RESUMEN

Weight-bearing computed tomography has multiple advantages in evaluating the hindfoot and ankle. It can assess hindfoot and ankle alignment, pathology in ankle arthritis, and complications related to total ankle replacements. It is an essential tool in ankle osteoarthritis diagnostic, preoperative planning, and total ankle replacement outcomes. It allows for better accuracy and reproducibility of alignment and implant size. In addition, it has the potential to more assertively detect complications related to weight bearing.

Asunto(s)

RESUMEN

Weight-bearing computed tomography (WBCT) was introduced in 2012 for foot and ankle applications as a breakthrough technology that enables full weight-bearing, three-dimensional imaging unaffected by x-ray beam projections or foot orientation. The literature describing the use of WBCT in the treatment of foot and ankle disorders is growing, and this article provides an overview of what can be measured with WBCT.

Asunto(s)

RESUMEN

OBJECTIVES: To compare early outcomes of proximal femoral bionic nail (PFBN), Inter-TAN, proximal femoral nail antirotation (PFNA) for intertrochanteric fractures in elderly patients. METHODS: Eighty-two elderly patients with intertrochanteric femoral fractures treated at Xiangyang No. 1 People's Hospital affiliated with Hubei University of Medicine from December 2021 to 2022 were retrospectively analyzed. They were categorized into three surgical groups: PFBN (22 cases), Inter-TAN (20 cases), and PFNA (40 cases). Preoperative demographics and fracture characteristics were compared, alongside intraoperative and postoperative metrics like operative time and complication rates. RESULTS: In the PFBN group, operative time, fluoroscopy use, blood loss, and transfusion were higher, but postoperative weight-bearing, healing, and hospital stay were shorter compared to the Inter-TAN and PFNA groups (P<0.05). Inter-TAN had a significantly shorter postoperative weight-bearing time than PFNA (P<0.001). Other compared factors showed no significant differences between groups (P>0.05), including complication rates and scores at 6-month follow-up. CONCLUSIONS: PFBN, a novel surgical approach for intertrochanteric fractures in elderly patients, outperforms Inter-TAN and PFNA by accelerating early weight-bearing and hastening fracture recovery.

Asunto(s)

RESUMEN

Mechanical testing machines are used to evaluate kinematics, kinetics, wear, and efficacy of spinal implants. The simulation of "physiological" spinal loading conditions necessitates the simultaneous use of multiple actuators. The challenge in achieving a desired loading profile lies in achieving close synchronization of these actuators. Errors in load application can be attributed to both the control system and the intrinsic sample response. Moreover, the presence of friction in the setup can have an impact on the measured outcome. The optimization of setup parameters can substantially improve the ability to simulate spinal loading conditions and obtain reliable data on implant performance. In this study, a reproducible kinematic test protocol was developed to evaluate the sensitivity of the kinetic response (i.e., measured loads, moments, and stiffnesses) of a cervical disc prosthesis to several testing parameters. In this context, five ceramic ball and socket sample implants were mounted in a 6 DOF material testing machine and tested with a constant axial compressive force of 100 N in two motion modes: 1) flexion-extension (±7.5°) and 2) lateral bending (±6°). Parameters including rotation rate, slider friction, friction between the samples' articulating surfaces, and moment arm were considered to determine their effects on measured kinetic parameters. The sensitivity analysis indicated that all setup parameters except friction between the samples' articulating surfaces had a substantial effect on the results. The findings were then compared to predictions from a free body diagram to determine the optimal setup parameters. Consequently, the setup with the lowest rotation rate and employing passive sliders yielded results that were consistent with the free body diagram. This study demonstrated the significance of a comprehensive setup evaluation for reliable and reproducible testing of spinal implants, also for comparison between labs.

