nanocompósitos também podem conter cálcio e os grupos foram descritos como MSCaTiF4, MSTiF4, MSCaNaF, MSNaF e controles (TiF4 e NaF). Os espécimes foram submetidos à formação de um biofilme multiespécie para gerar um desafio cariogênico. Após 24h, o pH e a concentração de flúor solúvel total do meio de cultura foram avaliados. A perda mineral foi avaliada pela porcentagem de perda mineral superficial (% SML), variação do volume mineral (ΔZ) do esmalte interno e microscopia de luz polarizada (PL). A rugosidade superficial linear (Ra) e volumétrica (Sa) e a microscopia eletrônica de varredura (MEV) foram utilizadas para avaliar a topografia do esmalte. As análises estatísticas foram realizadas considerando p <0,05. MSNaF apresentou o maior valor de pH do meio de cultura após o desafio cariogênico, semelhante ao MSTiF4. Todas as soluções de nanocompósitos liberaram menos flúor do que seus controles NaF e TiF4 (p <0,05). Todas as soluções de nanocompósitos apresentaram% SML menor em comparação com seus respectivos grupos de controle (p <0,05). Ra, Sa e ΔZ menores foram observados para os grupos experimentais em comparação ao TiF4 (p <0,05). Os resultados foram confirmados por análises PL e SEM. As soluções experimentais de nanocompósitos contribuíram para a menor desmineralização do esmalte ao redor dos braquetes ortodônticos.

Assuntos

RESUMO

ABSTRACT Objective: To evaluate the prevalence of caries stages and interventions on first permanent molars (FPM) in Brazilian children. Material and Methods: Data from FPM were extracted from dental records of children aged 5-14 years of age that attended the UERJ Pediatric Dentistry Clinic. Data include patient age, sex, biofilm index, presence of carious lesions in all stages, and the treatments. Data was analyzed using the SPSS® 20.0 program. Results: A total of 158 dental records were analyzed, 587 registers were related to the caries stage and 601 related to the interventions; mean age of 8.26 (±1.4 years) and 53.2% were girls. The prevalence of active/inactive white spot(AWS/IWS) varied from 14.3% to 21.6% in right upper and lower left FPM, respectively. Enamel/dentin lesions without pulp involvement were also more prevalent in the lower arch and ranged from 3.4% for the right upper to 11.5% for the lower right FPM. Cavities with pulp involvement or indicated extraction ranged from 0% to 1.4%. Treatment included dental sealants, varying from 17.1 to 24.0% (n=126) and restorations, varying from 1.3 to 11.8% (n=38). The lower right were the most affected teeth. Conclusion: First permanent molars presented a higher prevalence of dental caries in early stages and the most prevalent treatment was related to the initial carious process, fluor therapy and sealants.

Assuntos

RESUMO

Introduction: Alagille syndrome (AGS) is an autosomal dominant disease with variable expressiveness that can affect the liver, heart, kidneys, blood vessels, eyes, face and skeleton. Objective: To describe a case of a pediatric patient with Alagille syndrome. Case report: The family history was negative for even the mildest manifestations of AGS. Clinically, the patient had a triangular face, hypertelorism, short philtrum and flat midface. Intraoral examination revealed the absence of the permanent upper lateral incisors, enamel hypoplasia and agreenish color in some teeth, gingival hyperplasia, retention of two primary lower incisors, presence of a supernumerary tooth, and a pediculated nodule of soft tissue on the lingual aspect of the left permanent mandibular first molar. Results: The dental treatment required the extraction of the retained primary teeth and the supernumerary tooth, excisional biopsy and histopathological examination of the lesion were performed and also application of topical fluoride. Also dietary and oral hygiene instructions were given. Conclusion: Currently, the patient makes frequent follow-up visits to monitor the dental development.

