RESUMO

Resumen: Los métodos de extracción de fitoquímicos convencionales presentan bajos rendimientos o largos tiempos de proceso. El ultrasonido ofrece alternativas para incrementar el rendimiento en extractos vegetales. El objetivo de este trabajo fue evaluar el efecto de tres métodos de extracción en rendimiento, composición de compuestos fenólicos, actividad antioxidante y estabilidad de extractos de hojas de Plectranthus amboinicus (oreganón). Los métodos de extracción usados fueron: convencional con agitación (EC), asistida con baño de ultrasonidos (EABU) y asistida con sonda de ultrasonido (EASU). Se usó una proporción 1:10 (p/v) orégano:etanol a 35 ± 2 °C. Los rendimientos se calcularon como materia seca del extracto (% ms). Se usó un modelo de pseudo-segundo orden para ajustar las curvas de extracción experimentales de los tres métodos y obtener los parámetros cinéticos. Se determinaron compuestos fenólicos totales (CFT) y actividad antioxidante (AA) mediante los métodos de Folin-Ciocalteau y DPPH, respectivamente. Se evalúo la estabilidad del CFT y AA durante el almacenamiento. La EASU aumentó 33.93 % el rendimiento en los extractos con respecto a EC. La mayor concentración de CFT (P ≤ 0.05) se obtuvo mediante EABU (10.32 mg EAG/ms) y para AA mediante EC (19.43 mg ET/g ms). El modelo cinético de pseudo-segundo orden ajustó adecuadamente las cinéticas experimentales. La constante de velocidad (k) de CFT más alta fue de 0.016 g ms/mg EAG·min para la EASU, siendo esta técnica la que demostró una disminución significativa de AA con respecto al tiempo de extracción. Los CFT de los extractos obtenidos mediante EABU, EASU y EC (3.7 mg EAG/g ms, 4.4 mg EAG/g ms y 7.2 mg EAG/g ms, respectivamente), al igual que la AA se mantuvieron estables y sin cambios significativos (P ≥ 0.05) durante los 34 d de almacenamiento, mostrando nuevamente la ventaja de utilizar la técnica extractiva de ultrasonidos, en función del tiempo.

Abstract: Conventional phytochemicals extraction methods have shown low yields or very long processing times for obtaining. The ultrasound offers alternatives to increase the yields of plant extracts. The objective of this work was to evaluate the effect of three extraction methods on the yield, phenolic compound composition, antioxidant activity and stability of Plectranthus amboinicus (oregano) leaf extracts. The extraction methods used were: conventional heat-assisted extraction (CE), ultrasound water bath assisted (UBAE) and ultrasound probe assisted extraction (UPAE). A 1:10 (w/v) oregano:ethanol ratio was used at 35 ± 2 °C. Yields were calculated as extract dry matter (% ms). A pseudo-second-order model was used to fit the experimental extraction curves of the three methods and obtain the kinetic parameters. Total phenolic compounds (TPC) and antioxidant activity (AA) were determined by Folin-Ciocal-teau and DPPH methods, respectively. The stability of TPC and AA was evaluated during storage. UPAE increased 33.93 % yield in extracts concerning CE. The highest concentration of CFT (P ≤ 0.05) was obtained by UBAE (10.32 mg EAG/ms) and for AA by CE (19.43 mg ET/g ms). The pseudo-second-order kinetic model adequately fitted the experimental kinetics. The highest TPC rate constant (k) was 0.016 g ms/mg EAG·min, for UPAE, this technique being the one that demonstrated a significant decrease in AA with respect to extraction time. The TPC of the extracts obtained by UBAE, UPAE and CE (3.7 mg EAG/g dms, 4.4 mg EAG/g dms and 7.2 mg EAG/g ms, respectively), as well as the AA remained stable and without significant changes (P ≥ 0.05) during the 34 d of storage, again showing the advantage of using the ultrasound extractive technique, as a function of time.

RESUMO

BACKGROUND: Betulinic Acid (BA) is a lipophilic compound with proven beneficial results in topical inflammation. Nanogels (NG) are carriers of bioactive compounds with properties that make them good candidates to treat skin diseases. OBJECTIVE: The objective of this study was to evaluate the anti-inflammatory activity of BA carried in NG. METHODS: NG were composed of a nanoemulsion and a crosslinking agent (Carbopol 940®) applied at three concentrations (0.5, 1, and 1.5 %) and three activation times (6, 12 and 24 h). In order to select the optimal formulation, the NG were characterized mechanically and micro-structurally followed by evaluation of the BA anti-inflammatory activity in an in vivo model of auricular edema. We determined the edema inhibition activity as percent weight. Additionally, the anti-inflammatory activity of NG was validated through histological analysis. RESULTS: The formulation with the best viscoelastic properties was the one prepared with 0.5% carbopol and 6 h of activation. Microstructural examination of this formulation showed mostly spherical structures with a mean diameter of 65 nm. From the evaluation of edema and the histological analyses, we established that the NG of BA produced 52% inhibition. In contrast, a conventional gel and free BA produced 28% and 19% inhibition, respectively. CONCLUSION: The NG of BA were found to be good vehicles to treat skin inflammation.

Assuntos

RESUMO

This research studied the influence of the germ components on the physicochemical properties of cooked corn and nixtamalized corn flours as a function of the calcium hydroxide content (from 0 to 2.1 w/w) and steeping time (between 0 and 9h). A linear relationship was found between calcium content in germ and steeping time used during nixtamalization process. X-ray diffraction analysis showed that calcium carbonate is formed into the germ structure to 2.1 w/w of calcium hydroxide and 9h steeping time. The presence of the germ improves the development of peak viscosity in flours, and it is related to the increases in calcium concentration in germ and the formation of amylose-lipid complexes. No significant changes were observed in palmitic, stearic, oleic and linoleic acids of corn oil. The levels of further corn oil deterioration were 2.1 w/w of calcium hydroxide concentration and 9h of steeping time.

Assuntos

RESUMO

This work is focused in the development of a modulated optical transmission system with temperature control to determine the thermal properties of biodiesels such as the cloud and freezing points. This system is able to determine these properties in real time without relying on the operator skills as indicated in the American Society for Testing Materials (ASTM) norms. Thanks to the modulation of the incident laser, the noise of the signal is reduced and two information channels are generated: amplitude and phase. Lasers with different wavelengths can be used in this system but the sample under study must have optical absorption at the wavelength of the laser.

Assuntos

RESUMO

This work presents the physicochemical and pasting characterization of isolated mafafa starch and mafafa flour (Xanthosoma robustum). According to SEM images of mafafa starches in the tuber, these starches form Lego-like shaped structures with diameters between 8 and 35 µm conformed by several starch granules of wedge shape that range from 2 to 7 µm. The isolated mafafa starch is characterized by its low contents of protein, fat, and ash. The starch content in isolated starch was found to be 88.58% while the amylose content obtained was 35.43%. X-ray diffraction studies confirm that isolated starch is composed mainly by amylopectin. These results were confirmed by differential scanning calorimetry and thermo gravimetric analysis. This is the first report of the molecular parameters for mafafa starch: molar mass that ranged between 2×10(8) and 4×10(8) g/mol, size (Rg) value between 279 and 295 nm, and molecular density value between 9.2 and 9.7 g/(mol nm(3)). This study indicates that mafafa starch shows long chains of amylopectin this fact contributes to higher viscosity development and higher gel stability. The obtained gel phase is transparent in the UV-vis region. The viscosity, gel stability and optical properties suggest that there is potential for mafafa starch applications in the food industry.

Assuntos