Asunto(s)

RESUMEN

Osgood Schlatter's disease (OSD) is characterized by pain at the tibial tuberosity provoked during knee-loading activities, and is common in adolescent athletes. The aim of this study was to characterize clinical, pain and ultrasound imaging characteristics in participants with OSD compared to controls. This cross-sectional study included adolescents diagnosed with OSD and matched controls. Following baseline evaluation including ultrasound, participants completed the following aggravating activities in a randomized order: single-leg isometric knee hold, single-leg squat, single-leg vertical jump, hopping, running, cutting, lunges, and walking. Participants rated pain intensity on a numeric rating scale (0-10; no pain to worst pain imaginable) and localization during activities. We included 35 participants with OSD (48.5% females, age 13.0 [SD 1.5]) and 21 controls (47.6% females, age 13.4 [SD1.4]). Doppler signal was more prevalent in OSD participants at the tendon (77% vs. 30%) and tuberosity (29% vs. 10%). Tendon thickness was greater in OSD at distal (mean difference = 4.5 mm 95% CI 1.5-7.5) and proximal sites (mean difference = 4.2 95% CI 0.1-8.3). Aggravating activities induced higher pain in OSD. The greatest differences between OSD and control were the dynamic single-leg squat (mean difference = 4.2 (95% CI 3.22-5.1)). Pain was localized at the tibial tuberosity and patellar tendon during activities. Sex, sports participation, bilateral pain, and Doppler were associated with greater pain during aggravating activities. Single-leg activities loading the tibial tuberosity through the tendon appear to provoke OSD-related pain more than other sports specific movements. This may be useful to guide adolescents on which activities are likely to aggravate pain.

Asunto(s)

RESUMEN

OBJECTIVE: There is currently a lack of in-depth comparative evaluation regarding the biomechanical properties of novel intramedullary nail devices in the treatment of basal femoral neck fractures (BFNF). This study aims to utilize finite element analysis to compare the performance differences of two novel devices with traditional PFNA and InterTan nails in the fixation of BFNF. METHODS: Based on a validated finite element model, this study constructed an accurate BFNF model and implanted four different intramedullary nail devices: PFNA, InterTan nail, PFBN (proximal femoral biomimetic nail), and NIS (novel intramedullary system). Under a vertical load of 2100N, the displacement and Von Mises stress (VMS) distribution of each group of models were evaluated through simulation testing. RESULTS: Under a load of 2100N, the PFBN device exhibited the best performance in terms of displacement and peak stress, while PFNA performed poorly. The peak displacement of the NIS device was lower than that of PFNA and InterTan nails, while the peak stress of the InterTan nail was lower than that of PFNA and NIS. CONCLUSION: The PFBN device demonstrates stronger load-bearing and shear-resistant properties in the treatment of BFNF, and the NIS device also shows significant improvement in stability. Therefore, both the PFBN and NIS devices are reliable internal fixation techniques for the treatment of CFIFs, with potential clinical application prospects.

Asunto(s)

RESUMEN

OBJECTIVE: To investigate in vivo 6-degree-of-freedom (DOF) vertebral motion in patients with isthmic spondylolisthesis (IS) during various functional weight-bearing activities. METHODS: Fifteen asymptomatic volunteers (mean age 54.8 years) and fourteen patients with IS at L4-5 (mean age 53.4 years) were recruited. The positions of the vertebrae (L4-L5) in the supine, standing, flexion-extension, left-right twisting and left-right bending positions were determined using previously described CT-based models and dual fluoroscopic imaging techniques. Local coordinate systems were established at the center of the anterior vertebra of L4 isthmic spondylolisthesis (AIS), the posterior lamina of L4 isthmic spondylolisthesis (PIS) and the center of the L5 vertebra to obtain the 6DOF range of motion (ROM) at L4-L5 and the range of motion (ROM) between the AIS and the PIS. RESULTS: The translation along the anteroposterior axis at L4-L5 during flexion-extension, left-right bending and left-right twisting was significantly greater than that of the healthy participants. However, the translation along the mediolateral axis at L4-L5 presented paradoxical motion under different positions: the ROM increased in the supine-standing and flexion-extension positions but decreased in the left-right bending and left-right twisting positions. The separation along the anteroposterior axis during flexion was significantly greater than that during standing, on average, reaching more than 1 mm. The separation along the mediolateral axis during standing, flexion and extension was significantly greater than that in the supine position. CONCLUSIONS: This study revealed the occurrence of displacement between the AIS and PIS, primarily in the form of separation during flexion. Symptomatic patients with isthmic spondylolisthesis exhibit intervertebral instability, which might be underestimated by flexion-extension radiographs.