Introdução: A síndrome de Alagille (AGS) é uma doença autossômica dominante com expressividade variável que podem afetar o fígado, coração, rins, vasos sanguíneos, olhos, rosto e esqueleto. Objetivo: Descrever um caso de um paciente pediátrico com síndrome de Alagille. Relato do caso: A história familiar era negativa até mesmo para as manifestações mais leves de AGS. Clinicamente, o paciente apresentava face triangular, hipertelorismo, filtro curto e face média plana. O exame intraoral revelou ausência dos incisivos laterais superiores permanentes, hipoplasia de esmalte e aspecto esverdeado em alguns dentes, hiperplasia gengival, retenção de dois incisivos inferiores decíduos, presença de um dente supranumerário, e um nódulo de tecido mole pediculado na face lingual do primeiro molar inferior permanente esquerdo. Resultados: O tratamento odontológico exigiu a extração dos dentes decíduos retidos e do dente supranumerário, biópsia excisional e exame histopatológico da lesão além da aplicação de fluoreto tópico. Também foi realizada instrução dietética e de higiene oral. Conclusão: Atualmente, o paciente faz visitas de acompanhamento frequentes para monitorar o desenvolvimento dentário.

Assuntos

RESUMO

Evaluated the effect of CPP-ACP/NaF and xylitol/NaF varnishes in reduce erosion and progression of erosion. Forty enamel blocks were divided into four groups (n=10): G1=CPP-ACP/NaF varnish (MI varnishTM); G2=xylitol/NaF varnish (Profluorid®); G3=NaF varnish (Duraphat®, positive control) and G4=deionized water (MilliQ®, negative control). Samples were immersed in Sprite ZeroTM (pH 2.58, 4x/day, 3 days), in between immersions, the specimens stayed in artificial saliva. After 3 days of erosion, the eroded area was divided in two (half of one received an additional varnish layer while the other half repeated the same 3-day erosion cycle). The 3D, non-contact profilometry technique was used to determinate tooth structure loss (TSL) and surface roughness (SR). Scanning electron microscopy (SEM) and 3D images were utilized to evaluate the topography of the samples. Mann-Whitney, one-way ANOVA and Tukey tests were used (significance level of 0.05%). SEM and 3D images were descriptively evaluated. After 3 or 6 days of erosion, all tested varnishes were better than G4 (p<0.05) for TSL and SR. In addition, G1 had lower values for TSL than G3 (p<0.05) after 3 days of erosion. Under SEM and 3D images observation, all groups presented porosity, irregularities and depressions on the surface enamel after 3 and 6 days of erosion, more pronounced in G4. An application of topical NaF varnishes was effective in reducing TSL and enamel roughness after erosion challenges, being the CCP-ACP/NaF varnish more effective than NaF varnish and water after 3 days of erosion.

Assuntos

RESUMO

O processo de identificação humana envolve uma comparação de dados de um corpo que pode variar desde integridade corporal a graus avançados de destruição, como esqueletização, carbonização ou fragmentação. A partir dos dados disponíveis nos remanescentes encontrados, inicia-se uma busca por informações ante mortem de pessoas desaparecidas. O presente trabalho busca demonstrar a importância do prontuário odontológico no processo de identificação humana, pela riqueza de informações, e unicidade da arcada dentária. O arquivamento do prontuário para toda a vida do profissional tem seu fundamento legal no Código de Defesa do Consumidor. Um prontuário bem elaborado, organizado e arquivado, pode fazer a diferença entre identificar ou não um indivíduo. Este arquivamento, bem como o trabalho bem desenvolvido do odontolegista no processo de identificação do indivíduo falecido, constitui um serviço para o bem da população viva,isto é, para a família deste indivíduo, que não fará parte da estatística dos desaparecidos. Os documentos que compõem o prontuário odontológico são cruciais para a eficácia na identificação humana e possuem valor ético e jurídico.

Human identification involves comparing data from a body, ranging from structural integrity to advanced degrees of destruction, such as skeletonization, carbonization, or fragmentation. Data available in remains found trigger a search for ante-mortem information on missing persons. This work aims to demonstrate the importance of dental records in the human identification process, considering the richness of information within them and the uniqueness of human dental arches. The lifetime archiving of dental records has its legal basis in Brazil's Consumer Protection Code. However, we seek to demonstrate how a well-designed, organized, and filed medical record may play a key role in identifying or not an individual. The well-performed filing and forensic activity work in the identification process is a service for the living population; that is, for the family of the deceased individual who, if not identified, will be part of the missing persons statistics. Documents comprising dental records are fundamental for effective human identification, besides having ethical and legal value.