Asunto(s)

RESUMEN

Ankle fractures account for 10 % of all fractures in adults. The incidence of ankle fractures is rising, particularly as the population ages. Two thirds are isolated malleolar fractures. The most used classifications are anatomical, Weber's and Lauge-Hansen's classifications. The treatment of lateral malleolar fractures may be conservative or surgical, depending on the ankle stability. To test this, a weight-bearing X-ray is required. If this is not possible on the day of trauma, it can be done 7 days later. Conservative treatment consists of a six-week immobilization in a splint or plaster cast, with weight-bearing as tolerated. Surgical treatment is mandatory for unstable fractures.

Les fractures de la cheville représentent 10 % des fractures chez les adultes. Leur incidence est en augmentation, notamment en raison du vieillissement de la population. Les fractures malléolaires isolées en constituent les deux tiers. Les classifications les plus souvent utilisées sont celles anatomiques de Weber et de Lauge-Hansen. Le traitement des fractures de la malléole externe peut être conservateur ou chirurgical, selon la stabilité de la cheville. Pour tester la stabilité, une radiographie en charge est nécessaire. Si ce n'est pas possible le jour de traumatisme, un contrôle à 7 jours peut être organisé. Le traitement conservateur consiste en une immobilisation dans une attelle ou un plâtre en charge totale en fonction des douleurs pour six semaines. Le traitement chirurgical est réservé aux fractures instables.

Asunto(s)

RESUMEN

Pododermatitis is common in penguins kept under human care. Substrate optimization plays an important role in prevention and treatment; however, there is limited information on biomechanical properties of commonly used substrates on penguin feet. The objectives were to test the ability of different substrates to decrease weight loading on the central metatarsal pad of penguin feet in an ex vivo model using feet with and without bumblefoot harvested from two Magellanic penguin (Spheniscus magellanicus) cadavers. Penguin feet were attached to a digital force gauge mounted onto a stand for compression testing at 2.5 and 5 kg. Forces at the central metatarsal pad were measured in triplicate using small force sensors. Tested substrates included five granular surfaces (sand, wet sand, pea gravel, wet pea gravel, and crushed ice), three compliant surfaces (short-leaf Astroturf, long-leaf Astroturf, and neoprene), and three firm surfaces (tile, rubber drainage mat, and 3M Safety-Walk Wet Area Matting). Data were analyzed using linear mixed models. There were multifaceted effects of applied pressures, substrate surfaces, and pododermatitis on central metatarsal measured pressures. In general, doubling compression forces resulted in higher measured pressures in all firm and compliant surfaces but not in granular surfaces. Firm surfaces were associated with higher recorded plantar pressures at 2.5 kg, but different significance groupings emerged at 5 kg with a high-, medium-, and low-pressure cluster of surfaces. Pododermatitis lesions resulted in significant alterations in statistical significance clustering among substrate surfaces and unique substrate behaviors. The results of this study could help in making recommendations pertaining to foot health for penguin exhibits.

Asunto(s)

RESUMEN

Lameness is an important veterinary and welfare concern for giraffes in human care. To date, there is limited information on the objective weight-bearing characteristics of the foot in giraffes, making evidence-based decisions for foot care and lameness treatment subjective. Eleven young-adult reticulated giraffes (Giraffa camelopardalis reticulata; median age, 3.5 yr [range, 13 mon-13 yr]), with no clinical lameness or visible hoof overgrowth when viewed from standing, voluntarily walked across a commercially available pressure-sensitive walkway. Footfalls were analyzed for force, pressure, surface area, and impulse from each foot. The weight-bearing claw was also determined based on pressure in both the front and hind limbs. The data obtained suggest that the main weight-bearing claw is the lateral claw in both the forelimbs and the hind limbs the majority of the time, but is inconsistent. The forelimbs also had greater values for all biomechanical variables than the hind limbs. The higher force and pressure suggest that giraffe forelimbs are subjected to greater biomechanical stress than the hind limbs. The relative maximum force from front limbs to hind limbs was 59:41. For these clinically sound giraffes, the center of force was consistently located in the interdigital space approximately equidistant from the toe and heel correlating with the center of mass of the limb. Furthermore, foot strikes occurred in a heel-first pattern. A pressure-sensitive walkway was well tolerated by all animals in the study and may be used in future research to help further elucidate factors that contribute to lameness in giraffes.

Asunto(s)

RESUMEN

BACKGROUND: In acetabular fracture surgery, understanding the biomechanical behaviour of fractures and implants is beneficial for clinical decision-making about implant selection and postoperative (early) weightbearing protocols. This study outlines a novel approach for creating finite element models (FEA) from actual clinical cases. Our objectives were to (1) create a detailed semi-automatic three-dimensional FEA of a patient with a transverse posterior wall acetabular fracture and (2) biomechanically compare patient-specific implants with manually bent off-the-shelf implants. METHODS: A computational study was performed in which we developed three finite element models. The models were derived from clinical imaging data of a 20-year-old male with a transverse posterior wall acetabular fracture treated with a patient-specific implant. This implant was designed to fit the patient's anatomy and fracture configuration, allowing for optimal placement and predetermined screw trajectories. The three FEA models included an intact hemipelvis for baseline comparison, one with a fracture fixated with a patient-specific implant, and another with a conventional implant. Two loading conditions were investigated: standing up and peak walking forces. Von Mises stress and displacement patterns in bone, implants and screws were analysed to assess the biomechanical behaviour of fracture fixation with either a patient-specific versus a conventional implant. RESULTS: The finite element models demonstrated that for a transverse posterior wall type fracture, a patient-specific implant resulted in lower peak stresses in the bone (30 MPa and 56 MPa) in standing-up and peak walking scenario, respectively, compared to the conventional implant model (46 MPa and 90 MPa). The results suggested that patient-specific implant could safely withstand standing-up and walking after surgery, with maximum von Mises stresses in the implant of 156 MPa and 371 MPa, respectively. The results from the conventional implant indicate a likelihood of implant failure, with von Mises stresses in the implant (499 MPa and 1000 MPa) exceeding the yield stress of stainless steel. CONCLUSION: This study presents a workflow for conducting finite element analysis of real clinical cases in acetabular fracture surgery. This concept of personalized biomechanical fracture and implant assessment can eventually be applied in clinical settings to guide implant selection, compare conventional implants with innovative patient-specific ones, optimizing implant designs (including shape, size, materials, screw positions), and determine whether immediate full weight-bearing can be safely permitted.

Asunto(s)

RESUMEN

Purpose: This study aimed to evaluate the biomechanical response or load transfer on the osteoporotic L1 vertebra under torsional loading. Methods: To achieve this goal, a numerical model of osteoporotic vertebra in various trabecular bone degenerations was developed and tested. The mechanical behavior of the model was represented taking into account the anisotropic properties of the cancellous bone, which provided a more realistic mechanical picture of the biological subsystem. To ensure the reliability of osteoporotic degradation, the thinning of cortical bone and the appearance of gaps between trabecular bone and cortical bone were also taken into account when creating the models. Results: Finite element (FE) analysis showed that the deformations of cortical bone thinning and detachment of the cortical bone from the trabecular tissue lead to local instability of the vertebra. As a result, the cortical bone of a vertebra loses its load-bearing capacity, even if the strength limit is not reached. Conclusions: The results obtained allow us to state that taking into account the thinning of the trabeculae, which creates voids, is extremely important for load-bearing capacity of osteoporotic vertebrae. However, a limitation of this study is the lack of experimental data to ensure consistency with the computer simulation results.