RESUMO

The aim of this study was to assess the effect of a newly developed nanocomplex formed of hydroxypropyl-b-cyclodextrin and 1% titanium tetrafluoride (TiF4) after distinct complexation periods (12/72 h) on demineralization of bovine enamel in vitro. Enamel blocks (n=60) were allocated in different groups: Mili-Q water, hydroxypropyl-b-cyclodextrin, 1% TiF4, hydroxypropyl-b-cyclodextrin + 1% TiF4 after 12 h of complexation and hydroxypropyl-b-cyclodextrin + 1% TiF4 after 72 h of complexation. The samples were evaluated by surface microhardness, cross-sectional microhardness and micro-CT. Scanning electron microscopy and energy dispersive X-ray spectrometry (SEM/EDX) were also obtained. Hydroxypropyl-b-cyclodextrin + 1% TiF4 after 12 h complexation resulted in lower percentage of surface microhardness loss compared to Mili-Q water, hydroxypropyl-b-cyclodextrin, 1% TiF4 and hydroxypropyl-b-cyclodextrin + 1% TiF4 after 72 h of complexation group, with a large effect size (from 1.307 to 2.943) and high power (84.9 to 99%). All groups resulted in similar integrated mineral loss (ΔZ) obtained by both internal microhardness and micro-CT techniques. Enamel treated with TiF4 and TiF4 + hydroxypropyl-b-cyclodextrin groups showed a TiO2 glaze-layer, while EDX evaluation identified Ti. The solution containing the inclusion complex of hydroxypropyl-b-cyclodextrin + TiF4 with 12 h of complexation period demonstrated a significant ability to reduce surface demineralization of sound enamel under an artificial cariogenic challenge.

Assuntos

RESUMO

Abstract The aim of this study was to assess the effect of a newly developed nanocomplex formed of hydroxypropyl-b-cyclodextrin and 1% titanium tetrafluoride (TiF4) after distinct complexation periods (12/72 h) on demineralization of bovine enamel in vitro. Enamel blocks (n=60) were allocated in different groups: Mili-Q water, hydroxypropyl-b-cyclodextrin, 1% TiF4, hydroxypropyl-b-cyclodextrin + 1% TiF4 after 12 h of complexation and hydroxypropyl-b-cyclodextrin + 1% TiF4 after 72 h of complexation. The samples were evaluated by surface microhardness, cross-sectional microhardness and micro-CT. Scanning electron microscopy and energy dispersive X-ray spectrometry (SEM/EDX) were also obtained. Hydroxypropyl-b-cyclodextrin + 1% TiF4 after 12 h complexation resulted in lower percentage of surface microhardness loss compared to Mili-Q water, hydroxypropyl-b-cyclodextrin, 1% TiF4 and hydroxypropyl-b-cyclodextrin + 1% TiF4 after 72 h of complexation group, with a large effect size (from 1.307 to 2.943) and high power (84.9 to 99%). All groups resulted in similar integrated mineral loss (ΔZ) obtained by both internal microhardness and micro-CT techniques. Enamel treated with TiF4 and TiF4 + hydroxypropyl-b-cyclodextrin groups showed a TiO2 glaze-layer, while EDX evaluation identified Ti. The solution containing the inclusion complex of hydroxypropyl-b-cyclodextrin + TiF4 with 12 h of complexation period demonstrated a significant ability to reduce surface demineralization of sound enamel under an artificial cariogenic challenge.

Resumo O objetivo deste estudo foi avaliar o efeito da 1-etil-3- (3-dimetilaminopropil) carbodiimida (EDC) na resistência de união de pinos de fibra de vidro em canais radiculares obturados com diferentes cimentos endodônticos. Setenta e oito pré-molares inferiores foram obturados com três cimentos endodônticos (n=26): Endofill (END), AH Plus (AHP) e Endosequence BC Sealer (EBS). Após o preparo do espaço para pino, dois subgrupos formaram-se conforme a cimentação dos pinos (n=13): com EDC e sem EDC (controle - CON). Os espécimes foram submetidos ao teste pull-out, classificação do modo de falha e avaliação da superfície do canal radicular por microscopia eletrônica de varredura após o deslocamento. Quanto à força de resistência de união, uma diferença estatisticamente significativa ocorreu entre os subgrupos EDC e CON apenas no END (p=0,001). Não foi detectada diferença entre os subgrupos CON (p=0,339). Contudo, no subgrupo EDC, o AHP apresentou maiores valores (END versus AHP: p=0,001; AHP versus EBS: p=0,016). Acerca da classificação dos modos de falha, o escore 1 (≥50% de cimento) foi o mais comumente observado, exceto para END + EDC. Restos de cimentos endodônticos e cimentos resinosos foram encontrados no terço cervical, mas sem diferença estatística (p=0,269), enquanto no terço médio, houve diferença (p=0,004). Em conclusão, o EDC diminui a resistência de união quando associado ao cimento END, sem alterar o modo de falha entre o cimento resinoso e o pino de fibra de vidro. O melhor desempenho foi observado quanto o EDC foi usado com o cimento AHP.