Asunto(s)

RESUMEN

Purpose: Tendons adapt to loads applied to them, by changing their own mechanical properties. The purpose of the study was to examine the influence of practicing sport in the form of weightlifting/strength training by individuals of various age groups upon the mechanical properties of the patellar tendon. Methods: 200 people participated in the study. Group 1 (n = 109) comprised individuals training strength sports as amateurs, group 2 (n = 91) consisted of people who were not physically active. The patellar tendon was examined in various positions of the knee joint: 0, 30, 60, 90, 120° respectively. The following mechanical parameters were measured with the use of a device for myoto-nometric measurements, MyotonPRO: frequency [Hz], stiffness [N/m], decrement [log], relaxation time [ms] and creep [De]. The results were compared as regards physical activity, training history, BMI value, and gender. Results: Stiffness and tone increased while elasticity decreased with patellar tendon stretching degree. In the group of individuals in training, greater stiffness and tone and lower elasticity were noted. Moreover, stiffness and tone appeared to be higher in elderly people and individuals with longer training experience. Conclusions: Mechanical loads connected with strength training result in development of adaptive changes in the patellar tendon, in the form of higher stiffness and tone, as well as lower elasticity. The MyotonPRO device is useful for quantitative assessment of the mechanical properties of patellar tendon.

Asunto(s)

RESUMEN

BACKGROUND: Intervertebral disc (IVD) degeneration is a multifactorial pathological process resulting in the dysregulation of IVD cell activity. The catabolic shift observed in IVD cells during degeneration leads to increased inflammation, extracellular matrix (ECM) degradation, aberrant intracellular signaling and cell loss. Importantly, these pathological processes are known to be interconnected and to collectively contribute to the progression of the disease. MicroRNAs (miRNAs) are known as strong post-transcriptional regulators, targeting multiple genes simultaneously and regulating numerous intracellular pathways. Specifically, miR-155-5p has been of particular interest since it is known as a pro-inflammatory mediator and contributing factor to diseases like cancer and osteoarthritis. This study investigated the role of miR-155-5p in IVD degeneration with a specific focus on inflammation and mechanosensing. METHODS: Gain- and loss-of-function studies were performed through transfection of human Nucleus pulposus (NP) and Annulus fibrosus (AF) cells isolated from degenerated IVDs with miR-155-5p mimics, inhibitors or their corresponding non-targeting control. Transfected cells were then subjected to an inflammatory environment or mechanical loading. Conditioned media and cell lysates were collected for phosphorylation and cytokine secretion arrays as well as gene expression analysis. RESULTS: Increased expression of miR-155-5p in AF cells resulted in significant upregulation of interleukin (IL)-8 cytokine secretion during cyclic stretching and a similar trend in IL-6 secretion during inflammation. Furthermore, miR-155-5p mimics increased the expression of the brain-derived neurotrophic factor (BDNF) in AF cells undergoing cyclic stretching. In NP cells, miR-155-5p gain-of-function resulted in the activation of the mitogen-activated protein kinase (MAPK) signaling pathway through increased phosphorylation of p38 and p53. Lastly, miR-155-5p inhibition caused a significant increase in the anti-inflammatory cytokine IL-10 in AF cells and the tissue inhibitor of metalloproteinases (TIMP)-4 in NP cells respectively. CONCLUSION: Overall, these results show that miR-155-5p contributes to IVD degeneration by enhancing inflammation through pro-inflammatory cytokines and MAPK signaling, as well as by promoting the catabolic shift of AF cells during mechanical loading. The inhibition of miR-155-5p may constitute a potential therapeutic approach for IVD degeneration and low back pain.

Asunto(s)

RESUMEN

INTRODUCTION: Adherence to wearing prescribed footwear is paramount in reducing the risk of developing diabetes-related foot ulcers, but adherence is often lower than optimal. This study aimed to investigate predictors of footwear adherence and variations in adherence and activity in people at risk of diabetes-related foot ulceration. METHODS: Sixty people at high foot ulcer risk were included. We measured the proportion of weight-bearing acitivity time the prescribed footwear was worn for seven days. Multiple linear regression and analysis of variance were used. RESULTS: Mean overall adherence was 63%. Adherence was lower at home than away from home (59% vs. 74%), while activity was higher at home (2.2 vs. 1.2 h/day). Adherence was similar across activities (61%-63%). No variable predicted the overall adherence. Higher Hba1c predicted lower adherence at home (ß = -0.34, p = 0.045, R2 = 11.6%). More daily steps predicted lower adherence away from home (ß = -0.30, p = 0.033, R2 = 9.3%). Adherence and activity were highest in mornings (71%, 1.1 h) and afternoons (71%, 1.5 h), and lower in evenings (40%, 0.8 h) and at nights (9%, 0.1 h). Adherence was similar on weekdays and weekend days (63% vs. 60%), but activity was higher on weekdays (3.4 vs. 3.0 h). CONCLUSION: Adherence levels and predictors thereof differed between adherence at home and away from home, so we suggest to treat them as different concepts. Due to the low explained variance, future studies should focus on other predictors such as psychological variables.

Asunto(s)

RESUMEN

BACKGROUND: This study aimed to examine whether the non-weight-bearing tunnel view X-ray is effective for short-term evaluation of medial meniscus posterior root tear (MMPRT) by assessing the X-ray characteristics at the initial and follow-up visits. METHODS: This was a retrospective longitudinal study of 26 enrolled knees diagnosed with MMPRT on magnetic resonance imaging. The distance between the medial tibial eminence and medial femoral condyle (MTE-MFC distance) and medial tibiofemoral joint (MTFJ) width were measured by obtaining non-weight-bearing tunnel view and frontal view X-ray radiographs. The initial and follow-up values at a median interval of 17 days were compared. Additionally, the correlations between the MTE-MFC distance increase rate and body mass index (BMI), age, femorotibial angle (FTA), and posterior tibial slope (PTS) were evaluated using linear regression analysis. RESULTS: The tunnel view images of the initial and follow-up X-rays showed a significant increase in the MTE-MFC distance and a significant decrease in the MTFJ width. Furthermore, a moderate correlation was observed between the change in the MTE-MFC distance and the time interval between X-rays. However, no substantial correlation was observed for the change in the MTFJ width over time. Moreover, no significant correlation was observed between the change in the MTE-MFC distance in the non-weight-bearing tunnel view and BMI, age, FTA, and PTS. CONCLUSIONS: The non-weight-bearing tunnel view is highly beneficial for evaluating MMPRT progression in the short term.

Asunto(s)

RESUMEN

Total hip arthroplasty (THA) is one of the most successful orthopaedic interventions globally, with over 450,000 procedures annually in the U.S. alone. However, issues like aseptic loosening, dislocation, infection and stress shielding persist, necessitating complex, costly revision surgeries. This highlights the need for continued biomaterials innovation to enhance primary implant integrity and longevity. Implant materials play a pivotal role in determining long-term outcomes, with titanium alloys being the prominent choice. However, emerging evidence indicates scope for optimized materials. The nickel-free ß titanium alloy Ti-27Nb shows promise with excellent biocompatibility and mechanical properties. Using finite element analysis (FEA), this study investigated the biomechanical performance and safety factors of a hip bone implant made of nickel-free titanium alloy (Ti-27Nb) under actual loading during routine day life activities for different body weights. The FEA modelled physiological loads during walking, jogging, stair ascent/descent, knee bend, standing up, sitting down and cycling for 75 kg and 100 kg body weights. Comparative analyses were conducted between untreated versus 816-hour simulated body fluid (SBF) treated implant conditions to determine in vivo degradation effects. The FEA predicted elevated von Mises stresses in the implant neck for all activities, especially stair climbing, due to its smaller cross-section. Stresses increased substantially with a higher 100 kg body weight compared to 75 kg, implying risks for heavier patients. Safety factors were reduced by up to 58% between body weights, although remaining above the desired minimum value of 1. Negligible variations were observed between untreated and SBF-treated responses, attributed to Ti-27Nb's excellent biocorrosion resistance. This comprehensive FEA provided clinically relevant insights into the biomechanical behaviour and integrity of the Ti-27Nb hip implant under complex loading scenarios. The results can guide shape and material optimization to improve robustness against repetitive stresses over long-term use. Identifying damage accumulation and failure risks is crucial for hip implants encountering real-world variable conditions. The negligible SBF effects validate Ti-27Nb's resistance to physiological degradation. Overall, the study significantly advances understanding of Ti-27Nb's suitability for reliable, durable hip arthroplasties with low revision rates.