Assuntos

RESUMO

Objective There is increasingly common the consumption more times a day of foods and acidic drinks in the diet of the population. The present study aimed to evaluate and compare the effects of a calcium mesoporous silica nanoparticle single application of other calcium and/or fluoride products in reducing the progression of dental erosion. Methodology Half of the eroded area was covered of 60 blocks of enamel, after which the block was submitted to the following treatments: (Ca2+-MSN), casein phosphopeptide-amorphous calcium phosphate (CPP-ACP); CPP-ACP/F-(900 ppm F-); titanium tetrafluoride (TiF4 1%) (positive control); sodium fluoride (NaF 1.36%) (positive control); and Milli-Q® water (negative control) before being submitted to a second erosive challenge. A surface analysis was performed via a three-dimensional (3D) noncontact optical profilometry to assess the volumetric roughness (Sa) and tooth structure loss (TSL) and and through scanning electron microscopy (MEV). An analysis of variance (ANOVA) and Tukey's test were performed. Results Regarding Sa, all experimental groups exhibited less roughness than the control (p<0.05). The TSL analysis revealed that the Ca2+-MSN and NaF groups were similar (p>0.05) and more effective in minimizing tooth loss compared with the other groups (p<0.05). Conclusions The Ca2+-MSN and NaF treatments were superior compared with the others and the negative control.

Assuntos

RESUMO

The aim of this study was to compare the effects of a single application of a new calcium mesoporous silica nanoparticle (Ca2+-MSN) versus other calcium and/or fluoride products against dental erosion. Enamel blocks were half-covered and assigned to six groups (n = 10): Ca2+-MSNs; casein phosphopeptide-amorphous calcium phosphate mousse (CPP-ACP); CPP-ACP/F- (900 ppm F-); titanium tetrafluoride (TiF4 1%); sodium fluoride (NaF 1.36%); and Milli-Q® water (negative control). A single application for each product was completed on the exposed areas of the blocks and were submitted to an erosive challenge. Differences in volumetric roughness (Sa), and tooth structure loss (TSL) by use of three-dimensional noncontact optical profilometry were evaluate. Scanning electron microscopy (SEM) was performed. Analysis of variance and Tukey's test for Sa and the Kruskal-Wallis and Mann-Whitney U tests (p< 0.05) for TSL, respectively. Results: When evaluating Sa, all products presented differences in roughness when compared with the control group (p< 0.05) but not with each other (p > 0.05). However, when analyzing the TSL, it was observed that Ca2+-MSNs, TiF4, and NaF were more effective in preventing dental erosion versus CPP-ACP, CPP-ACP/F-, and Milli-Q® water (p< 0.05). In the SEM images, the negative control presented the worst loss of dental structure, with more porous enamel. Ca2+-MSNs were as effective as TiF4 and NaF to reduce the tooth structure loss.