Asunto(s)

RESUMEN

Accentuated eccentric loading (AEL) involves higher load applied during the eccentric phase of a stretch-shortening cycle movement, followed by a sudden removal of load before the concentric phase. Previous studies suggest that AEL enhances human countermovement jump performance, however the mechanism is not fully understood. Here we explore whether isolating additional load during the countermovement is sufficient to increase ground reaction force, and hence elastic energy stored, at the start of the upward movement and whether this leads to increased jump height or power generation. We conducted a trunk-constrained vertical jump test on a custom-built device to isolate the effect of additional load while controlling for effects of squat depth, arm swing, and coordination. Twelve healthy, recreationally active adults (7 males, 5 females) performed maximal jumps without AEL, followed by randomised AEL conditions prescribed as a percentage of body mass (10%, 20%, and 30%), before repeating jumps without AEL. No significant changes in vertical ground reaction force at the turning point were observed. High load AEL conditions (20% and 30% body weight) led to slight reductions in jump height, primarily due to decreased hip joint and centre of mass work. AEL conditions did not alter peak or integrated activation levels of the knee extensor muscles. The constrained movement task used here, which excluded potential contributions of trunk motion, arm swing, rate of descent, squat depth, and point of load application, allows the conclusion that increased elastic energy return is not the primary mechanism for potentiating effects of AEL on jump performance.

Asunto(s)

RESUMEN

This study aimed to develop and evaluate a deep learning-based system for the automatic measurement of angles (specifically, Meary's angle and calcaneal pitch) in weight-bearing lateral radiographs of the foot for flatfoot diagnosis. We utilized 3960 lateral radiographs, either from the left or right foot, sourced from a pool of 4000 patients to construct and evaluate a deep learning-based model. These radiographs were captured between June and November 2021, and patients who had undergone total ankle replacement surgery or ankle arthrodesis surgery were excluded. Various methods, including correlation analysis, Bland-Altman plots, and paired T-tests, were employed to assess the concordance between the angles automatically measured using the system and those assessed by clinical experts. The evaluation dataset comprised 150 weight-bearing radiographs from 150 patients. In all test cases, the angles automatically computed using the deep learning-based system were in good agreement with the reference standards (Meary's angle: Pearson correlation coefficient (PCC) = 0.964, intraclass correlation coefficient (ICC) = 0.963, concordance correlation coefficient (CCC) = 0.963, p-value = 0.632, mean absolute error (MAE) = 1.59°; calcaneal pitch: PCC = 0.988, ICC = 0.987, CCC = 0.987, p-value = 0.055, MAE = 0.63°). The average time required for angle measurement using only the CPU to execute the deep learning-based system was 11 ± 1 s. The deep learning-based automatic angle measurement system, a tool for diagnosing flatfoot, demonstrated comparable accuracy and reliability with the results obtained by medical professionals for patients without internal fixation devices.

Asunto(s)

RESUMEN

BACKGROUND: Running exposes the body to physiological and mechanical stresses that generate musculoskeletal injuries, such as low back pain due to large spinal loading. Increasing running cadence may reduce impact forces and spinal shrinkage. RESEARCH QUESTION: This study aimed to determine the relationship between spinal loading and running cadence. METHODS: This cross-sectional study included 15 runners from the local community (36 ± 11 years; 23 ± 2 kg.m-2, and 8 ± 9 years of running experience) who ran for 30 min (R30) and 60 min (R60) at a constant speed (10 km.h-1). The spinal loading was assessed via fine stature variation measurements before the run (baseline) at R30 and R60. Cadence was monitored via a wristwatch. The cadence ranged from 150 to 180 steps.min-1. A t-test was used to compare stature loss between R30 and R60 (relative to baseline), and a stepwise linear regression equation was used to identify the relationship between cadence and stature variation in each instant. RESULTS: There was a stature loss throughout the race (R30 = 5.27 ± 1.92 mm and R60 =7.51 ± 2.51 mm). A linear regression analysis revealed a negative relationship between stature loss and cadence, indicating that running at a faster cadence produces smaller spinal loading than running at slower cadences after R60 (R2 = 0.38; p<0.05). SIGNIFICANCE: Increasing running cadence might cause less spinal loading than running with a slower cadence, which may reduce the risk of injury and back disorders in runners.

Asunto(s)