Assuntos

RESUMO

OBJECTIVES: The aim of this study was to assess the in vitro caries preventive effect of nanocomplexed solutions of hydroxypropyl-ß-cyclodextrin and γ-cyclodextrin associated with titanium tetrafluoride (TiF4) after different complexation times (12 or 72 h). MATERIALS AND METHODS: Enamel blocks were randomly distributed in 9 groups (n = 11): negative control, hydroxypropyl-ß-cyclodextrin, γ-cyclodextrin, TiF4, hydroxypropyl-ß-cyclodextrin:TiF4 12 h, hydroxypropyl-ß-cyclodextrin:TiF4 72 h, γ-cyclodextrin:TiF4 12 h, γ-cyclodextrin:TiF4 72 h, and NaF (positive control). The solutions were applied for 1 min and the blocks were exposed to a biofilm model. Nanocompounds were characterized by differential scanning calorimetry and X-ray powder diffraction. The percentage of surface microhardness loss (%SML), mineral density changes (ΔZ), lesion depth, surface morphology (scanning electron microscopy-SEM), and chemical characterization (energy-dispersive spectroscopy-EDS) were assessed. RESULTS: No oxidation was observed, and the formation of the nanocomplexes was evidenced by changes in the melting point compared to pure cyclodextrins and the loss of crystallinity of the materials. Hydroxypropyl-ß-cyclodextrin:TiF4 72 h resulted in lower %SML than negative control, hydroxypropyl-ß-cyclodextrin, γ-cyclodextrin, and TiF4 (p < 0.05). NaF differed from all groups (p < 0.05), except for hydroxypropyl-ß-cyclodextrin:TiF4 72 h (p = 0.83). ΔZ of hydroxypropyl-ß-cyclodextrin:TiF4 72 h was higher than negative control, hydroxypropyl-ß-cyclodextrin, γ-cyclodextrin, γ-cyclodextrin:TiF4 1 2 h, γ-cyclodextrin:TiF4 72 h, and NaF (p < 0.05) and similar to TiF4 and hydroxypropyl-ß-cyclodextrin:TiF4 12 h (p > 0.05). SEM/EDS detected Ti in the blocks subjected to TiF4-products. CONCLUSION: The hydroxypropyl-ß-cyclodextrin:TiF4 72 h solution showed caries preventive effect on the surface and subsurface of the enamel. CLINICAL RELEVANCE: A hydroxypropyl-ß-cyclodextrin nanosystem, in association with TiF4 after 72 h of complexation, may be a promising agent for the prevention of enamel demineralization.

Assuntos

RESUMO

Abstract The aim of this study was to compare the effects of a single application of a new calcium mesoporous silica nanoparticle (Ca2+-MSN) versus other calcium and/or fluoride products against dental erosion. Enamel blocks were half-covered and assigned to six groups (n = 10): Ca2+-MSNs; casein phosphopeptide-amorphous calcium phosphate mousse (CPP-ACP); CPP-ACP/F− (900 ppm F−); titanium tetrafluoride (TiF4 1%); sodium fluoride (NaF 1.36%); and Milli-Q® water (negative control). A single application for each product was completed on the exposed areas of the blocks and were submitted to an erosive challenge. Differences in volumetric roughness (Sa), and tooth structure loss (TSL) by use of three-dimensional noncontact optical profilometry were evaluate. Scanning electron microscopy (SEM) was performed. Analysis of variance and Tukey's test for Sa and the Kruskal-Wallis and Mann-Whitney U tests (p< 0.05) for TSL, respectively. Results: When evaluating Sa, all products presented differences in roughness when compared with the control group (p< 0.05) but not with each other (p > 0.05). However, when analyzing the TSL, it was observed that Ca2+-MSNs, TiF4, and NaF were more effective in preventing dental erosion versus CPP-ACP, CPP-ACP/F−, and Milli-Q® water (p< 0.05). In the SEM images, the negative control presented the worst loss of dental structure, with more porous enamel. Ca2+-MSNs were as effective as TiF4 and NaF to reduce the tooth structure loss.

Resumo O objetivo deste estudo foi comparar os efeitos de uma única aplicação de uma nova nanopartícula de sílica mesoporosa de cálcio (Ca2+ -MSN) versus outros produtos à base de cálcio e / ou fluoreto contra a erosão dentária. Blocos de esmalte foram parcialmente cobertos e distribuídos em seis grupos (n = 10): Ca2+ -MSNs; fosfopeptídeos de caseína/fosfato de cálcio amorfo (CPP-ACP); CPP-ACP / F- (900 ppm F-); tetrafluoreto de titânio (TiF4 1%); fluoreto de sódio (NaF 1,36%); e água Milli-Q® (controle negativo). Uma única aplicação para cada produto foi realizada nas áreas expostas dos blocos e submetida a desafio erosivo. Diferenças na rugosidade volumétrica (Sa) e na perda de estrutura dentária (TSL) por meio de perfilometria tridimensional de não contato foram avaliadas. Microscopia eletrônica de varredura (MEV) foi realizada. Foram realizadas análise de variância e teste de Tukey para os testes Sa e Kruskal-Wallis e Mann-Whitney (p<0,05) para TSL, respectivamente. Na avaliação de Sa, todos os produtos apresentaram diferenças de rugosidade quando comparados ao grupo controle (p<0,05), mas não entre si (p> 0,05). No entanto, ao analisar o TSL, observou-se que Ca2+ -MSNs, TiF4 e NaF foram mais eficazes na prevenção da erosão dental versus CPP-ACP, CPP-ACP / F- e Milli-Q® (p<0,05). Nas imagens de MEV, o controle negativo apresentou a pior perda de estrutura dentária, com o esmalte mais poroso. A Ca2+ -MSNs foi tão eficaz quanto o TiF4 e o NaF para reduzir a perda da estrutura dentária.

Assuntos

RESUMO

Abstract Objective There is increasingly common the consumption more times a day of foods and acidic drinks in the diet of the population. The present study aimed to evaluate and compare the effects of a calcium mesoporous silica nanoparticle single application of other calcium and/or fluoride products in reducing the progression of dental erosion. Methodology Half of the eroded area was covered of 60 blocks of enamel, after which the block was submitted to the following treatments: (Ca2+-MSN), casein phosphopeptide-amorphous calcium phosphate (CPP-ACP); CPP-ACP/F-(900 ppm F−); titanium tetrafluoride (TiF4 1%) (positive control); sodium fluoride (NaF 1.36%) (positive control); and Milli-Q® water (negative control) before being submitted to a second erosive challenge. A surface analysis was performed via a three-dimensional (3D) noncontact optical profilometry to assess the volumetric roughness (Sa) and tooth structure loss (TSL) and and through scanning electron microscopy (MEV). An analysis of variance (ANOVA) and Tukey's test were performed. Results Regarding Sa, all experimental groups exhibited less roughness than the control (p<0.05). The TSL analysis revealed that the Ca2+-MSN and NaF groups were similar (p>0.05) and more effective in minimizing tooth loss compared with the other groups (p<0.05). Conclusions The Ca2+-MSN and NaF treatments were superior compared with the others and the negative control.

Assuntos

RESUMO

Abstract Objective: To evaluate the topography and microhardness of composite resin restorations submitted to different finishing and polishing systems before and after erosive challenge. Material and Methods: Thirty standardized cavities prepared in enamel-dentin blocks of bovine incisors were restored with Z350 composite resin, and randomly distributed into three groups (n=10) according to the finishing and polishing systems: G1 = Soflex 4 steps, G2 = Soflex Spiral 2 steps and G3 = PoGo (single step). The specimens were half protected with nail varnish and submitted to five immersions in Pepsi Twist®, for 10 minutes each, five times/day during six consecutive days. The initial and final challenge surface microhardness (SMHinitial and SMHfinal) of the composite resin was evaluated and the percentage of SMH loss (%SMHL) was calculated. After protection removal, the topographic change linear (Ra) and volumetric (Sa) roughness was evaluated in initial and final areas by using 3D non-contact optical profilometry and scanning electron microscopy (SEM). Data were analyzed by paired Student's t-test, Kruskal-Wallis test, and by ANOVA and Tukey's test. Results: There was significant intra-group %SMHL in composite resin (p<0.05). Differences among groups in %SMHL, Ra/Sa in resin composite were not observed (p>0.05). SEM images revealed structural changes between the initial and final surfaces for all groups. Conclusion: The three types of finishing and polishing systems had a similar influence on %SMHL, Ra and Sa in the nanofilled composite resin.

Assuntos

RESUMO

Abstract Objective: To evaluate the effect of a calcium nanocompound on the reduction of erosive tooth wear and abrasion. Material and Methods: Bovine enamel specimens (BE), were randomly assigned to the following groups (n = 10): G1 = Calcium mesoporous silica nanoparticles (Ca2+MSNs); G2 = casein phosphopeptide-amorphous calcium phosphate (CPP-ACP, 2% CPP-ACP, GC®); G3 = casein phosphopeptide-amorphous calcium fluoride phosphate (CPP-ACFP, 2% CPP-ACP + 900 ppm F-, GC®); G4 = sodium fluoride NaF (900 ppm F-, positive control); and G5 = distilled and deionized water (negative control). Each product was applied to the exposed area for one minute, three times per day for three consecutive days, and followed by the immersion of the specimens in Sprite Zero™ - a low-pH solution (2.58) for five minutes (Coca-Cola™). After the first and last erosive challenges of the day, the specimens were submitted to abrasion in a toothbrush machine for 15 seconds (200 g/BE). The specimens were analysed using 3D non-contact optical profilometry, with tooth structure loss (TSL) measurements and scanning electron microscopy (SEM). TSL values were analysed by Kruskal-Wallis and Mann-Whitney tests (p<0.05). Results: There were no significant differences between G1 (10.95 µm) and G3 (10.80 µm) treatments for TSL values; however both resulted in significantly reduced TSL values compared with the G5 (16.00 µm) (p<0.05). The G4 (12.26 µm) showed no statistically significant difference when compared to the G5 (16.00 µm). The groups G1 and G3 presented higher surface preservation than the G5. Conclusion: Ca2+MSNs was effective for reducing tooth surface loss caused by erosive tooth wear and abrasion.

Assuntos

RESUMO

Objective: The aim of this article was to describe a case of Robinow syndrome in a pediatric patient. Case Report: Clinically, the patient had frontal bossing, flat facial profile with macrocephaly, midfacial hypoplasia, hypertelorism, wide palpebral fissures, triangular mouth, short upturned nose, short philtrum, ankyloglossia, prolonged retention of primary teeth and abnormal aligment of teeth. The radiographic exams indicated the presence of three impacted permanent supernumerary teeth, agenesis of eight permanent teeth and dental root shortening of all permanent teeth. The treatment proposed was the extraction of all retained primary teeth and the supernumerary teeth, dietary and oral hygiene instructions and orthodontic treatment. Also, important aspects to avoid complications associated with Robinow syndrome were discussed. Conclusion: This case describes uncommon oral findings and some important aspects to avoid complications associated with the Robinow syndrome. Early professional advice, treatment, and periodical follow-ups can improve the quality of life of these patients.

Objetivo: O objetivo deste artigo foi descrever um caso de síndrome de Robinow em um paciente pediátrico. Relato de Caso: Clinicamente, o paciente apresentava bossas frontais, perfil facial plano com macrocefalia, hipoplasia da face média, hipertelorismo, fissuras palpebrais amplas, boca triangular, nariz curto, filtro curto, anquiloglossia, retenção prolongada de dentes decíduos e dentes desalinhados. Os exames radiográficos indicaram a presença de três elementos supranumerários permanentes impactados, agenesia de oito dentes permanentes e encurtamento radicular de todos os dentes permanentes. O tratamento proposto foi a extração de todos os dentes decíduos retidos e os elementos supranumerários, instruções de higiene bucal e dietética e tratamento ortodôntico. Além disso, aspectos importantes para evitar complicações associadas à síndrome de Robinow são discutidos. Conclusão: Este caso descreve achados orais incomuns e alguns aspectos importantes para evitar complicações associadas à síndrome de Robinow. Aconselhamento profissional precoce, tratamento e acompanhamento periódico podem melhorar a qualidade de vida desses pacientes.

Assuntos

RESUMO

Introduction: Rhabdomyosarcoma is an aggressive malignant soft tissue neoplasm of immature mesenchymal cells treated with surgery and chemoradiotherapy. The effects of chemoradiotherapy in head induce a series of sequelae on oral cavity and growth development. Objectives: Report the case of a child undergoing treatment for rhabdomyosarcoma whose effects on the dento-maxillofacial development were cared for in order to safe guard the patient's quality of life. Case report: Describes a case of severe dento-maxillofacial defects resulting from chemoradiation therapy for embryonal rhabdomyosarcoma in a child as well as the dental management performed. Clinically, the patient had gingivitis, severe mobility of permanent teeth, hyposalivation, mucositis and severe trismus. The radiologic exams showed interruption of root formation of all permanent teeth and over-retention of primary teeth. Cephalometric analyses revealed mandibular and maxillary hypoplasia. Results: Was made extraction of the overretained primary teeth associated with a prophylactic program and use of artificial saliva due to hyposalivation in order to improve the quality of life of the patient. After 6 years of dental and phonoaudiologic follow-up her oral opening has increased and chewing and swallowing difficulties have decreased, there is no gingivitis or mucositis and she has remained free of recurrent or metastatic diseases 11 years after the initial diagnosis. Conclusion: Our report emphasizes the importance of dental treatment with a program of prevention and follow-up for patients undergoing anticancer therapies.

Introdução: O rabdomiossarcoma é uma neoplasia maligna agressiva de tecido mole de células mesenquimais imaturas tratadas com cirurgia e quimioradioterapia. Os efeitos da quimioradioterapia na cabeça induzem uma série de sequelas na cavidade oral e no desenvolvimento do crescimento. Objetivo: Relatar o caso de uma criança em tratamento de rabdomiossarcoma cujos efeitos no desenvolvimento dento-maxilofacial foram cuidados a fim de salvaguardar a qualidade de vida do paciente. Relato de caso: Descreve um caso de defeitos dento-maxilo-faciais graves resultante de quimioradioterapia para rabdomiossarcoma embrionário em uma criança, bem como o manejo realizado. Clinicamente, a paciente apresentava gengivite, severa mobilidade dos dentes permanentes, hipossalivação, mucosite e trismo severo. Os exames radiográficos mostraram interrupção da formação radicular de todos os dentes permanentes e retenção dos dentes decíduos. Análises cefalométricas revelaram hipoplasia mandibular e maxilar. Resultados: Foi realizada a extração dos dentes decíduos retidos associado a um programa profilático e uso de saliva artificial devido à hipossalivação, a fim de melhorar a qualidade de vida do paciente. Após 6 anos de acompanhamento odontológico e fonoaudiológico, sua abertura bucal aumentou e as dificuldades de mastigação e deglutição diminuíram, não há gengivite ou mucosite e ela permaneceu livre de doenças recorrentes ou metastáticas 11 anos após o diagnóstico inicial. Conclusão: Nosso relato enfatiza a importância do tratamento odontológico com um programa de prevenção e acompanhamento para pacientes submetidos a terapias antineoplásicas.

Assuntos

RESUMO

Introduction: Hypnosis is a technique that involves inducing a special state of consciousness in which the conscious mind relaxes while the unconscious mind manifests itself by working the imagination. Objective : To perform a literature review to evaluate the different techniques used to induce hypnosis and the need for its use in dental care, as well as, its results. Sources of data: A bibliographic search was performed in the Google Academic and PubMed databases to identify studies for review. There was no restriction on language or year. Inclusion criteria were studies that addressed the topic of interest. Synthesis of data : Hypnosis aims to improve care by controlling patients' anxiety, fear and phobias. However, its use is little known by patients and professionals in the context of dental treatment. There are two techniques of hypnosis, namely essential hypnosis and hypnosis by object fixation. The main indications are the need to control the patient's fear and anxiety during dental treatment and to prepare the patients before performing surgical procedures. It can be used in association with local anesthetics, but this combination is not essential. Conclusion : Hypnosis can be effective at controlling patients' feelings related to dental care, being the hypnosis by object fixation the most used technique with this purpose. It is considered easy, quick, painless, with low costs and accessible to any dentist who has completed specific training in this field.

Introdução: A hipnose é uma técnica que envolve a indução de um estado especial de consciência em que a mente consciente relaxa enquanto a mente inconsciente se manifesta trabalhando a imaginação. Objetivo : Realizar uma revisão de literatura para avaliar as diferentes técnicas utilizadas para induzir a hipnose e a necessidade de seu uso no atendimento odontológico, bem como, seus resultados. Fontes de dados : Uma pesquisa bibliográfica foi realizada nas bases de dados Google Acadêmico e PubMed para identificar estudos para revisão. Não houve restrição de idioma ou ano. Os critérios de inclusão foram os estudos que abordaram o tema de interesse. Síntese dos dados: A hipnose visa melhorar o atendimento, controlando a ansiedade, o medo e as fobias dos pacientes. Entretanto, seu uso é pouco conhecido pelos pacientes e profissionais no contexto do tratamento odontológico. Existem duas técnicas de hipnose, a saber, hipnose essencial e hipnose por fixação objetal. As principais indicações são a necessidade de controlar o medo e a ansiedade do paciente durante o tratamento odontológico e preparar os pacientes antes de realizar procedimentos cirúrgicos. Pode ser usado em associação com anestésicos locais, mas essa combinação não é essencial. Conclusão : A hipnose pode ser eficaz no controle dos sentimentos dos pacientes relacionados ao atendimento odontológico, sendo a hipnose pela fixação do objeto a técnica mais utilizada para esse fim. É considerado fácil, rápido, indolor, com baixos custos e acessível a qualquer dentista que tenha completado o treinamento específico neste campo.

Assuntos